Premiere Elements 12 does not start after error message: display driver is incompatible
After successful installation and starting Premiere Elements the following error message appears: "Uncompatible display driver identified. Update the display driver for a better and faster playback performance!" Hopefully my translation from German is helpful enough. I confirmed with OK but unfortunately Premiere Elements does not start. I checked the display driver: it is the most actual one: AMD Radeon HD 7610M. Furthermore the hardware should be OK as well: ASUStek with an Intel Core i5-2450M CPU @2.5 GHz; 6 GB RAM; 64 Bit Windows 7 Service Pack 1. What can I do?
Moonkeys25
Recap...please confirm that as of this date, the problem exists with or without the antivirus and firewall(s) disabled.
Moving forward...
If you issue was specific to the display card error that you have been getting then probable conclusions
a. the ADM Radeon H7610M driver version is not up to date
or
b. the ADM Radeon H7610 M video card/graphics card installed as is is not compatible with Premiere Elements 12 on your Windows 7 SP1 64 bit
The updated driver version and the BadDrivers.txt file deletion should have corrected the problem unless there is a gross mismatch between Premiere Elements 12 and ADM Radeon H7610M.
Did you use the link that John posted to get the auto detection of the latest driver version for the ADM card?
If we have gone as far as we can with the card and its driver version angle on this, then we can try the generalized troubleshooting drills with no guarantees, just hopes
1. Delete the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. You just need to make sure to have the computer's Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
2. If "1" has no effect on the issue...uninstall, ccleaner run through time, reinstall with antivirus and firewalls turned off.
a. Control Panel/Program, select Adobe Premiere Elements 12, right click the entry and click on the Uninstall pop up. Then follow the instructions for the uninstall.
b. Download and install the free ccleaner for a computer run through to get rid of leftovers from incomplete uninstalls and installs.
https://www.piriform.com/ccleaner/download
When you are ready for this step, I will give you a step by step through the ccleaner (regular cleaning part and registry cleaning part).
c. Reinstall from your installation files or installation disc, with antivirus and firewall(s) disabled.
Please review above and then let me know if I have interpreted correctly where we are in the troubleshooting. Do not start the above plan until we are in agreement on the details and hoped for results.
Thanks.
ATR
Similar Messages
-
Adobe Premiere Elements does not open after installation
Hello,
I have written before last week. I have bought Adobe Photoshop Elements 11 and Adobe Premiere Elements 11.
I had a trial version of Photoshop Elements 11 and with the code I could access the full version.
However Premiere Elements did not open after installation. I did not had a trial version so I first downloaded the full program. I went through the whole installation process and everything seemed ok, no error messages. But when I tried to open Adobe Premiere Elements after restarting the computer it did not open at all. Nothing happened.
I have de-installed and re-installed the program for a couple of times over and over again but with not result. Also tried to download the trial version first and also this didn't work. I checked my Quicktime and updated to the latest version.
I use a Windows laptop: Asus Intel Core i5-2430M, 2,4 GHz
I hope you can help me out!
Thanks!
IngeYes I saw it but PSE (refers to Photo Shop Elements??) and I have trouble with Premiere Elements..(so the video program)
The Photoshop Elements worked.
I am not sure what to do here also the link at your reply "working with your operation system tools" didn't work..(got the "broken link error")
thanks
Inge -
Getting the message Adobe Premiere Elements could not start after silent install
I am getting the following message after running a silent command line installtion. The coomand line I am using is
setup.exe" /S /UL1033 /V"/qn COUNTRY=244 SERIALNUMBER="xxxx-xxxx-xxxx-xxxx-xxxx-xxxx" the x64 on Windows 7 64-bit.
After manually running the set-up.exe installer located in the ElementsSTIInstaller folder, Premiere elements launchs.
What is the cause of the error after running a silent installion?
JmFrxHi jam62m,
Please follow the steps mentioned in kb article : http://helpx.adobe.com/premiere-elements/kb/silent-install-instructions-premiere-elements- 4.html
and command to install Premiere elements silently is : start/wait OEM.exe /UL%LangCode% /V“SERIALNUMBER=%Adobe volume license serial number%”
Example : C:\ Adobe Premiere Elements 10/Adobe Premiere Elements 10 - 64 Bit> start/wait OEM.exe /UL1033 /V"SERIALNUMBER=1111-1111-1111-1111-1111-1111"
Regards,
Jatin Dembla -
SAP does not start-gives error message
This error has just started.
When I click the SAP icon, it does not start and it gives the error message
E - SAP - SAP Business One - SAP Business One
The color palette file couldn't be properly loaded
ThanksHi.
Have You installed something recently on that machine?
Regards. -
Premiere elements does not start
i use Adobe Photoshop Elements and Adobe Premiere Elements.
Premiere wil not start up any more.
plese help
juul18Juul18 have you removed and reinstalled the software? If so did you receive any installation errors? Please see Troubleshoot install using logs | Elements - http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you locate to this discussion.
-
Firefox does not start. constant error message: firefox.exe-bad image
The complete error message: The application or DLL C:\Program Files\Mozilla Firefox\xul.dll is not a valid Windows image. Please check this against your installation diskette. What doe this message mean? How can this problem be fixed?
You can try to disable hardware acceleration in Firefox if you can start Firefox in Safe Mode.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit) -
The cellphone does not start after error during th...
Hello everyone,
I started the software update on my N73 and received a message saying that the application (Nokia Software Update) was not working anymore and was forcing to shut down. The problem is that afterwards the cell phone cannot be started and after reading the help doc for the NSU, I tried to turn the connection between the laptop and the cell phone (I was doing this by cable) and now the device is not recognise, ergo I can't reconnect and restart the update or by that matter I can't do anything with the phone since it refuses to start.
Does anyone have any idea about what I could do to make it at the very least start again?
I'll hopefully wait for your suggestions, thank you in advance!
Maria
Solved!
Go to Solution.Dear post007. Thank you for pointing out that my posts are a waste of time. I'm sure everyone here will believe someone who has submitted under 20 posts over someone who has authored over 6000 and who has the second highest rank possible on this forum.
It just so happens that the procedure I linked to does work for some people. As such there was also a chance that it could have worked for this person too and that pointing it out was therefore not pointless.
Now, I'm not a moderator here, nor am I anything to do with Nokia other than being a happy user of many Nokia products over the years. However, I can confidently say that many here will frown upon a newcomer pointing out that information that has helped people in the past is a waste of time.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
Error message: Display driver incompatible
After installing the trial version of Premiere Elements 9.0,
I get the message "Display driver incompatible. Please update. I have a Vaio laptop purchased 10 months ago. I have the latest update of the NVidia G210 driver (187.83). I teach Premeire Elements and I need a solution to this problem ASAP.Vijay,
Sorry I was not able to get back to you faster - I had a little
"homework" to do and I needed some time to do it.
-Yes, I was able to locate BadDriver(s).txt file (my search would not find
BadDrivers but did find BadDriver!
I reinstalled PPE 7 on my Sony VPC and it works fine! I guess I do have
an incompatibility with PPE 9. I am calling Sony tomorrow for their ideas
on this problem but I will get the same run around and "reformat" solution
which I have already done once for the previous driver problem. They even
replaced the graphics card but that didn't stop the crashes with the previous
driver.
Thanks for the interest and I hope we get a solution. My trial has only 3
days left and I don't think I will get one by that time.
Joan
In a message dated 10/17/2010 11:07:06 P.M. US Mountain Standard Tim,
[email protected] writes:
jzittle,
Few queries,
Were you able to locate BadDrivers.txt file?
if yes, did you try to relaunch the PRE9 app after deleteing
BadDrivers.txt file?
if yes, Was BadDrivers.txt file created at the same location (from where
you deleted it before) again?
if yes, Could you see the details of your driver in BadDrivers.txt file?
if yes, then it seems the driver installed on your system is not
compatible with PRE9. It could be a problem in display driver.You should share your
Graphics Card and Driver information here so that Adobe can look at the
problem and work with driver vendor to solve this specific issue.
Also,
If you have different configurations for other machines, you may try PRE9
on those machines as this issue seems specific to a graphcis card and its
driver.
-Vijay -
I have installed Photoshop Elements 3.0 from original disk on my MacBook Pro with Mac OS 10.6.8. The installation was successful. However, when I try to run Photoshop Elements, it does not start, with the message "Could not complete your request because of missing or invalid personalization information". I uninstalled Adobe Elements and deleted all Adobe files from both the System Library Preferences and from the User Library Preference. Then tried the installation again. The installation was successful, but the application fails to start with the same missing/invalid-personalization-information message.
Please adviseI am sorry Invalid Personalization but Photoshop Elements 3.0 requires a PowerPC processor or Rosetta installed in order to function. You can find the system requirements at System requirements | Adobe Photoshop Elements.
You may want to try following the steps listed at Mac OS X 10.6: If you need to install Rosetta to attempt to install Rosetta. That may still not resolve your licensing issue however as the application was also designed for Mac OS 10.2.8 and 10.3. -
Why does installation not start after the message "setup wants to make changes"?
Why does installation not start after the message "Setup wants to make changes. Type your password to allow this"?
Hi
It wants your system's admin password. Standard procedure on Mac for non-admin users
Thanks -
The Connection Server does not start after an upgrade to BO4.1 SP3
Hello guys,
The Connection Server does not start after an upgrade to BO4.1 SP3
We are in process to upgrade our Business Objects environments to BO4.1 SP3
The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
Our OS is AIX
Uncaught Exception in SilentScope: [CS] Ser
verInitialization::InitManager::Initialize: 0.007^^
The CS initialization failed within the CS server. Aborting
trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
GerdHi Amine
The File seems ok
File from the failing connection server
-rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
File from our test system
-rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
I created a new connectieserver(by the copy function), but the new server won't start.
Regards
Gerd
Log
|89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
init_srv.cpp:95:-: TraceLog message 3
|4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
|77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting. -
I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project
This is the Photoshop Elements forum, not the Premiere Elements forum, located here:
https://forums.adobe.com/community/premiere_elements
When you open the project, it should ask you where the first file is located. After you tell it where it is, it should be able to find the rest of them if they are located near the first one. Then save the file. If you move the files again, you will have to relink them again. -
My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)
Did you download the Basic/Free version?
I also thought the Trial period was as long as you needed!?
What is your Warranty and Return Policy?
You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
All sales are final and there are no refunds.
Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
http://www.hamrick.com/sup.html#q -
Game does not start after installing on mac pro
Game does not start after new install on mac pro ?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
EXE DOES NOT START AFTER DOWNLOADING
I downloaded lr 4.3 but double clicking it does not open the exe. When I double click older lr downloads they still open normally.Right clicking and open does not work either. What to do?
Windows Vista Home Premium 6.0.6002 SP2 Build 6002, Intel Core 2 Quad
Q9300 2.5GHz. When I double click the download, the arrow starts rotaing
for about 30 seconds and then disappears without any new window opening
Op 17/12/2012 23:55, Jeff A Wright schreef:
>
Re: EXE DOES NOT START AFTER DOWNLOADING
created by Jeff A Wright
<http://forums.adobe.com/people/JeffAWright> in /Downloading,
Installing, Setting Up/ - View the full discussion
<http://forums.adobe.com/message/4928607#4928607
Maybe you are looking for
-
I received an error message when trying to download my recent purchase, "This computer is already associated with an Apple ID" You can download past purchases on this computer with just one Apple ID every 90 days. This computer can be used with a di
-
How-to trigger an ABAP program after a user logs on?
Does anybody know if it is possible to trigger an ABAP program just after a users logs into the system? Thanks Ioan
-
Table Name for Trip Expenses??
Hello All, I have the trip number from the table PTRV_PERIO I would now like to get the associated expenses related to that trip number? What is the table name that holds the expenses? Cheers
-
Im trying to update my iphone but it says must connect to wifi
Im cconnected to the internet and trying to update the software on my iphone but it says it needs wifi connection - but Im connected??
-
How can I reactivate my Apple ID?
Ich habe mein Konto überzogen und meine Apple.ID wurde gesperrt. Jetzt hab ich wieder Geld auf meinem Konto um die Schulden zu tilgen aber ich weiß nicht an wen , wie oder ob ich noch etwas tun muss... Wäre nett wenn jemand der sich damit auskennt mi