Premiere Elements 9.0 problem uploading Project

Premiere Elements 9.0 will not fully upload a Project. It uploads to 100% and then stalls. Just prior to this problem it gave me a lack of memory and proceed with caution notice. Solutions?

hodgson
Basically, what are you uploading your project to?
Your Premiere Elements question should be posted in the Adobe Premiere Elements Forum (video editing) rather than in the Adobe Photoshop Elements Forum (photo editing). A moderator should be along shortly to move your thread there.
In the meanwhile I will ask the following
1. On what computer operating system are you running Premiere Elements 9 and are you running Premiere Elements as the 9.0.1 Update?
2. When you talk about uploading a project, exactly where are you in the project....Share/Online/YouTube or some place else?
3. What are the properties of what you have on the Timeline? And, what have you set as the project preset based on the properties of those source media? What is the total duration of your Timeline content?
4. Please describe your computer resources: 32 or 64 bit system, installed and available RAM, free hard drive space?
The properties of your source is important since their format may be a factor in the low memory messages.
Looking forward to your follow up in the Adobe Premiere Elements Forum.
Thanks.
ATR

Similar Messages

In Premiere Elements 8, None of my projects will open. Says projects were created in Premiere Pro

In Premiere Elements 8, None of my projects will open. Says projects were created in Premiere Pro, when they were not. Cannot create new projects either. Basically, the program is completely bricked an unable to do anything once it gets past the welcome screen.
My projects are all saved as .prel
They were all working, when suddenly none of them would work any more. I can no longer use this program, and I really need to. Have already tried running the program as an administrator and creating a second admin account. Also tried going to the basic graphics driver.

GB-92
Thanks for the helpful additional information. Because of the nature of the description of your problem (references to Premiere Pro which you do not have et al), I would encourage you to go directly to the following which I suggested previously by the following question.
5. Have you gone the route of Uninstall/ccleaner run through - regular and registry components of the cleaner), reinstall?
1. Uninstall Premiere Elements 8 via the usual Control Panel/Installed Program area route.
2. Download and install the free ccleaner and run the computer through its regular cleaner and registry cleaner parts.
http://www.piriform.com/ccleaner
Open the program to see something like
Click on "Run Cleaner" with the "Cleaner Tab" selected in the left column of the dialog. Click OK to the pop up to initiate the automatic process.
After the regular cleaner portion is done, then click on "Registry" in the left column of the dialog. It should look something like
Click on "Scan for Issues"
when done
Click on "Fix selected issues"
when pop up appears
Click Yes to "backup changes to the registry"
when done
Click "Fix selected issues" in the pop up that now appears
when done
Click Close.
Please read all the details in the ccleaner link before starting. If you need clarification on anything written before you begin, please do not hesitate to ask.
I use this procedure routine for computer maintenance without issues (Windows XP 32 bit as well as Windows 7, 8, and 8.1 64 bit). It is a widesly used tool.
We will be watching for further developments.
3. Reinstall Premiere Elements 8 with antivirus and firewalls off. After installation of 8, now do the download and installation of the 8.0.1 update from Adobe via the link
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
That 8.0.1 installation can be done with Premiere Elements 8 closed.
Adobe set up that 8.0.1 Update so that they is no 8.0.1 shown in the program after installation of it. You will probably get a message of installation completed successful. The major evidence that it has been installed will be the turn off of the previously default "Automatic Background Rendering" in preferences. You still have to turn off the "Automatic AutoAnalzyer" in Elements Organizer, a must do.
Please review the above.
Thank you.
ATR

Premiere Elements 12 output problem

I am having problems outputting my project. Different errors messages. One says transcoding error. Another time it says export error. Other times it crashes. And then the program won't even open.
Any suggestions?
bwatson9

Steve,
First, thank you for your prompt response. This is the first time I have used Premiere Elements 12. I don't seem to have a manual for the software.
The product was bought with my new computer. I am using windows 8.1 (64-bit) with Intel Core i7-4770 CPU @ 3.40GHz. I have 12 GB of installed RAM. I have 1TB hard drive of which this is the first project I done.
I have checked to make sure that I am getting all Windows and Microsoft Updates. I even manually went to Windows Update and installed the optional updates.
The project is a 20 min. video using mostly photos and 2 small video clips. The project is saved in its own folder.
When I go to the timeline in Expert view I do see an orange-yellow line above the timeline. It runs the whole length of the project.
I understand from reading the FAQ's that each photo cannot be larger than 1000 x 750 pixels. I will check that and reduce their size. Is there anything else that I need to do?
Where can I find a manual?
Thanks,
bwatson9
Date: Sun, 23 Mar 2014 06:31:03 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Elements 12 output problem
    Re: Premiere Elements 12 output problem
    created by Steve Grisetti in Premiere Elements - View the full discussion
A lot depends on a lot.
What operating system are you using? What processor do you have and how much RAM and how much free space is on your hard drive?
How long is your project? What model of camcorder is your video coming from and what format and resolution is it?
Have you ensured that your project file is saved to its own folder, with no other project files in this folder?
When you add your video to your timeline in Expert view, do you see a yellow-orange line above the clips, along the top of the timeline? This indicates a mismatch between project settings and video specs.
If you are on a Windows computer, have you set up your computer to get both Windows and Microsoft Updates -- and have you manually gone to Windows Update and ensured you have even the optional updates that don't install automatically?
When did you last run Disk Cleanup and Disk Defragmenter?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6234402#6234402
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6234402#6234402
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6234402#6234402. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Why do I loose rendered footage from my timeline in Premiere Elements 10, after saving my project !

Why do I loose rendered footage from my timeline in Premiere Elements 10, after saving my project on exit! When I reopen the project, the timeline needs rendering again! Can anyone help me with this problem, it's driving me mad!
Is there a fix, or is it a problem with settings in the program! Any help, greatly appreciated! Mike's Media.

Mike,
Welcome to the forum.
Along with the answers to Steve's questions, please tell us about your computer's I/O sub-system, i.e. your computer's HDD's, and especially where the Project, the media and the PrE Scratch Disks are stored. For instance, if everything is on C:\, or perhaps the Project, media and Scratch Disks are all on an external USB 2.0 HDD.
Good luck,
Hunt

Have to re install elements 11 & premiere elements 11. cause problem with upgrade windows 8.0 to 8.1

have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]

have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]

Premiere Elements 11 will not open Projects

I had to rebuild my Win 7 PC. Now Premiere Elements 11 will not open Projects saying that the file types are not supported. It will not open raw DV files either.

Henry Clayton
Along with Premiere Elements 11 on Windows 7 (presumed 64 bit), do you have the latest version of QuickTime installed? Are you running Premiere Elements 11 as Run As Administrator or from a User Account with Administrative Privileges?
Can you open a new project?
When you rebuilt your Window 7, did the source media that went into the existing projects remain in the same save locations with the same file names as before the rebuild?
How are you opening these project.prel files that I am understanding that you created in version 11 before the Windows 7 rebuild?
What is the nature of these "raw DV files" to which you refer? Are these DV AVI standard or widescreen files from a capture firewire into the Premiere Elements Capture Window?
Let us start here and then we can decide what next.
Thanks.
ATR
Add On...I did not see SG's and your posts until after I had posted mine.

Uploading using Adobe Premiere Elements 12 Network problems

Hi,
Is there a place in Adobe Premiere Elements 12 that we can insert our company proxy details, the reason being. When I go to Publish and Share and click "Social Websites" and want to upload a video to youtube and push next it gives the following error "Online Services encountered an error. The services will be terminated or paused if possible."
If I use a 3G card it allows us to upload. Our network must be blocking this link or programme, yet we have made sure from our side adobe is not blocked on the network and I have access to all websites.
My question is can we insert proxy details somewhere or can I get the link of where that link is taking us to when pushing next trying to upload with youtube via adobe . I know it is going to youtube but I need the exact URL to make sure we allow this link to work.
Anyone have the answer for me?

MaudeSt
This is not Adobe. Rather user to user. For network problems when using the current version which is now Premiere Elements 12, please contact Adobe via its Adobe Chat.
Click on the following link, and then find and click on Chat Panel to discuss
Premiere Elements
Downloading, Installing, Setting Up
Downloading, Installing
Chat Panel
Contact Customer Care
I have set the web page to the Chat Panel level. If it does not hold the setting, then you will need to navigate to Adobe Chat using the topics
above as guidelines. If you end up seeing only Ask the Community instead of Chat Panel, then try again later. Chat has been having in times
when it is unavailable due to updating. It is an on and off situation lately. Chat has the option to do remote control of your computer for
troubleshooting purposes. We do not.
At the moment that I am hitting the "Add Reply" for this post, only Ask the Community option is being displayed at the Adobe Chat contact link.
Please let us know the outcome.
Thank you.
ATR

Loading Archived Projects on Premiere Elements 10 - CRASHING PROBLEM

Trying to open an archived project, prompted to locate certain files, and program crashes after selecting file. Running MAC Maverick OS. Project was originally archived on Premiere Elements 10 on Lion OS. Trying to open on Premiere Elements 10 re-installed on Maverick OS. Somebody please help me!!!!!

psnerd
How did you archive the Premiere Elements 10 Lion OS project - Project Archiver, Archive Project or Copy Project?
Are you getting "Where is the file....?" message when you open the project.prel in the archived folder in Premiere Elements 10 Maverick OS? If so, please give the specific file names that are being asked for. Please give the file names of all files and folders that are in the archived folder.
What was the video card/graphics card for the Lion OS, and what is the video card/graphics card for the Maverick OS?
The above details will direct us in developing troubleshooting strategy.
We will be watching for your follow up.
Thank you.
ATR

Help! Premiere Elements 7 won't load project

Premiere elements 7 won't load my project. Icon just spins - for about 10 minutes - then it freezes. Figures that I am so close to finishing!!! What are my options? Can I copy the project and open on another computer? Can I download a newer version of Pre and upload the unifinshed project?? Any help is greatly appreciated!!

Welcome to the forum.
Unfortunately, PrE does not offer that many options, if a Project goes "off."
However, these would be my first steps, and pretty much in this order:
Go to the PrE AutoSaves, and change the View to Details, so you can see the Dates/Times. Try Opening the very latest one. Note: if you have not changed the default, there should be five AutoSave files, and they should be located in the PrE AutoSave folder, in the Project's heirarchy. You want the latest one, not the one with the highest increment. AutoSave 03 could be newer, than AutoSave 05.
If that does not work, then try this - Move your Assets to a new location. Then, Open your original Project. As it loads, you should be presented with "Where is file _____?" and that is what you want.Here is the tricky part. If you have many Assets, and hopefully they are in the same folder, or a few folders, and not spread around the system. I would move all Video Assets to a Video folder, all stills to a Stills folder, all Audio to an Audio folder, etc. as you want to isolate things. When presented with the "Where is file ____?" navigate to the folder with that file, and locate it. PrE will then relink to all used Assets in that folder. This is why I would segregate Assets by type, to isolate the problem, if possible. If all of your Video files load fine, you will get a "Where is file ____?" for the stills, or the music, and repeat. If the Project fails on one Asset type, then you have located the bad Asset by type, and can repeat the exercise, by segregating each file in that Asset type, to a unique folder, navigating to each folder, when prompted, until you find the bad Asset.
In the tests above, never do a Save, but only a Save_As, so as to not overwrite the original PREL file.
Good luck, and hope that it is a bad Asset, and nothing more.
Hunt

Premiere Elements 9 technical problem - please help

Hello,
I have very serious problem with my Premiere Elements 9 for Mac.
This program is turning off over and over again.
I have started to prepare my new project and during the playback oraz during the operations on texts Premiere turns off very often.
It wasn't huge problem for me because I was using save very often but the main problem is that now I can not create any DVD nor export this project to any video file because during the encoding process Premiere is turning off again (usually between 65-95% of the process of encoding)
I tried to open this project on my PC with Windows with Premiere Elements 7 but 7 shows this file is not compatibile with previous version. So I installed ver. 9 on Windows (I bought Mac/Windows) and again Premiere Elements 9 for Windows has shown that my mac file is not compatibile??
I was trying to find any bug fix files on Internet but I haven't found.
Can anybody help me? It's 4 pm here and I need to burn my dvds invitation of my son's birthday for tomorrow and I have stucked.
Here are some additional information:
Adobe Premiere Elements 9 Mac/Windows edition (seperate installing dvds) - legally purchased
Latest MacOs - orignal
No external codecs
No illigal programms
Only legal software
I will appreciate you help.
Kind regards,
Tom
p.s. I use Premiere Elements for few years so I know what to do or wat to click to export file or create DVD

Ha!!!
I found the source of problem
I mentioned that my problems have started when I had added text so I removed all text made by Elements text tool (I noticed that after rendering these object was still with red line instead of green).
So now everything is ok so I'll prepare all texts as a psd transparent files and it will be great
So it is Adobe's error - I hope they will prepare some fix for it.
Anyway, thank you guys for help and support.
I hope I'll finish my project this night because two unsleeping nights are to much for me
Take care,
Tom

Adobe Premiere elements 12 publishing problem.

After making a video in Adobe Premiere Elements 12, I decided to publish it to my computer. However, once it finished rendering it only came out as an audio. The visual video didn't show at all. It played as if it were a song. How can I fix this?

Sparkles3216
If your videos worked with Premiere Elements 10, then they should work with Premiere Elements 12.
From what I have read in this thread, your source seems to be files in amv video format (proprietary) which seem to have relations to MotionJPEG video compression and .avi file extension. Challenging, but. What is the actual file extension of your amv files?
AMV - MultimediaWiki
If you can post a sample of one of these videos that are going into your Premiere Elements 12 project and losing sound in the export from Premiere Elements 12, I would be glad for the opportunity to check it out for you in various versions of Premiere Elements, including 10 and 12. You might send the sample in a Dropbox link posted in your thread reply.
My only requirement is the assurance that you have permission to work with these videos. YouTube license does not allow for downloads of its videos. A person can create a YouTube account, sign into YouTube, can upload a video, and later download his or her own, but not the video of others without permission.
I still do not see the support for the file in Premiere Elements (any version). But if you say that the file worked in Premiere Elements 10, as I said, it should work in Premiere Elements 12.
More later.
Thanks.
ATR

Premiere Elements 11 hangs when opening projects

I have a 64 bit HP ProBook 4740s with Premiere Elements 11 installed. I use my laptop 2 days a week and work from a desktop machine 3 days a week.
The laptop installation of PE11 hangs when I try to open projects but when plugging external hard drive into desktop the project opens fine.
All files are on the hard drive so it's not from missing files.
If I create a new project PE11 runs fine I then create another new project and it hangs
Really frustrated, even reinstalled - still same issues.

Martin-Evans1
We were pleased to learn that your problem was resolved by a just the Premiere Elements uninstall/reinstall
as you wrote in your post 2 and repeated your result in post 4.
As SG pointed out, the details of these issues are important to get at the core of the issues (whys) and expedite
matters to get you moving forward with your projects.
If the problem reoccurs, please get back to SG in this thread with details necessary to help you. In this instance we will not know if the problem was really with the install or rather with corruption of Premiere Elements settings file which could have been handled by deleting the Adobe Premiere Elements Prefs file or the whole folder in which it exists on the hard drive.
Continued success.
Thanks.
ATR

Premiere Elements 3 does not open projects (existing or new)

Last few days I tried a number of solutions suggested on your website including reinstalling Adobe but I still can not access my pro
jects. Adobe does not even open for New Projects. It tells me that a serious error has occured and that it will shut down and try to
save my project. It no longer asks me to save the project under a new name, it just shuts itself down. I have several versions of t
he same project saved at various stages. The project has video clips, a couple of photos, music, narration, titles and transitions a
nd goes for 1h10m. Another project of just photos with titles, music and transitions is only a few minutes in length but still does
not open.

Hi Steve
Good to hear from you. I have been using Premiere Elements for about 10 years and have been using version 3.0 for the past two years. This problem is new and very persistent. I have a project that is 98% complete (1h10m long movie) and Elements was working fine. Then one day when I opened Elements I got an error message saying "Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save your current project." Since then every time I open Elements I get that message but it no longer offers to save it under a new name, just shuts down the program once I click OK. The screen where it lets me choose which project to open appears without any problems, but then when I open the project the error message appears about 10 seconds after the project has finished opening. I have tried opening different projects, and even tried starting a brand new project, but the message appears every time. I tried deleting the prefs file in Application Data as suggested in some forums but that didn't help. I have re-installed Elements several time but the problem still occurs.
My operating system is Windows XP with Service Pack 3. I have 4GB of RAM and two 300GB hard drives, both less than one quarter full. Quicktime and the Realtek drivers are up to date. I recently installed XP Service Pack 3 and some updates for Microsoft Office 2003, but Elements worked fine for several days after this before the problem began occurring. I have also recently had a problem with my computer refusing to shut down however it's shutting down normally now, not sure if that's anything to do with the Elements problem. Virus and spyware scans using Norton and Ad-Aware are all clear.
Hope you are able to help. Thanks, Iwona.

PREMIERE ELEMENTS 7 CLOSES WHEN BURNING PROJECT TO DVD

Hi - I am a new Premiere Elements 7 user. After completing my first project, I attempted to burn to a DVD. I clicked on Share - then Disc. A message came up saying there was a problem and Premiere had to close. I tried this several times.
I did post this problem on Muvipix.com, and received several suggestions from Steve and Chuck, but none of them worked and I'm not sure if they really understood the problem although they did try very hard to help me.
I switched over from Pinnacle because of all the problems I had with them, and I was hoping it would be a simpler process with PE7, but this supposedly basic function isn't working.
I have a brand-new Dell Computer (one month old) with these specs:
Intel Core 2 Processor (2.33Ghz, 1333F SB) w/Quad Core and 4MB Cache
6GB DDR3 SDRAM at 1067 MHz
ATI Radeon HD 4850 XT 512MB
750GB Hard Drive 7200RPM
Vista Home Premium Operating System (64-bit)
16X DVD+/-RW and 16X DVD-ROM
So it's a loaded computer.
I would appreciate any help I can get to solve this problem.
Thanks.
BOB FLEISHMAN

Bob,
I found that by removing everything except Windows, re-starting, installing latest version of Quicktime, re-starting, installing Elements 7, re-starting and then re-installing the rest. It's very time consuming but it eventually works and one can export mpeg as well as burn DVDs.
Alaister Macrae

Adobe Premiere Elements 11 Effects Problem - HELP

I use Adobe Premiere Elements 11, and when I use effects the footage ends up speeding up, repeating itself, and just not staying the same as it originally was. Does this have to do with what type of footage it is. I am using screen-captures that I got when using Bandicam. If anyone could help me with this problem, it would be greatly appriciated, thanks.

Gamerwalk,
One option would be to convert your odd AVI-MPEG file to DV-AVI, which is what PrE loves most. This FAQ Entry will give you some tips on doing that: http://forums.adobe.com/thread/415317?tstart=0
I use an older file conversion program, DigitalMedia Converter 2.7, but it is NOT freeware. Also, Deskshare, the publisher, has released newer versions.
Good luck,
Hunt

Premiere Elements 9.0 problem uploading Project

Similar Messages

Maybe you are looking for