Premiere elements 12 on Mackbook Pro running Maverick

Premiere elements 12 on macbook pro running maverick. Crashes on opening with multi page error message.  reinstall does not help

Also, don't forget to run a Disk Verification and a Font Check on your Mac. Corrupt fonts can cause some real problems for this program.
http://forums.adobe.com/thread/940869?tstart=0
It also matters where you got your copy of the program from. The version available in the App Store has had so many problems that Apple pulled it.
There may also be issues with your Retina display, if you have that feature.

Similar Messages

  • Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

  • Hi, I have a mac book pro running mavericks and recently tried to connect to a 3rd ten apple tv but the airplay icon is not showing up in the top bar. I then tried my girlfriends laptop running mountain lion and it showed up straight away. Any suggestions

    Hi, I have a mac book pro running mavericks and recently tried to connect to a 3rd gen apple tv but the airplay icon is not showing up in the top bar. I then tried my girlfriends laptop running mountain lion and it showed up straight away. Any suggestions?

    How old is the MacBook Pro?  AirPlay is only supported on 2011 and newer models, due to the requirements it has in hardware for graphics acceleration.

  • Invites to my calendar do not appear in my calendar on macbook pro running  Maverick, but appear on my other icloud syn ios 7 ipad and iphone. Why wont the invites show on Macbook Pro running Maverick?

    Invites to my calendar do not appear in my calendar on macbook pro running  Maverick, but appear on my other icloud synch ios 7 ipad and iphone.
    Why wont the invites show on Macbook Pro running Maverick?
    All other calendar events sync fine through Icloud.

    Hi Fundads,
    If you are having issues receiving calendar updates on your Mac, you may find the following article helpful:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Regards,
    - Brenden

  • I have a new Macbook Pro running Mavericks and safari consistently freezes. It takes several 'return/enter' presses to get to the page I requested. I have seen other comments and replies on how to fix (clear cache, clear extensions/plug-ins), to no avail.

    I have a new macbook pro running mavericks and only using Safari as my browser.  75% of my url requests are 'hung up' and freeze.  I have seen other posts and have tried to clear cache, reset safari, remove extensions, but to no avail.
    Any recommendations?

    If it works in a new user account, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About

  • Connection getting lost on Mac Pro running mavericks

    We have replaced one of our old Xserve fileservers with a new Mac Pro running Mavericks.  This is one of four systems we use to reduce dense geospatial data into descriptive assets.  Up to 20 iMac workstations can be accessing data on this server simultaneously.  The problem we are experiencing since, the switch to the new fileserver, is that the workstations seem to be randomely loosing their connection to the data.  We don't have this problem with any of our four other systems configured as Xserves, running Lion.  Any suggestions or experiences that would suggest a place to start looking?

    Figured it out - there was an app that was being run at login and the hide this app button was checked on that app. The app has a dialogue box that pops up when the app starts. Because this box was being hidden it was impossible to click "OK" so the system kept trying to pop up that dialogue box, causing the app that was being used to shift to the background.

  • From about this Mac -Storage, my only HDD is full. there are 144 GB on Backups. How find and delete it. Macbook pro running Maverick OS X.

    Hi,  From about this Mac, my only HDD is full. When I have clicked and opened Storage screen when I've saw that there are 144 GB on Backups. I don't know which backup is it. and I really need help to find and delete it. I have Macbook pro running Maverick OS X.
    I have a external HDD for time machine, but this backup I didn't know yet.
    Please pleople... someone could help me?  I'm in troubles.
    Sandro

    Linc Davis,  According below:  could I delete those snapshots from MobileBackups folder?   would it solve my problem? ( if I want not my HDD 80% full)     - Thank you a lot in advance.
    Ordinarily, the best way to view your Local snapshots is via the normal Time Machine display, perquestion #15.  If for some reason that's not working, you can see them via the Finder. 
    From a Finder menubar, select Go > Go to Folder and type /Volumes in the prompt, and select theMobileBackups folder.   You'll see the same structure as for Time Machine backups on a separate volume:  a Backups.backupdb folder containing a folder for your Mac, which contains a time-stamped folder for each snapshot.  Inside each of those is a folder for each disk/partition that was backed-up, containing the same folder structure as on the original, with the contents as of the time of the backup. 
    Note that nothing in the size column is meaningful (if you Get Info on the MobileBackups folder, for example, it will show the total amount of space on the drive it's on!   It will show dashes for the Backups.backupdb folder, or any of the dated snapshot folders).

  • HT4505 I have 4 accounts on my Mac Pro running Mavericks.  From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner.  Can print from all accounts.

    Sorry, I was not given the option of posting to a Maverics community.  I have 4 accounts on my Mac Pro running Mavericks.  From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner.  Can print from all accounts.

    Hi there Ira Fletcher,
    I would recommend taking a look at the troubleshooting steps found in the article below. Note: While the article was written for printer issues, many of the same troubleshooting steps apply to scanners as well.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    -Griff W.

  • Question: How do I sync contacts from my iPad to my MacBook Pro running Mavericks?

    How do I sync contacts from my iPad to my MacBook Pro running Mavericks?
    rbarge

    Contacts sync via iCloud.
    Set up iCloud on your iPad and your MBP, with the same iCloud account on both, with the same Apple ID.
    On the Mac you set this up with System Preferences > iCloud, and have Contacts checked in the box on the right.
    It looks very much the same on the iPad, Settings > iCloud.
    If you have set this up and it's still not working, then sign out of and then back into your iCloud accounts.

  • How do I transfer Photoshop Elements 9 (download) from old Mac to new Macbook Pro running Mavericks?

    I will be replacing my Macbook Pro with a new Macbook running Mavericks and want to transfer my (downloaded) Photoshop Elements 9 to the new computer. How is it done?

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 9:
    http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

  • Premiere elements 12 won't run

    Hello.
    I have an issue with my Adobe Premiere Elements 12.
    Purchased bundle Photoshop Elements and Premiere Elements year ago and installed with no problems.
    Did not use Elements till now and when run it, it requested log in to Adobe account which I did, asked for my incense which I added but after that it started from the very beginning asking for logging in etc.
    So I un-installed it and re-installed. No issues whatsoever. Then asked to provide license detail, everything ok. When pressed Accept T&C the Premiere shuts down.
    When restarted the same thing happens - it asks for license then shuts down. I can't make it run.
    -PremiereElements_12_LS26_win64
    -Win 7 Home Premium 64bit.
    Can anyone comment on this one? 

    reset your preferences -
    adobe media encoder: https://forums.adobe.com/thread/1713540
    after effects:  http://helpx.adobe.com/after-effects/using/preferences.html
    dreamweaver:  https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
    flash:  http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
    illustrator:  http://helpx.adobe.com/illustrator/using/setting-preferences.html
    indesign:  https://forums.adobe.com/thread/526990
    lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
    muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
    photoshop:  https://forums.adobe.com/thread/375776
    photoshop elements:  http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
    premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
    if you reset and that fails, uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall.

  • Error message in Premiere Elements 4 to 9 "Running short on Memory"

    When you get the error message " RUNNING SHORT ON MEMORY" save your work > in Premiere Elements while editing with H.264 mov files in excess of 1GB is it related to the Microsoft Operating System Limit of 4GB and 2GB performance of the program to 2GB ? 

    Hi Steve,
    The H.264 mov  1920x 1080p clips are from a Canon 5D Mark II which we have been using for over two years mainly for stills. however, the movie capabilities of this camera has been used commercially  re: jazz band performances and promos. We have successfully used it to produce DVD's and Blu-Ray discs and Export to Tape. However, the one glitch we have had is importing a large number of clips into Premiere Elements 4. it will take approx 30 clips at 25mb each which can be easily rendered and then Exported to Movie as HDV/mpeg-2 Uncompressed avi,( they DELL have recommended to go to CS5 as soon as possible, which we intend to do) to be finally edited in Premiere Pro 1.5.1 as it does not like H.264 mov.
    According to Dell Technical Support Australia the 4GB Operating System Limit in Windows and the 2G performance of the 32 bit Adobe Software is causing the issue , even in our i7 Wndows Professional Quad Core with 12GB RAM. The size of some of the productions sometimes exceed  98 GB and run after transcoding  very smoothly in Premiere Pro, which never crashes, and has been used for over 3 years without problems at all.
    Regards..
    See attached screen dumps, may help ? Neither program it taking advantage of the 64 bit OS in the new Workstation of course nor the 12GB Ram as they are only 32 bit.
    Message was edited by: Bob Dix Photographer

  • Newly installed Premiere Element 13 won't run.

    I just installed Premiere Element13. The program launches but when I select either "New" or "Existing" project, a pop-up will show with the message"Adobe Premiere Element.exe - No Disk" "Please insert disk in drive D". The pop-up cannot be dismissed and the program is stuck there and won't even close. I have to go to Task Manager to end it!  I am running Windows 8.1, i5 4670K CPU, 8G RAM, 1T HD with DVD burner. Any suggestion?

    Heliossss
    I just installed the purchased version of Premiere Elements 13 on Windows 7 and 8.1 64 bit.  Interesting....
    1. Beyond the usual, there seems to be a problem with this version's Interpret Footage and Properties readings for the .mod widescreen 16:9 file
    Premiere Elements 13 Major .MOD Widescreen Concerns
    2. With the Sept 2014 tryout there was a video transition named Funnel which is not there now in December 2014 in the
    purchased version.
    3. In the Sept. 2014 tryout, there were 2 new Movie Menu themes in the Kid's Corner category (Recital and Back to School). They
    are not there in my December 2014 purchased Premiere Elements 13.
    4. There are some reports about some .m2ts files having no sound only in the Elements Organizer 13 player. More news on that.
    This just might be a problem with AC-3 (Dolby Digital) support in this particular user file in the Elements Organizer 13 player. If you run into this type of issue, please let us know.
    But, right now all is moving along nicely. Hope all is going well there.
    Best wishes
    ATR

  • CS5 Photoshop/Bridge/Suite not working on new Retina Macbook Pro, running Mavericks 10.9.2

    I recently purchased a new Retina MacBook Pro laptop running Mavericks OS X 10.9.2. I had Apple perform a data migration of all my apps and files from my older laptop onto the new one. Now when I go to open Photoshop CS5 I receive the following error message, "Could not synchronize the color settings because of a program error." Photoshop will then open but I can't do anything in the app. When I go to quit Photoshop I get this error message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the 'Get Info' command in the Finder to unlock the file or change permissions on the file or enclosing folders."
    I am able to open Bridge, however the app in entiretly is noticeably lo-res and pixelated looking, so clearly something is not up to speed there either.
    InDesign and Illustrator are also having issues.
    I have run the System Update and it does not show anything in the CS5 Suite needing to be updated.
    Please advise! Thank you.

    I do not get the Airplay icon on my Macbook's menu bar. I have checked the box in the Display settings to show mirroring options but still no icon. Airplay Display shows 'No device Detected'. Both AppleTV and MacBook Pro are on the same physical Network (192.168.1.0/24) and connected directly to my home ethernet switch (not wirelessly). I also made sure MacBook's Firewall is disable. Airplay feature use to work before upgrade to 10.9.2. As far as Home sharing from my AppleTV has a similar issue; it just does not find my MacBook after a while of loading and searching my music library. I am logged in to icloud on both devices (appletv and macbook). Also use to work before upgrade. Any ideas or recommendations. Thanks.

  • Differences between Premiere Elements 11 and Pro CS6?

    Hello,
    I would like to know the differences between Adobe Premiere Elements 11 and Adobe Premiere Pro CS6 in relation to video editing. If someone can point me to any resource on the web like a comparision chart of features, differences etc that would be perfect. I understand the Premiere Pro CS6 would have a lot of extra bell and whistles, special effects etc... but what I would like to know if there is a difference in terms of the the quality of the Final Product?
    Our needs for a video editor are very simple. We need to create simple titles and text overlay to show the name of the speaker and/or topic. A few times we the audio was not recorded on the video camcera but we do have the audio recorded for the event on a separate audio recorder in .WAV format. So we would like to sync up the video with this audio. Can this be done in Adobe Premiere Elements 11?
    And in cases where the audio was recorded with video, we would like to increase the gain/volume for the audio or clean up some hum or background noise. Can this be done in Adobe Premiere Elements 11?
    That is it, we do not need any special effects or animations etc... Please let me know if Adobe Premiere Elements 11 can help us meet our needs. If there is any other software that would be more suitable please advise.
    Thank you!
    VS

    I cannot speak for CS6.  Here are thoughts from a new APE11 user's view:
    adobe30022 wrote:
    Our needs for a video editor are very simple. We need to create simple titles and text overlay to show the name of the speaker and/or topic.
    APE11 provides simplicity and good functionality for this stated need.
    we would like to sync up the video with this audio. Can this be done in Adobe Premiere Elements 11?
    If your video and audio contain a clap, you can manually sync by sliding the audio peak along the video.  The audio wave form will be blanked out when sliding, with a frame counter showing how many whole frames you have moved the audio at each moment, so it is a "drag, stop, compare, drag another frame or two, stop, compare" process that works.  (Finer adjustment than whole frames is not possible.)  Once the sync is achieved, select both audio and video track and link them. (The stability of the sync over time will depend on the accuracy of the recorder, and can pose a problem in long recordings. )  
    increase the gain/volume for the audio or clean up some hum or background noise. Can this be done in Adobe Premiere Elements 11?
    APE11 allows adjusting the volume levels and also provides level normalization if desired, but more involved audio cleanup such as hiss and hum removal, compression, or auto gain are not available.
    Please let me know if Adobe Premiere Elements 11 can help us meet our needs. If there is any other software that would be more suitable please advise.
    You should download the APE11 trial to judge for yourself how well it will meet all your needs. 

Maybe you are looking for

  • DL2100 Accessing files over wifi on Windows 8.1

    How's it going folks, just got my small company a DL2100 for all our file sharing needs as well for accessing our stuff over the net and the my cloud features are working fine as advertised~  We have a couple of computers running and accessing the DL

  • Two finger "right click" no longer works!

    This morning using the two-finger click on my MBP 13-inch stopped working. It acts the same way as the one-finger left-click. I have rebooted the computer twice, reset the preferences twice, cleaned the trackpad surface... Nothing. To say the least,

  • I cannot access the eax gaming demo in the sb audigy experience d

    programs/creative/soundblasteraudigy/soundblaster audigy experience there is a demo for gaming/5. gaming, when I hit the play button, the monitor ssays please wait but nothing ecer happens when I try to access the 5. gaming demo in the soundblasert a

  • Message counter doesn't display on iphone

    Hi, The messages icon on my iPhone 4 used to display the number of unread messages, this function has stopped working, also there is no sound nor vibration when a message comes in. The only thing I have done recently is reset my network settings beca

  • Local Network Path?

    Hi all, I would like to construct a java.io.File that represents a resource on another machine in the local network. In Win32, the path is "\\machine\folder". I would like to know if is it possible to browse it using Java. Thanks a lot Ahmed