Premiere Elements V4 does Not Support Matrox Parhelia 128mb Vid Crd - What video card should I get?

Premiere Elements V4 does not support Matrox Parhelia 128bm Video Card.  Is there a recommended card that will work?
I have an Asus P2B Mother Board.  Many thanks for any feedback.

Welcome to the forum.
About any current card, with good driver support, should work fine. The amount of VRAM is not that important, but I would go with ~ 1GB. The driver support is the main factor.
I am running PrE 4.0 and PrPro CS 2 Production Studio on my laptop w/ an nVidia GeForce 8800M GTX - 512GB VRAM, with no issues. That card/chip is a bit old now, and obviously the VRAM is less, than I mentioned, but to "future-proof" the computer a bit, the ~ 1GB VRAM would possibly help.
Good luck,
Hunt

Similar Messages

  • Premiere Elements 13 - Does not support 2.7K or 4.K formats like used in GoPro and utube... When will it support these formats??

    When will Premiere Elements 13 support 2.7K and 4K??

    I have fixed all the IP adresses to avoid the DHCP problem but I still have problems.
    I have sereval scenarioes:
    1. MC < 1Gb wire > WRT610N < 5.0n WIFI > MX
    I can see HDTV on this one but it disconnects
    2. MC < 1Gb wire > WRT610N < 2.4b/g WIFI > MX
    No HDTV and disconnections
    3. MC < 2.4b/g WIFI > WRT610N < 2.4b/g WIFI > MX
    No HDTV but no disconnections - but very slow and streaming like youtube
    4. MC < 100Mb wire > WRT610N < 2.4b/g WIFI > MX
    No HDTV but nice picture - testing for disconnections right now - 30+ min.
    Result:
    This test was very good. Stabil streaming, no disconnects for an hour. Won't support HDTV but the rest seem to work fine.
    5. MC < 100Mb wire > WRT610N < 5.0n WIFI > MX
    Not tested yet - looking forward to this - might bring me HDTV.
    Result:
    This gives HDTV but there is a problem with stability on the streaming but very difficult to see on the picture. Testing for disconnects - now tested for 30 min. - no disconnects.
    This looks really promissing.
    I am pretty sure that the WRT610N have a problem in the switching part of the router specially when it has to switch from 1G to WIFI. I bought the WRT610N to get HDTV on WIFI and Cisco markets the DMA and WRT610N as a perfect match. But it definately have problems - i still do not understand their silence about this.
    I will come back with the last results when I have them
    /John
    Message Edited by Infraxpert on 01-05-2009 04:38 PM
    Message Edited by Infraxpert on 01-05-2009 05:35 PM

  • Elements 8 does not support USB 2.0 Webcams?

    From what I've gathered Adobe Premiere Elements 8 does not support USB 2.0 Webcams, only supporting USB 1.0 .  Is there a driver or something to allow support for USB 2.0 Webcams?
    - I have an Xbox Live Vision Camera.
    - Windows 7 Professional (Awesome)
    - Adobe Premiere Elements 8 trial version
    I don't wat to buy this until I know my webcam will work.  I liked the onion skinning ability of Adobe, but if I can't get my webcam to work it doesn't really help.
    Thanks.

    USB Web-cams pose all sorts of problems for most NLE programs. One possibility would be to use the capture software that came with the camera, of other, and then using the files in PrE. Depending on what the potential capture formats/CODEC's are available, conversion might be required.
    Good luck,
    Hunt

  • My serial number for adobe photoshop elements 12 and premiere elements 12 does not work

    My serial number for adobe photoshop elements 12 and premiere elements 12 does not work.  On adobe.com it shows that the serial number I received is associated with adobe photoshop elements 9 and premiere elements 9.  I have purchased those products in the past, but just recently upgraded to elements 12.  I can use the the photoshop organizer, but can't open the photoshop editor.

    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here is a link to a page with options to help make contact:
    http://www.adobe.com/support/download-install/supportinfo/

  • Premiere Element 12 does not recognize AVI movies.

    Premiere Element 12 does not recognize AVI movies created with Casio Exilim EX-FH100 camera.
    The operating system (Win 7 and Windows Media Player) recognizes these files without problems.
    While trying to load an AVI movie in Premiere appears this inscription: This file type is not supported, or the required codec is not installed.
    How can I fix the problem?
    Thank you.
    Francesco

    supporto premiere elements 
    Thanks to your advice I solved the problem.
    I installed the codec Morgan M-JPG from an existing link (http://morgan-multimedia-mjpeg-codec.en.lo4d.com/download) different from what I have proposed, this link was continually blocked by my anti-virus.
    After restarting Prenmiere Elements 12 (without reboot) AVI movies of my Casio have been read.
    The operating system of my PC is Windows 7.
    Thank you.
    Francesco

  • Redemption code for Adobe photoshop/premiere elements 11 does not work

    redemption code for Adobe photoshop/premiere elements 11 does not work

    I am having the same issue except that my premiere elements code worked great, but the photoshop elements key failed. Ugh.

  • Premiere elements 11 does not recognize the external ASUS Blu-ray burner

    Premiere elements 11 does not recognize the external ASUS Blu-ray burner

    More on what Hunt talked about...
    Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
    Start --> http://forums.adobe.com/thread/608660
    #2 has WHY Explained http://forums.adobe.com/thread/607390
    Plus http://forums.adobe.com/thread/562941
    And a solution... to try even if you do not have the problems described above
    Set your DVD output to a folder on your hard drive and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)

  • While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • Premiere elements 11 will not let me import and photo's or video. None of my hard drives are shown

    premiere elements 11 will not let me import and photo's or video. None of my hard drives are shown

    This is what I am getting
    [img]http://beakertrooper.smugmug.com/Other/****/i-mS9Njbj/0/M/Screen%20Shot%202013-04-19% 20at%201.34.21%20PM-M.jpg[/img][/url]
    Then
    ][img]http://beakertrooper.smugmug.com/Other/****/i-Z39dq7w/0/M/Screen%20Shot%202013-04-19%20at% 201.34.47%20PM-M.jpg[/img][/url]
    But if I have my Ipod Touch pluged in it will show up as the only hard drive

  • I have tried transferring my purchased songs from my phone to my MacBook, it's asking to authorise the phone but does not give an option to do so, what do I do to get my purchased songs on my itunes

    I have tried transferring my purchased songs from my phone to my MacBook, it's asking to authorise the phone but does not give an option to do so, what do I do to get my purchased songs on my itunes

    Have you plugged in your iPhone to the computer? In iTunes > File > Devices you should be able to "Transfer Purchases."
    In iTunes > Store have you authorised the computer?

  • Photoshop Elements 12 does not support the color space

    I recently installed Photoshop 12 on my computer after a reformat. I was previously using Elements 10. i am not getting this error when trying to import photos from my camera. Photoshop Elements does not support the color space. I am using a Nikon D3200 camera to download from. I never had this problem with Elements 10 using the same camera. How do I fix this?

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • Premiere Elements 9 does not fully support AVCHD

    Don't believe the reviews such as the one on http://video-editing-software-review.toptenreviews.com/ which state that Adobe Premiere Elements 9 supports AVCHD export to a disk. It DOES NOT!
    I happily purchased the product last week based on this review, and what I had thought was a solid brand name solution for editing AVCHD video and rendering it on DVDs. Lo and behold this product only IMPORTS AVCHD - the most popular HD format for consumer video cameras. My export choice is to either settle for low resolution on a DVD or purchase a Blu Ray burner and insanely expensive, Blu Ray disks that are too large for most of my needs if I want any type of HD output.
    Why would Adobe produce such a brain dead product so long after AVCHD as been on the market? As a result of my frustration, two days ago I purchased Corel VideoStudio Pro X3 for less money and it does a fabulous job editing and rendering AVCHD on a DVD. Furthermore it SCREAMS compared to the Adobe product.
    I would highly recommend that anyone who has an AVCHD HD video camera not purchase this product and look at the Corel software instead.
    Am I missing something here?

    Thanks everyone for the posts. Although I didn't really ask a question expecting an answer, with all the back and forth reaponses the correct answer is really quite clear. If you want to easily produce HQ quality edited videos on anything other than expensive Blu-Ray disks with an expensive burner then buy a different product. Premiere Elements 9 doesn't do it.
    I would HIGHLY recommend Corel VideoStudio Pro X3 for those of you who contributed to the responses to my post. it works great, and with one click you can burn a beautiful high definition edited movie on INEXPENSIVE DVDs. They will play on virtually any of the newer Blu-Ray players, since most support AVCHD, and you don't need tp purchase a Blu Ray burner either.
    Hopefully Premiere Elements 10 will get it right. In the mean time does anyone want to but version 9 REALLY cheap? It's worth about as much to me as the salvage value of the plastic that went into the install disc.....

  • Adobe Premiere Elements 11 does not open

    Hello,
    I just bought adobe photo elements 11 and premiere 11. I already had a trial version from Photo Elements11. With the code I could activate the whole program so this succeeded.
    However, I tried to install Adobe Premiere elements 11 (several times) I installed and de-installed and re-installed a couple of times but with no success. During the installation process it does go through the whole installing procedure and everything seemed ok; the icon appears on my desktop but when I try to click to open it, it doesn't open..(it's not doing anything at all, you see the mouse turning into that "swirl circle" very briefly then it stops and nothing opens)
    I also tried to download the trial version and hoped with the code I could open it, but nothing happen there either.
    Hope you can help me out. I also didn;t receive any error messages.
    I have a Intel Core i5-2430M - 2,4 Ghz, Windows7.
    thanks!
    Inge

    Could be the auxilairy processes failing to initialize. Perhaps the event viewer can provide some clues:
    Working with your Operating System’s Tools
    Could also be an issue with teh activation stuff, so try running Help --> Deactivate in PSE, then launch PRE to bring up the activation dialog....
    Mylenium

  • Premiere Elements 12 does not start after error message: display driver is incompatible

    After successful installation and starting Premiere Elements the following error message appears: "Uncompatible display driver identified. Update the display driver for a better and faster playback performance!" Hopefully my translation from German is helpful enough. I confirmed with OK but unfortunately Premiere Elements does not start. I checked the display driver: it is the most actual one: AMD Radeon HD 7610M. Furthermore the hardware should be OK as well: ASUStek with an Intel Core i5-2450M CPU @2.5 GHz; 6 GB RAM; 64 Bit Windows 7 Service Pack 1. What can I do?

    Moonkeys25
    Recap...please confirm that as of this date, the problem exists with or without the antivirus and firewall(s) disabled.
    Moving forward...
    If you issue was specific to the display card error that you have been getting then probable conclusions
    a. the ADM Radeon H7610M driver version is not up to date
    or
    b. the ADM Radeon H7610 M video card/graphics card installed as is is not compatible with Premiere Elements 12 on your Windows 7 SP1 64 bit
    The updated driver version and the BadDrivers.txt file deletion should have corrected the problem unless there is a gross mismatch between Premiere Elements 12 and ADM Radeon H7610M.
    Did you use the link that John posted to get the auto detection of the latest driver version for the ADM card?
    If we have gone as far as we can with the card and its driver version angle on this, then we can try the generalized troubleshooting drills with no guarantees, just hopes
    1. Delete the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    12.0
    and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. You just need to make sure to have the computer's Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
    2. If "1" has no effect on the issue...uninstall, ccleaner run through time, reinstall with antivirus and firewalls turned off.
    a. Control Panel/Program, select Adobe Premiere Elements 12, right click the entry and click on the Uninstall pop up. Then follow the instructions for the uninstall.
    b. Download and install the free ccleaner for a computer run through to get rid of leftovers from incomplete uninstalls and installs.
    https://www.piriform.com/ccleaner/download
    When you are ready for this step, I will give you a step by step through the ccleaner (regular cleaning part and registry cleaning part).
    c. Reinstall from your installation files or installation disc, with antivirus and firewall(s) disabled.
    Please review above and then let me know if I have interpreted correctly where we are in the troubleshooting. Do not start the above plan until we are in agreement on the details and hoped for results.
    Thanks.
    ATR

  • Premiere Elements 11 Does Not Launch

    Hello -
    I've recently installed Premier Elements 11 on Windows 7 (64 bit). I'm having a very similar problem to what the user in http://forums.adobe.com/message/5499536 has been going through. When going to Video Editor->New Project the app simply fails to launch. The thread referenced is painful to read with way too many possibilities for errors along the way. Is there a way to start things up in debug mode or in some other way so the program can tell us what's wrong? The guessing game is tough and knowing that things are fragile when there are changes to the system means this is an exercise that many will have to endure.
    Steve

    Steve
    Let us go through this for your specific situation.
    Windows 7 64 bit. How much RAM do you have installed and how much free hard drive space? Overall what is the processor description, dual core,  ?GHz
    Do you have the latest version of QuickTime installed? And, do you check permission, either running program from a User Account labelled for Administrative Priviledges or by right clicking the destop icon and selecting Run As Administrator?
    Have you been able to open any Premiere Elements 11 project on that Windows 7 64 bit computer to date?
    Rather than have you go through deactivate, uninstall, reinstall at this time, let us see what happens if you delete the Adobe Premiere Elements Prefs file or the whole folder in which it exists.
    Make sure that you are working with Folder Options Show Hidden Files, Folders, and Drives selected.
    Local Disk C
    Users
    Owner
    AppData
    Adobe
    Premiere Elements
    11.0
    and in the 11.0 Folder is the Adobe Premiere Elements Folder that you delete. And, if that does not do it, then delete the 11.0 Folder in which it is included.
    Another candidate for creating problems with the program is the antivirus program. See if disabling that in Action Center, has any impact on your Premiere Elements 11 performance on Windows 7 64 bit. Temporarily remove the check mark next to virus protection.
    It might be easier to go through the thread that you mentioned and work through the possibilities than it would be to do otherwise.
    Another prime candidate is the video card driver and whether or not it is update to date according to the information at the web site of the video card manufacturer.
    All quick enough to do in a systematic troubleshooting plan.
    Under Window Menu in the project, there is an Event category.
    And, there is an Adobe troubleshooting scheme using Logs to troubleshoot installation issues.
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html
    See how you do on the above. Then, if you have not done it already, I would suggest that deactivate the program (in the project Help Menu/Deactivate), close the program, and then go the Control Panel route to uninstall the program. Then reinstall the program. All this with the antivirus and firewalls disabled for this time period.
    How did you do resizing that photos? Did your friend help you with that or is the meeting with the friend still to come. I ask since perhaps the friend could get a first hand look of the situation and perhaps from that perspective target the issue. If not, it is a process of going through the typical troubleshooting schemes  systematically to rule out or in what we can.
    Please take it one step at a time and let us see if we can work through this.
    Thanks.
    ATR

Maybe you are looking for