Premiere Elements VS Pro

What makes Premiere "Pro" stand out from the "Elements" versions?
Is it simply that the pro version has more functions or does it have more power when processing data? I have been using PE3 for well over a year and there are a few issues that I have run into. I am trying to determine if the problems are due to the consumer level software, or if it is a configuration issue on my PC. A few of the problems have been slow encoding and shaky footage on finished products. I can go into more details about the issues if needed, but I was curious if spending more for software solves these (and other) performance problems, or is it simply for more bells and whistles.
Thanks in advance for your input.
Cole

Rob,
The general performance, when comparing like versions of the two programs, Pro and Elements (not, say PE3 with CS4), are going to be very, very similar. The engines on each is similar code.
Where Pro differs is in what it can do and often how it does it. First big difference is in the Workspace, itself. I never had PE3, but have read a lot about it. The interface in PE3 is probably a lot closer to Pro, than is PE4 & 7. The looks are similar, and what one gets with Pro will be a ton of additional features. You state that this is not really your issue, but performance and stability are. In terms of these, Pro will probably tax your system just a bit more than Elements, because Elements is tweaked to be a bit more forgiving on the hardware end. The assumption is that a consumer will not be able to dedicate a workstation just to NLE work, while a pro will, or should.
One of the biggest advantages in Pro is the inclusion of Adobe Encore (as of CS3) in the Production Studio bundle. Encore is a serious and seriously good DVD authoring program. I would not be without my stand-alone version of Encore 2.
Going back about a year, I posted a rough comparison between PE4 and PP2 on the Premiere boards. It was not a side-by-side comparison, just a list of the things that I found different between the two programs. If this is of interest, I'll search for a link to that question.
One of the differences is that most things are done "by hand" in Pro, while Elements offers one-button solutions. Yes, Pro does have a ton of presets, and you can build your own, but you still do much more manually.
Based on your question, I'd say to look at the hardware end of things first, as Pro will likely be just a little less forgiving, but not by much.
Hunt

Similar Messages

Is there a possibility to import a theme (Idvd) to Premiere Elements or Pro

Hi there,
I finally have received my new MBP and was surprised by the new themes of idvd. These Themes are great and I would like to have them also in Premiere Elements or Premiere Pro.
Does anybody have an idea or an advise how to get reasonable Themes to Premiere Elements/Pro.
Thanks for your help.

iDVD themes can't be transferred to other applications, particularly non-Apple ones.
Ask Adobe regarding Premier.

CPU and Motherboard upgrade for Premiere Elements 11

Hi all. Been perusing the Premiere Elements and Pro forums but still have a few questions.
I’m upgrading Premiere Elements from PrE9 to PrE11 and am upgrading some of my desktop’s hardware at the same time. I could use some advice about choosing a CPU, graphics card, and motherboard. The goal of this upgrade is to considerably speedup transcoding without breaking the bank. The budget’s a bit flexible but I’d like to keep it at or under $500 for the motherboard/CPU combo.
The computer will be used for editing and transcoding AVCHD videos. The videos are shot in either 1080i or 1080p using a Panasonic HDC-TM700.
I’m processing about 2-3 hours of video per week and my current system takes a long time to transcode. For example, it takes well over 3 hours to convert 1 hour of AVCHD video to wmv. An Intel Core 2 Quad Q8300 with 3 GB of RAM was fine for the occasional video, but it’s too slow for what’s currently needing to be processed.
New CPU:
At this point I’m looking at the following processors:
i5 3570K
Ivy Bridge
No hyper threading
i7 2600K
Sandy Bridge
hyper threading
i7 3770K
Ivy Bridge
hyper threading
Questions:
) Does PrE11 make use of hyper threading?
) If PrE11 doesn’t use hyper threading is there much of anything to be gained by getting the i7? The i5 is about $90- $100 cheaper than the i7 CPUs and seems pretty quick.
New Motherboard:
I’ve had good luck overclocking Asus motherboards, so I’m leaning towards getting another one, but am open to alternatives.
The choice of board will depend mainly on Intel’s northbridge chip:
Ivy Bridge – Z77 chip
Sandy Bridge – Z68 chip
Question:
) Are there any other northbridge chip/CPU combos I should be looking at?
Current Graphics Card:
nVidia Geforce 8400 GS 512 MB DDR2
Drivers are up to date and downloaded from nVidia.
Question:
) Since PrE11 doesn’t use the graphics card’s GPU, will it be okay to continue using this card for the new build? I’m not a gamer and this card works just fine for the current build.
Additional hardware/software details:
PSU: Seasonic X660
HDD: Four 1TB 7200 rpm drives
Memory: 16 GB DDR3 RAM
OS: Win7 64 bit or Win8 64 bit (haven’t decided yet whether to go with Win 7 or 8)
Thanks in advance for your comments and help.

I have been going through the same process. Yes PE does support multiple threads and definatley go with the ivybridge i7 cpu. Asus is also the board I'm going with. They have made OCing much easier but be careful of high temps that leads to early failure of the cpu . Most of them let you have a maximum of 32 gig of ram and with memory so cheap check out upgrading to a higher grade memory. This can be overclocked as well. One of the ivy bridge cpus has 6 cores but cost $500 plus and requires a more expensive MB as well. too expensive for me though. I believe the built in graphics processor in the i7 k series the HD4000 is enough for PE. For about $650 I got an i7 at Microcenter for $229 and I think they just lowered the price to $200 an Asus MB at Newegg for $140 and 16gig ram for $70 also check out SSD drives in the 128 gig range are about $100 which you could use for you C: drive maybe take it up to 256 gig for more. They are getting pretty cheap
Good luck with your build.

Trouble opening Premiere Elements project in Premiere Pro

Hi All,
Just bought Production Premium CS6. I've been working on a project in Premiere Elements 9, and I'd like to continue working on it in the new snazzy Premiere Pro CS6. But when I try to open the project file I get the following error:
"The project could not be loaded, it may be damaged or contain outdated elements."
I can still open the project in PrE, though, and I can even open other PrE projects in PrPro.
I've tried opening autosave versions, but always get the same error.
Any thoughts on what else to try? I really hate the idea of dropping so much money on PrPro and having to continue editing in PrE.
Thanks!
Martin

So long as the versions of PrE and PrPro are contemporary, the PREL (PrE Project file) should open, or Import, with some caveats:
There are many 3rd party Effects and Transitions, that are in PrE, that do not exist in PrPro - hence their use can cause issues. An example would be the NewBlue FX Effects/Transitions.
There are features in PrE, that do not exist in PrPro, and these can cause problems. An example would be Themes/Instant Movie.
PrE has a tiny subset of the Sonic AuthorCore modules (a larger subset makes up the basis of Encore) used for DVD/BD authoring, and if one has done any authoring in PrE, such as Create Menus, or the application of Chapter, or Menu Markers. Those authoring aspects can cause problems.
First, I would attempt to Import (not Open) the PREL into PrPro.
If that does not work, go back into PrE, and check for 3rd party Effect/Transitions, and remove any. Check for Menu or Chapter Markers, or Menus, and remove those. Same for Themes, or Instant Movies - remove all. Try again.
Now, PrE 9 and CS6 are not really contemporary. PrE 9 came out during the run of CS5 (not CS6), and PrE 10 (changes made in the program) is closer to CS5.5, and perhaps CS6. There could well be just enough difference, as to create problems there, and a PrE 9 PREL just might be far enough back, as to preclude CS6 being able to either Open, or Import it.
Good luck,
Hunt

Error Importing Premiere Elements project into Premiere Pro CS5

Hi,
I am working on a multi-part video project that I started in Premiere Elements 8. I put in hours upon hours of editing on the first part and I found that the more I edited, the more often the program would crash (infuriating!). So I started using Premiere Pro CS5 to produce the second part, resolving to come back to the first part later. Well, I've come back around to needing this first part done, and it is just undoable in Elements (crashes every 20 seconds!). I'd like to import that project into CS5 if possible. The help documentation says this should be perfectly possible... but I'm having no luck.
When I attempt to open my Premiere Elements project in Premiere Pro, it tells me the project must be converted from Elements .prel to Pro .prproj, and I click through the prompts as normal. But then as soon as it starts trying to open the project, I get this:
"The Project could not be loaded. It may be damaged or contain outdated elements."
I downloaded the Premiere Elements 9 trial to see if it would be less crashy (and it is), but I'd really prefer to have all my video in one program, and CS5 does the best job (and has most of my hours invested). Elements 9 opens the "damaged" project just fine and I can edit and export normally, so why can't CS5?
Am I stuck recreating the project from the ground up in CS5?

In very general terms, a contemporary PrE Project (PREL), will Open in PrPro, with the steps that you outlined.
Now, there are all sorts of considerations, for aspects that will not likely work:
Instant Movie/Themes, as PrPro cannot read those
Some Effects that PrPro does not have, like the NewBlue FX
Some Transitions that PrPro does not have
Some Title animation Presets, that PrPro does not have
Do you have any of the above in your PrE Project? There are probably other circumstances, but those are all that come immediately to my mind.
The simpler the PrE Project, the greater the likelyhood that it will Convert to a PrPro PRPROJ file.
PrE 8 and PrPro CS5 should be close enough to work, again in those general terms. I can Open simple PrE 4.0 Projects in PrPro 2.0, but cannot Open PrE 7, 8 or 9 Projects in PrPro 2.0.
Good luck,
Hunt

Premiere Elements project imported into Premiere Pro CS5.5 becomes unusable after first save

I have Premiere Pro CS5.5, and I have been trying for some time to successfuly edit an old project that was originally created in Premiere Elements (not sure which version--probably 7.0). It has the .prel extension. The project imports just fine, and I am able to edit it initially. However, if I save my new Premiere Pro project, close Pr and try to open the new project again, I get the "The project could not be loaded, it may be damaged or contain outdated elements." error message. I have tried many of the various project recovery suggestions people have made in this forum and elsewhere online, but none of them seem to work. I even opened the project in XML Wrench, but there were no errors returned when I clicked "check is well formed." Once I close the project after doing some initial editing, it is gone. Is this a known issue? Is there any way I can be able to edit the old project in Pr and save my work? Thanks!

Have you tried using the project manager to re-copy all elements and timeline etc into a totally new directory. I'm just curious to see if that would make a difference. I'd be intrested to see if when making a new project in this manor if it would because as you have stated the normal save methods haven't.

On Macbook pro how do I reset my premiere elements 12 welcome screen back as it was to ask if existing or new project.

Hi there, on my macbook pro, can anyone tell me please how I can reset the welcome screen in Premiere Elements 12 back to how it was, were it asks to open an existing project or a new one. I made the mistake of changing the settings to open Premiere Elements editor by default but now it opens straight into a new project each time. Many thanks.

alanathome
I am strictly an Elements Windows user, but I think I am on common ground with this response. Please check it out.
Resetting of the Welcome Screen is done using the icon to which the arrow points in the screenshot.
If you cannot get to the Welcome Screen due to a prior set, then in the Open project, if you have a Window Menu, go to Window Menu/Welcome Screen.
Please let us know if that worked for you.
Thanks.
ATR

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

Premiere elements 12 on Mackbook Pro running Maverick

Premiere elements 12 on macbook pro running maverick. Crashes on opening with multi page error message. reinstall does not help

Also, don't forget to run a Disk Verification and a Font Check on your Mac. Corrupt fonts can cause some real problems for this program.
http://forums.adobe.com/thread/940869?tstart=0
It also matters where you got your copy of the program from. The version available in the App Store has had so many problems that Apple pulled it.
There may also be issues with your Retina display, if you have that feature.

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numb

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numbers from the set I received?

yes, that's exactly what you should do,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

In Premiere Elements 8, None of my projects will open. Says projects were created in Premiere Pro

In Premiere Elements 8, None of my projects will open. Says projects were created in Premiere Pro, when they were not. Cannot create new projects either. Basically, the program is completely bricked an unable to do anything once it gets past the welcome screen.
My projects are all saved as .prel
They were all working, when suddenly none of them would work any more. I can no longer use this program, and I really need to. Have already tried running the program as an administrator and creating a second admin account. Also tried going to the basic graphics driver.

GB-92
Thanks for the helpful additional information. Because of the nature of the description of your problem (references to Premiere Pro which you do not have et al), I would encourage you to go directly to the following which I suggested previously by the following question.
5. Have you gone the route of Uninstall/ccleaner run through - regular and registry components of the cleaner), reinstall?
1. Uninstall Premiere Elements 8 via the usual Control Panel/Installed Program area route.
2. Download and install the free ccleaner and run the computer through its regular cleaner and registry cleaner parts.
http://www.piriform.com/ccleaner
Open the program to see something like
Click on "Run Cleaner" with the "Cleaner Tab" selected in the left column of the dialog. Click OK to the pop up to initiate the automatic process.
After the regular cleaner portion is done, then click on "Registry" in the left column of the dialog. It should look something like
Click on "Scan for Issues"
when done
Click on "Fix selected issues"
when pop up appears
Click Yes to "backup changes to the registry"
when done
Click "Fix selected issues" in the pop up that now appears
when done
Click Close.
Please read all the details in the ccleaner link before starting. If you need clarification on anything written before you begin, please do not hesitate to ask.
I use this procedure routine for computer maintenance without issues (Windows XP 32 bit as well as Windows 7, 8, and 8.1 64 bit). It is a widesly used tool.
We will be watching for further developments.
3. Reinstall Premiere Elements 8 with antivirus and firewalls off. After installation of 8, now do the download and installation of the 8.0.1 update from Adobe via the link
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
That 8.0.1 installation can be done with Premiere Elements 8 closed.
Adobe set up that 8.0.1 Update so that they is no 8.0.1 shown in the program after installation of it. You will probably get a message of installation completed successful. The major evidence that it has been installed will be the turn off of the previously default "Automatic Background Rendering" in preferences. You still have to turn off the "Automatic AutoAnalzyer" in Elements Organizer, a must do.
Please review the above.
Thank you.
ATR

Premiere Elements 8 - "not compatible with Premiere Pro"?

I have installed, uninstalled, and reinstalled Premiere Elements 8 program twice. Updated to 8.01. When I save a "new project" file, then try to open it with the same program I created it with (Elements 8), it will not open the file and says: "Projects created with Adobe Premiere Pro and Adobe Elements are not compatible." What is going on? I don't have Premiere Pro, so how could I create a file with it?
Thanks for any help you can provide.
Susan

Try working through the following process from Adobe: Troubleshoot damaged projects | Adobe Premiere Elements
Cheers,
Neale
Insanity is hereditary, you get it from your children

Adobe premiere elements 10.0 uses more than 100% cpu on macbook pro lion osx 10.7.3

Hello All,
We have a macbook pro 17" 2.66Ghz Core 2 Duo, 4GB DDR3 running lion osx 10.7.3.
When trying to run a video in adobe premiere elements 10.0, the video really lags. I checked the activity monitor and the cpu usage for the elements app process goes above 100%. Sometimes even 170%.
No wonder why its struggling to render the video.
Anyone noticed this issue too?
All suggestions welcome.
regards
Ankit

Hello OgelThorpe,
Thank you for the suggestion. I will try that soon. My macbook meets well over the hardware requirements for that package. Also only the cpu usage is high, i have 4GB ram and only 500-700 MB of that gets used by adobe premiere.
I have have run the hardware test in a loop and it passed everytime, so i dont doubt the hardware.
regards
Ankit

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and f

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and further more) stops installation and shows Installation ERROR: ASU has quit unexpectedly, Media DB Error: 18. Please help!

run the cleaner and retry installing per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Can't open adobe premiere element 11 on my MacBook Pro? which I buy it from App Store? plz help

can't open adobe premiere element 11 on my MacBook Pro? which I buy it from App Store? plz help
its says that its currently not availabe
I have so many work counting on this programme plz help

Thank you for your replay
It was working on my Mac before installing the new update of Mac software. then its corrupted
from where I can ask for refund? as I bought from App Store ?
regards

Premiere Elements VS Pro

Similar Messages

Maybe you are looking for