Premiere loading media.... takes awhile.

I have an i7 3770k CPU, 16gb RAM, and a local 11tb RAID 0 drive.
I'm editing a feature film shot on a Red Epic.
It doesn't seem that Premiere can handle the volume of Red media in our project. Everytime I load the project, it has to 'load' all of the media... about 8000 files right now. This takes about 1 to 3 minutes to take place. Until this loading occurs, Premiere is unusable.
A few questions:
1) Is Premiere intended to edit large projects, or must I break up this project into smaller projects?
2) Why does 'loading' the project media take so long? I doubt that using proxies for my Red media would improve this 'loading' process.
3) Why can't Premiere keep a database of my files so that it doesn't have to poll them all every time I load my project?
Michael

Premiere can certainly handle large projects. Including full-length feature cinema.
As to question 2 ... some folks report "long" loading times, for others it's near instantaneous. There are some articles through the Hardware Forum's "Tweakers Page" on setting up computer resources for best utilization of hardware for Adobe apps, you might peruse those.
Question 3 ... What PrPro does is make sure it have all assets of the project identified & ready to go, as the program uses those assets as they are & where they are coupled with whatever effects/instructions you've made into the project to show on the preview monitor or program monitor what's going on ... and of course, to render on export. Until they have all those necessary project assets "polled" as you call them, the program doesn't have a clue what it's working with. It doesn't build a completely new clip on disc for the sequence you're working, as you're probably aware.
Neil

Similar Messages

Premiere 12 won't load media

Why won't my premiere 12 add some videos from my digital camera but will load other videos from the same camera?

We have Windows 8.1. My camera puts out MTS video, but it fails with these as well as MPG video that I convert. I've always been able to hit add media and highlight several sources and they would load for the project. Now I'm lucky if one will load. I am adding video files to the project. I press add media. I choose the files and folder option and then I see my videos listed. I highlight one and the add media box showing the video loading appears. At this point about 90 % of the time it seems to freeze and show no progress on getting the clip over. I have walked away and given it over an hour and yet nothing loads. I will then hit cancel. At this time I get a message that it is not responding and the program crashes. So I begin again and try one video file at a time and it will work for a couple and then crash. I'm caught in a perpetual cycle. I'm not loading huge videos. I have been adding two and three second clips.
Thanks,TLB
From: A.T. Romano <[email protected]>
To: Toni Burgess <[email protected]>
Sent: Monday, April 13, 2015 6:53 PM
Subject: Premiere 12 won't load media
Premiere 12 won't load media
created by A.T. Romano in Premiere Elements - View the full discussionENJsGma What computer operating system? Have you updated 12 to 12.1 using an opened project's Help Menu/Update? If not, please do so. What is the brand/model/settings for the camera recording the video? Are the camera settings the same for the video that will and will not load into the project. Are all these videos from the same recording session or is their recording spaced over sessions and days? How are you adding the video files to the project? Are there error messages associated with the failure to load these video files? If so, what is the exact wording in these messages? Let us start here and then we can decide what next? Any questions or need clarification, please ask. Thank you. ATR If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7435449#7435449 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7435449#7435449 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Premiere Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Cannot load media from organizer into premiere elements 9.0

I have spent the majority of the day trying to load media into a new project in premiere elements to edit the video. When I select the video and click edit in premiere elements, premiere opens but no media is available. It never loads the videos. I can review the videos including sound in elements organizer. I have a Canon Vixia HFS10, the file types were loaded directly to the harddrive of the computer as .mts. I have changed the presets for the type and that doesnt seem to help. I have updated premiere 9.0, disabled security, updated windows (vista).
Does anyone have any suggestions?
Thanks,
De

De
Premiere Elements 9.0/9.0.1 on Windows Vista (32 or 64 bit?)
Let us try the following before we get into an extensive exchange of problem details.
Your Elements Organizer 9 .mts video that you are trying to import as media into a Premiere Elements 9.0/9.0.1 project is only a thumbnail that traces back to the source video which exists saved to a computer hard drive location.
What happens if you open a new project (with project preset set to match the properties of this particular video) and import this .mts video from the hard drive save location into the new project with Premiere Elements 9.0/9.0.1's Get Media/Files and Folders? Does the video import into the project?
As an aside, do you have any other versions of Premiere Elements installed on your computer besides Premiere Elements 9.0/9.0.1? Also, is this a "it worked before, but now" or "it never worked before" problem?
We will be watching for your follow up results.
Thank you.
ATR

Premiere Pro CC crashes after 'loading media'

Last week I had to swap my media from one HDD to another.
When next loading up the project Premiere crashed right after the 'loading media' bar was complete.
No panels or anything opened up like expected. And premiere became completely unresponsive.
I went back to using the origional HDD but I still had the same problem.
My soultion was to create an entirely new project and import my media again.
Today the same thing has happened except I never moved the footage off of the HDD.
The second project now hangs after 'loading media' too.
Other projects where all the files are on my internal HDD are fine.
Ne error report is generated and I have a small chance of being able to open task manager to shut down Premiere. Usually I have to pull the plug to turn it off as it seems to be using 100% of my Disk usage.
Everything is up to date (6.0.5) and I am running Windows 8 (sorry not sure what information you need :/ )
Any help would be hugely appreciated!

Hi,
Go to the below link and try to update the intel HD 4000 drivers.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22605
Regards,
Vinay

Premiere hangs randomly when loading media from Canon 5D Mark III

Premiere 5.5.0 hangs when loading media. When I drag like 20 files from explorer to Premiere, it loads some files, but at a random point it stops loading and freezes. I loaded every file manually by using ctrl-I within Premiere and saving regularly. After loading a random number of files (anywhere between 1 and 7) it freezes. I managed to get all the files into the project. Now when I try to open the project, it freezes randomly while loading the media. I copied the project and when I open the new one, it opens normal and asks where the media is. When I locate it... same problem, anywhere during loading it might freeze. When I cancel it, I can manually link every media file back, with the random risk of freezing.
I reinstalled Quicktime without any improvement.
I reinstalled Premiere without improvement.
In old projects sometimes random media-files are not linked. Sometimes I can link them succefully. Sometimes it freezes when I try to link them.
As far as I can tell this only happens to .mov files and not other types of media-files.
Sometimes when I have been working on a project succesfully, Premiere still freezes when I close it.
UPDATE
I found out that this only concerned movies from my Canon 5d Mark III. I searched if other people had the same problem and found this thread: http://forums.creativecow.net/thread/3/923736
The solution is to rename the extensions from .mov into .mpg.
This solves the issue...

danielschweinert wrote:
Does somebody else has this problem?
Yup: I heard about it just today, in fact. An FCP user was trying to get Cinema Tools to conform 24fps footage from a Mk II and Mk III to 25. No problems with the Mk II footage, but no luck with the Mk III footage.
Now, it could be just coincidence. But if you don't believe in coincidence, you might think that there's something screwy with Canon's new codecs for the Mk III. "Screwy" is a highly technical term, by the way.

I just recently upgraded to Mavericks. Why does it take awhile to load messages in mail after I click to open them?

I just recently upgraded to Mavericks. Why does it take awhile to load messages after I click to open them?

I should have put more info with my question. Anyway, I regularly use Seamonkey with its built-in mail client because it works so well. I also can use the Yahoo site's mail feature and the mail also goes out instantly once I click on the send button. Only Mail takes up to 32 seconds to send out a mail. I watch the spinning wheel churn until the whoosh sound comes. Not acceptable, that is why I use Seamonkey. Another iMac in the house shows the same low level of performance sending out the mail from that computer, and that computer uses the ultra-fast Comcast internet while my computer uses the AT&T land line. I tried changing some of the settings, like changing the port numbers to no avail. I returned to the recommended AT&T port setting. Since I have never been able to get Mail to work the way I want it, I switched to Seamonkey, but have always been curious as to why it wants to take so long. I like Safari as the browser a little better, but will use Seamonkey because it has it all and works the way it should. Unless a cure for that elongated wait with the outgoing mail is found, I will have to stay with Seamonkey.

Adobe DPS: unable to load media after video montage.

Hi there,
I am currently using Adobe Indesign CS6 with the latest update of the Folio panel and work on a digital magazine in which I imported some videos in different extensions (*.mov and *.mp4).
Everything worked fine on iPad, but everytime I make a video montage using Adobe Premiere Pro CS6, a message error "Unable to load media. Please check your internet connection or try again later" appeared on my iPad screen.
I exported my media from Adobe Premiere in *.mp4 using H.264 codecs for Apple TV/iPad/iPhone, dimension 1280 x 720 and also tried with 1024 x 768, but that didn't work.
Then, I imported my original videos without any montage making on DPS, they work fine. One of the original video has an extension *.mov and the other one *.mp4.
I followed the steps that I read on DPS forums by some users facing the same issue, but that didn't make good results.
So, is there anything I have missed in Adobe premiere Pro CS6 as after making video montage, my iPad always displays the message error? and why each time I use the same two videos without passing through Adobe Premiere, I can play the video without trouble?

I tried both softwares Handbreake and Adobe Media Encoder CS6 to render my final editing but it always failed.
However, I restarted my whole video project using a free easy-to-use video editing software I downloaded from the internet, now it works fine on ipad with *.mov extension.
By the way, Adobe Indesign does not support *.m4v.
Anyway, I will go on trying to figure out what's the flaw in Adobe Premiere Pro.
Thanks anyway _Felipe!

Latest Premiere and Media encoder CC update shuts down

Latest Premiere and Media encoder CC update shuts down when you load saved file or try to export to media encoder.
I tried restarting after update, next is to revert to previous version.

Every time I've try to export from Premiere Media Encoder gives me this error message that says: Installation error - please ensure this product have been installed properly.
I can't find a way to only reinstall media encoder from CC
It was working fine before the last Premeire update.

Premiere and Media Encoder will will no longer export my edit to any file format.

This is on a Windows 8.1 PC.
The edit exported fine until I made one big mistake.
I created a Nested Edit to make a quick alteration.
Since then the following is now the case and I cannot go back to an earlier edit to fix this.
Premiere and Media Encoder will will no longer export my edit to any file format. Using either the Export Option or Media Encoder. Get a dialog that says "Unknown Error Compiling Movie"
There is nothing wrong with my footage. This edit worked fine and I export through Media Encoder many times until I made a Nested Edit within the Premiere Project.
I have tried all sorts of searches on the net for a fix to this but nothing seems to be current or indeed works.
Any help would be appreciated as this is a show stopper.

Thanks for the reply Mark, appreciated.
I have found a work around but it still leaves a long term issue for Adobe to fix.
As to your first solution:
1). The nested edit is already in its own timeline panel. It will not export or encode via media encoder. This is the problem.
2). I will try the KEM roll feature but I have a work around see following.
3). No I do not have a nested edit within a nested edit.
I did a lot of research on the net on this issue as it happened to a colleague of mine on his machine about two weeks ago. It took me six hours to get a fix and in his case there were six video clip that had read errors. When I overwrote those clips from the original backup master it fixed the problem. However I was never able to use Media Encoder again to export his project without it failing. I could only use the Export feature. Again he had used a nested edit in his project.
I my case I do not have any nested edits within a nested edit. All I did was drag my main edit onto the New Sequence icon at the bottom of the Project Bin. This of course created a nested edit in a new Timeline Panel which is what I wanted. I then slid the entire nested edit to the right in the timeline by two seconds as all a wanted to do was add two seconds of black at the head of the edit. That was it. From that point of creating the nested edit Media Encoder and the Export option failed every time with the fore mentioned error.
The final work around was one of those I found previous mention of during my research. I created a new clean Premiere Pro CC 2014 project, I then used the import option under the file menu. I imported only the original main edit which brought in that edit along with all the required footage. This would then export to disk using the Export feature. However, Media Encoder will still not encode this new edit, it fails the same way every time, 'Unknown Error Compiling Movie'.
As a test I loaded the old corrupt edit project back up and deleted the nested edit sequence completely and re-saved it. This had no effect and did not fix the problem. This particular project file will no longer export directly or via media encoder at all no matter what I do.
This seems pretty serious to me. I worked on this edit for a whole month without issue, encoding out roughs as a went without any issue, it was only yesterday after I made the nested edit that the project file is now useless as it will not encode out at all. Yes I have a work around and was able to salvage my project and get it rendered in time for my deadline but the fact I have a partially working Project that Media Encoder will not touch does not instill me with confidence for long term use of Premiere Pro if this is going to happen again.
Is there some place I can send this project file to Adobe to see if they can find out what is wrong with it? I am not the only person having this issue I have seen other post going all the way back through CS6 it seems.

Opening all projects freezes Premiere with Media Pending

Hi there,
I've run into a problem with Premiere Pro CS6. Last week, I experienced a crash while working on a project, and ever since then I have been completely unable to open ANY of my saved projects.
Whenever I now try to open any saved project - regardless of whether it contains any footage or not - Premiere immediately freezes unrecoverably. The same thing happens with newly created projects. If the project contains video footage, the 'Media Pending' preview shows on the frozen page - if there is NO video footage in the project (which would be rare, obviously), then it just freezes without the Media Pending message.
I can, however, open a previously saved project by opening Premiere, creating a NEW project and importing an old project or sequence into it. Using this method I am able to encode one video at a time. I can not use Adobe Media Encoder to queue up video sequences for encoding - Adobe Media Encoder also crashes (freezes) whenever I attempt to start the encoding queue.
Steps attempted to resolve this issue (all unsuccessful);
Uninstalled the Adobe Master Collection CS6 completely, followed by a reinstallation. No change.
Uninstalled every Adobe application on the computer, then deleted every remaining Adobe directory I could find - including those contained in Program Files, Program Files (x86) and in my user profile directory. Also emptied my Media Cache folders. I also then ran the Adobe Creative Cloud Cleaner Tool and removed everything it would allow me to from CS6 and below. Followed by a reinstallation. No change.
Both of the above installing back without any patches (Premiere CS6.0.0) and with patches (Premiere CS6.0.5). No change.
Emptied the 'Temp' folder for my user profile. No change.
The one slightly useful thing that I have found is that if I create a new user account in Windows and open Premiere from there, everything seems to be fine - so the issue would seem to be related to my Windows user account ... I just don't know how to fix it.
I do not want to simply eraze my current user account because it would take me ages to restore all of my preferences, applications and whatnot to their correct configuration - and there's no guarantee that the same thing wouldn't occur again (especially given that I've seem similar reports from other people, so it's not an isolated incident).
Other than Premiere and Media Encoder, I'm not aware of any other Adobe application suffering from a problem.
I'm running Windows 7 Pro, SP1, incidentally. Thanks in advance for any help or insight anyone can provide.
Crash details, for what it's worth:
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name:    AppHangB1
Application Name:    Adobe Premiere Pro.exe
Application Version:    6.0.5.0
Application Timestamp:    5211d7f5
Hang Signature:    23a7
Hang Type:    0
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    2057
Additional Hang Signature 1:    23a73802a238152cdf9b7274c7d644c6
Additional Hang Signature 2:    d9ce
Additional Hang Signature 3:    d9cef6fa29ffb9c7a521dae6910c7825
Additional Hang Signature 4:    23a7
Additional Hang Signature 5:    23a73802a238152cdf9b7274c7d644c6
Additional Hang Signature 6:    d9ce
Additional Hang Signature 7:    d9cef6fa29ffb9c7a521dae6910c7825
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

The user profile may well be damaged, but it's pretty difficult to Google user profile faults when the only applications displaying any symptoms whatsoever are Premiere and Media Encoder. Add to this the fact that there are numerous other reports of the same thing having happened to other Premiere users for a range of reasons (including font conflicts and external or virtual drives). Also, the issue materialised not at an undetermined time - but precisely when Premiere suffered a crash, in use. It would be irrational to rule out the possibility that something external to Premiere could have caused the crash, but whatever has been damaged would seem to be directly related to a resource that Premiere was using at the time. Identifying that specific resource would be invaluable.
Anyway, this is all pretty moot now - I'm in the process of setting up a new profile. I'll just have to hope that it won't occur again. I would like to have spent some time trying to identify exactly which aspect of the profile was affected, but sadly time is an issue.
If anyone else is experiencing similar symptoms and stumbles upon this thread, they might want to look at this: http://forums.adobe.com/message/4323738. It didn't help me, but maybe it'll be of use to someone else.
Also worth considering is the possibility that external drives, virtual drives or virtual file systems have also been reported as causing these symptoms (for example, I'd used a Linux file system integrator/emulator some months ago - not that this had coincided in any way with these issues for me).
Thanks for taking the time to respond, Jim.

ORA-27211: Failed to load Media Management Library after Update to HP DP 6

Hi,
after an Upgrade to Version 6.0 from the Backupsoftware HP Dataprotector i can't run RMAN Backup's anymore, because something is wrong with Linking of the MML.
BS: SLES 8 / Kernel 2.4.21-251-smp
Oracle: 9.2.0.5
I try this RMAN Statement:
RMAN> run
2> {
3> allocate channel 'c1' device type sbt_tape
4> PARMS='SBT_LIBRARY=/opt/omni/lib/libob2oracle8.so';
5> }
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on c1 channel at 10/22/2007 16:04:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
the tracefile (i try RMAN Test with and without PARM Parameter):
Dump file /u01/app/oracle/product/9.2.0/rdbms/log/khv_ora_11745.trc
Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning option
JServer Release 9.2.0.5.0 - Production
ORACLE_HOME = /u01/app/oracle/product/9.2.0
System name: Linux
Node name: dbtheresien3
Release: 2.4.21-251-smp
Version: #1 SMP Thu Sep 23 17:22:54 UTC 2004
Machine: i686
Instance name: KHV
Redo thread mounted by this instance: 1
Oracle process number: 35
Unix process pid: 11745, image: oracle@dbtheresien3 (TNS V1-V3)
*** SESSION ID:(72.47988) 2007-10-22 15:53:24.684
Failed to load SBT library libobk.so
*** 2007-10-22 15:57:35.736
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
*** 2007-10-22 15:58:16.009
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
*** 2007-10-22 16:02:46.904
Failed to load SBT library libobk.so
*** 2007-10-22 16:04:24.761
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
All Infos i found tells me:
- that i doesn't need to restart the Instance of the Database
- i must only remove the old link in $ORACLE_HOME/lin/libobk.so and take a link new link $ORACLE_HOME/lin/libobk.so to the new Backuplibrary in /opt/omni/lib/libob2oracle8.so
But this doesn't work!
Any usefull Hints?
I always try the RMAN Command's:
CONFIGURE DEVICE TYPE 'SBT_TAPE' CLEAR;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' clear;
Nothing help...
My last Idea ist to reboot the whole Database, but this is a little difficult 8-)

hi,
all Systems are 32 Bit (Database Oracle 9.2.0.5 and DP6.0).
What do you mean with "what is Version DP6" ?
HP Dataprotector 6.0 with Patch DPLNX_00013
thx
Thomas

Multi-Cam Performance Comparison of Premiere, Vegas, Media Composer and EDIUS

The video below provides a comparison of Multi-Cam performance of the following video editors
Adobe Premiere
Sony Vegas
Avid Media Composer
Grass Valley's EDIUS
The following summarizes the results. See the video for all the details. In the lists, 1 is the best.
Playback Performance
Vegas
EDIUS
Premiere
Media Composer
Ease and Flexibility of Setup
EDIUS
Vegas
Premiere
Media Composer
Full Screen Playback
EDIUS
Premiere
Media Composer
Vegas
Multi-Screen Friendliness
EDIUS
Premiere
Vegas
Media Composer

Well, I've come up with a terrible, but comical solution for the second issue which doesn't involve reworking anything. It turns out that, upon launching premiere, I can play the master sequence with nested multi-cam sequences a grand total of ONCE with minimal delay. If I stop the play through, then it will take 3-4 minutes to get the sequence playing again. Of course, the Premiere decides to hang when I try to close it after playing this master timeline, so I'm finding that I can inch my way through this project by (1) launching premiere, (2) playing the master sequence, (3) make the edits I need, (4) forcibly crash Premiere, and (5) relaunch Premiere and repeat. It's a terrible way to work, but the project is so close to completion that I'm willing to suffer through it.
As to issue 1, I've taken each offending clip, extending the audio track one or two frames in the beginning of each clip, and then use those frames to ramp the volume up from silent to 0db. This seems to avoid the brief moment of distortion at the beginning. Notably I did try your suggestion by going back to the original, source audio, but I was still getting the same issue. My work-around is the only solution I've been able to come up with.

Why does the color wheel appear when i ckick on something abd takes awhile to go away

content://media/external/file/1892
why does the color wheel appear when i ckick on something abd takes aabd takes awhile to go away

All about the Spinning pinwheel [Beach Ball of Death] - Wikipedia - ÇÇÇ

My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

"Error loading media. File Could not be played" when trying to view streaming media on only some sites. How to fix?

Hi!
I've been having a problem trying to view streaming media, but it only happens on some sites. It's similar to a problem I have on my Windows PC, that's related to Adobe Flash, but since I'm very new to using my iPad Mini, I don't even know if Apple devices have Flash...do they?
Anyway, when I go to a site that's plagued by this issue, I tap the 'Play' arrow on my screen & the circle spins like it's gonna play, but then the screen turns black & this error message appears:
"Error loading media. File Could not be played" followed by a triangle with an exclamation point !
I read several articles online & the solutions ran from updating firmware in their router, (mine is brand new...installed last Thursday), to disabling ad-block programs in their browsers...(I don't have any enabled), and the last one was making changes to the DNS...(I know it means 'domain name server', but I don't have the foggiest idea how to make changes to it!
Anyway, that's my problem. I hope that someone out there knows what I can do to fix it!
Thanks in advance for your help.
K-9Pal

I would assume an issue with the HTML5 media player.
If those aren't working on Windows then it is possible that the proper codecs aren't installed.
You can try to disable the HTML5 media player and make Firefox use the Flash plugin.
You can do this by setting these two prefs to false on the <b>about:config</b> page:
*media.windows-media-foundation.enabled
*media.directshow.enabled
See also:
Windows Media Feature Pack for Windows 7 N and for Windows 7 KN:
*http://support.microsoft.com/kb/968211 - www.microsoft.com/en-us/download/details.aspx?id=16546

Premiere loading media.... takes awhile.

Similar Messages

Maybe you are looking for