Premiere Elements 13 (demo) freezes every 5 minutes...
I'm currently looking for a new photo editor, so I'm trying the elements 13 demo and so far I start to like the program (except why is there no option to fill your texts with gradients? what's so damn hard about that?) But this program freezes every freaking time within 5 minutes.
I'm using the Elements 13 editor in expert mode, the program creates ~50% CPU load and that's it, I can't do anything...
system:
windows 7 x64
core2duo e8400
4 GB RAM
AMD HD 7850
The recommended forum post didn't work out. What appears to have worked, at least to this point, is the following:
Boot into OS X Recovery (restart your Mac and hold down the Command and R keys at startup).
Open Disk Utility and select your primary volume.
Click Verify Disk and if prompted, click Repair Disk.
Click Verify Disk Permissions and if prompted, click Repair Disk Permissions.
Exit and restart.
Premiere Elements 13 should function normally.
In my case I ran both Repair Disk and Repair Disk Permissions. It's been about 3-4 days after applying this and PE 13 no longer randomly crashes.
Similar Messages
-
Firefox freezes every few minutes for a few seconds.
Firefox keeps freezing every few minutes, for a few seconds at a time. It's infuriating. It just happened right now while I was typing "infuriating". It's happened since I installed the Facebook Video Chat Plug-In, but I uninstalled that and it keeps happening.
Probably an over active security or "cleaning" program that's kicking in every few minutes and messing with Firefox.
-
Premier pro play back screen goes black a freezes every 15 minute . This is my second mac pro with identical problems.
SOLVED!!!!!
SO I did some more digging around and read ATI cards seem to overheat easily. I knew the fan was working, but after closer inspection I realised there was ALOT of built up dust on the card and clogging the fan and airflow. Blew it out with alot of compressed air, stuck it back in the Mac and BAM...no black screens. I tested it by streaming 6 video sources...doing 2 screen captures at once as well as watching a HD movie in fullscreen. Did all this for 30 minutes and no crashes. I also downloaded an app to monitor the temps inside the computer and the expansion bay stays at 41 degrees. No clue what it was before but obviously it was hotter than that. So my problem is solved! Funny that 10.7.5 made the card work harder. I wonder if its off loading some CPU stuff to the GPU for processing more than 10.7.4 so its just working a bit harder and so it heats up faster.... -
My iPad mini freezes every 2 minutes and it takes another 2 minutes for it to respond again.
My iPad mini freezes every 2 minutes and it takes another 2 minutes for it to respond again, after it freezes the screen goes black and after 2 minutes the pass code screen comes up then the cycle begins again. My iPad is fully charged and I have closed all of my apps. Please help.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
AVI File Captured in Premiere Elements 8 Only Plays First Few Minutes
Hello folks,
I'm totally new to this. My problem: I've recently installed Premiere Elements 8 and used it to capture some mini DV video tapes (via firewire), without any significant problems (other than a few freezes). Now I've tried to capture some VHSC tapes via my TV card (Avermedia H727). The capture process went well (except that the preview screen was just a fuzzy mess!) but I had to plug the audio inputs into my sound card (onboard) rather than the TV card.
The caputred files are about 6 + Gb for a 30 minute tape but when playing the captured video back in PrE8 only the first few minutes is available (the length of playback seems to vary unpredictably (1 tape allowed 3 minutes of playback, another a bit less). The full avi files can be played back in Roxio or Windows Media Player etc but not PrE8.
Interestingly, videos captured from VHSC via the same TV card in Roxio 2010 Pro will play back correctly and fully in PrE8. I had to switch audio inputs to the TV card (rather than the soundcard) for the audio to be captured with Roxio.
My son has tried to help me with this (having some experience on PrE2) but he's also drawn a blank with this.
I'd be very grateful for any help that you might be able to give as I've not found anything in FAQ although it's not easy to succintly define my search for this problem.
Many thanks
Computer spec:
OS Windows 7 Pro 64 bit
CPU Intel i7 2.8GHz
RAM 4Gb DDR3
MB Asus P7P55D Deluxe
HDD 2x Sata II Western Digital 1.5Tb (each)
Graphics ATI Radeon HD 4300/4500 series
All updates for Windows 7 and PrE8 installedThanks John:
My PC has 2 HDDs and both are of the “green” variety. Both are partitioned (2 partitions on each HDD) with operating systems on the first partition (Windows 7 Pro 64 bit on one and Windows XP Pro -32 bit on the other, the operating systems are on different physical drives).
The tips relating to PrPro are hard to follow as they are quite technical and I’m not even sure which ones also relate to PrE8. It would take me an age to try to wade through this lot.
My point is that my current setup (for all its imperfections) will capture video (via the TV card) using PrE8 as the capture software. The setup must be adequate for this task as the complete avi file is played back correctly on Roxio and Windows Media Player but PrE8 fails to recognise any video after the first 3 minutes (approx).
If I capture to PrE8 using a firewire connection from my mini DV video camera then the capture proceeds normally (apart from odd freezes) and the captured video is all playable in PrE8.
When capturing using the mini DV camera, I select "DV camcorder" in the “Get Media” menu. However, this only supports Firewire or USB sources. When capturing from the VHSC tapes via the TV card I have to select “Webcam or WDM Device” as the media source (I’m not convinced that this is the most suitable capture mode but it’s the only one I can find that doesn’t look for either a firewire or USB device.
It seems as though PrE8 must be putting some code onto the captured video that prevents more of it from playing back because avi files recorded on Roxio will playback fully. I've tried to copy the PrE8 avi files into a different folder (devoid of any PrE8 project files) and then renaming the file before importing into PrE8 but still only the first few minutes will play. My thinking here was that perhaps one of the other associated project files that PrE8 creates might be the source of the corrupt info.
Many thanks for your interest and taking the trouble to respond. -
Premiere Elements 4.0 shuts down 15 minutes into my photo slideshow
I have created a photo slideshow in Premiere Elements 4.0. I'm using a Gateway Laptop - 2.00 GB, 32-Bit operating system. I checked available space on my C-hard drive and it shows: 43.6 GB of available space.
At approximately 15 minutes and 44 seconds, the end of one of my songs starts to skip, and an error message pops up that says: Microsoft Windows: Adobe Premiere Elements has stopped working - a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
I checked the song where the issue occured. It plays fine in other applications. I checked the format of the photos - all are Jpeg. I even deleted all files from that 15 min 44 sec point in my project and it still hits something it doesn't like and shuts down with the error message. I defragged and performed a disc cleanup. I re-started the computer and tried it again - same issue.
So I started over. I checked it every time I added something new. Photos worked; transitions worked, the theme worked..... and then I got to music. I added 3 tracks and at 15 min 44 sec, my issue started again. I thought that maybe I had run out of hard drive space (I've read several threads on here that suggest a laptop is not ideal for PE 4 - a CPU works best). But if that were true, shouldn't my project have worked when I deleted the songs from the project? I've tried everything and am a loss. I've contacted Tech Support and am still waiting for an answer. Any tips would be greatly appreciated!When I have program closed due to DEP I have always had a warning message saying that DEP is closing the program... and then given the option to disable it for the program.
What format is your audio by the way... MP3 can sometimes make PE7 do funny things... best to convert to WAV. You could also try the Render and replace for your timeline (under Audio) this will do what it says, render your timeline and replace it with a WAV file. -
It's just random, about every five minutes everything just freezes. It's not my computer, just the browser. I get the (not responding) in the upper left corner of the browser. I have to keep waiting about a full minute for the browser to resume. This only started happening after I downloaded Firefox 7
Did you give it a try to be sure that that isn't at least part of the problem?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
MICROSOFT FOR MAC FREEZING EVERY FEW MINUTES!
Does anyone know why whenever I'm working on Word or Excel on my Macs, that every few minutes the application freezes, indicating that I have to go & kill 5-10 minutes before I can continue with my work?
It's very frustrating :-(
I'd be grateful for any help / advice.
Thanks.
GarethTry repairing your drive for starters.
For another, killing can leave open files corrupt.
iMac (Intel)
You may want to look into more thorough steps to troubleshoot, include more details, check Mactopia or Microsoft community forum for Office.
Office 2011
Office 2008
Latest 2011 version on Amazon
http://www.amazon.com/Office-Mac-Home-Student-2011/dp/B003YCOJA8/ -
hey guys,
im a devoted user of mozilla but lately whenever i open my facebook (or other sites with lots of adds) it freezes for like a minute, every few minutes.
I didn't have this problem when I used explorer nor when doing it on other computers.
so i bet the problem is with my computer but I can't figure out what.. :(
please help me! I hate all other browsers!
p.s. u guys rock :)Are you playing Frontierville or Cityville or somesuch? Zynga games are HUGE resource hogs and if you try to pair them with Pandora or YouTube, things can go down really fast. You can also mitigate a little with an adblocker like [https://addons.mozilla.org/en-US/firefox/addon/1865/ adblock plus].
From reports of this that I've been hearing about, Flash 10.2 (which was a recent update) has been particularly bad with Zynga games. You can try changing your display settings in Flash (right click and select settings and then the first tab) but I would just suggest using just one game at a time. Adobe may be releasing a version of Flash that's better soon, so this may clear up if you update Flash, also. -
Adobe Premiere Elements 10 Video Freezes After One Frame
Hi, so my Adobe product worked PERFECT for about a year now, then all of a sudden it just broke, When I put a file into it, it shows the First Frame and Freezes, the Audio plays as if the Video was showing, but the Video is just frozen. I don't know how to fix it, I've uninstalled and re-installed it, but nothing is helping.
Gameman625
What computer operating system is your Premiere Elements 10 running on, and what video card/graphics card
does your computer use? NVIDIA GeForce?
If so, please read the Announcement at the top of this forum regarding the Premiere Elements 10/NVIDIA issue
which forces the Premiere Elements 10 user to roll back the driver version to about May 2013 in order to get
Premiere Elements 10 to function properly. For your convenience, the following is a copy/paste of that
Announcement which describes the problem, gives how to information, and all the necessary details.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you
are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of
troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained
workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce
video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card
driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as
March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any
corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the
driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Once we have the video card/graphics card driver matter ruled in or out, we can decide what next if indicated.
More questions will follow including
a. Do you have the latest version of QuickTime installed on your computer along with Premiere Elements 10?
b. Are you running the program from a User Account with Administrative Privileges?
c. Does the problem exist with or without the antivirus and firewall(s) disabled?
Looking forward to your follow up.
Thank you.
ATR -
I just finished making a video that runs to about the 13 minute mark. After that I don't have anything on the timeline. Despite this, the duration I see when I try to export is about 25 minutes. I then watched the video to confirm that I had an extra 12-13 minutes or so of blank, black, empty space added to the end of the video. I made doubly sure that there was no tiny file a chopped off on accident or anything, there's just nothing there. This has been a recurring problem, having occurred with a 7-ish minute video being expanded to 15.
born
What computer operating system is your Premiere Elements 12 running on? Be sure to update 12 to 12.1 via a project's Help Menu/Update. Background information. For now I will assume Windows 7, 8, or 8.1 64 bit.
Now to the core of the matter and a quick way to find and correct the problem which is related to fragment beyond what you consider to be the end of your Timeline content.
1. Open the project to the Expert workspace. Expand the Timeline content maximally by taking the Zoom Out-Zoom In Slider above the Timeline all the way to the right.
2. Hit the computer keyboard End Key. That should take the Timeline Indicator to the spot where the fragment(s) is (are)..
These fragments typically present as thin vertical black lines scattered among the track contents. Could even be a file that you pushed out of the way when
you were editing and forgot you left it there. Search all tracks.
3. After you find and delete it or them, then use the End Key again to make sure that this time Timeline Indicator stops at the end of your intended Timeline content when you press the computer keyboard End key.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
MacBook Pro freezes every 15 minutes after Mavericks upgrade
After upgrading to OS X 10.9.3 my computer freezes every 15 or so minutes in the middle of working. The keyboard and touch pad stop working and the mouse curser disappears. I'm using Ableton audio software and the audio will continue playing and looping normally but I loose any control to stop the audio or the program and I can not switch windows or even control volume. The only way to stop it is to hold down the power button and reboot. When restarting I tried pressing the command option +P +R through 3 whole sequences and still once I begin working again it freezes again. This has never happened in the 5 or so years of owning this computer and everything worked great while using lion. Only after installing the new upgrade of OSX did it start to do this. Any help would be appreciated. I live far away from any Mac store or Genius Bar.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent of each. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Macbook pro ( 13" mid 2009 ) keeps freezing every few minutes since downloading mavericks
Ever since downloading osx Mavericks , my mac book keeps on crashing every few minutes. Doesn't matter what application I am using, system hangs every few minutes. I have been looking at Activity monitor closely. Following programs end up using a lot of CPU and hang a lot:
SystemUIServer ( not responding -- several times )
Google Chrome ( not responding -- several times )
Google Chrome Helper ( not responding -- several times )
PepperFlashPlayer ( not responding -- several times )
Windows Server ( not crashing -- but using a lot of CPU resources - remains at top 5 CPU usage tasks. )
Looking at Console app .. following programs cause a lot of crashes: ( Console itself was not responding several times I was looking at it )
systemstatsd
GoogleChromeHelper
I also ran EtreCheck program .. here is the output:
Hardware Information:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
ChmodBPF - Path: /Library/StartupItems/ChmodBPF
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 12:48:1
Disk Information:
FUJITSU MJA2160BH FFS G1 disk0 : (160.04 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 159.18 GB (116.26 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-868
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
[failed] com.apple.systemstatsd.plist
Problem System Launch Agents:
Launch Daemons:
[loaded] com.anchorfree.ajaxserver.plist
[loaded] com.fitbit.galileod.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[failed] com.apple.CSConfigDotMacCert-sukhi_rs@me.com-SharedServices.Agent.plist
User Login Items:
iTunesHelper
iTunesHelper
Google Drive
3rd Party Preference Panes:
None
Internet Plug-ins:
AdobePDFViewer.plugin
Default Browser.plugin
DirectorShockwave.plugin
DivXBrowserPlugin.plugin
EPPEX Plugin.plugin
Flip4Mac WMV Plugin.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
PDF Browser Plugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
5% WindowServer
2% EtreCheck
1% Google Chrome
1% hidd
1% Activity Monitor
0% fontd
0% sysmond
0% notifyd
0% ocspd
0% imagent
Top Processes by Memory:
123 MB softwareupdated
115 MB Google Chrome
106 MB com.apple.IconServicesAgent
82 MB mds_stores
61 MB Activity Monitor
49 MB mds
49 MB Finder
41 MB WindowServer
33 MB Dock
33 MB Google Chrome Helper
Virtual Memory Statistics:
4.87 GB Free RAM
1.50 GB Active RAM
673 MB Inactive RAM
738 MB Wired RAM
1.42 GB Page-ins
0 B Page-outs
Is there anything else you would like me to post?ChmodBPF - Path: /Library/StartupItems/ChmodBPF
StartupItems can slow your Mac down.
Go to HD > Library > StartuItems
Remove this: ChmodBPF
Restart your Mac.
If it's still slow, open System Preferences > Users & Groups > Login items
Remove Google Drive. (iTunes Helper should not be a problem)
Restart your Mac. -
Premiere Elements 11 Editor freezes on launch
Unable to launch Elements 11 on Mac OS X Mavericks. Software was initially purchased and installed over App Store, before upgrade to Mavericks and was working fine. I did not use Elements lately and just bought new MacBook Pro with Maverics installed. The old Mac was reset to factory default. On the new one I restored purchases from AppStore. Installation was fine, but I am unable to launch the software at all. Any chance to help please?
and system I'm running it on:
Will appreciate any help!skyhike
Recently the ID taliz had similar issues and posted them here.
http://forums.adobe.com/thread/1340212?tstart=0
This user later reported that the solution was found with the help of Adobe Customer Service.
http://forums.adobe.com/thread/1340212?tstart=0
But, when asked just what that fix involved, there was no follow up from taliz. If taliz is reading this thread, perhaps we could ask again for the Adobe Customer Service fix in this case.
If no one comes forward with help in this thread, it might be a good idea to contact Adobe Customer Service to find out if it will offer free troubleshooting service for your issue.
If interested, please click on the following link
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=downloading-installing -and-setting-up
and, when it opens, click on "I still need help." to bring up the Adobe Chat.
I have pre-selected the topic of "Downloading, installing, and setting up".
I am strictly an Elements Windows person otherwise I was give you some first hand troubleshooting on this.
Please update us on your progress.
Thank you.
ATR -
Program Monitor Freezing Every 10 Minutes (Fixed by Force-Quitting - Relaunch)
When editing in Premiere Pro, everything is fine and responsive for about 10 minutes, then, while previewing my timeline, my program monitor will freeze randomly causing me to stop, save my work, force quit Premiere then re-open to continue editing.
Anyone have a similar issue? I'm thinking it's GPU related, but I've tried switching hardware acceleration off and the issue persists. Very frustrating.
Running a timeline with a mixture of footage - GoPro H264, FS700 MTS, Canon H264 and some ProRes.
2009 Mac Pro with Yosemite and GeFore GTX 680 4GB, 24GB RAM.In addition, occasionally when playing the timeline, the video will continue not allowing me to stop. Audio and video will continue, I'll get the beach ball cursor and I'll have to force quit Premiere.
Maybe you are looking for
-
I've setup the build environment for the VSM, but I can't get the VSM.ear to deploy in OC4J. Here is what I see when I build: Buildfile: build.xml init: copy: compile: [unjar] Expanding: E:\oc4j\lib\oraclexsql.jar into E:\vsm-i18n\classes [unjar] Exp
-
IPhoto Slideshow to iDVD - Audio problem
I created a slideshow in iPhoto and added music from iTunes. The slidewhow is about 40 minutes long and I set the length of the slideshow to match the music (about 10 songs). I shred the show from iPhoto to iDVD using the Share option. When I preview
-
Dear Experts, We are in the process of implementing ChaRM on our Solution Manager EHP1 system. We have configured ChaRM for our ECC landscape which is a 4 system landscape u2013 development, integration, quality and production. Integration server is
-
Mass ISU extraction into multiple BW systems
Hi, Currently we are exploring the option of extracting ISU mass data 0FC_BP_ITEMS, 0UC_SALES_SIMU_01, 0UC_SALES_STATS_02 etc. The current situation is as follows: There is a BW 3.5 system which extracts the ISU data via extractor cvia Mass jobs. We
-
Hello all. It's is once again time for some benchmarks with the new release. I will also include the previous X79 4930K clocked at 4.4GHz and Dual Xeon 10 Core as reference to these. I will add them as I get them done. Please let me know if you have