Premiere Elements 12 second install

I want to install Premiere Elements 12 on my second computer

Are you having a problem doing that? Do you need a link for downloading it? If so, or if you need other help, go to the following page:
Download and Installation Help -
https://helpx.adobe.com/download-install.html

Similar Messages

Premiere Elements 8 new install - all menu items grayed out

New install of premiere elements 8. Installed 8.0.1 patch successfully. Installed Quicktime.
SYSTEM
Windows 7 64-bit
Dell Inspiron 660
8 GB RAM
1 TB hard drive, 700 GB available after install
All menu items are greyed out except for File | New, Open, Exit and some Help menu items. Will create a project but then does nothing. Reopening the empty project results in Elements/Pro compatibility message. Unusable.

Thank you ATR. I followed your sequence of checks. RESOLVED BY DISABLING PORTION OF AV FUNCTIONS BEFORE LAUNCHING APPLICATION. Here are the steps.
I had not even tried Premiere Elements Organizer. When I did, it appeared to run fine and actually the AutoAnalyzer Options only appear under its Preferences menu, I later found out. Those options were then disabled with no change to the issue.
I removed and reinstalled the program with an internet connection and McAfee firewall and AV off. And then ran the program with an internet connection. No change.
I deleted the Adobe Premiere Elements Prefs file first, and then the whole 8.0 Folder in which the Adobe Premiere Elements Prefs file exists. No change.
The program was installed in the default c: drive location so no change there.
The problem went away with antivirus and firewall(s) disabled!. I narrowed it down to what McAfee calls "Real-Time Scanning" under "Virus and Spyware Protection." The level of control McAfee LiveSafe-Internet Security affords under "Real-Time Scanning" is not very detailed. The setting that makes the difference is under "Scan These Files" is "Programs and documents only" instead of the default "All files (Recommended)."
Now going back upstream, I enabled the firewall fully. Firewall makes no difference if I shut it off globally or allow individual program exceptions...it still runs fine. I also enabled all the AutoAnalyzer Options and program still runs fine. Perhaps this is a rabbit trail for non-resource-limited systems.
Hopefully this helps others with the same problem.
sf

Can Photoshop Elements 10 & Premiere Elements 10 be Installed on 3 Computers?

Can Photosop Elements 10 & Premiere Elements 10 be Installed on 3 Computers

For PSE you can have activated copies on two computers only. If you had it installed on a third computer you would need to deactivate one computer to be able to use it on the other two.

Downloading online content (extra titles, menus, etc) to a different computer from where Premiere Elements 13 is installed

Can you download online content (extra titles, menus, etc) to a different computer from where Premiere Elements 13 is installed, and then transfer it to the offline computer where PE13 is installed?
I purchased a new computer and installed Premiere Elements and Photoshop Elements 13 while I had the computer connected to the internet. I no longer have the computer online, so can I download the extra content to a different computer, then transfer it to the offline computer where Premiere Elements and Photoshop Elements are installed?
Thank you very much for your time.

sfultz74
The Content download is only from within the opened project/program (disc menu display - customization area) and requires an Internet connection.
When it comes to Content download, you should be able to transfer the Online Folder (with all its content already downloaded) on computer 1 to a USB Flash Drive and use that USB Flash Drive for the replacement of the existing Online Folder in computer 2. Please see details...
http://www.atr935.blogspot.com/2013/05/pe11-no-content-disc-content-downloads.html
This all depends on the content in Online Folder from computer 1 being downloaded from within the program. All the blue bans in the upper right corner of the display thumbnails gone before transferring Online Folder from computer 1 to USB Flash Drive.
Please let me know if you have further questions on the above or need any clarification.
Thank you.
ATR

Adobe premiere elements 12 not installing on iMac 17

hello,
I am trying to install Adobe Premiere Elements 12 onto my iMac 17, i go through the install process, agree the terms and conditions, enter my serial number (correctly), select where on my mac i would like it to be installed to and it begins to instal. Standard right?
However it only ever gets to 2% before the installation fails. When i hit the button to ask for a description of the error it opens up my web browser and gives me the following info.
Exit Code: 15
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 0 error(s)
What's going on? It did this when i was trying to install the trial version and it's doing it now with the disc!

When i run disk utilities i can see the premiere elements 12 disks in the laft hand payne but when i click on them nothing appears in the right hand payne for me to select, therefore repair disk permissions is left greyed out. Ideas?

Can I install Disk 2 of Photoshop Elements 10 + Premiere Elements 10 after installing Disk 1?

I have Windows 7 with 64-bit and when installing Photoshop Elements10 and Premiere Elements 10, I realized after the fact that I should have installed Disk 2 instead of Disk 1. When trying to uninstall, I got a message that I would lose my license to reinstall on this computer. Can I install Disk 2 with Disk 1 already installed?

For more details on Discs : http://helpx.adobe.com/photoshop-elements/kb/install-premiere-elements-photoshop-elements. html

Premiere Elements 12 Silent Install

Hello, we are trying to deploy Premiere Elements 12 silently. We have followed the instructions for Premiere Elements 10.
We created the Application Override file (apllication.xml.override) with the following lines
<?xml version="1.0" encoding="utf-8"?>
          <Configuration>
                    <Payload>
                              <Datakey="EULADelay">0</Data>
                              <Datakey="Registration">Suppress</Data>
                              <Data key="Updates">Suppress</Data>
                    </Payload>
          </Configuration>
We edited the ABcpy.ini file to as follows:
[OEM Install]
SERIALNUMBER=
INSTALLDIR=
DISABLEEMSFEATURES=1
DISABLEOLSFEATURES=1
STARTMENULOCATION=
SMARTSOUND=1
Then we run the command line as follows:
OEM.exe /UL1033 /V"SERIALNUMBER=[serail number removed by moderator]"
We skip the Start/Wait as we are deploying it via SCCM.
The program installs but it's not registerd.
WHat are we missing or is the deployment different for Version 12. We had the same issues with version 11 and never got it to work.
Thanks,
Jean St.Godard
Network Manager
Pembina Trails School Division
[private contact info removed by moderator]

Moving this discussion to the Creative Suite Enterprise Deployment forum.

Premiere elements did not install

I purchased photoshop elements and premiere elements 11 (windows, english) from adobe by digital download. Apparently only photoshop elements installed. How do i install premiere elements? I am on Windows 8 OS.

Have you downloaded the install files? If so then you will want to run the installer for Premiere Elements. You can find more details at http://forums.adobe.com/thread/1006208?tstart=0&promoid=KBHJQ.

Getting Premiere Elements 11 to install on my upgraded OS (Vista to Win 7)

I recently upgraded my PC to run Win 7 (64 bit). I did a clean install of the OS so I need to reload my software. I purchased PhotoShop Elements 11 with Premiere last year. Both ran well on my Vista 64 bit OS. PhotoShop installed with out a problem but the installer gives me this excuse for not installing Premiere. "This installer does not support installation on a 64-Bit Windows operating system. If you are installing by browsing through the disk content, then please run the "Setup.exe" from the folder "Adobe Premiere Elements 11\PRE 64". If you are not installing from the disks please download the 64-Bit version of Premiere Elements 11." Odd message since it had no problem installing and running on Vista 64bit.
I don't have a disk so can anyone tell me where I can find the 64-Bit version of Premiere Elements 11 to download?

You can download the 64-bit trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
Photoshop/Premiere Elements 11:
http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l

Premiere Elements will not install!

Uninstall, reinstall the result is always the same; I end up with error: 1. Very frustrating. Does anybody know how I can fix this? Thank you.

octopodian
Thanks for the reply.
The QuickTIme issue may be our clue here; so let us explore that.
Both Premiere Elements (any version) and QuickTime (from what I have read) need to be run from a computer User Account with Administrative Privileges.
So, I am speculating that if you install and run Premiere Elements and QuickTime from a User Account with Administrative Privilege, both programs will work.
Please see
Control Panel/User Accounts and Family Safety/User Accounts. Do you find the User Account that you are currently using, and does it have the word Administrator underneath your ID there?
If you can get a the desktop icon for QuickTime, right click the QuickTime icon and select Run As Administrator.
Let us get this factor ruled in or out.
We will be watching for further developments.
Thanks.
ATR
Add On...what version of Premiere Elements are you using? I see the computer operating system mentioned by not the Premiere Elements version involved.

Photoshop & premiere elements will not install because of a failure to install shared tecnologies

moving to a new computer running Windows 7 home 64 bit. programmes installed first time and ran on my old computer which ran the same os only 32bit

Hi walter pollo,
Welcome to the Community!
Check this link for troubleshooting steps: http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_
Thanks!
Ankit

Should I uninstall Premiere Elements 10 before installing Elements 12?

I got Elements 12 today, but I would like to know if I should uininstall Elements 10 first.

John,
There is no reason to do so. The two versions can co-exist quite nicely. PrE 12 will install into a different folder structure, from your PrE 10 installation.
Many users keep the older version(s) installed, until they have learned the newer version - there are some significant changes between PrE 10 & PrE 12. Then, when they are fully up to speed with the newer, might consider Uninstalling the previous. A few users keep each older version, because one might do something better, or for testing purposes in the forums. I have a few older versions, and at least two users have about everything, going back to about PrE 4.
Good luck,
Hunt

Why doesn't my Adobe Photoshop Elements 9 & Adobe Premiere Elements 9 work/install correctly on my new computer? Why do you reference customer service phone numbers that only try to sell you additional unrelated services? Why do you give out phone numb

Just post, answer, and correctly respond!

This is a user to user forum where experience users give up their time to try and help those with problems.
You will find that Adobe does not support old versions and so your only hope is to describe your problem here and someone will most likely be able to help. So far we have nothing to go on.
You might like to read this as to the information we might need.
FAQ: What information should I provide when posting, or What do you need to know to solve my issue?
Brian

Premiere Elements 11 gives error "encountered a problem installing shared technologies" and does not install.

I have Photoshop Elements 11 installed but Premiere Elements will not install due to the problem installing shared technologies. I would appreciate any suggestions as to how to fix the issue. I tried the installation several times.

205EdMLewis
On what computer operating system is your Premiere Elements 11 running on? For now I will assume Windows 7, 8, or 8.1 64 bit. Are you installing the program from
an installation disc or from installation files?
The Shared Technologies error is an old story that afflicts several versions of Premiere Elements on several different computer operating systems. My encounters with this error
have been using installation disc for the program involved.
There are numerous home remedies. The one that has been working for me lately and consistently has been the disabling of the OOBE Folder which is found
Local Disk C
Program Files (x86)
Common Files
Adobe
and in the Adobe Folder is the OOBE which you disable by changing the folder name from OOBE to OLDOOBE.
Please let us know if that worked for you.
Do not give up.
ATR

Msiexec error when installing Premiere Elements

I had a very disappointing time with support and still cannot install my new copy of PS Premiere Elements.
I downloaded the softare. Installed the PS Elements. It was smooth.
I then tried to install Premiere Elements and it does not work.
When I started the .exe it asked for a place to extract files. I did this. Then it tried to install. But after a while I get this box with the msiexec commands listed in it. Eg.
Windows ® Installer. V 3.01.4001.5512
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
                </package | /i> <Product.msi>
                                Installs or configures a product
                /a <Product.msi>
                                Administrative install - Installs a product on the network
                /j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
                                Advertises a product - m to all users, u to current user
                </uninstall | /x> <Product.msi | ProductCode>
                                Uninstalls the product
Etc etc etc.
And then finished with an error that it was not installed.
I then manually clicked on setup.exe I then got a screen asking for language, but then I get a windows showing again options for using msiexec command.
When I try using the Adobe Premiere Elements 10.msi then i get an error
Adobe Premiere Elements 10 - Setup
Install Adobe Premiere Elements 10 using the setup.exe in the root folder.
I called support. They had me extract files into a folder off of eg C:\PS
I did this. Started the setup.exe, Same error as above msiexec.
He then had me install it with the runas administrator. I tried same error.
He then told me to create a new account on the computer with admin privileges. I didn’t really like this, but I did this . And restarted the setup but still same msexec error.
The support person said it was an admin error. Sadly I think he is wrong, he just read the message and quickly gave the first thing he could think of. I asked him why he felt that, and he said based on the error. However sadly I don’t believe he is understanding the “error” He saw the words “Administrative install - Installs a product on the network” (see above) and quickly said oh its an admin problem. I didn’t realize at the time that this is not really an error message regarding the administrator, but just the output of a badly formed command, with a default output of a badly formed command.
Let me explain..
What I believe is that somehow the script that is running the install is trying to run the msexec program and the output is simply the output of the msexec program when the parameters are not right. In fact if you open a dos prompt and type msiexec you get the exact same output. The error is not really an error but just the output like any other of a command with no perimeters. Like if you type defrag or copy from the command prompt with out the right parameters. The command gives a response. For some reason the support person saw the word “administrator” and quickly jumped to the conclusion oh its an administrator issue that was the error. The support person kept asking me if that was all and was definitely trying to get rid of me. It quite frankly was very disappointing that he didn’t know this how to resolve the issue and just wanted me to go away.
Can anyone tell me how to install this program. I am on a domain and have both domain and local passwords. Im using windows XP.
By the way I tried using
ok, i fnally was able to extract the files, enter serial numbers, and run the program, I'm testing the program now
the problem is adobe's fault, a faulty script or something on the dvd.
in my situation, to get this program installed, i decided to do the following:
1) optional: copy the install dvd to hard drive.
2) locate the adobe premiere elements 10.msi file.
3) type in    msiexec /a "adobe premiere elements 10.msi" /qb TARGETDIR="C:\tempfolder"
to unpacked the msi archive.
4) go into the c:\tempfolder/programfiles/Adobe
5) optional: copy or move the Adobe Premiere Elements 10 folder into your c:\Program Files\Adobe folder so it sits with the rest of your adobe programs
6) you have to make your own desktop icon
7) when you go into the premiere elements folder click on Adobe Premiere Elements.exe to start the program
8) it may tell you to download the Adobe Application Manager from http://www.adobe.com/go/applicationmanager
so download it if necessary. the ApplicationManager2.0_all.exe file will silently install.
this does work HOWEVER, it doesnt really install it with all the registry etc. and doesnt integrate it into the PSE. So I dont think this is really the right option.
Oviously it should install properly. (thanks anyway)

Thanks Jeff for helping.
The version of the install software is definetely 32 bit. eg its PremiereElements_10_LS15_win32.exe with the corresponding win32 zipped file.
BTW the fact that I can extract the files and then run the program as a stand alone program means I think? that it is the right version and can run on this computer. Its obviously an install issue it seems.
The version of XP i have is XP prof sp3 version 5.1 build 2600.xpsp_sp3_gdr.101209-1647
Based on your comment regarding the install version, I found and downloaded the 4.5 version of the msiexec software. Tried to install the PE again and got the same error ... EXCEPT that now the output comes from the 4.5 version instead of the previous version. eg.
Windows ® Installer. V 4.5.6001.22159
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
etc etc.
So obvously the new installer got installed, but still the install process doenst work.
Any further ideas.

Premiere Elements 12 second install

Similar Messages

Maybe you are looking for