Premiere Elements saved my project with a hue/ over saturation on all my clips in the project

I'm a first time user of Premiere elements 12 and my first project was finished without a hitch but when I published the video the end result has over saturation/hue in the entire video. I go back in to see what happened to the project and when I reopened the project it seems all my clips have been altered as well. I have not touched anything in the adjust tab or applied any effects. However the thumbnails on the timeline bar under quick view have the correct colors. Does anyone know how to revert this effect, check to see if I accidentally hit something or have a possible solution?
Thanks for your help.
Ben

Chilisause
I believe that SG gave you the key to your issue when he wrote
Have you applied any effects -- including Auto Fix -- to your clips? If you open the Adjust panel, do you see a little green dot on any of hte Adjustment options, indicating that an effect has been applied? (Since the clip looks fine on your timeline but not in the Monitor panel, the indication is that you've applied an effect or adjustment.)
Pretty sure his "Auto Fix" was meant to be "Smart Fix". To prove or disprove "Smart Fix" as the factor here, please try the following quick test...
Open a new project
Go to Expert workspace Edit Menu/Preferences/General and make sure that there is a check mark next to the option
"Show all do not show again messages".
Then import from the hard drive one of these images that have developed a purple sky displayed in the Edit area monitor only.
When you drag the image to the Timeline, do you see the following pop up?
If you do not get that pop up, then end of idea. If you do, then
first put a check mark next to "Do not show again" and then click the No button.
Moving forward, you should not be getting any more purple skies unless you want them and create them
with one of Premiere Elements effects on your own.
Please let SG know if his suggestion was on target for the Smart Fix involvement in your issue.
Thanks.
ATR

Similar Messages

Premiere Elements 8 - "not compatible with Premiere Pro"?

I have installed, uninstalled, and reinstalled Premiere Elements 8 program twice. Updated to 8.01. When I save a "new project" file, then try to open it with the same program I created it with (Elements 8), it will not open the file and says: "Projects created with Adobe Premiere Pro and Adobe Elements are not compatible." What is going on? I don't have Premiere Pro, so how could I create a file with it?
Thanks for any help you can provide.
Susan

Try working through the following process from Adobe: Troubleshoot damaged projects | Adobe Premiere Elements
Cheers,
Neale
Insanity is hereditary, you get it from your children

Want to use Premiere Elements 4 or newer with Windows Vista 64 bit??

We bought a new pc with Windows Vista 64 bit - but are now having problems using my Photoshop Elements6 and Premiere Elements 4 with our new pc. it says on the box and on the web - that it is compatible with Vista - so why isn't it working for us? Do i need to buy something else - and if so what?

I am not sure completely about Photoshop Elements - but my main issue is with Premiere Elements....i need to find a program that will work so i can work with all my videos. Trying to find out why it doesn't work or how to get it to work.
Date: Mon, 8 Jun 2009 21:24:11 -0600
From: [email protected]
To: [email protected]
Subject: want to use Premiere Elements 4 or newer with Windows Vista 64 bit??
What problems with PSE?
>

Have to re install elements 11 & premiere elements 11. cause problem with upgrade windows 8.0 to 8.1

have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]

have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]

Premiere Elements 10 AVI file with MJPG CODEC

I am working on a project in PE 10 with video clips exported from MPEG Streamclip as AVI files. They are sports highlight clips of about 20 seconds each. I've been doing projects like these for years and have had no problems since my last post here in 2009.
After importing 30 clips to PE 10, editing the clips down, adding a highlight circle to each clip, and adding titles, I realized I wasn't getting any audio from these clips. I thought that was strange but added some background music which I thought would be fine. But the high schooler who I'm doing this for would like the game audio, so....
I began investigating here. I opened GSpot and found that these files use the MJPG Codec and that the Codec is installed. So I rendered the files (using 5 clips instead of all 30 just to see if this worked first) and the audio plays in the small window. (I also looked at some clips from projects I've done with audio in GSpot to see what Codec they used, which was DivX.)
But in PE 10 I'm still not getting audio. Is there something I can do to the video clips, or the project settings in PE 10 to get the audio back?

I spoke too soon. I thought the new clip had audio because I was seeing an audio track in the timeline (which I was not seeing before saving with the new settings in MPEG Streamclip). But there is no sound.
When I open the new clip in G Spot it says the audio codec is PCM Audio:
I'm guessing there is something different about the video camera used to shoot this video but there must be way some way to get audio in PE 10. Like other postings, when I play the clips, before changing the settings in MPEG Streamclip, using VLC I'm getting the audio.
Any other ideas?

After installing premiere elements 11 from dvd with serial nr.install is interrupted and uninstalled

after installing premiere elements 11 from dvd with serial nr.install is interrupted and uninstalled. what to do?

troubleshoot the installation, http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

My Premiere Elements 9 on Windows 7 no longer opens (it always did before); now at the welcome scree

My Premiere Elements 9 on Windows 7 no longer opens (it always did before); now at the welcome screen it "blinks" once then hangs, without any of the components initializing- please help

If that does not work, then I would see this FAQ Entry: http://forums.adobe.com/thread/792580?tstart=0
It starts with a general checklist for getting PrE set up properly, then goes into some links on tuning up one's system and OS, and finally has links to many troubleshooting articles, plus tools to help one troubleshoot issues.
Good luck,
Hunt

I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an

I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an email with the serial number once the product was registered - But I never received this email. If anyone is able to help me with this issue - that would be great. the registration number is: PEPEP6-5578-6450-8871-9107 I am using a windows based system

If I were you I would first make sure CS6 was deactivated or signed-out. Then download Adobe's cleaner and remove cc, CS6 and any other creative application installed including Creative Cloud desktop application. Then install CS6 and use your CS6 serial number during the install to activate CS6 standard or extended which ever the serial number is for. CS6 Version 13.0 should the be activated. That level of CS6 is extremely bug ridden so be sure to the use CS6 menu Help>Updates to get CS6 updates. Windows should update to version 13.0.1.3 Mac to version 13.0.6. Not Subscription CS6 version 13.1.2...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I selected a clip in the Project window in iMovie 11, opened the Clip Trimmer for that clip, chose the part of the clip I wanted to keep with the yellow bars, and "trim to Selection" in the menu bar is light grey so I can't complete the edit. I'm using a

I selected a clip in the Project window in iMovie 11, opened the Clip Trimmer for that clip, chose the part of the clip I wanted to keep with the yellow bars, and "trim to Selection" in the menu bar is light grey so I can't complete the edit.
I'm using a MacbookPro so can't right click to highlight (as was suggested in this forum for the same problem) and can't seem to highlight that area. What do I do?

When using the Clip Trimmer, you click DONE to indocate that you are finished.
The Trim To Selection is a great tool and I use it all the time, but you use it in the main project timeline, not the clip trimmer. Just select the frames you want so that the yellow border is around them. Then right-click and select Trim to Selection.

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt

How can i move video and music and narration all at once in the project library

how can i move video, narration and music all at once in the project library it is only moving the video

Select the directory with your pngs in it.
Right-click>Browse with Adobe Bridge
Select your pngs
Tools>Photoshop>Load to photoshop layers (not sure how many layers this can handle--you may wind up having to do this in batches)
Save your new psd
In Flash, create a new symbol with a blank timeline
Ctrl-R, navigate to the psd you made earlier
Select all the Photoshop layers
Check "create MovieClips for these layers."
Convert layers to keyframes or flash layers (not important, since you probaby don't need to keep this symbol)
OK
You'll have Movie Clips, not Graphic Symbols, but maybe you can write or find a JSFL to convert them and then you can block select them, click the Properties button, and change the type from MovieClip to Graphc.

Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane, it enlarges it slightly and distorts it. How can I keep that from happening?

Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane, it enlarges it slightly and distorts it. How can I keep that from happening?

Hi
Turn off analyze/image stabilization.
Yours Bengt W

Why can I not use Premiere Elements 12 on PC with Windows 8.1 when the vidio is done with the same software on a PC with Windows 7?

I have made a Video on one PC with Premiere Emements 12 and want to continue on a PC with the same Premiere Elements 12 on and Windows 8.1. The systen wants other Codec.
What can I do?
By the way with Magix is it possible to work on both PC.

Vaihingen
How did you go about transferring the Premiere Elements 12 project on Windows 7 64 bit to Premiere Elements 12 on Windows 8.1 64 bit.
Therein is what I believe is your problem. You in all likelihood do not have a codec problem of any kind, rather Premiere Elements 12 project on Windows 8.1 64 bit with disconnect between it source media and the project file. Here is how it goes.
When you import a file into Premiere Elements project, what you have in Premiere Elements is a copy of the original which is still at its hard drive save location. But the project must trace back to that original on its hard drive save location.
You may have the project.prel (project file) opening in Premiere Elements 12 on the second computer, but what I suspect to be the case is that you do not have the project media on that second computer.
If so....On the first computer, archive the project with File Menu/Project Archiver and its Copy Project option. Transfer the resulting saved Copied Folder to a USB Flash Drive which will be used to transfer the Copied Folder to the second computer. In the second computer, open the Copied Folder, right click the project.prel file in the Copied Folder, select Open With, and then Premiere Elements 12.
Did you set up disc menu in the Premiere Elements 12 Windows 7 64 bit project?
Please review and consider the above and let us know if any or all of that applies to your situation.
Thank you.
ATR

Dvd Menu Adobe Premiere Elements 10 for Mac with bad resolution

Hi, I use a MacBookPro with Mac OS X 10.6.8 - Intel Core i5 2,4 GH - RAM 4 GB.
I just purchased PRE 10 version hoping to solve a problem I had with version 9 for Mac but not with a version 7 for Win.
I
My problem is that when I burn the dvd with the final work in PAL system, the menu of the DVD has the text very blurred at a very bad resolution.
I searched this forum and I didn't found a similar problem for Mac user.
I had the same problem with PRE 9.
Same problem if I insert a logo in the corner of the video. Very bad resolution image in the final dvd.
I tried to change the beginning resolution of the image from very low to very high and the result was the same.
Someone has similar problems? Someone did find a way to solve it?

Dear Bill, many thanks for your answer.
This is the Project Preset chosen.
As the source is a JVC Everio with hard disk, I chose PAL - Hard Disk - Widescreen 48 KHz
The source is as I said a JVC Everio in SD size. I saved the files in a backup Hard Disk. They are .mod files.
I don't know how to see if a Menu Sets is HD or SD. I tried almost all the available Menu Sets always with the same blurry results.
These images explain better than words.
Note that the firt image in the DVD Menu is perfect, not blurry. And this add a little bit of mystery :-)
this is the scene selection that has text blurry
And this is the logo I put in the right bottom side of the video. It is blurry. I put a high resolution image and it was blurry. Then I tried with an image .png with the same width of the video (720 pixels) and this is the same blurry effect:
The solution I use in these days to have goog results is very time expensive.
I make the editing work in my mac, without logo and menu. I make a dvd. Then I import the VIDEO_TS folder in my old pc, with my old version of Adobe Premiere 7.0. I insert the logo, I make the menu and then I make a dvd with my old PC and the resolution is the one I want.
Obviolusly I'd like to do all the work in my Mac...
The same problems and solution I used also with PRE 9.0
By the way, I'm using Adobe Premiere Elements in my Mac instead iMovie because I need to do videos longer than 2 hours. And iMovie has this limit.
Many thanks in advance for help. There is someone that is using Mac and PRE 10 with GOOD results?

Premiere Elements -Saving part of one hour video

Imported from only VHS home movies into Premiere Elements 8 a one hour video. I would like to just flag a specific segments, such as minutes 4-8 and export that to a new avi file. After that I might want to export minutes 12-20, etc.
To date I have been cutting and deleting everyting except what I want to save, saving that file, then importing the original file back into premiere and cutting and deleting everything except for what I want on the next file.
Seems like way back when, I was able to save various segments of an open file, but not sure.
Any help would be appreciated. Tried to ask adobe when searching for answers about Premiere 8 crashing so much, no problems with 7, but they refered me to Adobe.TV, where I did not find any answers. Maybe in tutorial, but not able to find it.
Thanks in advance for any help

Here's a look at the WAB (Work Area Bar), and how it's set. Note: this is from PrE 4, but should be the same in all recent versions.
Hope that this helps,
Hunt

Premiere Elements saved my project with a hue/ over saturation on all my clips in the project

Similar Messages

Maybe you are looking for