Premiere Elements - Error 2048 couldn't open file......Question

Windows 8.1
6 gigs of ram
I get the following error when I attempt to open a created file for viewing.
"Error- 2048: Couldn't open file.....not a file Quicktime understands.
I am creating the file in the default NTSC 720 format. I get the same message with trying to wide screen format.
This error seems new as it did not use to happen.
Can someone explain how to correct this error. In researching the problem I came across:
1. trying third party repair software (which doesn't seem to solve the problem.)
2. that the error refers to an error with the movie rendering (as opposed to the audio.)
Been working on this for four hours. Any help is certainly appreciated. Thanks.
- Craig

Craig
What version of Premiere Elements on your Windows 8.1 (assumed 64 bit)? For now I will assume 11, 12, or 13.NT
Please confirm that your export setting from Premiere Elements were
Publish+Share
Computer
QuickTime
with Presets = NTSC DV 16:9
and that you did not customize the settings, just hit save to get your widescreen DV.mov export.
That export should be fully playable with the latest version of QuickTime.
If you confirm that QuickTime player is rejecting it with your error 2048, then uninstall and install QuickTime
with the antivirus and firewall(s) disabled.
a. Try to open the existing DV.mov again in QuickTime
and
b. Create a new DV.mov in Premiere Elements and try to open it in QuickTime.
What are the results from a and b?
We will be watching for your progress.
Thank you.
ATR

Similar Messages

PDF Generation Error Message:Couldn't open File while generating PDF from a Frame (7.2 Version) book

Hi,
I'm trying to convert a book into PDF and I get the error message Couldn't open a file (... <filename>.fm) and the unavailable Fonts dialog box also appears. The tricky thing is I've converted the same book into PDF just a couple of days ago. Now when I tried to do it again, I get the above mentioned error message. I tried unselecting the File > Prefrences > General > Remember Missing Fonts checkbox too. However, it didn't help in generating the PDF. I will be thankful if anyone suggests a suitable workaround for this issue. Thanks in advance.

Usually, deselecting Remember missing fonts works.
The missing fonts message displays when you or FrameMaker opens the file. The workaround is to open all the files in the book, or at least those with the "missing" font, clearing the message for each file. Now print the book to PDF, while keeping the files open. This usually works because you have already cleared any missing fonts messages.

Error: the document could not be open. Couldn't open file. It may becorrupt

Have a MacBook Pro/ OSX ver 10.4.11/Tiger/Use Entorage for my email which is imap and get an error everytime i open or save an attachment in my email.
Couldn't open file. It may be corrupt or a file format that preview doesn't recognize"

I am unable to open attachments now that I am receiving my email on an
IMAP server. The same attachments can be opened if I email to an
account using a POP server.

Preview File error - couldn't open File

I have started getting a number of error messages when I try to open some PDF files with Preview. I've received all the troublesome files by email (Mail). I get the message:
File error. Couldn't open the file.
I've tried repairing permissions etc., but the problem seems recurrent, affecting about 1/4 of the PDF files I receive.
I've just tried downloading Acrobat Reader, and that can't open the files, either. However, PC users say they can open their copies.

The only solution to corrupted files is to restore from your back up.
Regards
TD

(JE 3.2.44) Couldn't open file

Hello!
We recently upgraded to newer version of BDB JE, and failed with random, but weird issue:
17/Oct/2007 04:49:38 ERROR [pool-97-thread-2] - com.sleepycat.je.DatabaseException: (JE 3.2.44) Database r
elations_database14269 id=26 rootLsn=0xffffffff/0xffffffff IN type=DBIN/2 id=29976291 not expected on INL
ist
com.sleepycat.je.DatabaseException: (JE 3.2.44) Database relations_database14269 id=26 rootLsn=0xffffffff/
0xffffffff IN type=DBIN/2 id=29976291 not expected on INList
        at com.sleepycat.je.evictor.Evictor.selectIN(Evictor.java:511)
        at com.sleepycat.je.evictor.Evictor.evictBatch(Evictor.java:354)
        at com.sleepycat.je.evictor.Evictor.doEvict(Evictor.java:249)
        at com.sleepycat.je.evictor.Evictor.doCriticalEviction(Evictor.java:274)
        at com.sleepycat.je.dbi.CursorImpl.close(CursorImpl.java:684)
        at com.sleepycat.je.Cursor.close(Cursor.java:262)
        at com.sleepycat.je.Cursor.close(Cursor.java:250)
        at com.sleepycat.je.Database.putInternal(Database.java:667)
        at com.sleepycat.je.Database.put(Database.java:609)
        at com.redwerk.webcrawler.storage.url.bdbje.BDBJEStorage.saveRelations(BDBJEStorage.java:361)
        at com.redwerk.webcrawler.storage.url.bdbje.BDBJEStorage.update(BDBJEStorage.java:396)
        at com.redwerk.webcrawler.storage.url.RetryHandlingStorageDecorator.update(RetryHandlingStorageDec
orator.java:159)
        at com.redwerk.webcrawler.storage.url.CountHandlingStorageDecorator.update(CountHandlingStorageDec
orator.java:86)
        at com.redwerk.webcrawler.filter.record.UrlProcessedFilter._accept(UrlProcessedFilter.java:34)
        at com.redwerk.webcrawler.filter.record.ChainedFilter.accept(ChainedFilter.java:23)
        at com.redwerk.webcrawler.filter.record.ChainedFilter.accept(ChainedFilter.java:25)
        at com.redwerk.webcrawler.Crawler.addRecord(Crawler.java:731)
        at com.redwerk.webcrawler.ConsumerThread.run(ConsumerThread.java:301)
        at edu.emory.mathcs.backport.java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:44
2)
        at edu.emory.mathcs.backport.java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:305)
        at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:135)
        at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.
java:990)
        at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:531)
        at java.lang.Thread.run(Thread.java:595)
17/Oct/2007 04:49:38 ERROR [pool-97-thread-4] - com.sleepycat.je.DatabaseException: (JE 3.2.44) fetchTarge
t of 0x1d3/0x472b30 parent IN=32738188 lastFullVersion=0x1d3/0x479cdc parent.getDirty()=true state=2 com.s
leepycat.je.log.LogFileNotFoundException: (JE 3.2.44) 0x1d3/0x472b30 (JE 3.2.44) Couldn't open file db/000
001d3.jdb: db/000001d3.jdb (No such file or directory)
com.sleepycat.je.DatabaseException: (JE 3.2.44) fetchTarget of 0x1d3/0x472b30 parent IN=32738188 lastFullV
ersion=0x1d3/0x479cdc parent.getDirty()=true state=2 com.sleepycat.je.log.LogFileNotFoundException: (JE 3.
2.44) 0x1d3/0x472b30 (JE 3.2.44) Couldn't open file db/000001d3.jdb: db/000001d3.jdb (No such file or dire
ctory)
        at com.sleepycat.je.tree.ChildReference.fetchTarget(ChildReference.java:143)
        at com.sleepycat.je.tree.DIN.getDupCountLN(DIN.java:147)
        at com.sleepycat.je.dbi.CursorImpl.lockDupCountLN(CursorImpl.java:2409)
        at com.sleepycat.je.tree.Tree.insertDuplicate(Tree.java:2703)
        at com.sleepycat.je.tree.Tree.insert(Tree.java:2652)
        at com.sleepycat.je.dbi.CursorImpl.putLN(CursorImpl.java:1004)
        at com.sleepycat.je.dbi.CursorImpl.put(CursorImpl.java:1027)
        at com.sleepycat.je.Cursor.putAllowPhantoms(Cursor.java:871)
        at com.sleepycat.je.Cursor.putNoNotify(Cursor.java:808)
        at com.sleepycat.je.Cursor.putInternal(Cursor.java:762)
        at com.sleepycat.je.Database.putInternal(Database.java:663)
        at com.sleepycat.je.Database.put(Database.java:609)
        at com.redwerk.webcrawler.storage.url.bdbje.BDBJEStorage.saveRelations(BDBJEStorage.java:361)
        at com.redwerk.webcrawler.storage.url.bdbje.BDBJEStorage.update(BDBJEStorage.java:396)
        at com.redwerk.webcrawler.storage.url.RetryHandlingStorageDecorator.update(RetryHandlingStorageDec
orator.java:159)
        at com.redwerk.webcrawler.storage.url.CountHandlingStorageDecorator.update(CountHandlingStorageDec
orator.java:86)
        at com.redwerk.webcrawler.filter.record.UrlProcessedFilter._accept(UrlProcessedFilter.java:34)
        at com.redwerk.webcrawler.filter.record.ChainedFilter.accept(ChainedFilter.java:23)
        at com.redwerk.webcrawler.filter.record.ChainedFilter.accept(ChainedFilter.java:25)
        at com.redwerk.webcrawler.filter.record.ChainedFilter.accept(ChainedFilter.java:25)
        at com.redwerk.webcrawler.Crawler.addRecord(Crawler.java:731)
        at com.redwerk.webcrawler.ConsumerThread.run(ConsumerThread.java:301)
        at edu.emory.mathcs.backport.java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:44
2)
        at edu.emory.mathcs.backport.java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:305)
        at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:135)
        at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.
java:990)
        at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:531)
        at java.lang.Thread.run(Thread.java:595)
Caused by: com.sleepycat.je.log.LogFileNotFoundException: (JE 3.2.44) 0x1d3/0x472b30 (JE 3.2.44) Couldn't
open file db/000001d3.jdb: db/000001d3.jdb (No such file or directory)
        at com.sleepycat.je.log.LogManager.getLogSource(LogManager.java:760)
        at com.sleepycat.je.log.LogManager.getLogEntry(LogManager.java:594)
        at com.sleepycat.je.log.LogManager.get(LogManager.java:735)
        at com.sleepycat.je.tree.ChildReference.fetchTarget(ChildReference.java:135)
        ... 27 moreWe checked our code and found we are not doing any removal of JE files at this stage (we had to implement removal of JE files BEFORE thread start to avoid cases when corrupted environment causes current task to not start, probably there's a better way? However this is definitely not a cause of the error, because removal is performed before environment is created)
The je.properties we're using is:
je.cleaner.threads=7
je.maxMemoryPercent=40
je.cleaner.deadlockRetry=7
#je.cleaner.minFileUtilization=20
je.cleaner.readSize=1048576
je.cleaner.lookAheadCacheSize=262144
#je.evictor.lruOnly=false
#je.evictor.nodesPerScan=100
je.log.faultReadSize=102400So the question is - is this is some bug in BDB JE, or we just missed things?

Hi Eugene,
We recently upgraded to newer version of BDB JE, and
failed with random, but weird issue:Were any of the log files for this environment created with an earlier version of JE? If so, what version?
Are you using DeferredWrite? There were bugs in earlier JE releases involving DeferredWrite and database removal/truncation and duplicates. I see from the information in your post that you are using database removal/truncation and duplicates.
We checked our code and found we are not doing any removal
of JE files at this stage (we had to implement
removal of JE files BEFORE thread start to avoid
cases when corrupted environment causes current task
to not start, probably there's a better way? However
this is definitely not a cause of the error, because
removal is performed before environment is created)I'm not sure I understand. Before opening an environment, if you wish to clear out all data in the environment directory and start from scratch, then the right thing to do is delete all the log files. If that's what you're doing, that's fine.
--mark

Error message: "Can't open file"

Using Keynote 3.0.x I try to open a keynote file created a year ago and when I try to open the "Opening" dialog comes up, you see the progress bar, and then, I get the error message, "Can’t open file" followed by the file name. Any recourse?
PowerMac G5 Mac OS X (10.4.7) FInal Cut Pro 5.1

I later discovered the file was damaged. Went back to a backup copy and things were fine. Good think we have backups.

Error 6 occured at open file+.vi:open file

Hi
Iam using lab view 7.1 licensed version.But when i create a stand alone application and install it in a 4gb touchpanel(ADVANTECH TPC 660G B1-E).iTS WORKING PERFECTLY FOR SOME TIME.But after some time i get an error (error 6 occured at open file+.vipen file).Iam attaching the snapshot
plz help me out
ekanth
Attachments:
untitled.JPG ‏55 KB

This indicates a problem with your code. Since you haven't shown us any code we can' tell you what the problem is. Are you trying to open a file that's open by another application? Are you trying to open a file that's on a network, and the network is temporarily unavailable? You should know what file it's trying to open - after all, you wrote the app, right?

Error 1 is to open file vi:. Openfile occurred - Fehler 1 ist bei Open File .vi:Open File aufgetreten

Hi there,
I'm using Labview 7.1 and Windows 7.
I built a VI and it ran perfectly yesterday. Today when I tried to run it, the following message appeared:
Fehler 1 ist bei Open File+.vipen File aufgetreten
Mögliche Gründe:
LabVIEW: Ein Ausgabeparameter ist ungültig.
NI-488: Befehl erfordert, daß der GPIB-Regler der aktive Regler ist.
Translation (google translator):
Error 1 is to open file vi:. Openfile occurred
Possible reasons for this:
LabVIEW: An input parameter is invalid.
NI 488: command requires that the GPIB controller is the active controller.
In the attachment I am sending the file. The file is very simple. I'm just importing some data from excel.
Regards
Solved!
Go to Solution.
Attachments:
Error.jpg ‏49 KB

Cottbus wrote:
I have the VI in a loop, because I want to make operations with a specific cell from Excel in each iteration. First loop, use the first cell, second loop the second one and so on. Maybe there is another way to do that, but that is how I figured it ou. If you have any suggestions to make it simpler I appreciate.
First of all, you don't have an "excel" file, which is a proprietary format. You have a delimited plain text table with semicolons separating columns and linefeeds separating rows.
You have only one loop. You are probably talking about first iteration, second iteration etc.
Your loop spins so fast that you will only see the last row after the VI has completed. Use a small wait.
All you need is the following code (looks slightly different, because it is LabVIEW 2010). This will display all rows in sequence for however many rows you have. If you only want to display the first 5 rows, you can wire a 5 constant to the N of the FOR loop.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
ReadRows.png ‏3 KB

Stand alone application(.exe) : Error 7 occurred at Open File+.vi: Open File (error: L'erreur 7 s'est produite à : Open File+.vi:Open File)

Dear group members - as i am trying to build a stand alone application , i ran into this problem : "Error 7 occurred at Open File+.vi: Open File" (L'erreur 7 s'est produite à : Open File+.vipen File)
when i select continue i get this error message: "Error 7 occurred at open/create/replace file in Write spreadsheet string.vi->Write To Spreadsheet File (I64).vi->Mono Com Write ini.vi->mainVI2.vi"" ( "L'erreur 7 s'est produite à : Ouvrir/Créer/Remplacer un fichier dans Write Spreadsheet String.vi->Write To Spreadsheet File (I64).vi->Mono Com Write ini.vi->mainVI2.vi" )
i didn't get what's the problem with this vi, i have no problem running my VIs
Can any one here help me out ?
here is the project :

Neither can I. When I opened your Project, there were no VIs present on the top level. The Build Spec refers to a Mainv12, which I finally found buried in the folder Interface 2, but when I tried to open it, there were multiple missing VIs. I notice you have an Interface 2.llb -- is this the same as the VIs in the Interface 2 folder? If so, try getting rid of the .llb (at least for the purpose of sharing your code in the Forum) and re-post your code. As it stands, when I open your Project, virtually every entry is marked "Warning: has been deleted, etc." The fact that so much is "missing" means that I can't easily see/understand MainV12, hence can't guess where the File Not Found error is arising. Sorry.
Bob Schor

Error 7 occurred at Open File+.vi:Open File,NI-488: Nonexistent GPIB interface

I did some clean-up of my computer and have been having issues ever since.
I'm not the one that did the programming; the person who did is long gone.
The VI loads fine but when I hit run I get:
Error 7 occurred at Open File+.vipen File
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
All the necessary VIs are available and I've tried changing all the file calls in the VIs to the new locations but the error is the same.
Any suggestions?
Thanks.

Error 7 is a generic file not found. If it is happening after cleaning up files, more than likely you moved some subVIs called in a main VI to a new location on your computer. If all the VIs are in a project, a possible solution would be to remove the vis in the project directory and add them back to the project as they may be pointing to a previous location where the files were once stored. Perhaps this is what Anon123123123 meant by "linking". Hope this helps.
Regards,
Isaac S.
Regards,
Isaac S.
Applications Engineer
National Instruments

N79 (Error message :Unable to open .File type not ...

Dear nokia service manager,,
Iam sivakumar using the nokia N79 handset.Iam getting the message like this (Error message :Unable to open .File type not supported)when i was trying to open the video file shooted by some other camera.I have tried changing the format of the file..but no use ..i dont get ant suitable software converter in the internet.So kindly look into this matter as i need this very uregently...
hope its a mandatory feature as laptop and mobile interface are simple task nowadays in mobile...
pls reply me..its very urgent...thanku..

You could try Videora (http://www.videora.com/) - the downside here is that they have specific versions for specific phones, and sometimes it will makea file that plays perfectly in the desired phone but can't be shared to other models. The don't show a version for the N79, but try the N96 one because the N96 is the most similar OS to yours that they offer.

Error 2048 not a movie file

QT 7 pro was working fine at first.Now when I try to play a video file I get "error 2048 not a movie file. The file plays fine in another player. Also QT will play a QT movie but not a file. I have QT installed on two computers with the exact same problem on both. please help.

Yes the format of the files is windows media video files. They play successfully on real player and on VLC media player.
They were also playing on itunes,but now they won't play on QT or itunes. By play a movie I mean the movie was downloaded as a QT movie. The desktop icon says QTmovie. The files That give the 2048 error have real player on the desktop icon.I have uninstalled and reinstalled, even disabling norton before reinstalling still error 2048 on QT. P.S. Itunes and QT were downloaded as a bundle, whatever the problem is is affecting itunes because now when i add files to library they don't show up.

STARTING DATABASE : PROBLEM OF Linux Error: 23: Too many open files in syst

Hi everybody,
I am running an RMAN script and get this error,
9> @/u01/app/oracle/admin/devpose/backup/configuration.rcv
RMAN> ###################################################################
2> # Configuration file used to set Rman policies.
3> #
4> ###################################################################
5>
6> CONFIGURE DEFAULT DEVICE TYPE TO DISK;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of configure command at 08/26/2009 20:03:30
RMAN-06403: could not obtain a fully authorized session
ORA-01034: ORACLE not available
RMAN> CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of configure command at 08/26/2009 20:03:30
RMAN-06403: could not obtain a fully authorized session
ORA-01034: ORACLE not available
RMAN> #CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
2> CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of configure command at 08/26/2009 20:03:30
RMAN-06403: could not obtain a fully authorized session
ORA-01034: ORACLE not available
RMAN>
RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/u01/app/oracle/backup/db/ora_df%t_s%s_s%p';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of configure command at 08/26/2009 20:03:30
RMAN-06403: could not obtain a fully authorized session
ORA-01034: ORACLE not available
But this problem is understandable, as the database is not running. The main problem why database is not running, I have found the reason but do not understand how to solve the problem.
Since, the database was not running, I tried to startup the database, I then came across the following which is my problem (Why so many files are open? Linux OS error says too many files open. See below,
SQL> conn /as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 419430400 bytes
Fixed Size 779516 bytes
Variable Size 258743044 bytes
Database Buffers 159383552 bytes
Redo Buffers 524288 bytes
Database mounted.
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/devpose/redo02.log'
ORA-27041: unable to open file
Linux Error: 23: Too many open files in system
Can anybody has run into such problem and guide me to a solution, please?
Thanks

Hi,
yes, this DB was functioning o.k. this configuration script was part of RMAN daily backup.
Last night the backup failed. So, when I opened "Failed job" in the EM, I saw this type of messages.
That was the starting point. Gradually, I tried to narrow down on to the actual problem and found the findings as I have posted.
One way of sovling problem, I thought that, all these processes I would kill and then try to open the database, it might startup. However, that wouldnot lead me in ensuring this won't occur again.
That's why I am trying to understand why it should open, so many processes (why spawn so many .flb files?) Any thoughts you have around this?
I will try to restart the OS as the last resort.
Thanks for your help and suggestions.
Regards,

Can't format external HDD using terminal: Error: -69877: Couldn't open device

Disk Utility won't format / erase Seagate Barracuda 2TB (ST2000DM001) - it is an internal drive but I connected it using a docking station via USB. The disk is brand new and unformatted. System indicates that it is S.M.A.R.T incompatible
When trying to erase the disk, I get error message "disk / link could not be found / opened".
I tried using terminal "diskutil eraseDisk HFS+ newdisk /dev/disk3" but I get this message:
Started erase on disk3
Unmounting disk
Error: -69877: Couldn't open device
Any way I could force format the disk?

Thank you @MrHofman. I had a setup with 2 dock stations and 2 HDDs (my TimeCapsule had crashed and I needed to recover its content disassembling the "box"). I disconnected everything. I restarted the computer., I swithched the USB ports in which I had connected the dock stations; I swithched the HDDs from dock stations, and voilà, the system allowed me to format the "recovery" HDD. Sometimes the "simplest" solutions work...
@Linc Davis: prior to the fix described above, when trying to partition, same thing would occur : "can't open link / disk" error message. But now it seems to be working fine. Thank you anyway!

[Compiler] Error #1063: Unable to open file: /alchemy-darwin-v0.5a/avm2-libc/lib/asmachine.abc

Can anyone give input on receiving this error when compiling? I've come across it a few times. The current project is compiling libjpg from www.ijg.org/
[Compiler] Error #1063: Unable to open file: /projects/zaalabs/alchemy-darwin-v0.5a/avm2-libc/lib/asmachine.abc.
There is no trace of this file, however within the achacks/gcc script there is a line:
$machimp="$libc/lib/asmachine.abc";
Referencing this file. Is this something that wasn't released as part of the 0.5a? Is there a workaround?
Anyone had success with a workaround, or anyone find a magical copy of asmachine.abc?
Aaron

EDIT: found the solution here: http://forums.adobe.com/thread/25449

Premiere Elements - Error 2048 couldn't open file......Question

Similar Messages

Maybe you are looking for