Premiere Elements 8 - Audio Unsyncronized on Share/Export

Some reason when I export my video, the first 20 seconds are perfectly fine, but then there's one part where the audio for the remainder of my video becomes unsyncronized. This doesn't make any sense though, because the audio and video are linked together, so I couldn't have slightly dragged it to unsync it with the video. Even worse, if I play the video in Premiere, the audio is perfectly synced together. This only seems to happen for the audio that's linked to my video, and not the narration.
I've tried exporting to different formats, but every format has the same result; desynced audio. Any help is appreciated.
Project settings:
http://i21.photobucket.com/albums/b272/Xebarsis/Specs.jpg

Thank you for the replies; here's the info on the AVI files I use that are being unsyncronized by the audio transitions:
http://i21.photobucket.com/albums/b272/Xebarsis/Codec.jpg
It's video game footage that came from a Nintendo emulator called FCEUX, I use the X-Vid codec because it's the only codec I have that doesn't cause stuttering during recording.
I've shared this same video before, and the audio transitions never caused the audio to become unsynced. Only since I have nearly finished it has the sharing started to cause problems. I tried changing the audio transition from "Constant Gain" to "Constant Power," but it's the same problem. I also tried deleting and putting them back in just to see if it magically fixed it, but no luck. Potentially I could simulate a smooth audio transition by laying the audio tracks over each other on two separate tracks while fading one in and fading out the other, but I use this transition so many times in my video that it would take a super long time to make that happen.

Similar Messages

Premiere Elements 8: Audio sync problem when exporting to Quicktime H.264

Program plays back fine on the timeline also when saved as a mpeg file. QT file audio sync is off. Using QT player to play back. Any thoughts?

Check you have the very latest version of QuickTime (7.7.1 at time of writing): QuickTime 7.7.1 for Windows
Cheers,
Neale
Insanity is hereditary, you get it from your children

Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files

I dowlnloaded Premiere Elements 4, and when I import mp4 files, the video plays but the audio will not. I've also tried to import .mov files, and an error message pops up that says "Codec missing or unavailable." I downloaded the latest version of Quicktime, but that didn't change anything. The files will play back on the video camera, but I"m having trouble with them on my computer. The audio on the mp4 files plays in Quicktime, but not the video, and vice versa when I import them into Elements. Any suggestions?

Does Quicktime Pro also edit .mov files on a PC?
Date: Wed, 27 Nov 2013 07:53:14 -0800
From: [email protected]
To: [email protected]
Subject: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    Re: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    created by Steve Grisetti in Premiere Elements - View the full discussion
Premiere Elements 4 pretty much works with tape-based digital video. That would be video from a miniDV or HDV tape-based camcorder. It doesn't handle other formats very well.
If you plan to edit MP4s, you definitely want to upgrade to a more current version of the program. If you can't install a current version of the program, you may need to address issues on your computer (such as an outdated operating system or underpowered hardware configuration).
Short of that, you could buy Quicktime Pro from Apple for $29. It will edit MP4s, even on a PC platform.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5879880#5879880
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5879880#5879880
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5879880#5879880. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Premiere Elements 11 Audio & Video are not in sync

I am using Premiere Elements 11 for editing sermons, and recently I have noticed that in all of the finalized videos the audio and video are out of sync about half-way through the sermon. I know it is not the DVDs since they have no issues when running in a DVD player or with Windows Media Player. The DVD's that are formated after service break the sermon into three files. The files, after importing them to Premiere, read "VTS_01_1. VOB, VTS_01_2. VOB, VTS_01_3.VOB" The first file runs fine with no delay, but the last two consistently are off. When I first installed this program I had no trouble with this so I am wondering did I change something or is there a better way to do this.

terriCCC
Is your Premiere Elements 11 on Windows 7 or 8 64 bit?
How are you getting those VOBs to the Expert workspace Timeline?
Are you placing your DVD in the DVD burner tray, opening Premiere Elements 11 to use its Add Media/"DVD Camera or Computer Drive"/Video Importer with "Add To Timeline" and the ripped VOBs select in the Video Importer dialog? Or, other?
Please clarify what you are exporting your Timeline to for this playback that is out of sync...file saved to the computer hard drive or to DVD-VIDEO standard or widescreen format on DVD disc. Are you setting the correct project preset? If your DVD represents DVD-VIDEO standard is your project preset NTSC DV Standard; if your DVD represents DVD-VIDEO widescreen is your project preset NTSC DV Widescreen?
Each VOB cannot accept more than 0.99 GB. So, when more data are involved, another VOB is generated. Right now it looks like you have 3 x 0.99 GB on your Timeline. What total duration are you seeing? When you get to the burn dialog for one of these projects, what are you seeing in the burn dialog for Space Required and Bitrate.
When quality and out of sync audio occur with the ripping of the content into the video component VOBs, some have tried a seamless DVD.vob approach (combined VOBs in one file) using the computer Command Prompt and then importing the DVD.vob instead of the individual VOBs. I have written about this in a blog post.
http://www.atr935.blogspot.com/2013/09/pe-dvd-videoseamless-vob-ripping.html
I do not know if we are ready for this just yet.
Let us confirmed the details of what you are doing now as per the questions that I have asked.
Please do not hesitate to ask if you need clarification on anything that I have written.
Thank you.
ATR

Adobe Premiere Elements 4 won't render or export.

Hello!
I have recently found the HD options in Premiere Elements 4, but when I go to render or export, the render window pops up for a split second before closing. When I click export, it prompts me to save the file, but then it doesn't do anything.
The NTSC-DV-Standard 48kHz and Widescreen 48kHz works just fine, it's the HDV 1080i 30 and HDV 720p 30 that wont render or export. This is very irratating as I would like to have higher quality videos when my clips are higher quality as well.
Thank you in advance for any help!

xmau5
The installation of QuickTime on your computer with Premiere Elements 4 is a must.
Please go to the following link and install QuickTime (the version will be applicable to 32 as well as 64 bit system)
http://www.apple.com/quicktime/download/
This version should cover through Windows 8, 8.1 64 bit.
The other requirement is that you run the these programs as Run As Administrator or from a User Account with Administrative Priviledges.
Then I would suggest that you try the export
Share
Personal Computer
QuickTime
with the Preset = Cable Modem
and then change the settings under the Advanced Button/Video Tab
or
Repeat what you have been doing with File Menu/Export/Movie with your setting presumed to be for
QuickTime 1440 x 1080 HD anamorphic 16:9. H.264.mov.
Let us see if the QuickTime requirement takes care of your issue.
Looking forward to your results.
But the success or failure of the overall project is going to depend to a large extent on how you set up the project.
The project preset set at the beginning of each new project should match the properties of your source media. So, get a good handle on what those properties are.
ATR
Add On...
Are you starting out with HD footage like 1440 x 1080 HD anamorphic 16:9 or 1280 x 720 16:9 and going to an edit and export to the same. Or are you try to take SD footage to a HD export?

Premiere elements 13 will not publish + share. eLive doesn't work.

Made my first video after downloading PE13 late last night. Unfortunately, I cannot publish and share. I click publish + share>computer>avhd. From there I've tried multiple preset options. Upon clicking save, the computer works for several minutes and a green checkmark appears with the words, "save complete!" Your video has been successfully saved. Thing is, when I go to the folder I saved it to and try to view the project, windows media player opens a half window and plays the audio from the movie I just saved.
The other issue is that I cannot upload directly to facebook, or YouTube. I have no options for logging in. When I click through to the screen and select "Authorize" I get a screen that says, "Thank you for authorizing Adobe PE13 to upload to your FB account. Select complete authorization to continue uploading the vid to your fb acct. When I hit "authorize" it comes back with "Error your authentication details could not be verified. Kindly try again. What Am I missing? I am logged into facebook. I even have a screen open in another window.
Could these two probs be related? eLive doesn't work either.
I'm running windows 8.1

GPPNeil
Premiere Elements 13 on Windows 8.1 (assumed 64 bit).
First..
1. Have you updated from 13 to the 13.1 Update using an opened project's Help Menu/Update. If not, please do so.
2. Do the problems exist if you disable the antivirus and firewall(s)?
3. Are you running the program as Administrator? Do you have the latest version of QuickTime installed on your computer?
4. Have you refreshed the Online Services using Premiere Elements Editor Edit Menu/Preferences/Web Sharing?
5. Have you updated the Adobe Application Manager?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
6.Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
7. Lots more we could go through such as deleting the Adobe Premiere Elements Prefs file and, if necessary, the whole
13.0 Folder in which it exists.
But, I think that you have enough things going on here to warrant an uninstall, free ccleaner run through (regular cleaner and registry cleaner parts) and then reinstall with the antivirus and firewall(s) disabled.
CCleaner - PC Optimization and Cleaning - Free Download
If the problems persist after all that then we will adjust to additional troubleshooting maneuvers.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Premiere Elements 9 Won't Let Me Export Video. What's Wrong?

So I have been trying to edit a recent Let's Play video for my Youtube channel, but there is a huge problem. The program won't let me export my video. I tried to export it as a .mpg; but it will never finish rendering. I've tried other formats and the same thing happens. I tried making a new project file and the same thing happened. It will usually get to 1% or 47% and then the estimated time will start increasing and the video won't save any further. I've edited videos with these type of files before (.M2TS, .MP4, .WAV, & .PNG) and it has rendered just fine. Please help me because I have people who are asking for this video. My computer runs Windows 7 Professional and has 2GB of RAM.

You've got a couple of issues to be concerned with, Cwood.
First -- are you really running a Windows 7 Professional computer with 2 gig of RAM! If so, it's surprising you can even run Premiere Elements. I highly recommend you upgrade to 4 gigs of RAM at the minimum -- and, if your OS is Windows 7 64-bit, possibly 6 or 8 gigs. RAM is your computer's lungs. Without adequate RAM, your computer can barely breathe!
Also, make sure that you have adequate free space on your hard drive (I'd recommend at least 100 gigs) and that you have run Disk Cleanup and the Defragmenter so that Premiere Elements has adequate free space to use for temp and render files.
Second, editing video from recording software like Let's Play can have a number of inherent problems. What format is Let's Play recording your video as? If you open the video file in Media Info or G Spot, what frame rate, resolution and codec is displayed?
Finally, I would very much recommend AGAINST using an MPEG output for your YouTube output. MPEGs, like DV-AVIs, are interlaced videos, and they are really not going to look good at all when you post them online?
Have you tried using Premiere Elements 9's Share/Online/YouTube to output your video?

Premiere Elements 10 MAC OSX, can't export to AVI or WMV and Crashes everytime

I recently bought Adobe Premiere Elements 10 3 days ago, instead of FCPX because of pricing issues (Difference around 175€). This App, since i have installed it, keeps crashing every time, with simple actions like split a clip, adding a effects, using subtitles, etc. A video editing app that only exports to wmv or avi on pc version is shameful. I can't even use flip for mac to export to wmv... witch is one of the most used file extensions around the world as well as AVI. This information is not shared on the app store, and i found it later on forums and on adobe website. I am not happy at all and I wish to have my money back. Since i bought it on the Apple App Store, they told me to talk directly to adobe.
The order number is: MH3SJK7FDJ
Waiting for your response
Regards
Martim Durão

Martime,
If you have purchased Premiere Elements, within 30 days, then Adobe offers a full, money-back guarantee, and all you will have to do is contact Adobe with your S/N and invoice info, to return the program for a full refund. Just do not let the 30 days pass.
As for the Supported Export File Formats, see this Adobe KB Article. Note the "Windows Only" besides AVI and WMV.
Now, many Mac-users have had good luck with Flip4Mac, regarding WMV files. Not sure why that is not working for you. Most of those users are on PrPro, but I would not think that would make a real difference, but could be wrong there?
Good luck,
Hunt

Premiere Elements 8 - Audio Stops

Hey all,
I'm working on a video for my YouTube channel and when I try to play it in Premiere (in the timeline or in the preview window) the audio cuts off around 1:04. It's an MOD file that I recorded with a Canon FS200 camcorder. My computer is a Dell Inspiron 531S running Windows Vista Home Premium Service Pack 2. I've replayed the same file on the camera itself and in Windows Media Player and I heard the audio all the way through. Any help would be greatly appreciated.
Thanks in advance!
Alex

How fast is your processor and how much RAM do you have? Have you freshly defragmented your hard drive?
When you shot your video, did you ensure that it was shot in XP mode?
When you started your Premiere Elements project, did you select the project settings for a Hard Disk standard definition camcorder?

Premiere Elements 9 audio issue

Hi, i have an audio issue with Premiere Elements 9.
I just purchased a Dazzle DVC 100. I've captured Video/Audio through Pinnacle Studio no problems.
But when I try to capture in PE9 I only get Video. I have changed every setting i could find under the
audio preferences menus, tried every combination i could but still no audio. Am i missing something?
Thanks for any help forwarded!
These are the settings i tried.
edit - project settings - playback settings - I've clicked both Desktop Audio/External Device Audio
edit - preference - audio hardware - Default Device - Premiere Elements WDM Sound
                                                                           ASIO Settings - Input - Realtek Digital Input (selected)
                                                                                                  - Output - Speakers (Realtek High Definition Audio) (selected)
                                                                                                                - Realtek Digital Output (Realtek High Definition Audio) (selected)
Tried the Default Device: Asio4All v2 setting
This comes up with 2 options Realtek High Def Audio and Dazzle DVC100 Audio Device
I have selected both these still no audio.
I'm stumped.

Unfortunately the Dazzle is one of those low-end capture units that are pretty much made to work with the video editor that comes with them. Even converting the video won't make it more compatible with Premiere Elements.
As I explain in my books as well as in the FAQs to the right of this forum, the best devices for capturing video for editing your PC are called DV bridges. The best value is the ADS Pyro AV Link, available for about $100 online.
http://forums.adobe.com/thread/431853?tstart=0
The video it captures load right into Premiere Elements and edit beautifully!

Premiere Elements 7 Audio Help

I'm working on a video project in Premiere Elements 7. After starting to get the hang of it (this is my first time using the program), things were going fine. I was in the process of manually setting up the menu markers, when I came across a stretch of video that had no audio. This part was approximately an hour in and the entire video up until that point was perfectly fine. The soundless part lasts about 15 minutes and then the remaining 45 minutes have audio but it is badly out of sync with the video. I've tried restarting the project and re-uploading the video to the program again, but it didn't help. I know it isn't a problem with the video because I've worked with it before and just tested it in iTunes and Quicktime and it works perfectly fine with those programs.
Does anyone have any idea what the problem could be and how to fix it? Would the audio problems transport over to the DVD if I were to burn one with the video as is? Thanks.

Are you Importing MP3's from your iTunes, or something else? MP3's are notoriously bad for Video editing, as they cause lots of problems. I always convert all MP3's to PCM/WAV 48KHz 16-bit, and have zero issues. I use Adobe Audition, but the great, free audio-editing program, Audacity, will do this too, as will many other programs.
If you problem Audio is coming from the muxed MOV files, what are the specs. of the Audio?
Hope that that helps, good luck, and welcome to the forum,
Hunt
PS - as Steve mentions, when Importing any file with Audio, Conforming and PEK (Waveform Display) files will need to complete. There is a little blue progress bar at the lower-right of the GUI. Wait until it is done, before doing ANY editing.

Premiere Elements 3.0 Programm wird beim Export beendet

Das Exportieren von Film oder MPEG oder ... ist nicht möglich da das Programm sofort beendet wird.Video ca 6Min. lang.
Premiere Elements 3.0 seit 3 Wochen installiert unter WINDOWS XP, Pentium 4, 3 GHz, HDD 160 GB etc. An der Hardware kann es eher nicht liegen.
Wer kann mir helfen?
Gruß Helmut

Habe wie Helmut Probleme mit Adobe Premiere Upgrade 3.02 d.h. es ist mir 3 mal nicht gelungen ein Film ohne DVD Menu tot. ca.55 Min. zu kodieren( immer bei 50.49% Kodierung Programm sofort beendet), dann beim 4ten Mal lief es und ich konnte ein DVD brennen.
Da habe ich gedacht jetzt klappts. weit gefehlt, denn nach der Bearbeitung inkl. DVD Menu lief es nie mehr.Ich habe auch die Empfehlungen der englischen Seiten befolgt( virtueller Speicher vergrössern, Virus Programm deaktivieren,Bildschirmschoner deaktiv., Sonic und Roxiofiles von Typ CDRAL.DLL auf Desktop ziehen usw.)ohne Erfolg, Premiere steigt immer wieder aus sobald ich den Befehl DVD brennen eingebe.Ich plane jetzt eine Vergrösserung des RAM Speichers von 512 auf 2.5 Giga aber ich bin nicht sicher ob das Problem damit gelöst wird.Wer kennt Abhilfe?

Adobe premiere elements 10 audio sync bug (mpeg2)

Hi
Right im trying out diffrent video editing software and reviewing them. There is an annoying bug or flaw when it comes to importing mpeg2 files. The audio track becomes delayed about 1 sek after a while, its synced in the beginning and the get out of sync at the end of the clip. I tried the same mpeg2-files on other video editors including: Pinnacle studio, Vegas, Corel Studio, Cyberlink Powerdirector and the audio is perfectly synced all the way.
So, obviously its a problem/bug related to Adobe. I remember I had similar problems with Premiere pro and compressed videos, audio tracks dissapearing etc.
Im gonna try the trial for Premiere Pro to see if it has the same problem as elements.
Besides this, I kind of liked the interface and workflow in the program. So its bad that it cant handle a common compressed format such as mpeg2 that all other popular editors out there can.
Kind Regards,
Jonas

Well, with licensed modules, like CODEC's, and plug-ins, it is often just an "activation" issue. Rather than for the NLE company, whether CyberLink, Magix, Adobe, et al, to just give the fee to the licensing agent (say MPEG-LA) for every copy of the program, whether trial, or full-price, they limit the trial versions, and then with their full-paid version, the user will activate that module, and this normally happens transparently. When the module gets activated, the licensing organization gets notice, and then back-charges the NLE software company.
This sort of thing was carried to the extreme with the Pinnacle Studio programs, where "samples" of every conceivable module was included in the program. However, those were just previews, and could not be used, until the user contacted Pinnacle, and then bought an unlock code for each module (often sold in packages). The program cost around US $ 100, but to unlock all modules, it would cost about US $ 500 additional. As there was nothing but unlock keys, the user had to guard those well - no discs, or media. Also, Pinnacle did a fair job of keeping records of users' keys, though some did get lost over time. Also, keys did not always work version to version, so an upgrade could render key purchases useless.
With the DD 5.1 SS Minnetonka Audio SurCode plug-in for PrPro, things are slightly different. Adobe includes a limited version of that encoder plug-in - the user gets three trials of it. To activate the plug-in, beyond those three uses, the user must buy the key from Minnetonka, and it's now about US $ 300. Most of that cost goes to Dolby Labs, and in this case, Minnetonka just sort of is the "banker," sending the $ to Dolby, when they SELL that plug-in key.
Different companies handle "trials" differently. Some, like the Minnetonka SurCode, give limited, unencumbered uses. Some limit by time, and give unencumbered use, during that time. Some use a watermark, or similar, until the user buys it, and then the watermarks are uncoupled. Some just limit the features in the trial, and those limitations are lifted, when one buys. There are pluses and minuses to each scheme. However, each is designed to let a user try something, and no royalties are paid, until they buy it.
Good luck,
Hunt

Premiere Elements 7 - "Multiplexing has Failed" (on export to h.264 1920x1080i30)

New to the forum. I have the PSE7/PRE7 bundle I purchased and downloaded direct from Adobe a couple of weeks ago. I also have a Canon HF100 AVCHD Camcorder.
My problem is this. Whenever I attempt to render one of my camcorder clips (AVCHD .MTS files) that I've dropped in the timeline using the "h.264 1920x1080i 30" share option, it gets all the way through the rendering process and then with 5 seconds left, I get a "Multiplexing has failed" error and it fails to complete the rendering job. The clips are shot at 1920x1080 60i at 17MB/s. I import the clips and attempt the render in the 1920x1080i 30 (not 5.1) "preset".
I cannot for the life of me figure out the problem. I called tech support and the best they could suggest was to have me re-install PRE7...which I did...twice...and the problem persists.
I'm running 32-bit Vista Ultimate on a Dell D820 notebook with a 2.0Ghz Core 2 Duo Processor, 2GB RAM, a 320GB 7200RPM HDD, and a 512MB NVIDIA Quadro NVS 120 Video Card, so processing power shouldn't be the problem. In fact I can render in every other format I've tried without issue.
Other potentially relevant software installed (although I've uninstalled all of this in an attempt to see if they were causing problems, and the problem persists whether or not they're installed) include QuickTime 7, Nero 9, and Pixella ImageMixer 3 SE (the software that came with the HF100 which I don't use, but installed solely to provide the codec to view the .MTS files in WMP11 and in the PSE7 organizer).
Any suggestions as to what the problem could be?
Thanks in advance!
--Mav

Ozpeter, "PE7 - AVCHD user's first look" #13, 5 Oct 2008 2:29 am might point to a workaround - don't multiplex in PE7, use the 'tsMuxeR' free small 3rd party package to do that afterwards (and then you can burn an AVCHD DVD using imgBurn).

Premiere elements 8 - Audio stops midway through timeline playback

Hi Everyone... I am editing together a series of mp4 shots with a separate mp3 audio soundtrack. The audio from the vid shots is turned down or off and the music is on the soundtrack channel....
I am on an HP Notebook w/4 gb ram, windows-7 64bit, 320 gb hd, 2.64 ghz processor... I dont have many problems with the video, its slow occasionally, but generally has worked fine.
The audio was working fine for a while, then one time when i rendered down a rough version, i noticed the audio stopped mid way through the playback. Before that, it was working fine. So i went back into the editor and sure enough the audio was stopping mid way through there too. I also noticed that the sound from the video shots continued to work fine, only the music would cut off. since then, nothing i do restores the audio.
I've viewed the audio wave form, everything is there, it looks fine.
Any thoughts? And thank you so much for any assistance!
//DJS

Also note that the program must conform and create peak files for certain media files when you first add them to your project. (You can see the progress in the lower right corner of the interface.) If you interrupt this process and try to work with these files before they're completely conformed, they may only be partially conformed and you get only half the audio.
Try clearing the audio from your Project panel (from the right-click option) and then re-adding it to your project -- making sure to allow the program to completely conform the file before you start working with it.

Premiere Elements 8 - Audio Unsyncronized on Share/Export

Similar Messages

Maybe you are looking for