Premiere Elements 9 - file too large

When loading high quality pics (5 meg and up) into Elements 9 I get an error message that the file(s) are too big. Only way around it so far that I have found is to resize my pics before incorporating into Elements 9.
Any other suggestions on how I can get around this. Any comments are welcomed.
Cheers !!!

I agree with Steve.
In PrE, the Scaling algorithms in PS, or PSE, are better, and yield higher quality. This ARTICLE goes into more detail. Note: when originally written, the vast majority of video was SD, at 720 x 480 (NTSC), or 720 x 576 (PAL), but further down the article, mention is made of HD Projects, which run up to 1920 x 1080. That article also goes into detail on doing the Scaling in PS/PSE with automation.
Also, processing overly-large still images is very, very resource intensive, and it only takes a few very large images, before the computer and PrE will choke. This is even true with PrPro CS 5 and 5.5, which now have better Scaling algorithms, but can still suffer with many very large images. It takes a serious NLE workstation, that is perfectly tuned to handle them. If one really needs all those extra pixels, then I strongly recommend that they use After Effects, instead of PrPro, or PrE.
Good luck,
Hunt

Similar Messages

Premiere Elements: Video file too large

i have adobe premiere element 9. i have try 2 down load picture to my timeline but it keep saying "the file video dimension (width/height) to large. can anyone help me. ps. it will accept old picture but not one that i take with my new camera. Jpeg image size says (5184x3888)
Edited by: Kevin Monahan
Reason: More descriptive title needed

nikoatu
Premiere Elements 9.0/9.0.1 restricts that user from importing a still image with greater than 1677216 total pixels.
I have explained the situation in full detail (post 6) in an older thread which dealt with the same issue in Premiere Elements 8.0/8.0.1.
http://forums.adobe.com/thread/624979
In latest versions of Premiere Elements, that block is removed. But, that does not mean because you can exceed 1677216 total pixels that you should. The classical not to exceed pixel dimensions recommendations that you see online include
for SD project, 1000 x 750 pixels
for HD project, 2200 x 1238 pixels
In later version of Premiere Elements and greater computer resources, these classical recommendations can be stretched to a certain degree.
Any questions or need clarification, please do not hesitate to ask.
Thanks.
ATR

Premiere Elements 11 file sizes

Premiere Elements 11 file sizes?
I recorded small 170MB and larger 570MB videos with audio using HyperCam 3.
Both load and play back in Windows Media Player (ver 12.0.7601.18150) without a problem.
I can load and play back the small files in Premiere Elements 11 without a problem.
But, when I load the larger file into Premiere Elements 11, only the sound track loads and plays.
No video track and the preview screen is a solid black box on my monitor.
Is there a file size restriction in using Premiere Elements 11?

Martyson 2010
By the time I downloaded and looked at your sample video, I see that you and nealeh have worked out a workaround, that is, converting your Microsoft Video 1 (CRAM).avi (1920 x 1080 @ 10 frames per second) to H.264.mp4 (1920 x 1080 @ 30 frames per second.
I was able to convert your sample video into H.264.mp4 (1920 x 1080 @ 30 frames per second using the free HandBrake program). All 11 minutes 52 seconds of the H.264.mp4 imported into Premiere Elements 11 without issue.
In the case of these converters, we are dealing with changes in at least video compression, file extension, and frame rate.
However
The tests brought up some interesting questions
1. When I ran your file through the gspot utility, the video codec was shown as Microsoft Video 1 (CRAM), but it listed Codec NOT installed.
2. In spite of the Codec NOT installed, I was able to play back your video in Windows Media Player and VLC Player.
3. Your Microsoft Video 1 (CRAM).avi imported with the complete duration of the file, but only audio, no video.
Further
4. When I ran my own Premiere Elements 11 created Microsoft Video 1 (CRAM).avi (30 frames per second, 11 min duration) through gspot, the video codec was shown as Microsoft Video 1 (CRAM), but it listed Codec NOT installed - same as yours.
5. Yet, my file imported into Premiere Elements 11 completely (video and audio).
6. I need to run a Microsoft Video 1 (CRAM).avi 10 frames per second, 11 min duration) to see if I get the same results as in 5.
When you record your video, do you have the option of changing the frame rate from 10 to 30 frames per second?
So, some of the questions that the remain for me
a. Why is my Premiere Elements 11 created Microsoft Video 1 (CRAM) appearing to be different from the Microsoft Video 1 (CRAM) that you use in your file?
b. Why is gspot telling me that the Microsoft Video 1 (CRAM) codec is not installed when I can use it in Premiere Elements 11 for the import and export of my own file?
ATR

Premiere Elements Project file wount open in Premiere Pro CS6

My friend Just bought Premiere elements 13 and created a Project. I cant open the Project in Premiere Pro CS6. Getting this error message:
"The Project appears to be damaged, it cannot be opened."
The Project workes fine in Premiere Elements 13
What can I do? What is wrong?

If you have done this:
Import a Premiere Elements project (Windows only)
   Select File > Open Project.
   Browse to an Adobe Premiere Elements project file, with file extension PREL.
   Click Open.
Premiere Pro converts the Premiere Elements project file to a Premiere Pro project file.
and it wont work Elements 13 is probably too new for CS6.

Why is the image in my capture window of Premiere Pro 2 is too large.

The image in my capture window of Premiere Pro 2 is too large, however the capture is correct on the time line for editing.
Why is it too large? and how do I correct it?
Thank you for taking the time to read this e-mail and for answering my question.
Yours truly,
Thom Elliott
Photographer

Also, for future reference, PPro2 has a different forum http://forums.adobe.com/community/premiere/premierepro_previous?view=all
For this discussion, what are you editing?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Disk Utility: Creating a new blank image receiving "file too large" error.

Hello All!
I'm trying to create a 10GB non-encrypted, non-compressed RW blank image via the disk utility. The DU runs for a few minutes then barfs out "file too large" error. I have over 30GB free on my HDD. I tried with a smaller size of 6GB to no avail. Also tried unsuccessfully to create from a file (about 4 GB). My ultimate goal is to create a case-insensitive image to run an extremely important program needed for high priority work productivity (i.e. WoW). Thanks in advance for any advice! You will be my new best friend if you help me resolve this. =D
Hollie
"There are only 10 types of people in this world: Those who understand binary, and those who don't."

Hi Hollie, and welcome to the forums!
Have you created images before successfully?
Is this to/on your boot drive, or an external drive?
Have you done any Disk/OS maintenance lately?
We might see if there are some big temp files left or such...
How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is now free, and likely the best/easiest...
http://www.omnigroup.com/applications/omnidisksweeper/
WhatSize...
http://www.macupdate.com/info.php/id/13006/
Disk Inventory X...
http://www.derlien.com/
GrandPerspective...
http://grandperspectiv.sourceforge.net/

File too large error unpacking War during app deploy - RHEL &WLS 10.3.5

I'm stumped and I'm hoping someone can help out here. Does anyone have any insights into the cause of my problem below, or tips on how to diagnose the cause?
scenario
We ran into an open files limit issue on our RH Linux servers, and had the SA boost the our open files limit fro 1024 to 3096. This seems to have solved the open files limit issue, once we restarted the node managers and the managed servers (our WLS startup script sets the soft limit to the hard limit).
But now we've got a new issue, right after this change. The admin server is now no longer able to deploy and war/ear, as when I click on "Activate" after the install I get
Message icon - Error An error occurred during activation of changes, please see the log for details.
Message icon - Error Failed to load webapp: 'TemplateManagerAdmin-1.0-SNAPSHOT.war'
Message icon - Error File too large
on the console, and see the stack trace below in the Admin server log (nothing in the managed server logs) - indicating it's getting the error in exploding the war.
I've tried both default deployment mode, and the mode "will make the deployment available in the following location" where the war is manually copied to the same location on each box, available to each server - all with the same result. I've also tried restarting the admin server, but no luck.
The files are not overly large (<=34 MByte) and we had no trouble with them before today. I'm able to log in as the WebLogic user and copye files, etc. with no problem.
There is no disk space issue - plenty of space left on all of our filesystems. There is, as far as I can tell, no OS or user file size limit issue:
     -bash-3.2$ ulimit -a
     core file size (blocks, -c) 0
     data seg size (kbytes, -d) unlimited
     scheduling priority (-e) 0
     file size (blocks, -f) unlimited
     pending signals (-i) 73728
     max locked memory (kbytes, -l) 32
     max memory size (kbytes, -m) unlimited
     open files (-n) 3096
     pipe size (512 bytes, -p) 8
     POSIX message queues (bytes, -q) 819200
     real-time priority (-r) 0
     stack size (kbytes, -s) 10240
     cpu time (seconds, -t) unlimited
     max user processes (-u) unlimited
     virtual memory (kbytes, -v) unlimited
     file locks (-x) unlimited
environment
WLS 10.3.5 64-bit
Linux 64-bit RHEL 5.6
Sun Hotspot 1.6.0_29 (64--bit)
stack trace
####<Mar 6, 2013 4:09:33 PM EST> <Error> <Console> <nj09mhm5111> <prp_appsvcs_admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <steven_elkind> <> <> <1362604173724> <BEA-240003> <Console encountered the following error weblogic.application.ModuleException: Failed to load webapp: 'TemplateManagerAdmin-1.0-SNAPSHOT.war'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.io.IOException: File too large
at java.io.FileOutputStream.writeBytes(Native Method)
at java.io.FileOutputStream.write(FileOutputStream.java:282)
at weblogic.utils.io.StreamUtils.writeTo(StreamUtils.java:19)
at weblogic.utils.FileUtils.writeToFile(FileUtils.java:117)
at weblogic.utils.jars.JarFileUtils.extract(JarFileUtils.java:285)
at weblogic.servlet.internal.ArchivedWar.expandWarFileIntoDirectory(ArchivedWar.java:139)
at weblogic.servlet.internal.ArchivedWar.extractWarFile(ArchivedWar.java:108)
at weblogic.servlet.internal.ArchivedWar.<init>(ArchivedWar.java:57)
at weblogic.servlet.internal.War.makeExplodedJar(War.java:1093)
at weblogic.servlet.internal.War.<init>(War.java:186)
at weblogic.servlet.internal.WebAppServletContext.processDocroot(WebAppServletContext.java:2789)
at weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServletContext.java:2666)
at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:413)
at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:493)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:418)
at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:972)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:382)

In the end, the problem was not in the Admin server where the log entry is, but in one of the managed servers where there was no such log entry.
Somehow, and we have no idea how, the NodeManager process had the soft limit for max file size set to 2k blocks. Thus, the managed server inherited that. We restarted the Node Manager, then the managed server, and the problem went away.
The diagnostic that turned the trick:
cat /proc/<pid>/limits
for the managed server showed the bad limit setting, then diagnosis proceeded from there. The admin server, of course, had "unlimited" since it was not the source of the problem.

Opening Premiere Elements 10 files from PC on a Mac

I am using Premiere elements 10 files from PC on Mac OS Mtn Lion saved as .prel and get message "this project is not compatible with current version of Premiere Elements". Please help. thank you.

There is a Premiere Elements forum where you may find better answers :
http://forums.adobe.com/community/premiere_elements

File too large - attachment settings not working

Hi there
We are having problems with attaching files in IMS 5.2 & wondered if anybody can help.
Our outgoing mail message max size is set to 50MB (I know about the extra 33% space required for encoding) and yet we still cannot attach files to emails that are greater than 5MB.
Does anyone have any idea why this is not working?
Anytime we try to send a 7 or 8 MB file an error "File too large "comes up right away
The settings in the messaging server console is set to 50MB. This is under the HTTP service
There was a previous post but the solution did not solve my problem.
Can anyone help?
Thanks

There are separate settings for webmail attaqchments. Please check documentation at:
http://docs.sun.com/source/816-6020-10/cfgutil.htm
and look at:
service.http.maxmessagesize
and
service.http.maxpostsize
these both default to 5 megs.
You have to restart the webmail daemon to make a change take effect.

TFTP file too large for upload

I'm trying to upgrade my router via TFTP. I keep getting this File too large for TFTP error. I'm using the recommended TFTP server from Solarwinds.
There does not seem to be any setting in the server to let large file pass, It's the first time I see that, but this is the biggest IOS I had to upload. I had no problem sending the last IOS witch is only about 3MB smaller.

correct. copy ftp://userid:password@servername/directory/filename flash:
For more information, refer to the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tcf_r/cf_02ht.htm#wp1032450
Hope this helps,

WebLogic Issue: File too large

Hi All,
I am getting below error in logs while starting the WLS (10.3.5 on IBM AIX 6.1 using IBM JDK) AdminServer:
####<Nov 8, 2012 10:28:45 PM PST> <Notice> <Security> <edrpoc10.ftb.ca.gov> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352442525279> <BEA-090082> <Security initializing using security realm myrealm.>
####<Nov 8, 2012 10:28:51 PM PST> <Notice> <WebLogicServer> <edrpoc10.ftb.ca.gov> <AdminServer> <main> <<WLS Kernel>> <> <> <1352442531303> <BEA-000365> <Server state changed to STANDBY>
####<Nov 8, 2012 10:28:51 PM PST> <Notice> <WebLogicServer> <edrpoc10.ftb.ca.gov> <AdminServer> <main> <<WLS Kernel>> <> <> <1352442531304> <BEA-000365> <Server state changed to STARTING>
####<Nov 8, 2012 10:28:54 PM PST> <Warning> <oracle.as.jmx.framework.MessageLocalizationHelper> <edrpoc10.ftb.ca.gov> <AdminServer> <JMX FRAMEWORK Domain Runtime MBeanServer pooling thread> <<anonymous>> <> <0000JfZqpLg4ykJLQm5Eid1GbAAX000001> <1352442534039> <J2EE JMX-46041> <The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.>
####<Nov 8, 2012 10:28:57 PM PST> <Error> <Deployer> <edrpoc10.ftb.ca.gov> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352442537493> <BEA-149205> <Failed to initialize the application 'adf.oracle.domain [LibSpecVersion=1.0,LibImplVersion=11.1.1.2.0]' due to error weblogic.application.library.LibraryDeploymentException: [J2EE:160141]Could not initialize the library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0. Please ensure the deployment unit is a valid library type (war, ejb, ear, plain jar). weblogic.application.library.LibraryProcessingException: java.io.IOException: File too large
     at weblogic.application.internal.library.EarLibraryDefinition.init(EarLibraryDefinition.java:93)
     at weblogic.application.utils.LibraryLoggingUtils.initLibraryDefinition(LibraryLoggingUtils.java:277)
     at weblogic.application.internal.library.LibraryDeployment.prepare(LibraryDeployment.java:44)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.io.IOException: File too large
     at java.io.FileOutputStream.writeBytes(Native Method)
     at java.io.FileOutputStream.write(FileOutputStream.java:282)
     at weblogic.utils.io.StreamUtils.writeTo(StreamUtils.java:19)
     at weblogic.utils.FileUtils.writeToFile(FileUtils.java:117)
     at weblogic.utils.jars.JarFileUtils.extract(JarFileUtils.java:285)
     at weblogic.utils.jars.JarFileUtils.extract(JarFileUtils.java:246)
     at weblogic.application.io.ExplodedJar.extractJarFile(ExplodedJar.java:301)
     at weblogic.application.io.ExplodedJar.<init>(ExplodedJar.java:54)
     at weblogic.application.io.Ear.<init>(Ear.java:47)
     at weblogic.application.internal.library.EarLibraryDefinition.init(EarLibraryDefinition.java:81)
     ... 16 more
####<Nov 8, 2012 10:28:59 PM PST> <Error> <Deployer> <edrpoc10.ftb.ca.gov> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352442539037> <BEA-149205> <Failed to initialize the application 'emai' due to error weblogic.application.library.LibraryDeploymentException: [J2EE:160141]Could not initialize the library Extension-Name: emai. Please ensure the deployment unit is a valid library type (war, ejb, ear, plain jar). weblogic.application.library.LibraryProcessingException: java.io.IOException: File too large
Any pointers on resolving the issue?
Regards,
Sunny
Edited by: ajmerasunny on Nov 9, 2012 10:23 AM

Hi Sunny,
The issue is because in your OS AIX,You dont have the support for largefile .
How do you enable largefile support in AIX?
On file /etc/security/limits , change the value of "fsize" to -1 . "-1" denotes unlimited. Log-off and login , stop & start applications to make largefiles work.
Ref: http://unixfoo.blogspot.in/2008/11/aix-filesystem-tips.html

Weblogic 10 - application deployment error: Exception is: "File too large"

I posted this in Weblogic -> general but realise is should have really gone here as it's about admin server/deployment services setup / configuration.
I am using weblogic application server 10 in a weblogic clustered enviornment.
I am trying to deploy an application to a managed server when it starts up, all goes well and I can see it deploying the war files to the managed server.
It hits a certain war and panics with the exception
####<Nov 19, 2011 2:03:59 PM BRST> <Error> <Deployer> <devnode01> <managedserver2> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <1321718639109> <BEA-149205> <Failed to initialize the application 'test_war' due to error weblogic.management.DeploymentException: Exception occured while downloading files.
weblogic.management.DeploymentException: Exception occured while downloading files
at weblogic.deploy.internal.targetserver.datamanagement.AppDataUpdate.doDownload(AppDataUpdate.java:43)
at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
at weblogic.deploy.internal.targetserver.BasicDeployment.prepareDataUpdate(BasicDeployment.java:682)
at weblogic.deploy.internal.targetserver.BasicDeployment.stageFilesForStatic(BasicDeployment.java:725)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:104)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.io.IOException: [DeploymentService:290066]Error occurred while downloading files from admin server for deployment request "0". Underlying error is: "[DeploymentService:290065]Deployment service servlet encountered an Exception while handling the deployment datatransfer message for request id "0" from server "managedserver2". Exception is: "File too large"."
at weblogic.deploy.service.datatransferhandlers.HttpDataTransferHandler.getDataAsStream(HttpDataTransferHandler.java:86)
at weblogic.deploy.service.datatransferhandlers.DataHandlerManager$RemoteDataTransferHandler.getDataAsStream(DataHandlerManager.java:153)
at weblogic.deploy.internal.targetserver.datamanagement.AppDataUpdate.doDownload(AppDataUpdate.java:39)
at weblogic.deploy.internal.targetserver.datamanagement.DataUpdate.download(DataUpdate.java:56)
at weblogic.deploy.internal.targetserver.datamanagement.Data.prepareDataUpdate(Data.java:97)
at weblogic.deploy.internal.targetserver.BasicDeployment.prepareDataUpdate(BasicDeployment.java:682)
at weblogic.deploy.internal.targetserver.BasicDeployment.stageFilesForStatic(BasicDeployment.java:725)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:104)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
The error appears to be stating the physical file is too big to be deployed
I'm running the managed servers with a heap size of 3GB and the managed server is running with 2GB - I know these are large but they where being used for debugging
I can't find any documentation on the file size too large error, or how to resolve it
DeploymentService:290065 says to look in the log (details are above) and DeploymentService:290066 says the error will be explained in it's description, which it is, "file size too big", it doesn't say where to see/set the max file size, there is plenty of disk space so I can only assume it's setting for the deployment service that needs to be increase, but I cannot find info on this.

I don't think this would help, but would using the nostage option for deployment change this behaviour.
I don't think it would as this is for disk based problems rather than transfer size issues.

Attachment file too large

Hello,
I have messaging server 7.
I am composing the message having attachment around 5MB and 4.2 MB
It says file too large.
I checked the domain level attachment quota, it is unlimited.
i tried putting value 10,1000, however no effect.
what am I missing.
Users quota is unlimited.
regards,
Sumant

mr.chhunchha wrote:
I am composing the message having attachment around 5MB and 4.2 MB
It says file too large.There are two limits that control the size of emails composed in the various webmail interfaces (Messenger Express/UWC/Convergence):
bash-3.00# ./configutil -H -o service.http.maxpostsize
Configuration option: service.http.maxpostsize
Description: Maximum HTTP post content length. If not specified, uses max(5*1024*1024, service.http.maxmessagesize).
Syntax: uint
service.http.maxpostsize is currently unset
bash-3.00# ./configutil -H -o service.http.maxmessagesize
Configuration option: service.http.maxmessagesize
Description: Maximum message size client is allowed to send.
Syntax: uint
Default: 5242880
service.http.maxmessagesize is currently unset
So the service.http.maxpostsize is the maximum size of any given attachment upload the service.http.maxmessagesize is the maximum overall size of the email => both are set to 5MB by default.
After changing the configutil settings you need to restart the mshttpd process for the change to take effect (./stop-msg http;./start-msg http).
Regards,
Shane.

BR0253E errno 27: File too large in db13

Dear,
When I am taking full online backup via DB13 . it give follwing error.Our this data file size is near about 3 Gb.Archive log is working fine.
BR0202I Saving /oracle/PRD/sapdata1/sr3_3/sr3.data3
BR0203I to /dev/rmt/1mn ...
#FILE..... /oracle/PRD/sapdata1/sr3_3/sr3.data3
#SAVED.... sr3.data3 PRD_ON_01/6
BR0280I BRBACKUP time stamp: 2011-09-01 14.42.08
BR0063I 3 of 88 files processed - 6000.023 MB of 251452.688 MB done
BR0204I Percentage done: 2.39%, estimated end time: 15:55
BR0001I *_________________________________________________
BR0252E Function fwrite() failed for '/oracle/PRD/sapbackup/begrilim.spa/sr3.data34' at location BrSparseCreate-8
BR0253E errno 27: File too large
BR0280I BRBACKUP time stamp: 2011-09-01 14.42.10
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: begrilim.fnt 2011-09-01 14.42.08
BR0280I BRBACKUP time stamp: 2011-09-01 14.42.10
my initSID.sap setting is given below.
backup_mode = all
restore_mode = all
backup_type = online
backup_dev_type = tape
backup_root_dir = /oracle/PRD/sapbackup
stage_root_dir = /oracle/PRD/sapbackup
compress=hardware
compress_cmd = "compress -c $ > $"
uncompress_cmd = "uncompress -c $ > $"
compress_dir = /oracle/PRD/sapreorg
archive_function = save
archive_copy_dir = /oracle/PRD/sapbackup
archive_stage_dir = /oracle/PRD/sapbackup
tape_copy_cmd = dd
disk_copy_cmd = copy
stage_copy_cmd = rcp
pipe_copy_cmd = rsh
cpio_flags = -ovB
cpio_in_flags = -iuvB
dd_flags = "obs=128k bs=128k"
dd_in_flags = "ibs=128k bs=128k"
saveset_members = 1
copy_out_cmd = "dd ibs=8k obs=128k of=$'
copy_in_cmd = "dd ibs=128k obs=8k if=$"
tape_size = 800G
exec_parallel = 0
tape_address = /dev/rmt/1mn
Regards

Hi Pooja,
This note may be helpful.
Note 553854 - Oracle: Problems with file size limit
This note has information about the error "<unix> Error: 27: File too large"
Br,
Venky.

6280 : file too large

Hi,
I have a 6280 model and I try to send an e-mail message with an attachement larger then 100k. I receive a "file too large" message. I'm using an POP3 mail account. Memory status show 2,1 Mb free on the phone memory. When I try with an attachement smaller then 100 k it works. Nokia service in my cowntry tell me this is a phone manufacturer limit (100k) but i think this is stupid. Can I do something ?

i know that thing, that's just the bad bits about the phone it cant send larger than 100k, i dont think you could do anything about it.
Nokia N95
V 20.0.015
0546553

Premiere Elements 9 - file too large

Similar Messages

Maybe you are looking for