Premiere export for X264 encoding in Quicktime

If I am going to ecnode a file through X264 encoder after editing in Permiere Pro 5.5, what codec should I export out of Premiere or Adobe Media Encoder first? =
Thanks

Peter.
Some times you have to let things go a bit because "video" is a different world to stills and print media. (although that is a can of worms in itself)
Your clients or audience do not have a side by side comparison ( as you do) and their display devices and set ups are simply something you have no control over.
Something you do have control over is your own system so set it up and then trust the waveforms and other scopes. That is your personal reference point.
I see no value in getting a "TV" for this purpose. A decent Computer Monitor will serve you better.
BTW - here is no harm in making a little "compensation" for the export media. I wil often add 'Gamma Correction' (Effect) for a QT Export intended for broadcast. ( I add +1 to base of 10. ie. 11)

Similar Messages

Ot: adobe premiere export for youtube

Hello,
I know this is off topic but thought i would ask the question
any way as no
one really replies to the adobe premiere forums.
any way my question is this
I have a digital video camera which shoots at 16:9 format
what would I be best exporting it at for the use on youtubes
new format. I
would be grateful for advice on what should my export presets
be and my
pixel aspect ratio.
if any one can offer advice I am grateful
cheers
k

I do not have PP open on this machine...but, I believe you
set your
workspace to render at whatever dimensions you want. Also,
look at the
presets in the export.
"Twocans" <[email protected]> wrote in message
news:glsvh4$r4a$[email protected]..
> Thank you for that
>
> just a quickie
>
> I am exporting at the moments in my test 720 x 576, i
just need to be
> clear as to what is correct
>
> you mention ".....just render it as a wmv file "
>
> OK I shall , but and this is a big but, I dont want the
black panels on
> both sides of my output from youtube. (youtube has new
format)
>
> before was no bother with a 340 by 220
>
> this the 16:9 out put from my camera is one thing but
then using premiere
> to do the same can be a problem.
>
> i am grateful for any input
>
>
> regards
>
> k
>

Adobe Premiere Pro CC / Media Encoder CC Crashing On Export

Hi,
I have a 1 hour project consisting of
- iPhone 5 Video clips recorded at 1080p/30fps using app FilmicPro
- Various Image files, imported as PSD's
- WAV Sound files
My Sequence Settings are:
Export Settings are:
As you can tell by the file name, i already installed ALL updates.
I just installed a new graphics card (GTX 770) a few days ago, but these crashes were happening before i installed the card, and now after I've installed it, so it's not related at all (before i was just using my CPU (Intel HD 4600). (At the moment I have CUDA enabled).
Full Specs
- Windows 8.1 Pro
- Adobe Premiere Pro 7.2.2
- Adobe Media Encoder 7.2.2
- Intel i7 4770k
- 8GB RAM
- NVidia GTX 770
The crashes always happen at the exact same place on both Premiere Export and Media Encoder, no idea what's causing it, I've played around with the settings and managed to export it a few times but not at the quality I want. If i render my entire sequence preview's first, and then export using preview files then it exports fine using MPEG Preview. Not exactly the format/quality I want though, if there is anything i have missed out then please ask, I do intend to check the boxes for Maximum Bit Depth and Maximum Render Quality
P.S. I have already tried
A) Clear Media Cache
B) Reinstall Premiere/Media Encoder
C) Change Location of Project Files
Thanks,
Jay

Hi Jay Singh,
Thanks for posting on Adobe forums.
Please try to check the resolution on the PSDs in the Project. and Make sure that the resolution should not exceed more than 1920*1080. This is could be the issue on crash on export.
Let us know if this will help.
Happy Editing,
Sandeep

Export for web problem

hi, i've used the export for web option in quicktime pro but all i get when trying to play the movie is the quicktime logo with a question mark.. note that this is locally on my imac.. i've also tried uploading the folder on my server and play it from there to no extend.. i dont know what's going wrong.. the files exist and im even able to play them by scrolling down to the bottom of the ReadMe.html and clicking on one of the versions links directly..
any advice?

QuickTime Pro can play audio from MPEG-1 formats but can't extract it during export.
Solution?
Use MPEG Streamclip (free) to convert the MPEG-1 to other QuickTime formats.

Quicktime encoding using x264 encoder failing in AME 6.0.2.81 and Mac OS 10.8.2

I'm trying to encode an x264 codec Quicktime using AME 6.0.2.81 and Mac OS 10.8.2. I also tried it with two versions of the x264 encoder which I downloaded from here: http://www.macupdate.com/app/mac/24173/x264encoder
This encoder works 100% fine and better than the h264 encoder when using Apple Compressor and Apple QT Pro V7. I've been however trying to transition all of my video encodes to AME due to a number of reasons: dynamic link to AE, Premiere and the interface to name a few.
Everytime I start an encode it gives me an error and I hear that blasted sheep. lol. This is what the log displays, which is frankly probably no help to anyone.
- Encoding Time: 00:00:00
01/13/2013 04:48:10 PM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
I've also tried to specify the bitrate and have had no luck. Whether I specify the bitrate or not, I still get the error. The source video has been PNG sequences and ProRes movies at 1920x1080, 29.97fps. Both result in the same unknown error.
Any suggestions? Thanks!

I know this is pretty old now, but I thought I'd add a reply for those who are having this issue. I just had AME CC 2014 fail on me today, and this is the FIRST thing I've ever tried to render with it. I'm using a TGA sequence and exporting to an X264 codec Quicktime MOV file at 720p. I restarted a few times, repaired permissions etc. and nothing worked except for the following.
I went to:
Library/Preferences/Adobe/Adobe Media Encoder/8.0/
I deleted the entire 8.0 folder (or you could delete whatever version you are having problems with). I then restarted AME and the preferences were recreated and I could successfully use the x264 codec again. Hope this helps someone.

Premiere & Media Encoder show Quicktime presents but fail on encode

My Premiere & Media Encoder CS6 both show Quicktime presents but fail each time I try to encode directly to Quicktime with .mp4 codec.
Quicktime is installed on my machine, which runs Windows. I'm using Adobe Creative Cloud CS6.
Goal: to use the Quicktime format and sucessfully encode video sequences as .mp4 files at various settings.

BUMP! To this thread as I am still having an issue encoding QuickTime files. Below is a quick recap with some new information.
All testing is done on a system running Windows 7 Professional 64-bit SP1 with Adobe Media Encoder CS6, CC, and CC 2014 (same results across all versions).
The failure occurs after a few seconds of attempted rendering, with only the following message from AME:
"Encoding Failed
Export Error
Error compiling movie. Unknown error."
Important note: This problem DOES NOT exist on a similar system running Windows 7 Ultimate SP1. So it would appear the problem may be OS specific to Windows 7 Professional (although there are a few forum threads with people experiencing the problem on Macs as well).
That said, here's what happens on the Win7 Pro system:
QuickTime movie encoding fails at 1920x1080 both from a dynamically linked Premiere timeline and from a rendered file.
TESTS:
1) H264 video with AAC audio FAILED
2) H264 video with uncompressed audio FAILED
3) Uncompressed video with AAC audio FAILED
4) Sorenson video with uncompressed audio FAILED
5) Uncompressed 10bit YUV .mov with uncompressed audio WORKED!!!!!
Of course, a :30 second television commercial rendered this way is near 5GB and is not the way most broadcast stations want a file delivered.
To sum up: all of the HD presets and custom settings for QuckTime with any sort of compression, fail to render on systems running Windows 7 Professional.
Here is a link to a similar issue, but the solution listed did not work in my case.
Quicktime encoding using x264 encoder failing in AME 6.0.2.81 and Mac OS 10.8.2
Here is a link to the ongoing discussion about this on Creative Cow
PC H.264 Quicktime crash : Adobe Premiere Pro
Any insight is welcome.

Premiere Pro CS5 - Media Encoder Crash when Exporting to MPEG-2

System:
Core i7 920 @ 3.8 Ghz
Gigabyte X58A-UD3R
12GB DDR3 1600
External Sound Card - M-Audio ProFire 610
OS Drive - 2x300GB WD Raptors - Raid 0
Project Drives - 3x300 WD Raptor - Raid 0
Video Card - Geforce GTX 285 1GB
Adobe Premiere Pro CS5 and Media Encoder CS5 continually crashes or hangs every time I try to export to MPEG-2. I can successfully render to every other codec without any issue, but need the MPEG-2 for an Adobe Encore Project.
The project is approximately 38 minutes long and contains AVI and MP4 files, all of which were ripped from DVDs as I'm producing a reel for a producer who provided his DVDs for me to rip and use as content.
Possible issues:
1.   Currently have Magic DVD Ripper and DVD Fab installed (codec conflicts?)
2.   Originally ripped the DVDs at 630x360 (my mistake - hadn't really worked with a DVD ripper before and was the largest avi pre-set) and I'm exporting to MPEG-2 standard 720x480 Widescreen) (I know I should've just ripped them as the original lossless MPEG-2 files - I'm a tool)
2.   Blank space in the timline (there are a number of these)
I would like to get some input before I try to export to MPEG-2 again as I blew a capacitor on my old mother board (Gigabyte x58-ud3r) after I had gotten my computer to start rendering a MPEG-2 after about 50 tries to export/launch media encoder set on MPEG-2. I just installed my new motherboard to replace it. Clearly MPEG-2 taxes the system more so than any other codec (from what I can tell). However, I thought the issue with the blank space/no media in the timeline was fixed with CS5. I saw in a previous post that someone thought that ffdshow was conflicting with AME. I don't have ffdshow, but I believe that's a ripper program like Magic and DVDFab.

I experienced this at one point. Searching the WEB I saw suggestions that there was a problem with a recent version of Quicktime. (I have no idea why the quicktime player would have an impact.) However, reverting to an earlier version of Quicktime fixed the problem. Search this board using quicktime as a search phase. The quicktime web site allows you to download the earlier versions. I'm not at my editing machine, but I believe that I am at version 7.5.2.

At the end of exporting Premiere freezes for a few minutes

Hi,
my computer is a i7 4930K @4,5GHz, 16GB RAM, 250GB SSD, Radeon 6950.
I was editing a 50 minutes long movie (cca 20GB source clips, cca 4,5GB output movie).
The export ran very well finishing after about 25 minutes but then Premiere froze with message "encoding, 0 seconds remaining" displayed and nothing seemed to be happening.
I realized the HDD activity was shining (not even blinking), the Widnows resource monitor reported cca 70-100MB/s transfer on my SSD (even though I think my SSD should be faster) and when I held F5 while looking into the export directory the output file was growing on capacity.
If I concider 70MB/s writing the task shloud be done in cca 1 minute. But it took I would say 5 minutes or even more finishing this task. RAM was not even fully used.
Is this behaviour normal?
How can I improve this? Is my SSD slow?
Thanks

Multiplexing is the process of interleaving the audio and video in a single output file. When you export with multiplexing set to None, you'll end up with the audio and video in separate files. That's probably not what you want.
That said, I suggest doing one export with the multiplexer set to None. If encoding then completes immediately upon hitting 100%, that confirms that multiplexing is what's adding time at the end.
What I don't know is how long multiplexing should take for a sequence of a given duration.
If you're so inclined, you could submit a bug report that the progress bar doesn't factor in the multiplexing time.

Premiere Pro CC not queuing exports into Media Encoder CC

I try to make this simple...
standard export from PP CC to ME CC
File -> export -> media, then hit queue.
Media encoder opens and just sits there. Left it for hours to see if anything would ever happen, and nothing ever did.
I've restarted the programs and machine dozens of times and that does nothing.
I can still export from PP CC.
I have no CS6 products left on my box.
I also tried to open the project from Media Encoder and load the sequence that way with no luck.
Thanks for the help!
On a Mac Pro
Premiere version 7.0.1
Media Encoder version 7.0.1.58
Adobe Creative Cloud for Teams Member (so it's licenced and updated to the fullest)

rforgaard wrote:
I had this exact same problem, and I figured out the solution in my case. I know the original problem report is ancient, but there are recent replies, so I am adding my solution here. I spent untold hours figuring this out, so hopefully this will save someone else some time.
There can be other causes to this problem, I'm sure. I'm just telling you about what fixed this problem for me.
Just to clarify, here is the symptom: Running Windows 8.1. Standard export from Premiere Pro CC 2014.2 to Media Encoder CC 2014.2, using File -> Export -> click Queue. Media Encoder opens and just sits there. Premiere Pro is hung and has to be forcibly terminated.
I spent countless hours on this. I thought I had messed up my computer's configuration somehow, so (believe it or not) I re-installed Windows on a freshly formatted hard disk, re-installed Creative Suite, same problem. (I can't believe I wasted all that time; I feel like a dummy.)
I finally narrowed it down to a very simple test case with a very tiny one-clip sequence that is less than one second long. Same problem.
It turned out to be a problem in the Premiere Pro project file itself. I suspect that a small file corruption somehow snuck into the project file, that was completely invisible. In that clip in my project, if I removed the "Vocal Enhancer" effect, the problem with exporting to Media Encoder went away. If I then re-added the very same "Vocal Enhancer" effect, the problem was still gone. It must be some small corruption in the ".prproj" file that went away when I removed the "Vocal Enhancer" effect and re-added it again.
NOTE: I DON'T think that there is some kind of bug with the "Vocal Enhancer" effect. I don't think this problem has anything to do with "Vocal Enhancer" per se. It is just some kind of small generic corruption in the project file. When Premiere Pro tries to export that sequence to Media Encoder, the problem occurs. It was just a coincidence in my case that removing and re-adding the "Vocal Enhancer" effect made the problem go away.
BOTTOM LINE: If you find that you have this bug where Premiere Pro hangs when exporting to the Media Encoder queue, try the following: Create a brand new project with a single clip in it, and export it to the Media Encoder queue. If that works, you know that it is not a problem with Premiere Pro in general; it's a problem in your specific project file. Once you've made this determination, make a copy of your original project file, and remove clips from the project until the problem goes away. Keep narrowing it down until you find the clip(s) that are the issue. Then, try removing and re-adding any effects on those clips, or even removing and re-adding the clips themselves, to fix the problem. Eventually, by removing and re-adding a specific effect or clip to your project, the problem will vanish (hopefully). It's just a matter of narrowing down which half of your project the problem occurs in, then which half of that half, etc., until you have it narrowed down to one clip or group of clips that need to be removed and re-added.
Having said all this, it is a bug that ideally should be fixed so someone else doesn't spend untold hours trying to figure out the problem. To that end, I create a tiny ZIP file that just has project file and the single media clip needed to reproduce the problem, along with a small description "READ ME.txt" file that explains the very simple steps to reproduce the problem. I have submitted this as a bug report to Adobe using their official online bug report form at www.adobe.com/cfusion/mmform/index.cfm?name=wishform along with a link to the ZIP file so they can download and reproduce the problem.
If anyone else is curious about reproducing this same bug, you can also download the small ZIP file if you want to. I guarantee it doesn't have any viruses or anything - it's just two small files to reproduce the problem. To download the ZIP file containing that project file, media file, and "READ ME.txt" file, you can get it at www.forgaard.com/files/PremiereProBug.zip.
I hope this saves someone some time. This one sucked up a zillion hours of me chasing apparitions.
I was having a problem with exporting a sequence to AME. PPro would freeze and I would have to force the program to close. This was on a project where I was just running out a bunch of interview clips for the director to look at. One of them had a audio effect (DeHummer) on it, and it was the one that was giving me troubles. I selected the audio and right clicked then "Render and Replace" then it would export to AME with no issue. Thank you for your well written response to this thread. While it may not have fixed the OP's issue, it did help with mine....
Thanks,
Phil

Exporting to Media Encoder crashes Premiere Pro CC 2014

Greetings,
I am experiencing a problem with premiere off and on. Right now it is an on problem. When I am exporting from Premiere Pro CC (and CC 2014) it will intermittently crash Premiere. I have tried this with several different audio and video formats (AVI [Lagarith and uncompressed], WAV, H.264, MPG2, AAC, etc). At the moment, every time I go to export to queue it locks up and hangs on the "Preparing data for export..." Media Encoder Launches and then it just freezes. I get "Problem Even Name: AppHangB1" over and over. Sometimes a full restart will fix this temporarily and sometimes it goes away for a long while. I managed to get a few sequences exported and then it just kept freezing on every PP CC restart.
Here are my system specs:
Premiere Pro CC (up to date)
Win 7 64bit (up to date)
i7 970
24GB Ram
NVIDIA 470GTX (driver up to date)
3 x 1.5TB internal
4TB internal
3TB internal
12TB RAID 5 via USB 3.0
USB 2.0 and 3.0 drives
FireWire audio device (M-AUDIO FireWire1814)... although, I am not using it for playback. It is connected.
Footage is from C100 H.264 .MTS, H.264.mov from 7D, and H.264 .MOV from iPhone.
All stock video plugins with a few third party audio plugs.
This problem happens with and without third party plugs, but it happens that this project uses them.
I have chatted with Adobe help twice about the matter and nothing has come of it. Log out, log in = same. Restart = same (sometimes), create new user account = same, and so on. The only thing I haven't done is completely re-install premiere, which seems a bit overkill. One of the reps said he would get back to me in a few days after he watched the issue via screen share. Never heard back.
I get the sense that this has something to do with PProHeadless.exe not launching or not running properly. When the crash happens on a fresh restart of PP CC 2014 PProHeadless is not running. I can start PProHeadless and it will send sequence to media encoder. When I try to export another sequence from the same project it crashes and I see another instance of PProHeadless launched.
Also, once the projects are exported to Media Encoder, I can encode them to any format with no problem. The problem is getting the sequences there!
Is there anything that I am overlooking here?
Thanks for the help!

Hi
Premiere pro cc 2014 8.0.1 (21) build
Encoder CC 2014 8.0.1.48
I use CC for Teams so it updates all the time.
Again when I tried to use it today by letting premiere open it by sending an output into Queue it crashed both Encoder and Premiere.
In order to shut down Encoder and Premiere I had to go into Task Manager and "End Process Tree" on everything adobe I could find because just ending Encoder did not work it would not close. I remembered that years ago when Premiere would crash we had to end a photoshop process. I found photoshop open even though it was not "alive" on my task bar. I had used it yesterday but had closed it. I also had to close dynamiclinkmanager.exe *32 as well as one of the three Adobe CDF Helper.exe*32. They popped back on but Encode closed and then I got a message that Premiere needed to close and did when I clicked the button to let it close.
After all this I re-opened Encoder by itself and checked the Preferences finding that Import Sequences Natively option was again checked.
By the way for me, "Launch AME manually, then drag the sequence from PPro's Project panel to AME's Queue (or to a preset in the Preset Browser). That uses a different code path than the File>Export>Media workflow." won't work most of the time because I do live events of panel interviews that may run 2 or more hours. I need to break them down to chapters for the web
Also I know this isn't part of this problem but I and many others would still love dynamiclink to work to Encore because the DVD is not dead yet. The current work path is a drag.
Looks like some programers and engineers have some work to do.
Thanks
Dennis
My computer:
Self built PC windows 7 Professional 64 bit Build 7601 SP 1 I use auto update so it is up to date.
ASUS P6x58D Premium Motherboard
Intel (R) Core i7 930 @ 2.80 Ghz
Installed Memory 12 GB
NVIDIA GeForce 9500 GT
NVIDIA GeForce GTX 580
2 Apple Monitors and a HP full HD Monitor
With a BlackMagic Intensity Pro Capture Card

Premiere cc 2014 don't let me export thru media encoder its stop and close the software after few min

premiere cc 2014 don't let me export thru media encoder its stop and close the software after few min

Peferling... I have a positive update! I went to the area that typically made things die. I noticed it was at the tail end of where I inserted a sequence into another sequence. I also noticed I had three tracks in that section with graphics. So I copied all the tracks from the inserted sequence... then removed the inserted sequence and re-inserted the actual tracks. At this point I no longer had an inserted sequence. I then simplified the three tracks of graphics into one. Re-applied my transitions and did last tweaking. I once again tried exporting as H.264 HD... et voila! It worked! Something must have been breaking it.
For now I'm okay and have been able to export into other formats. I want to thank you so much for your input. Regards, Nelson

Using Quicktime's "Export for Web" feature in iWeb?

Greetings,
Does anyone know if this is possible within iWeb, that is, to use movies created using Quicktime's "Export to Web" feature, which really seems to deliver superior movie quality?
Much appreciated,
DaveB

Thanks, good stuff, though I'm still having a small problem with this. I'm getting a gray line around the top and left of my movie and the right side of the player is getting cut off. When I try to make the width larger, it just moves the gray line further to the left.
Any ideas?
http://www.brianderr.com/brianderr/copythis3.html
*This is the script that I added to the html snippet in iWeb.* I changed the height to 505px because it was cutting off the bottom of the player at 496.
<iframe src="http://idisk.me.com/brianderr/Public/KANYE%20PT%201/kanye1.html"
style="width:720px; height:505px";
scrolling="no">
</iframe>
*This is the script from my read me file that I kept:*
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html>
<head>
<title>QuickTime Pro - Export for Web - KANYE PT 1</title>
<script src="http://www.apple.com/library/quicktime/scripts/ac_quicktime.js" language="JavaScript" type="text/javascript"></script>
<script src="http://www.apple.com/library/quicktime/scripts/qtp_library.js" language="JavaScript" type="text/javascript"></script>
<link href="http://www.apple.com/library/quicktime/stylesheets/qtp_library.css" rel="StyleSheet" type="text/css" />
</head>
<body><script type="text/javascript">
</script>
<noscript></body>
</html>

Best Quicktime settings for Video Encoder?

This is to reiterate the issue originally posted under
this
topic.
Summary: CS3 encoded FLV (using Quicktime movie as source)
stops playing halfway through (likely related to the audio)...
Solution: Set audio of Quicktime movie to 44.100 kHz (not
22.050) sample rate before encoding to FLV.
Continued Issue: Is Adobe working on a fix to the Flash
Video Encoder so that all Quicktime settings are supported?
Question: Any recommendations for the "best" Quicktime
video/audio settings (codecs, frame rate, etc.) for FLV encoding to
optimize quality and minimize file size?

Voddie,
I'm definitely no expert; so if others have better info, I
hope they will post too. And the guidance below is from a Mac
perspective.
Using
Quicktime Pro, you can export each movie and adjust the
Options. Under the Quicktime Options (see this
screen
image
for the two settings windows that you will access), the Sound
Options is where you'll set the sample rate to 44.100 kHz, then
save the file(s).
If Quicktime Pro is not available, you might look into
ffmpegX
as an option (though I have not tried this myself).
Note: I read that for version MX, it was recommended that the
Quicktime sound be uncompressed, or encoded using ALaw 2:1 or ADPCM
codecs. I'm not sure if this is true for CS3. Again, I hope others
will chime in.
Patrick

How on earth do you export to MPEG-2DVD in Premiere Pro & or Media Encoder?

I'm having the same continuing problem in Premiere Pro CS5.5. I cannot export a sequence out as a MPEG-2dvd in Premiere Pro, nor as a MPEG-2dvd in the media encoder. I even tried to encode the file as an AVI file, and then take the AVI file and convert it to a MPEG-2dvd in media encoder. No dice. The file I'm trying to do all of this with is a 26minute sequence on the premiere timeline, so it's no space and data hog. It's originally an MPEG-1 file. I keep getting the error code that both Adobe premiere, and adobe media encoder can not read m2v.xmpses files. I already understand that these have broken into seperate files, with the m2v in there as the video, the audio file representing the audio, and the xmpses containing the metadata, but these files are not seperate in my experience with this problem. the m2v.xmpses is one file, and it can not be seperated. Ive been told that these files are seperated streams that need to be "muxed" together into one workable file. How do you do this?
Thanks in advance to anyone who attempts to tackle these problems.

SAFEHARBOR11 wrote:
If working with NTSC, then your Sequence should be DV 720x480, so as to match what the DVD will be.
Not to split hairs Jeff (nor to distract from the purposes of the OP), but you don't always want to match sequence settings to output, and the OP may not actually want to do this either - especially when working with lower quality assets and not knowing how many different ways the edit will be used.
Adobe's mantra with Premiere Pro is "edit once, publish many" and so let's consider a hypothetical scenario where you are creating a sequence to be distributed to web and DVD. If your assets are 1280x720 60p and you put them in a DV 720x480 (4:3 0.9 PAR 29.97) sequence to match an intended DVD output, then you are "stuck" if/when you decide to render out an H.264 720p sequence for Vimeo. You have to re-build your sequence at that point.
99% of the time, you want to create a sequence that matches your asset parameters, or that at least matches the majority of the assets. Then you are editing with the "raw" format and ready to up-res/down-res without creating multiple sequences with separate edits. This becomes even more imperative when and if a re-edit comes down and you find yourself having to execute identical edits across 2 or 3 or 4 different sequences.
Just wanted to clarify that point. That's also part of the reason why PPro allows you to create a new sequence based on an asset's parameters by drag-and-drop.

No Export for F4V or FLV in Premiere

Recently i had an Update to CS6, afterwards i Noticed there was no Export for F4V or FLV in Premiere as there was before. is this an issue? can any one explain what moght have happened? i dont think the UPDATE i got related to PPRO i think it was more Speedgrade and Camera Raw. any help or advice is greatly apprecaited

here you go, i can see F4V/FLV in Media Encoder, this is PPro

Premiere export for X264 encoding in Quicktime

Similar Messages

Maybe you are looking for