Premiere Elements doesn't see my Siig USB capture device.

The topic heading pretty much say's it all. My webcam shows up as a capture device, but not my Siig. I don't remember the model of the Siig and it's not printed on the device, but it was cheap ($29). However, the crappy capture software that came with it sees it fine, as does Windows Media Encoder. So, why not Premiere Elements?

"Premiere Elements doesn't capture video over a USB connection"
I'm a bit surprised by that, but it would perfectly explain what I'm experiencing. Thanks.

Similar Messages

Fmle TURN OFF WHEN I CHOOSE USB CAPTURE DEVICE

USING WINDOWS 7 64 BIT SOFTWARE when i turn on fmle it comes on and uses the built in webcam on the computer but when i switch to the usb capture device it turns off. ANY ONE KNOW HOT TO FIX THIS

Gen2ly wrote:
This is the rule I think eldragon is talking about:
http://wiki.archlinux.org/index.php/Syn … _detection
if it is, it doesn't work for me anymore either. Not sure why.
I did it before posted there. Any ideas?

USB capture device?

I've been looking for a usb capture device with either component or hdmi inputs and outputs a 16:9 aspect ration for my macbook and haven't found anything... anybody know of anything???

Was just looking for the same thing, I just need to capture from component. Found this from Blackmagic Design,
http://www.bhphotovideo.com/bnh/controller/home?O=cart&A=details&Q=&sku=558914&i s=REG
Hope it helps!

I can't get premiere elements 11 to see my usb microphone?

Hi I need help! I can't do narration as my program is not seeing my mic. Any suggestions?

softhackle2
USB microphones are typically not supported by Premiere Elements (any version).
A recent thread here on Premiere Elements and USB microphone.
http://forums.adobe.com/message/5292426
If you have access to a microphone which connects via a computer jack, please use that for your narrations from within Premiere Elements.
Do you have the same issue if you create your narrations in the free audio editor Audacity and then import those narrations into the Premiere Elements project with its Add Media/Files and Folder to get it into Project Assets and from there to the Narration Track (Expert view)?
ATR

Updated Windows to 8.1 and now Premiere Elements does not see my Panasonic video camera as source

Is anyone else having issues due to the updated Windows 8.1? I have a panasonic digital video mini casset camera that worked fine using a USB cable to upload video. Now the program will not see the camera as a source. Using a firewire is not an option and was not an issue in the past.

>new to premier
The Tutorial Links Page http://forums.adobe.com/thread/1275830 may also help
Plus...
Premiere Elements FAQ List (2 pages of FAQ as of September 2013) http://forums.adobe.com/community/premiere_elements/premiere_elements_faq?view=all
Premiere Elements TIPS List (6 pages of Tips as of September 2013) http://forums.adobe.com/community/premiere_elements/premiere_elements_tips?view=all

I have photo's in a folder but elements doesn't see them.

I have tried to import the folder's files but no luck, still doesn't see them. I have tried to; Show hidden files, Reconnect, All Missing files, Untagged Items, all with no luck. Any Ideas

Hi,
Which operating system are you running on?
Which version of Photoshop Elements are you using?
What error message are you seeing when you try to import them - file not supported or already in catalog?
What type of file - raw? If raw, which camera produced them (Make & model)?
To see if the file is already in the catalog, go to the Find menu and select By Filename. Enter part of a file name that you are trying to import and see if it can find it.
Go to the View menu, select Media Types and ensure they are all checked.
Are you seeing the photos in other folders ok?
Brian

HDMI USB capture device

Does anyone know which USB HDMI capture devices are supported with Skype? I have already learned that a device needs a UVC driver for it to work. (USB video class) but most products dont have this information in their spec sheet. I already mailed Elgato about their HDMI USB capture products and they responded that the video can only be pulled into their application and other applications such as Skype would not detect it as a video source. Does anyone have a confirmed solution? It needs to be a USB solution so internal capture cards are not an option. And I cant exactly go buying stuff left and right and returning it before finding something that works. Greetings,

Was just looking for the same thing, I just need to capture from component. Found this from Blackmagic Design,
http://www.bhphotovideo.com/bnh/controller/home?O=cart&A=details&Q=&sku=558914&i s=REG
Hope it helps!

Time capsule doesn't see printer through USB hub

I can't seem to get the TC to see my USB printer if it connects through a hub. I have an external drive plugged into the hub and I can plug it into any of the ports and the TC log file shows the disk plug in and unplug. The disk works great.
So far, the only way I've been able to print via the TC, is to connect the USB cable direct to the TC. But there's no indication in the AirPort utility that the printer even exists. Using System Preferences printer setup, I'm able to see the printer, add it and print a test page. At no time did the AirPort utility indicate that the printer was indeed attached to the Time Capsule and functioning correctly.
How do I get the AirPort to give me more log information? I can't believe that I'm able to print via the TC, yet the printers pane is empty, and nothing in the system log.
After doing this test, I again tried using the hub, and the printer is no longer visible on the Mac, but the disk on the hub is there. I unplug the hub and plug the printer direct, and it's again visible on the Mac. At no time does the TC indicate that the printer exists.
I do Linux system admin all day and bought a mac because it runs Unix for command line, and is supposed to be a "no brainer" to manage - a big plus as I really don't want to bring my work home and just use the computer. Sigh....
Macbook is running 10.7.2
Time Capsule is a new 2T unit
Printer is Canon iP4300

The thing that really bothers me is that when I connect the printer direct to the TC, the Mac sees it, but not the Time Capsule... ***?!?
Resetting the print system may...or may not....help here.
See the last step in this Apple Support Document
http://support.apple.com/kb/TS1253
You are power cycling the entire network after you make a change in the USB connections, correct?
A powered USB hub will run $15-20 or so. Highly recommended.

Macbook pro doesn't see lexor 16gb usb memory stick. (Windows PC does see it)

Heading says it all. I'm baffled. Windows PC sees the memory stick but my MacBook Pro doesn't.
Plese help.
TJ

Mac's are very very particular about the Ram they use. Mac's historiclly only seem to like top of the line when it comes to Ram.
http://www.crucial.com
or
http://eshop.macsales.com/shop/apple/memory/
Both of these are considered the top of the line in Ram.
I have been in computers since 90 and I am not at all familiar with Lexor Ram

USB Capture device driver

Hi,
I have written a user space USB driver for our Enciris LT101 video capture board using libusb.
Now I want to make the device appear in Video Device list and access it through quicktime. Is it possible to write a "virtual driver" using quicktime component or any other mechanism to make the device appear in video device list?
PS: I did the same under windows writing a directshow source filter and hacking the interfaces in the right way so that the device appears as if I have used AVStream kernel mode driver.
Thanks, Malik

Thanks for feedback,
That is already a start. I am indeed searching of keywords like "Sequence Grabber".
Do you know if I can grab already compressed video with that interface?
Is there another way to enumerate and present devices in QuickTime available "device list" that will also work for 64 bit?
I heard about macam driver...

Freeze issue in Premiere Elements 3

Hi,
We are trying to solve an issue with Premiere Elements 3 for a customer.
Yes, I know it a very old version, but it is just a home user & it has been working fine for him. He last used it several months ago with the same hardware & all worked fine.
Now when he goes to use it again it basically freezes up. If you turn the camera on it pops up asking the application to use. If you select Premiere Elements it opens up the window with "capture device offline" & doesn't seem to respond to any mouse clicks. If you go to task manager & end the task (often get a message Premiere is not responding), go into Windows Movie Maker this works fine - you can even control the camera (start, stop, etc).
If you start Premiere with the camera turned off you can seem to navigate around menus, etc no problem (until you turn the camer on & try to capture).
Consequently I assume that the hardware is OK. Because Premiere Elements worked before I presume that maybe an update or some new application is stopping it from working, but I'm not sure what it is.
Here is a summary of the system specs:
Win XP Home SP2
Premiere Elements V3.0
Sony DCR-HC96 (also tried their old Sony DCR-TRV355E but this gives the same symptoms)
Firewire (onboard Asus P5N-E motherboard)
Any thoughts would be greatly appeciated.
Gary.
Perth, Australia.

Hi Bill,
Thanks for your assistance.
I tried all of the items you mentioned, but it still gives the same result.
Interestingly once it freezes if I go to task manager & End Program (the only way to close it) I can go straight to Windows Movie Maker & it works perfectly - I can even control the play, stop, etc.
Whilst this sort of proves it isn't hardware, I had a spare firewire card so I disabled the onboard card & put in the new card - but the problem is still the same.
The next thing I have tried is to install the trial of Premiere Elements 9 (the customer is happy to buy this if it solves the problem), but the symptoms are basically the same. With the camera turned off, the software seems to work well & I can go in & out of all the menus. Once I turn the camera on, the device appears in the pull down list (something like MS DV ...) but none of the buttons (eg play, etc) work & it sort of freezes up & task manager says its not responding.
Any ideas would be appreciated.
Gary.

Serial # doesn't work Premiere Elements 12

Just bought the product can't install
Got the numbers and installed Adopbe photoshop elements 12 but the serical # for Premiere Elements doesn't work

Also, Elements programs are not part of the Cloud, and they each have a forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
http://forums.adobe.com/community/premiere_elements/content

Premiere Elements 11 stops importing from DV

Premiere Elements 11, Windows 8 32, External USB-HD
Hi,
I am trying to convert my friends' MiniDV videos. I work with a borrowed laptop that has Elements on it but I am not familiar with it. The import always stops after about 18:30 and I get an error message about filesize. The filesize is about 4GB. I vaguely remember some Windows restriction (from the old days). Could that be the reason? And how and where do I change that?
Another question: Is there a way to stop Elements from breaking the video into scenes? All my friends what is to transfer the videos to the harddisk. No fancy transitions, themes etc.
Thanks.

Hans
The good news is that you were able to capture your DV data with Windows Movie Maker if not Premiere Elements.
Since that is the case, I do not know if you have any more time or want to do any further troubleshooting on DV data capture firewire into Premiere Elements Capture Window.
If you should, we might revisit a lot of what we did and then more.
a. Scratch Disks. Especially the Captured Video and Audio, but also any preview files or conformed video and audio files pile ups. Have you checked the Adobe Premiere Elements Preview Files Folder and Media Cache Folder? Has your computer been defragmented lately.
b. General computer optimization with a product such as ccleaner (regular and registry components).
c. In general for runtime error
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
There is a Premiere Elements 11 preference file named Adobe Premiere Elements Prefs. On Windows 7, 8, and 8.1 64 bit it can be found in the path
Local Disc C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
11.0
and in the 11.0 Folder is the Adobe Premiere Elements Prefs file that you delete. Work with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the path.
But, if you are working in Windows 8 32 bit, I am not sure where that would be...guess is
Local Disc C
Documents and Settings
Owner
Application Data
Adobe
Premiere Elements
11.0
and in the 11.0 Folder would be the Adobe Premiere Elements Prefs file that you delete. Again, work with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the path....just in case.
Thanks you for all your follow ups. Continued success with your projects.
ATR

Can I reinstall premiere elements 10 with same key

Hello,
the monitor of premiere elements doesn't work anymore.
can i reinstall the program with the same key?

yes.
deactivate it (help>deactivate) on the computer where it doesn't work. if you're unable to deactivate, you can contact adobe support via chat and reset your activation count, Contact Customer Care
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.4 (win) 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Why on Premiere Elements 9 for Mac Unexpectly Quits when previewing edit?

Former Dell Windows XP PC user with new MacBook Pro OS X 10.6.5 with 2.53 GHz Intel iCore 5
Using Adobe Premiere Elements 9 for the Mac.
Experience: Premiere Elements 2, 4, 6, 7 on Windows based PC
First video editing experience on MacBook Pro using PSE9 so far consisting of 3 still pictures with titles and transitions.
The 3 still photos ran fine with no titles and no fades and no transitions.
When I add a title wth a fade in OR add a transition between photo clips and try to preview the edit without rendering the work area, The application suddenly quits with the message (see attached error message photo): Adobe Premiere Elements 9 quit unespectedly.
The Problem details and System Configuration runs hundreds of lines.
When I click the Reopen button, it doesn't work -- all I get is a white screen.
When I click OK, I get a Crash Report for Adobe Premiere Elements 9 window (see attached error message photo)
If I render the work area before previewing, the "unexpected quit" problem goes away. So that is a solution but it is a "work around" solution.
Attempts to solve problem:
Contacted Adobe support person via telephone named Jolly in India. He connected to my computer so that he could see my screen. His solution was to download an available update for APSE9 and the first Preview run worked flawlessly. So we hung up the phone.
Then I did one "cross disolve" transition and Bing !! ASPE9 unexpectedly quit !!
Any ideas at all? NOTE: This 70 yr old "didn't grow up with computers" is still on learning curve for using the Mac.
Thanks in advance, David (DRthiess)

Thank you Bill H. and Steve G. for your prompt reply and suggestions.
Bill, I started this project of editing the video from my son's, (the coach) boy's team winning the state Cross-Country championship back on Monday (now Thursday 12/2) with the intent of having it finished by the time I see him on Sat. I'm running out of time to do extensive research and will have to use my "work arounds" the problem, namely rendering the work area before previewing an EDIT (and maybe even "sharing" small segments as a .mov file to my hard drive without previewing and then putting the segments together and later researching a fix.
Note Bill that when APrE9 first quits, I do get "details" that run hundreds of lines -- which mean nothing to this 70 yr. old mind. I do submit reports into, is it APPLE? or is it ADOBE? that gets the reports. And what does the "receiver" do with the reports anyway?
Steve. The camera is a Sony DV camcorder (tape) but I haven't gotten to the video yet. I started the video editing with 3 jpeg still photo and was trying to overlay them with titles with some fade in's and fade out's and Cross dissolve transitions. So I haven't even dragged the action video to the time line yet.
NOTE: I have installed Parallels 6 and Windows 7 on my Mac and my Adobe premiere elements 9 (just purchased) came with both a Mac installation DVD and a Windows installation DVD. The Adobe tech support said that I could try the Windows version when Windows 7 is up and running on my computer but that Adobe would not support that platform because as he said: Window 7 on the Mac doesn't operate the same as Windows 7 on a PC. News to me as I thought that by installing Windows 7 on my Mac, I would get the identical Windows environment with no conflicts. Perhaps I was expecting too much.
Thanks again. I'll report back when I get it solved or if I need more help.
David

Premiere Elements doesn't see my Siig USB capture device.

Similar Messages

Maybe you are looking for