Premiere elements 9 trial problems

Ok, so I downloaded the trial for premiere elements 9 about a week ago, and realised I had to update my graphics drivers for my Nvidea GeForce GT220 graphics card. Basically it told me the drivers were uncompatable and should be updated.
I did so, and I'm now running the newest driver 260.99.
I however, still get the message telling me to update the driver. The preview and playaback sectiosn do nto show an image and are isntead constantly frozen when in the editor, and all around it's generally slow.
I've checked my system and I meet all the minimum requirements, yet, it still says the driver is out of date. I really need help to fix this problem as I now only have about 23 days left of the trial.
Did anybody else get this? And if so how was it fixed?
~Yeximus

Welcome to the forum.
There are several threads on the "baddrivers.txt" file, and users getting the error message, even after updating their video driver. After the update of the driver, removing that bad drivers text file, and re-booting has fixed things. Some users have had difficulty finding that TXT file on their systems, to delete it. A Search of this forum for "baddriver.txt" (without the "s) should yield several threads, and in a few, the users have given the exact Path to the file on their systems. This FAQ Entry also addresses this issue.
Also, on the upper section of the main forum page, there is a sticky (changes between two messages) and it shows what is disabled in the trial version.
Hope that this helps,
Hunt

Similar Messages

Open project in premiere elements trial problem.

Unload the trial of photoshop and premiere elementens, the photoshop works correctly, but the premiere .. only the organizer works, when I try to open project or new project the program is closed automatic .....(window xp).gracias! (the proyect save correctly, buy not open after)

Thank you very much Bill, these is the information of the card, I believe that probably this one expired, your diras ... thank you again!
NVIDEA GeForce 8600 GP
Fabricante:.........................NVIDEA
Tipo de dispositivo:............Adaptadores de pantalla
Ubicacion:.........................Ranura PCI 16 (Bus PCI 1, dispositivo 0, función 0)
Version:...........................1.0.0.35
Proovedor del controlador:NVIDEA
Fecha del controlador:27-08-2007
Version del controlador:6.14.11.6230
Firmante digital:Microsoft Windows Hardware Compatibility Publ
Date: Thu, 9 Aug 2012 14:06:33 -0600
From: [email protected]
To: [email protected]
Subject: Open project in premiere elements trial problem.
    Re: Open project in premiere elements trial problem.
    created by Bill Hunt in Premiere Elements - View the full discussion
Can you tell us all about your computer, and especially your computer's graphics card/chip? What is its make/model? What is the version and date of the installed video driver? When PSE runs, but PrE does not, it is usually an issue with the video driver being obsolete. Good luck, Hunt
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4610620#4610620
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4610620#4610620. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Adobe Premiere Elements Trial Installation Problem

When I try to install the Premiere Elements trial, I keep getting the message, "Sorry an error has occurred. The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author."
Please help!
Thank you,
Danna

Download agfain using a suitable browser like Firefox and using this method:
Direct Download Links for Adobe Software

PrE 12. How to deal with black screen "Created with Adobe Premiere Elements trial version"?

I'm really considering purchasing PrE 12 and would like to try it out. (I have another video editing software and would like to try this one.)
When I add video, I get a black screen "Created with Adobe Premiere Elements trial version". When I hit play, I can hear audio, but I don't get any video (just the black screen). Is there a work around, a setting that I can change, or is the trial version supposed to show the black screen?
Thanks,

To help with troubleshooting, some questions so people have more to work with
More information needed for someone to help... please click below and provide the requested information
-Premiere Elements FAQ http://forums.adobe.com/thread/1042180
And, exactly what are you editing?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Adobe premiere elements trial version

in my adobe premiere elements the text 'premiere elements trial version' stays in the videodisplay, how can I remove this?

marrithoekstra
Just in case notes that may sometimes get overlooked.....
1. After purchase of the Premiere Elements, you can remove the Adobe watermark from a project file (project.prel) that you created during the tryout. But, you cannot remove the Adobe watermark that exists in one of the exports from the tryout project.prel file (even after you get a purchased serial number and are working from the purchased program).
a. The classical answer to getting rid of the Adobe watermark from your tryout project.prel files after you purchase the product is to delete the rendered files of the trial project.prel which is opened in the purchased program.
b. However, I and others have found the often just opening the trial project.prel into the purchased program removes the Adobe watermark automatically with no need to delete any rendered files.
See what works for you. Please let us know the outcome.
Thank you.
ATR

Premiere Elements 13 , Problems with new text/titles

Premiere Elements 13, bisher keine Probleme. Nachdem die Filmlänge etwa 15 Minuten beträgt immer größere Probleme Titel/texte einzugeben. Wartezeiten sind extrem lange oder Programm stürzt ganz ab.

High ATR,
Computer running on Widows 7 ,64 Bit System, Service Pack 1, Processor AMD Phenom(tm) X4 945 3.00 Ghz;RAM 8 GB
Grafikkarte: NVIDIA GeForce 8800 GT
If the video on the timeline is longer than 10 minutes the problem will be remarkable. The response times adding a title is getting longer(2-15 seconds).
As the video is now 18 minutes the response time is after each action(resizing of letters or any changes of the text) up to 30 seconds or the program crashes completely.
Project settings are the following:
General HD 1080i; 29,97frames/second; Video:1920v 1080 H, 30 fps
Video: maximale Bittiefe, Dateiformat i-frame only mpeg, Kompressor MPRG i-Frame, Standbilder optimieren
The video is a mixture of full HD videos 1920x 1080 .mov and pictures up to 4608x3456 pixels.
When the program crashes I remarked that the main memory RAM(8Gb) was fully used by the premiere program. Might there be a problem?
Thank you for your service.
thomasd
Von: A.T. Romano
Gesendet: Sonntag, 1. Februar 2015 23:55
An: Thomas Deschler
Betreff: Premiere Elements 13 , Problems with new text/titles
Premiere Elements 13 , Problems with new text/titles
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <https://forums.adobe.com/message/7151822#7151822>

Premiere elements trial download problems

I seem to have downloaded adobe premiere elements 10 but I can't extract it? I keep getting this "invalid checksum" pop-up.

If the download is completed in the Adobe Download Assistant you can temporarily turn off the feature to verify the checksum. The following steps will allow you to temporarily disable this feature:
Open the Disk Utility located in Applications/Utilities
Go under the Disk Utility menu and select preferences
Deselect the option to verify checksums
Try mounting your DMG file
I would recommend turning this feature back on though after the installation is complete. Also if you notice this happening on additional files it can indicate a problem with your Internet connection.

Downloading photoshop and premiere elements trial- I'm having problems?

I am needing help downloading the trial of photoshop + premiere elements?
I've tried for 2 days now. The installer looks complete.
message read: PhotoshopElements_13_WWEFDJ-2.dmg
What do I do now?

double click that dmg file.

Premiere Elements 12 Problems ... still quite buggy?

Hi all,
I used Premiere Elements 11 up to now. Currently testing Version 12 - which appears to be quite buggy to me... Now I just wanted to make sure that it's not me being too dump to find the correct settings...
BTW: I'm using a MacBook w/ Retina from 2012 and most current OS X Maverics as well as a freshly updated APE 12 Testversion (...with German Language)...
1. ...and most anoying one: scrolling in the Timeline left and right on (Apple Magic-)Mouse works now just the other way round than in APE 11 (...which was quite intuitive to me... :-( ) ...I've found some settings for the keyboard, but nothing regarding mouse wheel scroll direction. BTW: is it possible to use up and down scrolling to pan up and down the video-tracks instead of moving back and forth in the timeline (...again).
2. Most interesting new feature of V 12 is the motion tracking (at least for me):
a) I can only use motion tracking with those childish graphics and animation. I just want to use it for simple text as the help message suggests should be possible as well. But the button to place texts is disabled when motion tracking is enabled... is there another way to enable motion tracking on a existing text-and/or-graphic-overlay?
b) I have a lot of videos filmed with a GoPro in upside-down-mode, meaning that I have to rotate the videos by 180 degree in Premiere. Motion tracking appears not to be able to handle that. While objects can be tracked (which is also not too easy as i had to find out) the motion track seems to be way more suitable for the non-rotated video... I've found no way, yet to rotate the track as well (without roating the graphic as well).
So... unfortunately Version 12 is a bit frustrating up to now... Thanks for your help!
Losty

Sorry for your challenges, Losty. I'm having great success with version 12!
Of course, Mac Retina displays are known for causing problems like the ones you're experiencing. I'd hoped Mac would have fixed this by now.
You can certainly use your own text, graphic or even a picture-in-picture with Motion Tracking. I demonstrate how in tutorial on the left side of this page. http://Muvipix.com/pe12.php
As for 2b, I have no idea why you're shooting your videos upside-down, but you certainly are adding an unnecessary level of complexity to your post production. I'd recommend that you first right-side-up your videos in Premiere Elements and then output the finished video using Publish & Share/Computer/AVCHD with the M2T 1920x1080 preset to output the fixed video. You can then use your righted videos in a new project and do all the Motion Tracking you want with it.

Adobe premiere elements trial download link not working

can anyone download the trial version? the golden yellow download button is frozen whenever I try to download premiere elements,
http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=en_us

actually, note to other downloaders, when this screen below pops up,
click the link at the top of the pop up downloader to install Akamai downloader,reads : dont see the installer? try reopening it ( you click that link in the download pop up
I was only able to download 252mb of a 1.2 gig file, then had to restart the download the next day because I had used the direct links for file 1 and 2 at the bottom of that initial pop up as can be seen by the two download windows to its right, if you need to resume your download because of lost internet connection or time reasons you`ll have to start again,,
however once akamai has installed automatically, or you downloaded and installed manually, you`ll get this download window when you attempt downloading premiere elements 8 (or any other adobe software).
once the download is complete a golden yellow tab will read "install now" in the akamai downloader window,
unfortunately for me I received the following error on installation, even if trying to install to different folder I get the same error,
trying to manually open the file gets me this error
so far this has been a breeze,
using win7 64bit. quadcore. HP pavillion laptop. shouldn`t matter

Premiere Elements cause problems with Windows Media Center while streaming to TV.

I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

Error while installing Premiere Elements (trial)

Dear all,
For my study I need to use Adobe Premiere Elements. A few days ago I decided to download it through the Adobe installer. All worked well, the setup started successful as well. But when it reaches the 'shared technologies' part, it displays an error. The error does not state the shared technologies is the problem, but as I have tried six times by now and it always crashes at that point, I am pretty sure this is the problem.
As I said, I have tried installing it several times by now, turned the computer off and on several times, changed the OOBE folder, tried to install Pr. Ele. on a guest account on my computer.
I have read the forum thoroughly but unfortunately to no use. I really, really hope someone can help because I do need to use this program and I cannot think of something I did wrong with downloading/ installing.
Some specifications of my pc:
- Acer Aspire
- Windows 7
- own CS6

AstridE,
Thank you for the follow-up, and sorry that the installation is still causing problems.
Maybe a step back would be worth a look. This article is a general "checklist" for installing most Adobe software. Please take a look at it, to see if you have perhaps missed something along the way: http://forums.adobe.com/message/3419692#3419692
There can be several factors, that can cause an installation to fail, such as having anti-virus, anti-malware, etc., running, during the installation. This is exacerbated with the newer active, real-time-scanning anti-virus/malware programs. They should be turned OFF, for the installation.
Good luck, and please report on your progress.
Hunt

Premiere Elements installation problem.

Hi.
My name is Martin. I have recently upgraded laptops to a MacBook Pro, and the package Adobe Photoshop with Premiere Elements 10 will not install properly on my new laptop. Photoshop installed with no problems whereas Premiere Elements will not. I have tried several occasions, with no success. The serial numbers are correct as well as system requirments, so will appreciate any advice.
Many thanks.

Hi Jeff, It comes up with the following:
Exit Code: 7
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DS013, DW006 ... WARNING: DS013, DW016 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s), 8 warning(s)
WARNING: DS013: Payload {AA0D312F-1570-4E7E-9A7D-E191E0090FEC} AdobeHelp 4.0.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
ERROR: DS013: Verifying payload integrity : Failed with code 1
WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Smartsound3: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 10: Install failed
ERROR: DW050: - Smartsound1: Install failed
ERROR: DW050: - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Elements 10_LangPacken_US: Install failed
ERROR: DW050: - Smartsound2: Install failed

Installing 32 bit Premiere Elements 12 problems

I purchased my upgrades to Elements and Premiere 12 today. They downloaded just fine. Elements installed just fine.
Premiere downloaded and extracted just fine. The install however failed noting that I was trying to install the 64 bit version. I clearly extracted the file labele 32bit.
I even deleted the files, downloaded again, extracted again and...same result.
Anyone else have this problem?
How to resolve?

Tasarsailor
This sounds like an issue for Adobe. But first, did you purchase Premiere Elements 12 from Adobe? Is your 32 bit operating system Windows or Mac?
Please use the following link to contact Adobe Chat who will resolve your issue or direct you to the department that will.
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=downloading-installing -and-setting-up
When the above link opens, click on "I still need help" in order to bring up the Adobe Chat pop up. I have pre-set the topic for "Downloading, Installing, and Setting Up".
I believe that will get you a quick resolution to your issue unless you have another contact with Adobe that you obtained during the purchase transaction.
Please let us know the outcome.
Thanks.
ATR

Premiere elements 8 problem

my class got premiere elements 8 on our computers and we cant use it when ever we add video to the time line or anything in the preveiw they dont show corectly but our computer should run it corectly and we dont have nivida cards and idea on what the problem is?

Welcome to the forum.
For starters, we'll need much more info. This ARTICLE will give you an idea of the type of info necessary.
Also, aspects, such as networking, and also how users are logging in, can be very important. More detail will be be better.
Good luck,
Hunt

Premiere Elements 13 problem with DVD menu templates

I recently purchased Premiere Elements 13 for my iMac. It crashes every time I attempt to add a DVD menu template to my project. Does anyone have a solution for this problem?

I just uninstalled and then re-installed Premiere Elements. When I opened the program, I clicked on Movie Menus from the Tools menu. There were blue bands on the menu thumbnails and I right-clicked on one and selected "download all." P.E. let me know that the files would need 2.5 GB of space and I told it to go ahead and download the files. The download was going fine and it downloaded all 2.5 GB of data. I could see the blue bands disappear from the thumbnails as the download progressed. When the downloading process was over the progress window disappeared. I saw the rainbow colored pinwheel spin around for several seconds and then the program crashed. The next thing I saw was a "Crash Report" with several lines of "computerese" and the message that it would be sent to Apple. I clicked OK and in a second or two a window from Adobe appeared asking me if I wanted to restart the program and send the crash report to Adobe. There was also an option for me to ask Adobe to send me feedback or tips for a workaround or solution to the problem and what came back was the message that Adobe had no workaround or solution to my problem. For each of the previous times the program crashed, I have seen all of these windows that I just described.
One other thing: when I re-opened Premiere Elements after the crash, I looked at the movie menu thumbnails and the blue bands were not there any more. So it seems as though Premiere Elements "thinks" they have been downloaded. If so, where are they and how do I use them? And how do I prevent the program from crashing?
Feel free to ask me any questions you want to, especially if they will help solve this problem. One reason I bought this program is that I want to make DVDs with menus and chapter selection buttons. I have been using iDVD, but Apple no longer supports it, and it does have a few bugs I have had to work around. I also have DVD Studio Pro, which came with Final Cut Studio a few years ago (before Final Cut Pro X) but it is not very user friendly. I also have Final Cut Pro X, which has the option of authoring DVDs, but doesn't have the DVD menu template options that are in iDVD and DVD Studio Pro.
Thanks for your attention and help.
bha51

Premiere elements 9 trial problems

Similar Messages

Maybe you are looking for