Premiere Elements 7 Entry point error
Hello Team,
In trying to start (Adobe Premier Elements 7) I keep getting the following error message;
"The Procedure Entry Point FileInfoinitializerFileinfoLibrary with BIB could not be located in dynamic Link Library"
Can anyone help? I recently had this program on my C Drive and recently unistalled it and move to my external drive for
space purposes. Once I moved it to my External drive, it began to give this message.
PLease help!!!
I agree with John on this. You can use your external for your media, and/or your Projects and Scratch Disks, but you want the program on your C:\.
Note: if you do use your external for your media files, and/or your Project files, you WILL want to set the drive letter to a constant in the OS of your computer, and to the same drive letter in any computer, where you might wish to "transport" your external to.
Otherwise, when you plug in the external, you might get a different drive letter and then have to manually locate your assets for PE. That is a lot of unnecessary work. I transport my Projects between the laptop and the workstation, and each one has a permanent drive letter assignment, that matches in the OS of each computer.
Good luck,
Hunt
Similar Messages
-
Entry point error while installing SAP GUI 7.20 compilation 3
Hi Experts,
I couldn't install SAP GUI 7.20 compilation 3 in my PC, I used SAP GUI in my PC a year ago but later I formatted my disk. Now when I click on SAPGUISETP it is throwing the following error
The Procedure entry point ?FeiDbgException@@YAXVCWin32Exception@@@Z could not be located in teh
dynamic link library NwSapFeiLg.dll
Can anyone please advise?
NB P.s: Initially it mentioned the dll files NWSAPFEIUT.dll & NwSapFeiLg.dll were missing just now I copied them to System & System32 folders. But even though it is showing this entry point error. Also i have done a clean boot and tried installing it but in vain.Hi
Please can you check the version of nwsapfeilg.dll in C:\Program Files\SAP\SapSetup\setup
The issue was caused by a version conflict. nwsapfeilg.dll.
Complete Installation SAP GUI 720 + Frontend
http://wiki.sdn.sap.com/wiki/x/CIENDw
Please check if this solves the issue.
Regards,
Naveen. -
Illustrator CS 6. All other application work as always did. Illustrator, however, displays an entry point error that wasn't solved after de-installing and re-installing the whole suite and cleaning the registry using adobe's application for that purpose. What happened is that my disk crashed and all applications had to be re-installed. Illustrator, however, displays this message and quits.
This is my system: Dell 8700, Windows 8.1, plenty of memory.
IF any one knows, please, help.Metaphysically speaking, you are right. Technically, a browser and Illustrator CS6, are two complex beasts that don't breed together and don't even try to cross pollinate each other if only to multiply their complexity factor, which I can only imagine, since they work independently.
As far as my system, this is a plain one, although I don't take it as totally innocent.
Thanks, anyway, for elevating a simple bug to a dignified philosophical consideration. -
Help uninstalling Adobe Premiere Elements 1.0 Error 1402.???
have my movie done ready to burn dvd
have had premiere elements 1.0 for 4 years
on my dell E1705 windows xp media edition 2005
computer has recently had some problem... freezes up
that was triggered in the DVD burning process
so i uninstalled and then reinstalled premiere 1.0 from the original discs
and when i went to open the program would get
a message that the registration is invalid and to uninstall the program
so when i went to uninstall the program it runs through the process
and when it gets to the part where it starts to remove registry values
i get a message window pop up that says:
Error 1402. Could not open key:
HKEY_LOCAL_MACHINE\...\DefaultPreset.
Verify you have sufficient access to that key or contact your support personnel...
Adobe doesnt support this software anymore
as i was told by their tech people
so i downloaded a free trial version of adobe premiere elements 8.0
and it crashes when i try to open it
ive been told by adobe tech that this is because
i need to uninstall APE 1.0
duh!!!
can you say catch 22
any body got a clue ?
thank you for taking the time to read this
310 869-2454
blessings and light
daeOne thing that can be done to clean Registry values is to run a Registry cleaner, like CCleaner. I would strongly suggest that you first manually create a System Restore Point, and then take advantage of CCleaner's offer to create a Registry backup, just in case. Run it several times to clean out all vestiges of PrE 1.0.
Also, getting back to the problems with PrE 1.0 and burning, please list the full specs. on your system. It is likely that what caused the burns to fail in the earlier version will still be there, and cause problems with PrE 8 too. Pay special attention to your I/O sub-system, i.e. your HDD's, their size, speed, amount of defragmented free space, controller type and how they are allocated.
Good luck,
Hunt
PS - are you running as Administrator? You should be.
Also, when you go to install, make sure that all AV, pop-up blocking and spysweeping software is turned OFF, along with all Windows firewalls, etc. -
Premiere Elements slide show error mesage
After preparing a slide show I went to "Share" and checked "Burn Video DVD/Blue ray. When Premiere Elements loaded and went to download my project file I received an error message as follows "This type of fie is not supported, or the codec is not installed".
I cannot create the slide show on a dvd.rickyrun
I had been working on the Premiere Elements 13 Windows tryout, trying to cover as much as possible. The tryout has expired. I should have the purchased version by the end of the week.
Elements Organizer 13 is a "new breed" of Elements Organizer along with it "Slideshow".
You say that you have created your slideshow (presumed with one of its 5 themes) and saved it as an Elements Organizer 13 Slides Show Project.
From that point on, this is my take on this which I will confirm again later in the week when I have the purchased version...
a. The Slide Show Project is a creation of the Elements Organizer 13 and remains in the catalog, available for re-edit (limited).
b. The only way out of the Elements Organizer 13 for this created slideshow is Export to yield an AVCHD.mp4 file either 720p30 or 1080p30 which
is saved to the computer hard drive.
c. It is those AVCHD.mp4 files that can be imported into a Premiere Elements project with Premiere Elements' Add Media/Files and Folders/Project Assets.
d. I do not recall there being a viable opportunity to use the Slide Show Project thumbnail in the Elements Organizer 13 workspace for a Share/Burn Video DVD or Blu-ray.
Elements Organizer Help | Create slideshows
More later.
ATR -
PREMIERE ELEMENTS VIDEO CAPTURE ERROR
I get this error when I am trying to capture video from my dv camera.
Premiere Elements has encountered an error.
[..\..\Src\TImecode.cpp-1014]
It seems to know I have a camera plugged in, but has a yellow yield sign with an exclamation point on the camera when the capture window comes up.CKENN19
It has been a several days since we visited this thread. Got detoured and then lost track of the thread in the fast moving thread traffic here.
From all that has been written in this thread and in spite the different numbers of computers involved, I am wondering if computer optimization may be the order of the day rather than focusing on making the DV data capture firewire work in Premiere Elements 12 on one of your computers, specifically Windows 7 64 bit.
Have you focused on one of your computers and optimized - maybe a free ccleaner run through, clearing away pile ups of preview files, conformed audio files, conformed video files? Checking out where the Scratch Disks are directed and how much free space was there. (The save location for Captured Video and Captured Audio is included in the Scratch Disks listings (See Edit Menu/Preferences/Scratch Disks.)
Not sure if I asked already, so I will ask anyway...can you do your DV data capture firewire in Movie Maker 2012 (same firewire cable)?
Did you ever get your Mom's computer to recognize your miniDV camcorder?
You have been working with Premiere Elements 12. Have you been working with the 12.1 Update (See opened project's Help Menu/Update.)
Moving to Premiere Elements 13 is not going to help on this one since DV and HDV data capture firewire have been removed from Premiere Elements 13. A workaround is offered, but....
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
For troubleshooting purposes only, you could download and install the free 30 day tryout of Premiere Elements 11 from the following web site and determine how your DV data capture firewire works in that
Photoshop Elements 11 Direct Download Links: Free Trials, Premiere | ProDesignTools
You cannot buy that download, but you can try it.
Just some thoughts if the issues are not yet resolved.
ATR -
NIPALU.dll entry point error message when launching application
A previously working application (written in VB6.0, using Measurement Studio 6 and NI-IMAQ1394) now has a fatal error message when starting:
"The procedure entry point _pkgModulePackageEventLog@20 could not be located in the dynamic link library NIPALU.dll".
This fatal error is only observed on some of our customers' systems, others work fine after the upgrade. WE NEED URGENT HELP!
Attachments:
Error Message Screen Shot.png 8 KBMSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted.
Hello,
It's just a guess: Power Pivot uses the MSOLAP = "Microsoft OleDB Provider for OLAP" and maybe that Provider is damaged on the machine. You may try to reinstall the Provider, you can get the installer named "SQL_AS_OLEDB.msi" from
Microsoft® SQL Server® 2012 SP2 Feature Pack =>
ENU\x86\SQL_AS_OLEDB.msi (for 32 bit)
Olaf Helper
[ Blog] [ Xing] [ MVP] -
I have Photoshop Elements 11 installed but Premiere Elements will not install due to the problem installing shared technologies. I would appreciate any suggestions as to how to fix the issue. I tried the installation several times.
205EdMLewis
On what computer operating system is your Premiere Elements 11 running on? For now I will assume Windows 7, 8, or 8.1 64 bit. Are you installing the program from
an installation disc or from installation files?
The Shared Technologies error is an old story that afflicts several versions of Premiere Elements on several different computer operating systems. My encounters with this error
have been using installation disc for the program involved.
There are numerous home remedies. The one that has been working for me lately and consistently has been the disabling of the OOBE Folder which is found
Local Disk C
Program Files (x86)
Common Files
Adobe
and in the Adobe Folder is the OOBE which you disable by changing the folder name from OOBE to OLDOOBE.
Please let us know if that worked for you.
Do not give up.
ATR -
After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
The same thing occurs when attempting to open the archive files.
New projects, and unmoved projects behave properly.
Moved projects receive this error.
I'm running Windows 7 Home Premium SP1 on a solid state drive (SSD) (c:/), where premiere elements is installed
My documents, including the project I need to work with are on my "storage" drive (HDD). it is (f:/)txnoda
Archiving Aspects of this.....
First let clear the matter of the "archiving" as a life saver.... We do not appear to be on the same wave length.
a. I am talking about File Menu/Project Archiver with its Archive project and Copy project options. This feature is a safety net to save you when you
inadvertently disconnect source media from the project file. With the Archive option (Trimmed Folder result), you get saved to the computer hard drive (safe keeping) a copy of the project file plus copies of the media that were taken to the Timeline. With the Copy option (Copied Folder result), you get copy of the project files plus copies of much more.
b. Instead, you appear to be talking about "archiving" in the context of AutoSaves. AutoSaves are saved snapshots of the project at various phases of the edit. They suffer from the same shortcomings of the original project that has been disconnected from its source media.
When you import media into a project, all you get are copies of the originals in the project. But, those copies need to trace back to originals at the locations where they were when first imported into the project. Moving, renaming, deleting files/folders that went into the project after the project save close leads to some very time consuming messy situations.
What to do....
If you can, put everything back the way it was. If not.....
Let me emphasis some factors..
You wrote
After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
Here you mention specifically "client's video". Later you detail with .mod files converted to .avi. What kind of .avi? If you have converted to AVCHD.avi or H.264.avi, they have been found not to be compatible with Premiere Elements. You should not be able to import them into any new or old project.
From what you described, I am envisioning
"Video" Folder
which contains 2 folders named
"Timestamped Folder" with .avi files
and
"DVD" Folder with the project file (project.prel)
The project file has many files generated automatically in the course of it workflow. Where do you have them going?
(See Premiere Elements 10 Edit Menu/Preferences/Scratch Discs). If you have the Scratch Discs directed
"Same As Project", then we would expect all those files to be going to the DVD Folder in the above scenario.
If we could open the project and get greeted with some "Where is the file.....?" messages, that might give us some hope.
But that is not the case.
Consequently from what you have said, I am suggesting that the path of least resistance is try to recreate the "before".
Please review and consider.
ATR
Add On...Not sure if it will assist in the matter, but the following is the link to Adobe's document related to troubleshooting
damaged projects.
Troubleshoot a damaged project file | Adobe Premiere Elements -
Adobe premiere elements 10 install error on mac
I have tried to install the Premiere elements 10 on mac and fails every time with the following error
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s), 7 warning(s)
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Smartsound3: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 10: Install failed
ERROR: DW050: - Smartsound1: Install failed
ERROR: DW050: - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Elements 10_LangPacken_US: Install failed
ERROR: DW050: - Smartsound2: Install failed
I have downloaded and installed the Adobe support Advisor and it reported the following ,.
Trying to select the link in the report above takes me to the following ..
http://helpx.adobe.com/creative-suite/kb/installation-error-dw050-dw020-cs5.html
Which reports an error in a Windows environment ? and advices we ignore this error. However the installation does not go any further.. it quits and does not ask for the other disks to be installed.
Its been several times I have already tried to install and in between every install a restart of my mac pro
Any help would be appreciated.
Thanks
Murali VallathYou will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum -
I downloaded iTunes onto my laptop and was getting an Apple Application Support error so I downloaded that and now I'm getting a Procedure Entry Point and Error 7 (Windows Error 127) messages. I have no clue how to go about fixing whatever the problem is...can anyone help me?
iTunes.exe - Entry Point Not Found
The procedure entry point
AVCFAssetCreatWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Entry Point Error when starting WL
Hello,
I am runnning WL 5.1 on Windowa NT. When I start WL as a NT service a got this error:
WLService - Entry Point Not Found
The procedure entry point ResolveClass could not be located in the dynamic link library javai.dll
Despite this error, I got to start WL. But I would to know if this behavior affect my WL, if so how ?
Thanks in advance.
Francisco ManzoTshifhiwa,
Back again? Nothing learned?
No jdev version?
You should n^know by now that you have to give at least some basic information.
A description of what you tried to do outside the listing would help too.
Timo -
Premiere Elements 8.0 Error!!- Help!
When I attempt to open Adobe Premiere Elements 8.0 I just get a blank screen. When I open a specific project from my saved files, an error message appears stating, "A serious error has occured and Elements needs to shut down". I have not changed anything on my computer since or before this happened. It is completely out of the blue that this is happening. Any ideas or solutions? Any help is much appreciated!
Salvatij16
After you work through the suggestions of kglad, please look at
a. Flushing the preferences...
Local Disc C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
8.0 Folder
and in the 8.0 Folder is the Adobe Premiere Elements Prefs Folder that you delete. If that deletion does not work, then delete the whole 8.0 Folder in which it exists.
Make sure that you are working with Folder Options Show Hidden Files, Folders, and Drives active so that you can see the complete path.
Also, check your Scratch Disk to assure that they are directed to location with enough free space to accept them. Look for pile ups of preview files as well as conformed video and audio files.
And, it goes without saying, make sure that you are running with Background Rendering and AutoAnalzyer Options turned Off, if and when you can back into a project. (More on that later after you have checked out the prior suggestions.)
Thanks.
ATR -
How do you fix entry point error sqlite3_wal_checkpoint
HI All,
I just downloaded the "lastest" PUSH (iOS (iPAD/iPhone), Quicktime, iTunes upgrades for Windows 7 (x64) from Apple, and upon reboot (required) I was greeted with the following error msg.:
"The procedure entry point SQLite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."
How do you FIX this????
Thanks in advance for your help in resolving this matter.
Regards JeffHI B Noir,
No that did not help. I did copy the SQLite3.dll to the: Program Files(x86)/common files/Apple/Mobile Device Support folder and that got rid of that error. It appears that this is an ongoing issue with iTunes on Windows machines. I'm starting to remember that I had to do this for the last update, fouond the fix in another forum dated in 2010.
2 other issues also occur:
1. Can't backup to the computer, only to the icloud. When I change it in itunes it reverts back to the icloud, and will not backup to the computer.
2. The "category list" in the radio on itunes refreshes forever, and no station appear under any category.
Thanks for trying.
Regards Jeff -
Can't install premiere elements shared technologies error
can't install premiere elements because of shared technologies error
Hi,
Please restart your system and try installing again.
If the error persists, please share your OS details and please share the logs from the following locations:
%temp%\PREInstall.log, PRE11.log,
Elemets11OrganizerInstall.log,
Organizer.log,
PDApp.log,
amt.log
oobelib.log
C:\Program Files\Common Files\Adobe\Installers\<*PRE11*>.log.gz
thanks.
~ Shefali
Maybe you are looking for
-
Keystrokes will not function in adobe acrobat reader
A company I am affiliating with is requiring me to fill out PDF forms online. I am able to open the forms but when I attempt to type in a field my computer dings at me. No error messages. Typing is simply not excepted. Why?
-
I have developed several web sites using xampp within dreamweaver. One of my new web site which has frames (as all of them do), my php scripts are not working properly. I am asked if I want to save or open the php script, to open it will put me in dr
-
Hi, I'm triying to add a Portlet producer form SAP, an when I try to connect I get this Exception, oracle.portlet.client.container.PortletException: java.lang.RuntimeException: Error converting the following SOAP element to JAXB package 'oracle.portl
-
Deleting and updating database table
hi all, i have to update the database table based on my internal table(both having same structure). my database has 2 records having a key field 1 and 2 respectively.(2 records) and my internal table has records with key fields 3, 4 and 5 respectivel
-
Can I delete older app. versions after installing newer versions?
I recently downloaded and installed the newer versions of pages, numbers, and keynote. Can I safely delete the older versions I had when I purchased iwork 09? I'm trying to remove unneeded files. Thanks!