Premiere Elements 12 will not launch while using McAfee Host Intrusion Prevention Service

We are planing to use Adobe Premiere Elements 12 in our corporate enviornment and it appears as though the product installs without issue but fails to launch. After troubleshooting the issue it appears as though the application is trying to do something that the McAfee Host Intrusion Prevention Service is catching and thus preventing the application from launching. If the McAfee HIPS service is stopped the application will launch without issue - so far we have been unable to identify the reason for this and were hopeful this may have been brougt up before?

keehola
I am not sure if you aware but we are not Adobe here at the Adobe Premiere Elements Forum. Rather user to user.
If you want Adobe, then you will need to contact it through its Adobe Chat.
Contact Customer Care
I have setup the link for
Premiere Elements
Adobe ID and Sign In
Adobe ID, Sign In, Account Help
Chat Panel (it currently has an active Panel)
If the link does not hold its set, then you will need to navigate the link to Chat Panel using the above titles as guides.
Because of the complexity of your issue, I strongly encourage you to contact McAfee.
I am in no way affiliated with McAfee or Adobe.
ATR

Similar Messages

  • My premiere elements will not started

    I have Premiere Elements 11, reg. on 13-05-2013 number [S/N Removed]
    The program is after a computer crash new installd. 't will to be de blue/purper startscreens and hold there.
    Here stopt the program and via taakbeheer i can away from the program.
    Wat think you is the problem??
    And how i can start Premiere Elements 11.
    Now i go to windows moviemaker for emergegy .
    [Image altered to obscure the S/N of the product]
    Message was edited by: Bill Hunt

    One common cause of PrE hanging on launch is the video driver. While not the only possible cause, I would check this out first.
    What OS and version are you running?
    What video card do you have, both make and model?
    What is the date and version of your installed video driver?
    If you go to the mfgr's. Web site, say nVidia, or AMD/ATI, is that the latest version of the driver?
    If not, download and install the latest, reboot and test.
    Good luck,
    Hunt

  • Premiere Elements will not run - HELP

    This is infuriating as I had the same problem with PE 8.  I have installed the trial version of PE10 and when I run the application I get the "Welcome to" screen but when I click on either start new project or open project in seems to go through lots of start up loads, then - nothing.  The last thing it does is say "loading Importerquicktime.prm" then it dies leaving the "welcome to" screen.  What is wrong please.  I had loads of issues with PE 8.  It is not looking good for this latest version.

    Buy and install a 2nd internal hard drive for all of your video files and projects... 7200rpm and not a "green" drive
    Or, use an eSata external hard drive... again, 7200rpm
    My 3 hard drives are configured as...
    1 - 320Gig Boot for Win7 64bit Pro and all program installs
    2 - 320Gig data for Win7 swap file and video project files
    When I create a project on #2 drive, the various work files follow,
    so my boot drive is not used for the media cache folder and files
    3 - 1Terabyte data for all video files... input & output files (*)
    (*) for 4 drives, drive 3 all source files & drive 4 all output files
    Search Microsoft to find out how to redirect your Windows swap file
    http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
    http://forums.adobe.com/thread/784220?tstart=0
    Trying to use only ONE Hard Drive for Video Editing
    You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
    Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
    You as a person cannot do both at the same time with the same hand
    A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
    You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
    I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
    Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
    Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
    A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
    http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

  • Premiere Elements will not open

    I have been using Premiere Elements 11 for some time. It has been working fine. Recently, it won't open. There is a message which says to uninstall and reinstall he product. I have done that. No help. The message says to contact Adobe support and mention Error:1 Can you help?

    Pekin Grey
    Here is an Premiere Elements 12 Error 1 story with a happy ending. Please check it out and see if any of it works for you with your Premiere Elements 11 problem. At this point, I do not think that product licensing has anything to do with your issue, but time will tell.
    http://forums.adobe.com/message/6124261#6124261
    In the above link the user sought alternative installation files and that worked to resolve the issue as described in the link.
    If you were to follow that approach, you could download Premiere Elements 11 tryout files from the following link and then insert your purchased Premiere Elements 11 serial number in it.
    http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
    The above web site offers the tryouts of some earlier versions but does not sell them.
    For this to work for you, you must read very carefully the Note: Very Important Instructions at that web site. Otherwise you will be greeted by Access Denied.
    Please consider and then let us know the outcome.
    Thank you.
    ATR
    Add On...I forgot to ask. Are you working from installation files purchased from Adobe or from a purchased installation disc that came with boxed packaging of the product? If the former, you could always get another download of the product at "My Orders" or "My Products" at Adobe.

  • Display driver problem - Premiere Elements will not start

    Premiere Elements 10 will not run on my computer unless I downgrade to an old display driver. I would do this but it causes other problems.
    I am using the most recent driver from NVidia (but a pretty old display card).  I get this message: "We have detected an incompatible display driver... driver details: NVidia Geforce GTS 250/pCIe/SSE2 3.0.0"
    On Windows 7
    Can anybody help with this?

    Have you manually gone to the nVidia web site and downloaded the latest driver?
    http://www.nvidia.com/Download/index.aspx?lang=en-us
    This fixes about 95% of these types of issues.
    Also, you definitely do have a BadDriver.txt file on your computer. And you may need to delete it to clear this error.

  • Premiere Elements will not install!

    Uninstall, reinstall the result is always the same; I end up with error: 1.  Very frustrating.  Does anybody know how I can fix this?  Thank you.

    octopodian
    Thanks for the reply.
    The QuickTIme issue may be our clue here; so let us explore that.
    Both Premiere Elements (any version) and QuickTime (from what I have read) need to be run from a computer User Account with Administrative Privileges.
    So, I am speculating that if you install and run Premiere Elements and QuickTime from a User Account with Administrative Privilege, both programs will work.
    Please see
    Control Panel/User Accounts and Family Safety/User Accounts. Do you find the User Account that you are currently using, and does it have the word Administrator underneath your ID there?
    If you can get a the desktop icon for QuickTime, right click the QuickTime icon and select Run As Administrator.
    Let us get this factor ruled in or out.
    We will be watching for further developments.
    Thanks.
    ATR
    Add On...what version of Premiere Elements are you using? I see the computer operating system mentioned by not the Premiere Elements version involved.

  • Premiere Elements 11 not launching on MacBook Pro

    Is there any tips or trick to get PE 11 to launch on my Macbook Pro? It shuts down or I get the spinning beach ball everytime I open it. I have tried uninstall/reinstall. This doesn't work either.
    HELP!!
    Ainsley

    Ainsley
    Are you working with Premiere Elements 11 Mac (purchased from Adobe), Adobe Premiere Elements 11 Editor (Mac Only) from the Mac App Store, or Premiere Elements 11 Quick Editor (Mac) from the Mac App Store?
    Is this a "worked before but not now" or "it never worked before" issue?
    Do you have the latest version of QuickTime installed on your computer with Premiere Elements 11? Have you checked your permissions?
    More later.
    ATR

  • Unable to validate my serial number for purchased version of premiere elements will not connect to internet even though my connection is ok

    i have purchased an official copy of premier elements 13. i have my serial number etc but when i go validate my sign in throgh my internet connection nothing happens. its a nightmare !! I cannot even find out how to generate a rerquest code for offline valiodation. clicking on "generate response code " does nothing. I have jjust spent £79 on this product. will someone please help. ther is nothing wrong with my internet connection.

    Hi, A.T.R
    Thank you so much for your common sense reply. I contacted Adobe via their online chat help facility. One of their tech guys resolved the issue by re-setting the Hosts file. Now I have seen this in the forums and it basically involves making a back-up copy of the Hosts file deleting certain entries and applying again.. Thankfully this worked for me. But I would urge Adobe to look into this matter as there are many novices I am sure will be extremely frustrated at what should be a straight forward approach when validating their software. Most people would know there internet was working ok and most people would be able to disable anti-virus software etc, but to continue getting a failure to validate a serial number online would in my opinion beggar belief !! for most technically minded folks out there. Most annoying.
    When anyone purchases legacy software from Adobe, no one wants this kind of problem. The software is not cheap.
    My purchase was Adobe Premiere Elements 13 and it is a great piece of software for video editing. I can however recommend it. It is very good for both novice and professionals
    Thank you.

  • Photoshop + Premiere Elements 11 not launching/registering/opening?

    Dear Community,
    I have researched the above topic in many forums but could not find any solution?
    Bought the elements PSE & PRE on CD, have the serial numbers. I am running Windows 8 (64bit) and have installed both PSE and PRE on Program Files (x86).
    Followed the instructions, entered the serial numbers for both and did a system restart.
    When launching both programs from desktop nothing happens after "Adobe Software License Agreement Screen".
    Have tried to run with administrator and progressed beyond "Adobe Software License Agreement Screen", but was promted to enter serial numbers again and after that nothing happened still.
    I have tried other solutuions, uninstall/re-install, disable anti-virus, registering products on Adobe site etc.
    Please help because I might have to return the software.
    I have been using Photoshop in different versions over a number of years.
    Tiaan Viljoen

    Problem found!
    After receiving support from Adobe I was instructed to delete the "cache" file in:
    C:\Program Files (x86)\Common Files\Adobe\Adobe PCD\cache
    That worked.
    Thank you,
    Tiaan

  • Photoshop and premiere elements will not start

    If there has been an answer, I apologize for asking, I'm haven't gotten any answers from adobe chat and have reached frustration!
    I have photoshop and premier elements 9 on windows 7. They worked fine for about a year then both recently stopped working, they didn't open. So I uninstalled and reinstalled from the disk and they worked.
    A few days later, the same story. They stopped opening. I've only installed the programs on this one computer.
    I could reinstall again and see if that works, but I think there is a 2 computer license which I might have reached since I couldn't deactivate before reinstalling because I couldn't access the program. It also seems silly to reinstall every time I need to use it.
    All ideas appreciated!
    Anne

    Bypass the Unwelcome Screen by creating Desktop shortcuts for the Organizer and the Editor, and restarting your computer.
    The Editor's executable is:
    "C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
    The Organizer's executable is:
    "C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
    The Unwelcome Screen leaves a zombie process running which prevents the actual program from launching again.
    Ken

  • Photoshop & premiere elements will not install because of a failure to install shared tecnologies

    moving to a new computer running Windows 7 home 64 bit. programmes installed first time and ran on my old computer which ran the same os only 32bit

    Hi walter pollo,
    Welcome to the Community!
    Check this link for troubleshooting steps: http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_
    Thanks!
    Ankit

  • Premiere elements12 will not accept ADOBE ID that worked for photoshop elements 12, help

    premiere elements will not accept ADOBE ID that worked for photoshop elemets 12

    katmama
    From one of your prior threads, you appear to be working in Windows 8.1 64 bit with your Premiere Elements 12.
    Where are you when you say that Premiere Elements 12 will not accept your Adobe ID - are you at the Sign In dialog step of the end of the
    installation? Whatever the location, what is being rejected or not recognized specifically - can you tell if it is the Adobe ID or password?
    Are you working with antivirus and firewall(s) disabled?
    Please check out the following troubleshooting steps and let us know if any of them worked for you
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
    Do you have more than one Adobe ID with Password Account?
    We will be watching for further developments and will have more comments based on your reply.
    Thank you.
    ATR

  • Callmanager 4.3 and McAfee Host Intrustion Prevention

    Will Callmanager 4.3 support McAfee Host Intrustion Prevention 7.0? Or will it completely hose it? Yes or no, is there any documentation supporting this conclusion. I've been searching the web to no avail and this seems to be the only place to get some assistance.
    I would greatly appreciate the help.
    Thanks and have a great day!

    Here is whats supported
    http://www.cisco.com/en/US/customer/prod/collateral/voicesw/ps6788/vcallcon/ps556/prod_bulletin0900aecd800f8572.html
    TAC will probably tell you the same thing... if its not on the list, probably dont use it or use at your own risk

  • Premiere Elements 11 Trial Will not Launch

    Premiere Elements 11 Trial Version will not launch on my laptop which is only 4 weeks old. OS Windows 7 - all windows updates are up to date and latest version of quicktime installed

    HI Thanks for getting back to me - no warnings appear at all - the purple opening box with all the names comes up but then that disappears and nothing else happens
    Date: Wed, 5 Dec 2012 02:18:04 -0700
    From: [email protected]
    To: [email protected]
    Subject: Premiere Elements 11 Trial Will not Launch
    Re: Premiere Elements 11 Trial Will not Launch created by Mylenium in Downloading, Installing, Setting Up - View the full discussion
    Does it trigger any warnings?
    Mylenium
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4897658#4897658
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4897658#4897658
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4897658#4897658. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Since I uploaded the new OS X Mavericks the App Store, Messages, Notes, Calendar, Maps and Preview will not launch/open. In Finder cannot find my files. Most crucially cannot upgrade OS X Mavericks software. I had two apple ID's, the old one not used

    Since I uploaded the new OS X Mavericks the App Store, Messages, Notes, Calendar, Maps and Preview will not launch/open. In Finder cannot find my files. Most crucially cannot upgrade OS X Mavericks software. I had two apple ID's, the old one not used

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Maybe you are looking for