Premiere Elements 12 automaticly cropping video without permit.

Hi Forum
I have been editing some video with premiere elements 12 from my gopro 4 and 3 in 1080p/60fps. After editing and rendering with the f4v - hd 1080p preset and when viewing the completed movie in VLC i can notice that part of the video has been cropped away and i am missing part of my footage (Picture embedded)
This is a bit annoying seeing as the preview is showing everything on screen, so my question to you is: what can be the cause of this and how do i change it to get my full footage on the video?
Beforehand thanks for the help!

Nensebense
In your introduction to your post question you specifically mention GoPro 1080p/60fps as your source, and you say that your export from Premiere Elements is a f4v file 1080p. On viewing the screenshots you posted, I assume that the top represents the F4V display in VLC and the bottom one is a view of your source.
That source does not look to me to be 1080p60 (1920 x 1080 @ 60 progressive frames per second). It looks more like 1280 x 960 4:3. Could you confirm on that point? Does GoPro 1920 x 1080 have the same "fisheye" as does its 1280 x 960. Your screenshot seems to be display "fisheye".
ATR

Similar Messages

Does premiere elements support analog video

I have DVD's of analog videos burned from a 8mm Camcorder recorded in UDF format. Does Premiere Elements support analog video for editing?

theodorepost
Thanks for what sounds like good news.
I see no need for you to convert those VTS_01_1.VOB files into anything else.
Here is my suggested plan...
a. Download and install the free 30 day tryout of Premiere Elements 12 from Adobe
b. Put your DVD disc in the DVD burner tray. Open Premiere Elements 12 to the Expert workspace.
Click on File Menu/New/Export and set the project preset for NTSC DV Standard or Widescreen (depending on whether
your files are for standard 4:3 or widescreen 16:9)...do not forget the check mark next to "Force Selected Project Setting on
This Project".
c. Then back in the Expert workspace, use Add Media/"DVD Camera or Computer Drive"/Video Importer. In the Video Importer,
put a check mark next to your VTS_01_1.VOB, a check mark next to Add to Timeline, and designate at Save In location. Then click
Get Media to put the file in Project Assets and on the Timeline.
d. Then we can gauge the situation.
Again, if possible, do not purchase the program until you have work through the tryout in order determine if Premiere Elements 12 work for your video editing/export goals and is compatible with your computer environment.
We will be watching for further developments.
ATR
Add On...If any problems (I do not expect any) with Add Media/DVD Camera or Computer Drive), we might consider Add Media/Files and Folders/ and navigate to the VTS_01_1.VOB.

Adobe Premiere Pro Automatically Crops Source Video Upon Import

This is really confusing me and I've never had this kind of trouble before. I have source videos that are 720x480, but as soon as I import them into Premiere, they are cropped to 540x480. It's not a problem with sequence settings or anything, because the imported source file is cropped before it's even in a sequence. I tried looking on-line for a solution, but couldn't find any. Does anyone know how this can be fixed...maybe some import settings that I don't know about?
Here are some screenshots to visually represent what I was saying:
This is properties of the video
This is what Premiere automatically does right after the video is imported as a source
This is a screenshot when played with VLC:
This is a screenshot when played from the source in Premiere:
Any help with this would be greatly appreciated. This video is due Saturday and all my footage is cropped, please help me. Thank you!

11. Re: Adobe Premiere Pro AND Adobe Premiere Elements 13 Automatically Crops Source Video Upon Import
My AP Elements (version 13) has exactly the same bug. I have a DVD where 25% of every VOB file's images' right border has been cut away during the inserting phase into Elements. No adjusting of frame and pixel aspect ratios, black borders narrow or wide, project settings automatic or manual do not help. Gone is gone. But the same VOB files play normally (100% image) in many other players/editors. I have experimented with VLC and Wondershare Video Converter.
On the other hand Elements is able to read correctly other DVD's VOB files. See discussion about this very same bug in Elements thread.

Premiere Elements 11 Download video from youtube.

The image was small so I dragged it to make it bigger.
I trimmed it and it plays fine. But after rendering it is jittery. Please help.

footcandles54
Unless there has been recent changes, YouTube agreement does not permit for downloads (ripping) of its videos, except as otherwise stipulated or in the case when you are downloading video that you personally uploaded to YouTube in the first place.
When I lost the original file that I had uploaded to YouTube, I was able to download from YouTube itself a .mp4 version of it with excellent quality for use in Premiere Elements or elsewhere.
ATR

Premiere Elements 9 - No Video Preview or Playback

I just installed Pre 9 and when i'm editing a project and hit play all I hear is sound, no video on the screen...I have another problem when I double click on something I imported and try to playback..All I see is a white screen and I hear the sound....I have a new Dell XPS 14 laptop with nice specs and i've been using the windows movie editor without problems so i'm wondering what's going on with Premiere Elements,
Thanks
Chris

Hallo,
I am from Germany and I have the same great problem
Win XP prof. new installed with all updates, NVIDEA 9500GT with driver 266.58, Ram 4GB (3.5 GB effective), all other drivers are actuell. Board Asus P5Q-E with Dual Core 8600. Harddisk 1 with OS and programms, Harddisk2 for data, Harddisk 3 for video only. PRE updatet from 9.0 to 9.01.
Failure:
1. When I open PRE and a new projekt the preview window (monitor) is white. On my second computer with WIN7 the preview window is black and PRE
    9.01 runs perfect.
2. When I open a DVD (created with PRE3.02), and put the files on the timeline, the video frames and audio are correct in the timeline.
3. When I start to playback the video, the marker moves at the timeline, I can hear the sound but no picture is shown at the preview window.
4. When I click left with the mouse in the preview window the actuell frame is shown and the playback stopped. When I start again, the preview window gets
    white and I can hear the sound.
5. In the "Videoimporteur" it is the same problem. The files are shown, but the little preview window is white. When I start playback it's the same problem:
   no picture but I can hear the sound.
What I tested:
1. I started PRE 9.01 and opend an other DVD (created with Premiere Pro 1.5 und Encore DVD) witch ran perfect on a stand alone Pioneer
   and a Sony DVD player and on several computers with windows media player: the same failure.
2. I thougt there was a problem with the mpeg codec so I tryed to import a avi file: the same failure, preview window is white, no picture at playback but I can
   here the sound.
3. I installed my old PRE3.02 on the same computer where is the PRE9.01 installed. Playbackfunction on PRE3.02 is well, but on PRE 9.01 the same
    failure.
4. In german videoforums I found the theme problems but nobody has an idea,
5. I contact the adobe support no answer since 6 days.
Excuse my bad english, I hope somebody can help my.
Thanks

Premiere Elements 9 Shakey Video After Render!?

Hi
I am using Premiere Elements 9 to create my videos.
For some reason when I render my videos out the material is shaky?
I've been rendering my videos to play on windows media and the format is HD720p 30
The camera I am using is a Panasonic HDC-SD200 Full HD 1920x1080 (I've been downloading the material from the SD to the computer and then uploading it to Prem that way)
Any help would be great!
Cheers!!

When you started your Premiere Elements project, which project settings did you select? (You can check -- but not change it -- underr Edit/Project Settings.)
Your camcorder shoots in a variety of formats. However, assuming you shot in HA or HG format, you should have selected the project settings for Full AVCHD 1920x1080. (Your camcorder also has options to shoot in stereo or 5.1 audio, and you must select the correct setting for it also.)
If you've selected any other project setting that would explain the stuttering you're seeing. It's an frame rater interlacing conflict. Try setting up a project as I recommend and put some test footage in it. If you then output test footge as a WMV, it should look terrific.
Note that great improvements in working with AVCHD have been made in more recent versions of Premiere Elements. Version 11, for instance, automatically sets up your project to match your video, so you would not have had this issue.

Premiere Elements 13 - crop then zoom work - output does not

New to Premiere and so probably not understanding some concepts (probably applying idea around images incorrectly to videos).
I have a an old clip I'm trying to test with - so for starters it's in 640x480, AVI format from an old Canon digicam
There is a bunch of junk on a table on the left side of the clip and I can trim some of the top as well. What I've tried:
Use Crop to remove the areas I don't want.
Then check the "Zoom" box and the remaining area "fills" the visible space in the editor - perfect so far.
But when I try to export the results to a mp4 file the results look nothing like the editor. I have some of the area from the left cropping back, and cropping i did not do on the right has now occurred so I've lost some of my actual content. I'm hoping this is a simple thing for people who use this regularly - I've had no luck on Google
Thanks in advance if you can offer a newbie some tips.

A lot depends on your source video. Some video formats are less accurately displayed than others.
What model of camcorder is your video coming from and what format and resolution is it?
What are your Premiere Elements project settings, as listed under the Edit menu?

Premiere elements not accepting video from my iphone 4s

Hi.
can't get my iphone 4s video into adobe premiere elements 10. won't accept it.

Hi.
Sure appreciate your interest and assistance.
You asked: “When you saved in Elements before what was the free space amount at the save location designated....and now what is
the free external hard drive space when you designate it as the save location for your Premiere Elements saves?”
I never designate the external hard drive as the save location. It makes a copy automatically.
Also, you mention investigating “drive speeds.” I didn’t think the external hard drive has a drive speed (?).
If it does, would that mean the external hard drive is somehow helping the desktop internal hard drive?
I’m not sure what you mean when you say: (With the plug in and out external hard drive situation), periodically check the drive letter of the external hard drive to assure
that it is not changing. That could cause some media disconnect issues for your projects if the projects source media are
stored on the external hard drive.” I think the external hard drive just makes a copy.
Let me know.
thanks.
Robert Panush

Premiere Elements 11 Audio & Video are not in sync

I am using Premiere Elements 11 for editing sermons, and recently I have noticed that in all of the finalized videos the audio and video are out of sync about half-way through the sermon. I know it is not the DVDs since they have no issues when running in a DVD player or with Windows Media Player. The DVD's that are formated after service break the sermon into three files. The files, after importing them to Premiere, read "VTS_01_1. VOB, VTS_01_2. VOB, VTS_01_3.VOB" The first file runs fine with no delay, but the last two consistently are off. When I first installed this program I had no trouble with this so I am wondering did I change something or is there a better way to do this.

terriCCC
Is your Premiere Elements 11 on Windows 7 or 8 64 bit?
How are you getting those VOBs to the Expert workspace Timeline?
Are you placing your DVD in the DVD burner tray, opening Premiere Elements 11 to use its Add Media/"DVD Camera or Computer Drive"/Video Importer with "Add To Timeline" and the ripped VOBs select in the Video Importer dialog? Or, other?
Please clarify what you are exporting your Timeline to for this playback that is out of sync...file saved to the computer hard drive or to DVD-VIDEO standard or widescreen format on DVD disc. Are you setting the correct project preset? If your DVD represents DVD-VIDEO standard is your project preset NTSC DV Standard; if your DVD represents DVD-VIDEO widescreen is your project preset NTSC DV Widescreen?
Each VOB cannot accept more than 0.99 GB. So, when more data are involved, another VOB is generated. Right now it looks like you have 3 x 0.99 GB on your Timeline. What total duration are you seeing? When you get to the burn dialog for one of these projects, what are you seeing in the burn dialog for Space Required and Bitrate.
When quality and out of sync audio occur with the ripping of the content into the video component VOBs, some have tried a seamless DVD.vob approach (combined VOBs in one file) using the computer Command Prompt and then importing the DVD.vob instead of the individual VOBs. I have written about this in a blog post.
http://www.atr935.blogspot.com/2013/09/pe-dvd-videoseamless-vob-ripping.html
I do not know if we are ready for this just yet.
Let us confirmed the details of what you are doing now as per the questions that I have asked.
Please do not hesitate to ask if you need clarification on anything that I have written.
Thank you.
ATR

Premiere Elements 8 - Edited video will not open

Hoping I can get some assistance from the gurus here! I have recently completed editing a video and uploaded to the video to the Adobe online sharing site. Problem is I cannot access it from the online site, nor will it load/display when I attempt to open from Premiere Elements. Trying not to panic; any assistance would be greatly appreciated.

Just to make sure that I am following you, you have completed the editing on a Project in PrE 8, and then did a Share to your account on Adobe.Com. For some reason, that file is not displaying on your Adobe.Com account, or at least you cannot get to it Is that correct?
Back in the original Project, can you do another Export/Share to another output AV file?
As I have never used the personal Adobe.Com site, I cannot be of any help to you there, but others know the processes and mechanics, and will likely be able to assist.
Good luck,
Hunt

How do i install adobe premiere elements 12 onto laptop without a cd drive

Hi I am needing help installing Premiere Elements 12 onto my new laptop without a CD Drive.

longhorn
What computer operating system is your Premiere Elements 12 going to run on? After you install 12, please do not forget to install the 12.1 Update using an opened project's Help Menu/Update.
An external DVD CD burner is relatively inexpensive and could be a worthwhile addition to your computer resources as n2deep suggests.
If you have any problems with the download of installation files as per John's suggested route, please consider the following web site as the source
http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
Major thought for this route, you need to read and carry out carefully the "Note: Very Important Instructions" on the web page in order to avoid an Access Denied message.
These are Adobe tryout files into which you can insert your purchased serial number during installation.
Please review and consider and then, when you have the time, update us on your progress.
Thank you.
ATR

Premiere Elements 12 - My videos have extra minutes of black space added that I don't know how to get rid of.

I just finished making a video that runs to about the 13 minute mark. After that I don't have anything on the timeline. Despite this, the duration I see when I try to export is about 25 minutes. I then watched the video to confirm that I had an extra 12-13 minutes or so of blank, black, empty space added to the end of the video. I made doubly sure that there was no tiny file a chopped off on accident or anything, there's just nothing there. This has been a recurring problem, having occurred with a 7-ish minute video being expanded to 15.

born
What computer operating system is your Premiere Elements 12 running on? Be sure to update 12 to 12.1 via a project's Help Menu/Update. Background information. For now I will assume Windows 7, 8, or 8.1 64 bit.
Now to the core of the matter and a quick way to find and correct the problem which is related to fragment beyond what you consider to be the end of your Timeline content.
1. Open the project to the Expert workspace. Expand the Timeline content maximally by taking the Zoom Out-Zoom In Slider above the Timeline all the way to the right.
2. Hit the computer keyboard End Key. That should take the Timeline Indicator to the spot where the fragment(s) is (are)..
These fragments typically present as thin vertical black lines scattered among the track contents. Could even be a file that you pushed out of the way when
you were editing and forgot you left it there. Search all tracks.
3. After you find and delete it or them, then use the End Key again to make sure that this time Timeline Indicator stops at the end of your intended Timeline content when you press the computer keyboard End key.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Premiere Elements 8 & MP4 video problem

A.T. Romano
Attached is my MP4 video from my Sanyo Xacti. When I perform a "Get Media" in Premiere Elements 8 I only see red cells in the timeline, task panel and playback monitor were red. No video images would display, only sound. Any Ideas?
Thanks APK

APK
SANY0002.MP4
According the gspot utility
Video Codec = MPEG-4 Video
Frame Size: 1280 x 720
Frame Rate: 29.97 frames per second
Sar = .1778 (16:9)
Par = 1:1
Dar = 1.778 (16:9)
Audio Codec = MPEG-4 AAC LC
48000 Hz 128 kb/s tot, stereo (2/0)
Premiere Elements 8 Import/Playback
SANY002.MP4 original. Video and Audio imported, but video presented as a bright red matte, but audio was fine.
SANY002.MP4 with file extension changed to .AVI. Video and Audio imported, but video presented as black video, but audio was fine.
Conversion Workaround Solution
Convert file to DV AVI widescreen (720 x 480 with 16:9 flag)
MPEG Streamclip (free MPEG Streamclip + QuickTime Alternative 1.81 (with free MPEG2 Playback Component) and uninstall regular QuickTime OR free MPEG Streamclip, leave your regular QuickTime installed, and buy the required Apple MPEG2 Playback Component)
http://www.squared5.com/
http://www.apple.com/quicktime/mpeg2/
MPEG Streamclip suggested settings:
File Menu/Open, to bring in your video
File Menu/Export to AVI
Then in AVI/DivX Explorer dialog:
Compressor: Apple DV/DVCPRO-NTSC
Sound: Uncompressed
Put a dot next to 720 x 480 (DV NTSC)
Field Dominance: Lower Field First
Up at top right, click on Options, set there for Aspect Ratio = 16:9.
Only if necessary, put a check mark next to Deinterlace Video.
Anything that I did not mention, leave as is.
Finally, click on Make AVI and the job is done quickly and effectively.
This gave great results with your video, and this DV AVI version worked well video and audio wise in Premiere Elements 8.
Your could use the free Prism Video Converter, but the free version is limited to 4:3, and some export types are only available in the purchased version.
http://forums.adobe.com/thread/415317?tstart=0
Prism suggested settings:
Output format = .avi
Encoder Options = DV Encoder NTSC (Direct Show)
Edit Option = check mark next to Resize Video; uncheck Constrain Proportions; set for 720 x 480.
You could also get a .wmv version from this software. Look into that if you decide to use this converter instead of MPEG Streamclip which is my favorite.
There are lots to explore with your original HD MPEG-4 and its problems with Premiere Elements 8. At one point I had this video on a jump drive. When I went to import the video into Premiere Elements 8 from this jump drive, the Media Downloader was triggered. In the intermediate part of this process, a thumbnail of the video being exported is shown in the Media Downloader Advanced dialog. Interestingly, the thumbnail in the Media Downloader showed the video clearly, but once it got into the Premiere Elements 8 media area—bright red matte looking image in Organizer thumbnail and in the Edit Mode Monitor once the video was dragged to the Timeline.
ATR

Can Premiere Elements 13 export videos at 60 FPS?

I am currently using Premiere Elements 10, and the highest quality video I am able to export for any file type is only 30 Frames Per Second. Does Premiere Elements 13 allow you to export videos at 60 Frames Per Second?
I am trying to export high quality gameplay footage captured at 60 FPS. I can import those videos into Premiere Elements 10, but since I can only export 30 FPS videos, the quality suffers.

apogue87
Whether you use Premiere Elements 10 or 13, you should have the opportunity to export to file with a frame rate of 59.94/60 progressive frames per second. You do that my customizing the preset under the Advanced Button/Video Tab of the preset.
If you post properties of your Timeline content and the export format that you seek, I will give you more specific details. You should not have to go to 13 for what you seek.
Please review and consider, and supply more information.
Thank you.
ATR

Premiere elements HD export video freezes

Whenever I export a Video from Premiere Elements 13, the playback on the exported file is messed up. It will work fine for 9-13 seconds (literally the range) and then the screen freezes and the whole thing glitches out and is effectively useless. I should not that 720p usually works but when I try to export it in 1080p it fails. The videos are filmed in 1080p. This happens using both of my Drift model mobile cameras AND my Canon regular camera.
I am running Windows 8, and the playback is using VLC media player. I just purchased Elements a few months ago.

Also, have tried exporting in all of the 1080 HD options with all of the framerate options, but my cameras film at 30 FPS

Premiere Elements 12 automaticly cropping video without permit.

Similar Messages

Maybe you are looking for