Premiere Elements 9 Lose Motion Effects after Share

Hi all,
I seem to be having a serious issue after sharing/exporting my video:
I have recently finished a 20-minute informational video for work that involves lots of screen capture of my desktop. The screen capture was done with VLC media player. Once I imported the screen capture (.mp4) videos in adobe premiere, I used the motion effect to only display the part of the screen that I want to by changing the scale and position fields for the entire duration of these screen capture videos. Watching the video in premiere after rendering shows everything is fine. But once I export the video, all these motion effects are clearly not present: the screen capture parts of my video are not scaled at all and instead show the entire desktop.
What is the issue here?
Have I misunderstood what the motion effect is meant to be used for? I am really looking for something to trim/zoom into parts of a video and it sounded like the motion effect was the solution, but I am not entirely sure.
Thank you very much to anyone who assists!
Skyler

Skyler Freeman
Please excuse the question, but am asking just in case.
When you say that you are using Motion Effects (Scale and Position) for your .mp4 video on the Timeline, does that mean that you are keyframing the Scale and Position properties in the Properties Palette/Motion Panel/Scale and Position properties (using the Toggle Animation button there to initiate the keyframing)?
Please include in your response to SG.
Thanks.
ATR

Similar Messages

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Reinstall Photoshop Elements 13 and Premiere Elements 13 on new PC after old one crashed ?

How can I reinstall Photoshop E 13 and Premiere E.13 on new PC after old PC crashed? Obviously I was not able to disinstall prior to crash.
Thanks for your help. EME

Many thanks !
De : Peru Bob
Envoyé : vendredi 20 mars 2015 23:38
À : Elizabeth Mac Eachran
Reinstall Photoshop Elements 13 and Premiere Elements 13 on new PC after old one crashed ?
created by Peru Bob in Photoshop Elements - View the full discussion
Scroll down and use the chat option from this link to get the old installation deactivated:
Activation & Deactivation Help
Then download and reinstall from here:
Download Photoshop Elements products | 13, 12, 11, 10
Download Premiere Elements products | 13, 12, 11, 10
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7322374#7322374 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7322374#7322374
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

After successfully installing premiere&elements 12, both programs abort after signing in. Fix pls?

After successfully installing premiere&elements 12, both programs abort after signing in with correct login & password. How can I fix it?

Moving this discussion to the Photoshop Elements forum.
M.Angela are you able to log into http://www.adobe.com/ successfully? Also which operating system are you using?

I need to be able to take my project from premiere elements and put it in after effects.

I need to keep the format the same, and also be able to see all individual clips and move them around/trim them in the workbar area in after effects just like what you can do in elements 11.

sam.loomis1234
The only way out of Premiere Elements 11 is via export in video format (except for jpegs or audio under Publish+Share/Computer/Image or audio).
The video is whole, not in a project file (project.prel).
And, the Premiere Elements 11 project.prel does not appear to be an After Effects supported project format
http://helpx.adobe.com/after-effects/kb/supported-file-formats-effects-cs4.html#main_head1
Have you asked this question in the Adobe After Effects Forum regarding supported formats?
http://forums.adobe.com/community/aftereffects_general_discussion
ATR

Premiere Elements 12 does not start after error message: display driver is incompatible

After successful installation and starting Premiere Elements the following error message appears: "Uncompatible display driver identified. Update the display driver for a better and faster playback performance!" Hopefully my translation from German is helpful enough. I confirmed with OK but unfortunately Premiere Elements does not start. I checked the display driver: it is the most actual one: AMD Radeon HD 7610M. Furthermore the hardware should be OK as well: ASUStek with an Intel Core i5-2450M CPU @2.5 GHz; 6 GB RAM; 64 Bit Windows 7 Service Pack 1. What can I do?

Moonkeys25
Recap...please confirm that as of this date, the problem exists with or without the antivirus and firewall(s) disabled.
Moving forward...
If you issue was specific to the display card error that you have been getting then probable conclusions
a. the ADM Radeon H7610M driver version is not up to date
or
b. the ADM Radeon H7610 M video card/graphics card installed as is is not compatible with Premiere Elements 12 on your Windows 7 SP1 64 bit
The updated driver version and the BadDrivers.txt file deletion should have corrected the problem unless there is a gross mismatch between Premiere Elements 12 and ADM Radeon H7610M.
Did you use the link that John posted to get the auto detection of the latest driver version for the ADM card?
If we have gone as far as we can with the card and its driver version angle on this, then we can try the generalized troubleshooting drills with no guarantees, just hopes
1. Delete the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. You just need to make sure to have the computer's Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
2. If "1" has no effect on the issue...uninstall, ccleaner run through time, reinstall with antivirus and firewalls turned off.
a. Control Panel/Program, select Adobe Premiere Elements 12, right click the entry and click on the Uninstall pop up. Then follow the instructions for the uninstall.
b. Download and install the free ccleaner for a computer run through to get rid of leftovers from incomplete uninstalls and installs.
https://www.piriform.com/ccleaner/download
When you are ready for this step, I will give you a step by step through the ccleaner (regular cleaning part and registry cleaning part).
c. Reinstall from your installation files or installation disc, with antivirus and firewall(s) disabled.
Please review above and then let me know if I have interpreted correctly where we are in the troubleshooting. Do not start the above plan until we are in agreement on the details and hoped for results.
Thanks.
ATR

Using Premier Elements - no sound in video after "Share & Publish" and exporting to my computer

I'm using Premiere Elements 13 on a PC (bought the disc and it's installed and registered.) I created a music video using many video clips and 3 different audio tracks. All audio was unlinked from the video. Some of the audio is from video AVIMovie and some is MP3 format. It plays just fine while I am editing it and after I save and then open to continue editing. I used the Publish and Share to export it to my computer. After it finished I tried playing it - in Windows Media Player - and there is no audio. What am I doing wrong?

I assume you already did this? https://wiki.archlinux.org/index.php/Pu … #GStreamer

Photoshop premiere elements 13 no email option under share PC

I created a trade show ad using photoshop elements premiere 13. I need to email this project, yet there is no email option to choose from the list under "share" I specified outlook as my email client and I'm using a pc. Any help would be great. Thanks

valbom
Premiere Elements comes with an Elements Organizer, and it is that Elements Organizer/Share that has had the Photo Mail and Email Attachments choices.
In Elements Organizer 13/Share that comes with Premiere Elements 13, Photo Mail and Email Attachments names are gone from the list under Share and only
"Email" is seen. Using this Email choice, you can email photos and videos as attachments. You will get a warning message if the file size exceeds 10 MB, but I have been able to send a 25 MB video, using Gmail in preferences and sending it to myself at my Gmail address. The size issue goes to the Internet provider limitations rather than the Share feature. Although the email was "successfully" sent at that size, I am still trying to verify that I will receive it.
What I found a challenge was setting up this "Email" in preferences. With Email Clients = AOL, Gmail, Yahoo!Mail, or Microsoft Account (HotMail), there should not be any problems since the user is not asked to specify a Server Name or Port. But, if you have to go to "Other" and give those details, problems. I am going to be writing this up in my blog within the next 24 hours. The blog will have more details....most important I will write how to clear the mess after you go to Other and have a list of non working Email Profiles that refuse to delete within the preference area.
What are the details of your situation? What Email client do you want to use? And, will an Email attachment serve your purposes.
To be continued....
ATR

Premiere Elements 11 Sound turns off after 5 seconds on DVD

Hi Folk,
I have been using Elemnts 11 for a few months with good success. I created a video from 8-9 clips and it play fine in the tool. I can see the images OK and hear all the audio throughout the video. When I burn a DVD to a Folder on my laptop and play it using Quick time the audio drops out after about 5-6 seconds. I also did a test run and burned the DVD files to a physical DVD and tried to play it and got the same result of the audio droping out.
Thaks For you help,

SnapDragon_M5
Bottom line: I have no problem taking your M2U00715.MPG file into Premiere Elements 11 NTSC DV Widescreen project and burning it to DVD-VIDEO Widescreen on a DVD-RW (4.7 GB/120 min) disc, with full playback of video and audio on the computer or via the DVD player of my TV.
These are the details:
Your source media
720 x 480 @ 29.97 interlaced frames per second. MPEG2 video compression and Dolby Digital Stereo 2 channel audio. This interlaced video is characterized by Fields = Upper Field First, so this must be taken into consideration when the end product is DVD-VIDEO whose format calls for Fields = Lower Field First.
Importing the file could be done two ways:
a. Add Media/Files and Folder/ and then dragging the file from Project Assets to the Timeline. The program should automatically set the project preset at NTSC Hard Disk Flash Memory Camcorders Widescreen 48 kHz because it is recognizing that Fields = Upper Field First. Check Edit Menu/Project Settings to verify that is indeed what the program did.
IMPORTANT. When you bring the file into Add Media, look for a progress bar at the bottom right of the interface. I found an Indexing, followed by a Conforming process at that point. Do not proceed with any work until after those activities are completed and the progress bar closes.
or
b. Opening Premiere Elements 11 Windows, going to File Menu/New/Project, selecting NTSC DV Widescreen in the New Project dialog, putting a check mark next to "Force selected settled Project Setting for this project" and exiting from there. Then I imported the clip with Add Media/Files and Folders to Project Assets from where I dragged the file to the Timeline. On the Timeline, I right clicked the clip, selected Field Options and its Reverve Field Dominance option.
I used b.
What was on that Timeline had a duration of 50 minutes and 47 seconds. In the burn dialog, the Quality section, the Space Required = 3.15 GB and Bitrate = 8.00 Mbps (megabits per second). The DVD-VIDEO was produced via Publish+Share/Disc/DVD disc, using the preset = NTSC_Widescreen_Dolby DVD. The DVD-VIDEO on DVD disc was completed in about 30 minutes. It played back with Windows Media Player, VLC player, CyberLink Power DVD with full video and audio.
In view of the above, I would suggest the following:
1. Repeat what I have just described as a successful run. Take the Organizer out of the equation for now and import the file directly from its hard drive save location via Add Media/Files and Folders.
2. When that file hits Project Assets, do not drag it to the Timeline until you are sure that there is no progress bar at the bottom right of the interface, indexing and/or conforming the file.
3. If there is no sound or only a bit of sound on the DVD-VIDEO disc produced, then take the disc to someone else's computer to determine if the file has no sound with this other person's player (computer or TV DVD player).
4. This one file has a file size of about 2 GB. How many files are you typically burning to DVD-VIDEO from the Timeline. In this context, how much available RAM and free hard drive space does your computer have? Are you getting any low memory messages at any time during the workflow?
Please review, let us know the results, and we will try to help further if needed.
Thanks.
ATR

Premiere Elements 11 will not open after required restart following the installation

An Adobe support tech assisted me with the installation of Photoshop Elements 11 & Premiere Elements 11 using live chat. Before disconnecting live chat, the tech reminded me to restart my computer before using these two programs. I restarted the computer and Photoshop Elements 11 opens and Premiere Elemenst 11 did not. How can I fix this?

Jeff,
Thanks for helping. I tried going to the link and it offered a few different selections to choose from. I tried them all. The one thing it did do, is had me download the Adobe Support Advisor. This checked for problems which it identifed a few things.
When I click on the underlined link, it took me to a website telling me there was conflict with another adobe program running during the installation. I clicked on the button sending the "package" to adobe for their reference.
I have attempted the whole process over again after going into msconfig and disabling everything in the services tab (with MS items hidden), made sure there was nothing in the startup that was adobe related, and disabled the security. This still had the same outcome - doesn't open up after install.
As directed by the link, I tried to look at the install logs located in :/program files (86)/common files/adobe/installers. This "installers" folder doesn't exist.
Everytime I install this program, it ends telling me the program installed correctly.
Am I following your instructions right? I'm learning as we go.
Let me know,
Thanks!
Larry

Premiere Elements 12 will not run after install

Long time Premire and Premiere Elements user. Had been using PE 9 earlier this week. Yesterday purchased PE 12. Before even downloading, to avoid any potential conflicts, I uninstalled PE 9, then installed PE12. After reboot, I attempted to launch the application. it fails.
Based on http://forums.adobe.com/message/6329465#6329465 I did not find any prefs files, but removed (both) 12.0 directories in an attempt to help things along. Nothing.
When I attempt to launch PE 12, "create new project" it just hangs. This is the dump from Windows in the "stopped working" dialog box:
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          ADOBE PREMIERE ELEMENTS.EXE
Application Version:          12.0.0.0
Application Timestamp:          523cd4d5
Fault Module Name:          dvamarshal.dll
Fault Module Version:          11.0.0.0
Fault Module Timestamp:          523cc62d
Exception Code:          c0000005
Exception Offset:          0000000000034961
OS Version:          6.1.7601.2.1.0.768.3
Locale ID:          1033
Additional Information 1:          5a5c
Additional Information 2:          5a5c7f2099c49d46ef167594373b054c
Additional Information 3:          e2a1
Additional Information 4:          e2a18ccc946fae77ae70bd7ffb1dd642
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Help is greatly appreciated. I have a project I need to edit and post today if possible. Would like to get this working ASAP.
WIn 7 Home Premium, 64-bit, 8 GB RAM. Nothing else actively running save Chrome at time of repeated failures.
Thanks in advance

Caleb
Thanks for letting us know of the outcome of your contact with Adobe.
I do not work for Adobe nor am I affliated with it in any way. Just a user in a user to user forum.
In my troubleshooting of various Premiere Elements has have not yet run into a connection between the dvamarshal.dll and the computer's video card/graphics card. But, video card/graphics card compatibility issues can cause the type of problems that you see in the program.
What video card/graphics card does your computer use? Under Device Manager/Display Adapters/, do you see only one card listed or two? Assuming that the card(s) are up to date, then please try the following. We are going to delete the BadDrivers.txt file for Premiere Elements 12. In Windows 7, 8, or 8.1 64 bit, it can be found
Local Disk C
Program Data
Adobe
Premiere Elements
and in the Premiere Elements Folder is the BadDrivers.txt file that you delete. In this Premiere Elements Folder are folders besides this BadDrivers.txt file. You do not want anything in the folders in the Premiere Elements Folder, only the file named BadDrivers.txt file. (When you open a new project, the program will generate a new BadDrivers.txt file and hopefully all will be resolved.) Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
The rationale behind the above approach is explained in the following older thread (post 10). BadDrivers.txt deletion has proven to be a life saver for those with display issues in 9 as well as later versions.
http://forums.adobe.com/thread/732067
About reverting to Premiere Elements 9.0/9.0.1....
We can get tryout files for 9 from the following web site, and you can insert your purchased serial number in them....
http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
You have to read the instructions very carefully so that you do not get hit with an Access Denied message.
But, we need to get your purchased serial number. If you registered Premiere Elements 9 with Adobe, you should be able to see it at http://www.adobe.com under "My Products".
Please review and consider the above and then we can decide what troubleshooting strategy needs to be developed.
Thanks.
ATR

Premiere Elements 9 loses activation

I have a lab that is running Adobe Premiere Elements 9 with DeepFreeze (always restores to last saved state on reboot). I've been getting told that every so often someone will open a video project and the program will ask for the serial number or to continue trial, but as soon as I restart the computer it is back to being properly activated.
The kids using the software are basic users, so they can't be deactivating the product in the Help menu as it's greyed out.
Has anyone had an issue with Premiere Elements reasking for a serial number after product activation?

Welcome to the forum.
With licensing on a network, you will be best served contacting Adobe Customer Support, as they should be able to help you.
My guess is that DeepFreeze is playing some role in this, but as I do not know the program, that's just speculation on my part.
Good luck,
Hunt

Premiere Elements 8.0 stops loading after finding specific dll

Hi All,
Just downloaded trial version of PE8.0. Install went well, but aftr selecting 'create new project' from the start-up menu, the app hangs, and I have to kill it manually using ProcessExplorer. I thought at first it was my firewall (Kaspersky) but after turning that off, the problem still persists.
A new project initialises (according to top right status text which is continually moving) and certain applets, filters, etc start to load, but the hang happens when it attempts to load SaffireComp.dll. Now I have SaffireComp.dll (an audio compressor plugin) as part of my plug-ins for Cubase (a sequencer package), so maybe this is causing the problem, although Cubase is not running when I have these problems.
Is there an ini file which is loading these DLLs? In that case, maybe I can edit out reference to this specific DLL. Alternatively, is Premiere Elements looking at any particular folder on my drive (or maybe even the whole drive?) to see if it can find any audio/video plugins, and then attempting to load them?
I'd be grateful of any ideas or workrounds you can come up with - I really want to buy this product. but currently I can't even get it to run.......
Thanks

Hi,
It seems that the way to do this is to temporarily rename my Audio .dll folder, for me this was the VST Plugins folder within Cubase. (BTW thanks for the advice, Steve - you mentioned renaming) and then when running PE, hold down <SHIFT> over the start-up screen (and keep it held during the new project selection and the initialisation screen) . This clears the cache of it list of available dll.s and so it scans again, obviously not finding the re-named folder. This list is now saved and will be untouched unless you run with <SHIFT> held down again.
After closing PE, it is safe to revert back to the original dll. folder name, and everything should run well after that.
However, I also agree that Premiere has no business poking around in my Audio Workstation files - why does it need these?

Premiere Elements 13 - No sound effects

I have no sound effects in the sound-tab. The "effects" is greyed out.
However, I do have some soundtracks. All I think.
Anyone knows why and how to get the effects?

yeppeyump
What computer operating system is involved?
How long ago did you install Premiere Elements 13? And, did you do it with antivirus and firewall(s) disabled?
If you are within 12 hours of install, then give the Sound Effects more time to appear within the opened project.
There have several reports of a significant delay between the finish of program install and the appearance of the Sound
Effects under the Audio Tab of the workspaces.
What is grayed out? You are not talking about fx Effects. Right? Do you see the Sound Effects Tab pointed to in the
screenshot, but it is grayed out? How would you describe the speed of your Internet connection?
Please review and then we will decide what next.
Thank you.
ATR

Photoshop Elements 12 or Premiere Elements 12 closes a second after opening program.

Hi,
I got Photoshop Elements and Premiere Elements 12 as part of a bundle with a printer (Canon MG6620). I installed it and put in the serial numbers as provided.
I click on Adobe Photoshop Elements 12 in my start menu, I get the start-up window that has the 'Organizer' button and the 'Photo Editor' button and when I click on the Photo Editor button, the program opens up and immediately closes with no error message. I can repeat this several times with no change.
Things I've tried so far
Updated Photoshop Elements and Premiere Elements 12 using Adobe update manager. No change
Used Compatibility mode for Vista, Windows server 2008. No change
Uninstalled and re-installed PE 12. No change
No entry logged in Event Viewer.
My PC
OS
       Windows 7 Professional 64-bit SP1
CPU
       Intel Core i7 3770K @ 3.50GHz 38 °C
       Ivy Bridge 22nm Technology
RAM
      16.0GB Dual-Channel DDR3 @ 802MHz (11-11-11-28)
Motherboard
       ASUSTeK COMPUTER INC. SABERTOOTH Z77 (LGA1155) 29 °C
Graphics
       ASUS PB278 (2560x1440@59Hz)
       ASUS PB278 (2560x1440@59Hz)
       4095MB NVIDIA GeForce GTX 680 (EVGA) 38 °C
Storage
       238GB OCZ-VERTEX4 (SSD)
       465GB Seagate ST500DM002-1BD142 (SATA) 30 °C
       1397GB Western Digital WD My Book USB Device (USB (SATA)) 47 °C
Optical Drives
       HL-DT-ST DVDRAM GH22NS50
Audio
       Realtek High Definition Audio
Any advice on this?
Thanks.

yes, that's exactly what you should do,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Premiere Elements 9 Lose Motion Effects after Share

Similar Messages

Maybe you are looking for