Premiere/Media Encoder Crashing/Inconsistent

Hello,
I am rendering a 75 minute long feature film timeline. It is a 4kHD timeline with mixed RED and 1080p content.
At first I was using CS6 but everytime I would render in media encoder it would crash. No matter the preset. I tried clearing the cache and so on but no dice.
I then updated to CC and after opening and converting the project I sent it to render. It had a new cache location and was still conforming files while rendering but it completed the entire 75 minute timeline in just under 4 hours. Rendering a 1080p h.264 Blu Ray. That was awesome.
The next time I tried to render the timer kept counting up... starting at 3 hours, and after ~4 hours it was indicating 30 hours remaining. Then it crashed.
I then cleared my cache again, and unplugged the two RAID drives I use as Cache. This forced Premiere CC to default my cache to the C: drive and it reloaded all the media and conformed audio. I sent it to render and it completed it in just under 4 hours again. awesome.
So now I have my final version. It is due tomorrow. I have a clean cache again on my C drive. I send it to render and it is 18 minutes in with the timer still climbing up, indicated 19 hours currently. So same as before. I have rebooted, cleaned cache, saved a copy of the project and re-opened and deleted the AME preferences. I have also tried rendering direct out of Premiere (crash after conforming audio)
So I'm probably going to miss my deadline and beyond frustrated. I know my system can export this in under 4 hours as it has done it before, but maybe 1/20 tries and now it seems I have hit a wall. Super stressed.
Using Premiere and AE CC. System is a X79 based i73930k. Windows 7. No overclocking or any of that business. Watercooled and temps are fine (65c on CPU). Has a GTX 680 and a GTX 660. C: drive is a 512SSD, also has an internal 8tb RAID 0, 2 external RAID 12tb drives and so on.
Any ideas?

still conforming files while rendering
Better not to do that. Let all conforming finish before sending it to export.

Similar Messages

Premiere/Media Encoder crashing EVERY time I try to export project.

Many of you have encountered similar issues, and I've scoured the forums with no resolve to my specific issue. Crashing every time I go to export in Premiere or ME. Using latest versions of both through CC--8.2
On Windows 7, I've looked into the AppData/Roaming/Adobe/Media Encoder/<version #> solution--that folder is empty. Don't know why. Hidden files are turned on.
Specs: Intel Core i5-4570 CPU @ 3.2 GHz
Ram: 8 GB
64 bit Windows 7
Trying to export to H.264 --> .mp4
This error message pops up roughly 75% through the process (Note: It's roughly around the same time there's a video transition effect in the project, if that counts for anything. Not sure it would, as I completed a project with at least 12 transitions last week, albeit much shorter than this one. 3 mins vs. 1 hr).
Yes I'm using OpenCL.
Someone help.
Thanks.

No, just that something went wonky with that one. Try the Film Dissolve instead. If that also has a problem, then it might be the clips and not the transition which is the cause.

Media Encoder crashes when exporting from Premiere Pro

Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
Any idea why Media Encoder will crash?

Try turning off GPU acceleration.

Premiere Pro, Media Encoder Crashing When Exporting/Rendering

For the longest time if I ever tried to export or render a video longer than 5 minutes, my Premiere Pro or Media Encoder crashes. I don't know why but it is EXTREMELY irritating when attempting to make lengthened gaming videos. I have tried 15 different methods all online, to no avail. It always crashes around the 40% mark in Adobe Premiere and it isn't a corrupt project. I have literally tried everything to no avail and I finally decided I would turn here to ask for help. I reset the preferences, tried copying and pasting into a new sequence, tried reinstalling Premiere... the whole bit. My technical specifications are not the issue at hand I don't believe, but just in-case the list is provided below. Please make any response swift, my intent was to upload the video I have in Premiere by tonight!
Technical Specifications:
OS Name
Microsoft Windows 7 Home Premium
Version
6.1.7601 Service Pack 1 Build 7601
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
FRITZ-PC
System Manufacturer
MSI
System Model
MS-7821
System Type
x64-based PC
Processor
Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz, 3400 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date
American Megatrends Inc. V1.1, 5/3/2013
SMBIOS Version
2.7
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume1
Locale
United States
Hardware Abstraction Layer
Version = "6.1.7601.17514"
User Name
Fritz-PC\Fritz
Time Zone
Eastern Standard Time
Installed Physical Memory (RAM)
8.00 GB
Total Physical Memory
7.95 GB
Available Physical Memory
5.97 GB
Total Virtual Memory
15.9 GB
Available Virtual Memory
12.4 GB
Page File Space
7.95 GB
Page File
C:\pagefile.sys

Some general questions/ideas...
More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
What are you editing?
Codec & Format information, read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to find file information for PC/Mac
Have you tried the NEW ITEM process to insure your sequence matches your video?
See a link on page #5 at http://forums.adobe.com/message/2276578
And, finally, for shutdowns, you MAY have a hardware heat problem
Read Bill Hunt on BSOD shutdowns http://forums.adobe.com/thread/772169
-win32k.sys BSOD http://forums.adobe.com/thread/1404938?tstart=0
-and an Encore fix http://forums.adobe.com/thread/1060443

Media Encoder crash in Windows 7

I just finished building a new machine to take the place of my old one. I'm using CS4 Master Collection. I don't use the video tools a lot but last summer I put together a presentation using Premier and created an avi file from it using Media Encoder. I worked on this for a couple of months and it always worked fine.
Well a coule of days ago I decided to see how fast things would run on my new box so I ran the same project. I opened it up, clicked "export" and then "media" (I think that's it, I don't have it up and running at the moment). Media Encoder opens up at that point. About 20 seconds into it, my computer crashes and reboots. No BSOD, no freeze up, just pow, shut down and restart on its own. I've tested this a few times and even chose mp4 output to see if that made a difference. None. Same deal. One time when I opened up Premiere the whole machine froze but mostly I can get to that but Media Encoder crashes the system.
I read that this was a problem in the RC days of Windows 7 but I figured the Adobe updates would have handled this by now (I did run the update so everythings current - CS4 and Windows 7). I've run several stress tests (Prime95, memtest, furmark, etc, including thorough drive tests with WD diagnostics) before loading up my programs and done a lot of stress testing after that too. in fact I'm running Prime95 now and no problems.
What's going on with this? Anyone know? (I want to submit this to Adobe bug support as well but can't find a link for that)
Here's my system:
OS = Windows 7 Ultimate 64 bit
Motherboard = GIGABYTE GA-X58A-UD5 (BIOS v 5)
CPU = (1) Intel Core i7-930 Bloomfield 2.8GHz LGA 1366
RAM = (12GB total) CORSAIR XMS3 6GB (3 x 2GB) DDR3 1333 (PC3 10666) 7-7-7-20 Model TR3X6G1333C7 G
Cooler = Noctua/XION NH-U12P SE2 (2 fans)
Video = (1) EVGA 512-P3-N871-AR GeForce 9800 GTX+
Sound = HT | OMEGA CLARO Plus+
Case = LIAN LI PC-P80 or PC-A77F
PSU = CORSAIR CMPSU-HX1000
Storage = (2) Intel X25-M 80GB SATA II MLC SSD RAID 0 (on the Intel controller)
Storage = (4) yet to be determineed HDD's (probably going to use WD7502ABYS) RAID 10 (on the Intel controller)
Storage = (1) Western Digigal WD1001FALS 1TB HDD for my DVDs
Storage = (1) Western Digigal WD5001AALS 500GB HDD partitioned in 3 parts for clones of the OS drive in case of emergencies (this is in addition to clones and backups that are on spare drives outside the box)
Optical = (2) LITE-ON DVD Writer - Bulk - Black SATA Model iHAS224-06

Mea Culpa.
I misread the big 7 as meaning PR7. Sorry to mislead you and to have misread your post.
It could be a myriad of things, but look at the second link in this link: Some suggestions...
There is some info requested, like Process Explorer (not Task Manager) and DXDIAG. Maybe that will shed some light, but temps and voltages are the first suspects.

Premier Pro CC and Media Encoder crashing on long file export.

Please forgive the length of this inquiry. But it is complicated and has a lot of variables.
I have an hour long mixed format timeline both Red 3K footage and Black Magic ProRes 1080P footage that I want to make a DVD from and it takes forever and crashes half way through. I have tried doing it every way possible and the only way I was able to get even a partial export was using the "MPEG 2 DVD" export option in Premier CC. It goes fast at first telling me it will take about 2 hours but even though it starts quickly doing about 15 fps it slows down to less than 1 fps and finally just stops and crashes my Cuda Core enabled Macbook Pro Laptop.
I really don't know who to ask about this since there are so many different variables. I never had a problem like this on my MBP with PP6 on a 4K timeline exporting to DVD or Blue Ray or to H-264 or Even Prores. But I wasn't mixing formats either. But on this project the first 20-30 minutes of footage goes through fine in a couple of hours but something seems to be bogging down the system on longer projects. My work around was to break the project up into multiple exports and combining them on the DVD timeline but I can't do this on every project. I thought maybe it was a corrupted clip somewhere in the timeline but when I broke the timeline up into several parts I had no problems.
I did notice a dramatic variance in the time it took to export footage based on the sequence settings. A one minute timeline comprised Red 3K footage and ProRes 1080P footage Here are some sample export results:
From a Red raw 3K timeline 2880x1620 with 1080P Prores footage upscaled 150%)
to .m2v Mpeg 2 720x480 format    1:48 Minutes ***
to .mov Prores 422HQ 1080P                         22 Minutes
to .mov H.264 1080P                    22 Minutes
to .m2v Mpeg 2 1080P                                                22 Minutes
From a 1080P timeline Prores footage at 100% (Red footage downscaled to 67%)
to .m2v Mpeg 2 720x480 format                         13 Minutes
to .mov Prores 422HQ 1080P                             13 Minutes
to .mov H.264 1080P                                                             14 Minutes
to .m2v Mpeg 2 1080P                                                            14 Minutes
Since I am going to DVD, I chose the fastest option Red to m2v Mpeg 2 720x480 format which only took 1:48 per minute. Why? I have no idea. Maybe someone here knows the answer. But again these numbers are for a ONE MINUTE clip when I tried to convert the whole hour timeline to the 720x480.m2v DVD File the Red timeline froze my computer after several hours even though I had set sleep mode to “Never” and turned the display off manually and I had to convert it in multiple chunks. In 20-30 minute chunks it did go fast about 1:48 per minute like the test indicated. But I would like to be able to convert the whole hour and not to have to try to stitch the clips together in my DVD authoring program.
I don’t want to have to avoid using multiple formats on the same timeline or waste time transcoding everything to the same format.
Can anyone give me any suggestions as to why the computer is crashing or bogging down in long exports and what timeline settings I should be using?
I have plenty of room on my Scratch Disk and 8 Gig of RAM and according to my Activity Monitor during the export process have about 800 Meg of System Memory during export but the CPU Usage is 98% and in my Activity Monitor I see under “Process Name” ImporterRedServer flashing up at the top of the list about every second during export.
Why .720x480 mpeg DVD setting is so much faster than all the other export codecs?
And if there are any other settings I can use to get higher speed exports in HD? 14x1 seems a little slow especially since every time it crashes I have to start over.

Hi,
Since a long time I did not encounter the crash of Media encoder with
long file export.
But I take care of a lot of details before the export :
- clean up Media cache and Media Cache Files within PP CS6 and/or CC,
- delete all render files with Preview Files,
- rendering of sequences until the rendering is completed,
- PP CS6 and/or Pp CC opened during export to AME and/or Encore CS6,
I guessed to leave Adobe but this company remains the last with a
serious authoring software (Encore CS 6).
I tested :
- Avid Media Composer, Final Cut Pro X, both are very good software but
no really authoring software for these video editing softs.
Th only way is to "flood" Adobe with "bug reports" and "wish forms"
which are not very easy to use.
And also to call the Adobe support day by day until they send they
escalate the bug.
Le 16/05/2014 16:51, alainmaiki a écrit :
>
      Premier Pro CC and Media Encoder crashing on long file export.
created by alainmaiki <https://forums.adobe.com/people/alainmaiki> in
/Premiere Pro/ - View the full discussion
<https://forums.adobe.com/message/6384665#6384665>

MEDIA ENCODER crash error: c:ame820_win\releases\external\adobe\mediacore\mediafoundation\api\ PLEASE HELP

WORKSTATION HP Z600
XEON E5645 12GB RAM NVIDIA QUADRO 2000 WIN 8.1 64bit
BLACKMAGIC DESIGN ULTRASTUDIO SDI
good morning,
I have some problems with premiere pro cc 2014 release 2
the most important is that Media Encoder crashes and the following error:
c:ame820_win\releases\external\adobe\mediacore\mediafoundation\api\
The second problem is that when I open the software you group all the windows on one side.
Does anyone know what I need to do to solve these two problems?
please help
Andrea

I do have a 64 bit OS - Win 7. The RAM does provide a noticable difference in performance - things are much more "snappy" now, which I'm enjoying, but hasn't eliminated my problem.
The encoder does not stop at the same point, it seems to be quite random. I can view the files that I've exported (up until the point they cut off) and there's nothing going on in the clip that would be any sort of red flag - in other words, it is not stopping the coding at a point where a new color correction or title is being introduced, it had all happened previously. This is my first large project on CS4, and I don't have anything else to export at the moment!
I'm not running premiere in multi-monitor mode: I've got a 24" widescreen monitor that is my sole monitor.
I have COMBED the interwebs trying to find a resolution to this issue, and I am no where... I'm currently installing CS4 on a XP machine that I have that is pretty robust, and am going to try encoding on that, just to see if I get a different result.
Any suggestions at all would be MOST appreciated!
Thanks!

Premire Pro CC 2014 and Media Encoder Crash During Launch

Premire Pro and Media Encoder crash during startup and are unusable. I am using Windows 7 Ultimate and already tried reinstalling Adobe Creative Cloud from scratch and it's still happening. I also tried following Adobes KB articles directions to rename the Adobe folder in my documents and appdata to no avail. When I try to launch either application, I get a generic windows crash message "Adobe Premire Pro CC 2014.0 has stopped working" and when I click problem details, it lists this:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 8.0.0.169
Application Timestamp: 536f4f89
Fault Module Name: ImageRenderer.dll
Fault Module Version: 8.0.0.169
Fault Module Timestamp: 536f2c18
Exception Code: c000001d
Exception Offset: 00000000001f5382
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0b2d
Additional Information 2: 0b2df4702c3fc6489bf922fb8e966350
Additional Information 3: fa9f
Additional Information 4: fa9f59f642d335ee71c6667e52000d39

I am having a similar problem.
Premiere Pro CC 2014 suddenly decided to crash every time I export to either Adobe Media Encoder or within Premiere itself.
The encode will usually go for 5-10 minutes before the programs either spits out a "serious error has occurred" window, or it just sits there frozen until I force quit.
I did find a work-around for the moment. If I open AME and FILE > OPEN, select my project and then the sequence I want, AND put it in Software render mode, it will work.
My timeline is 2K, 58 minutes in 23.976
Only effects applied are Lumetri LUTs - no third party.
I've exported as recently as a week ago without issue.
Running OSX 9.5 on an X99 board
3.75 GHz 8-core
64GB 2400 MHz RAM
EVGA Titan Black 6GB
Because I can get my renders out, I am not too concerned. Either there is something wonky with my timeline that screws with any graphics enabled rendering, or there is a bug that is have the same effect. I will try rendering on another of my edit bays that utilizes a GTX 580 that I KNOW works. The Titan is pretty new to my workflow.
Thanks Adobe, for checking this out.

Adobe MEdia Encoder Crashes with big files inputed

Hello,
There isn't a forum for the Adobe Media Encoder, so I thought this would be a good spot. I am an after effects and Premiere user who likes the idea Adobe seems to have of using the media encoder to cover all my encoding needs.
My typical workflow, especially since these days I'm doing more shorter form animations, is to render out to a Quicktime Animation codec file as my main archive file. From there, output all the various different web versions, flv, etc from that core archive file. Since my projects usually aren't running more than 5 minutes, this leaves me with a nice 3 - 7gig file.
Problem: I'm running CS4 and the media encoder crashes when I input files that are in this file size range. The program locks up when I push start que, and then eventually crashes. Works fine with smaller size files that are about under a gig.
I can run a render out of after effects, which seems to be more stable. But I'd love to be able to use this great new tool.
Here's my machine specs if it helps:
PC
Intel Quad Core Q9550 @ 2.83 ghz
4gB RAM
Windows Vista 64 bit ultimate
All updates current for CS4 apps as of 01/30/08
Running Adobe Media Encoder V 4.01.078
Hard drives are nothing special. 7200 rpm western digital internal and external. I've tried all sorts of hard drive configurations, where the input is coming from, where it's going, etc. No difference.
I have been experimenting with using Lossless AVI's as my "uncompressed" archive file. Works well, but same crashing with the Media Encoder.
Also tried experimenting with frame size alterations during encoding, no difference there. Also, whatever the output codec is, be it FLV, H264, etc. no difference.
Anyone have any thoughts or have experienced similar issues? I hope all my MAC friends aren't right, seems like all my attempts to streamline my workflow with this CS4 and beefy PC combo are crashing and burning.
Anyone else feeling this pain, or have recommendations?
Thanks,

Thomas, thanks for your suggestions on Vista optimization. That Sheer Codec looks nice, but hard justify the cost when I've been working for years with essentially uncompressed codecs that work well. Will play more though to see if the cost would actually pay off in the long run though.
In general I made a decision that it was too early to throw in the towel on my old uncompressed codecs. The Quicktime animation codec has always been for me the safest, most universally accepted, and most reliable "uncompressed" codec. It's always worked in the past, not gonna give up just cuz media Encoder CS4 has troubles.
Mylenium, thanks for the reminder about the silly platform wars. I've always felt the same as you, but when I'm stressing sometimes the silly propaganda can get to me. Makes me forget that no matter what system ya got, it never works perfect!
Here's an update. I have trying my best to learn more about the bug and have come to some interesting realizations. The AME does work with larger files, just not the larger files that I had been using at the current moment. Older files of mine as big as 20GB can be inputed into AME with fine results.
This being said, it scratches out most of the RAM overload thoughts with AME.
The difference with my current files that were causing AME crashes: larger than a few GB, came from AE, had the 1.21 pixel aspect ratio metadata.
When I re-interpreted the file in AE into a square pixel aspect ratio, exported it, it was then successfully inputed into AME.
I have read just now that there were changes in After Effects widescreen pixel aspect ratio interpretation in CS4. Can this change be causing problems in my AME. Not positive, but I'm now thinking after many days of testing that the bug could have its roots somewhere in this ball park.
If anyone from Adobe is reading this, I would love any ideas you might have on this issue. In general, there is really no support for the Adobe Media Encoder itself. This is not good, considering how it is so necessary for AE and Premiere users like myself.
Thanks,

Media Encoder Crash on Launch- ?

Media Encoder crashes on launch. It's a brand new install on a MacPro 3.1 with a brand new MacOs10.8
It runs through the list of plugins and resources that it loads with the Logo Screen but halts and crashes on loading CoreAudio...
Please help?
In desperation I deleted it with the hope to re-install, but can't seem to find an option for the install through Cloud...
Thanks!

Stumbled across this at around 3am today while still troubleshooting. Sad to see no new replies yet. I'm having the same issues as well FireTrigger. (and, at a new job to boot, my employers are starting to wonder if I'm worth my salary at this point, haha!)
Fresh install of 10.9 with CC - AME crashes on startup with a coreaudio issue on thread 0.
Fresh install of 10.9 with CS6 - same deal
Fresh install of 10.8 with CC - same deal
Fresh install of 10.8 with Cs6 - same deal
Seems like it's a permissions issue, as from the error report, it looks like it's trying to create a folder (or write to one maybe) for coreaudio.
Tried trashing and resetting prefs. No good.
Tried resetting PRAM. No good.
Log out of CC, log back in - No good.
Unistall, reinstall, retry - No good.
Reboot, check for updates, etc., you name it. - No good.
Repaired permissions with disk utility and Onyx - No good.
There's no plugins, no other software, no installed fonts aside from system standard fonts. This is a completely empty install of OSX with Premiere on top of it.
I've wiped the whole machine out and re-installed on a clean drive about 10x now, no luck, same issues across the board.
The hell of it is that I dont even need AME for my workflow, but because it's obviously broken, I can edit a job inside of PP all day long, but there's no way to export it, premiere crashes
System specs:
Mid 2010 MacPro
12 (2x6 core) Xeon 2.8GHz
48 gigs crucial ram
ATI Radeon 5870 1GB
1TB WD internal (stock)
3x 3TB seagate7200rpm internals.
My next steps in troubleshooting = going to yank all the internal drives and install a fresh, 3TB bare drive and start over, we'll see what happens.
If no luck, I'll move over to testing on a trial copy of PrP CS6 absent the creative cloud if possible. I'm beginning to wonder if that's the source of it all.
I'll report back, and will edit this post with a URL to pastebin with some error reports. Would add now but had to run into the office for some meetings.
Good luck with this one y'all. Really nasty issue here, never experienced anything like this with adobe's stuff, and I've been a power user since CS2.

Premiere/Media Encoder can't render/export after 10.9.3 update. Any Answers?

My computer ran the OSX 10.9.3 update a couple nights ago, and suddenly Premiere/Media Encoder can not export. It just freezes up the computer until I cold crash it. Same if I try to render a timeline in Premiere. This issue just started yesterday. It still persists after wiping my hard drive and doing a clean install of everything, which of course just put 10.9.3 back on there. This issue does not exist on my laptop that has not been updated yet. However, I have enough work and not enough time to be trying to edit everything on my laptop while this get worked out. Has anyone else got this issue in the past day or two?

Hey Todd,
I had two active projects that suddenly could not render/export. One is quite massive and has RG Colorista quite a bit throughout it, however I could not export a timeline without any plugins on it. The other project is also clean of plugins. Then I started a new project and it went out just fine until I put the RG plugin on it. But here is my newest glitch. I just made a change to an old show and all of my titles done in Title Tool were resized and positioned. Blown up and shifted to the right. If I take the same file and put it on my laptop which still has not got 10.9.3, they are just fine. Scaled properly and centered between title safe. But now on 10.9.3 they are blown up and going off the screen.

Premiere & Media Encoder show Quicktime presents but fail on encode

My Premiere & Media Encoder CS6 both show Quicktime presents but fail each time I try to encode directly to Quicktime with .mp4 codec.
Quicktime is installed on my machine, which runs Windows. I'm using Adobe Creative Cloud CS6.
Goal: to use the Quicktime format and sucessfully encode video sequences as .mp4 files at various settings.

BUMP! To this thread as I am still having an issue encoding QuickTime files. Below is a quick recap with some new information.
All testing is done on a system running Windows 7 Professional 64-bit SP1 with Adobe Media Encoder CS6, CC, and CC 2014 (same results across all versions).
The failure occurs after a few seconds of attempted rendering, with only the following message from AME:
"Encoding Failed
Export Error
Error compiling movie. Unknown error."
Important note: This problem DOES NOT exist on a similar system running Windows 7 Ultimate SP1. So it would appear the problem may be OS specific to Windows 7 Professional (although there are a few forum threads with people experiencing the problem on Macs as well).
That said, here's what happens on the Win7 Pro system:
QuickTime movie encoding fails at 1920x1080 both from a dynamically linked Premiere timeline and from a rendered file.
TESTS:
1) H264 video with AAC audio FAILED
2) H264 video with uncompressed audio FAILED
3) Uncompressed video with AAC audio FAILED
4) Sorenson video with uncompressed audio FAILED
5) Uncompressed 10bit YUV .mov with uncompressed audio WORKED!!!!!
Of course, a :30 second television commercial rendered this way is near 5GB and is not the way most broadcast stations want a file delivered.
To sum up: all of the HD presets and custom settings for QuckTime with any sort of compression, fail to render on systems running Windows 7 Professional.
Here is a link to a similar issue, but the solution listed did not work in my case.
Quicktime encoding using x264 encoder failing in AME 6.0.2.81 and Mac OS 10.8.2
Here is a link to the ongoing discussion about this on Creative Cow
PC H.264 Quicktime crash : Adobe Premiere Pro
Any insight is welcome.

For some reason, I can't compile a video or image sequence anymore with Premiere, Media Encoder, or After Effects... All CC

I have been working on a video for awhile now and I've recently noticed that my .flv export format has been removed from my choice of encoders. I export from Poser Pro Game Dev to Png Image Sequence. I organise a cam angle in After Effects...I re render out to a png image sequence.. continuing to hold quality. Then when a scene is done; I use Premiere to export a 1080 by 720 wmv format 29.97. But now I can't encode from Premere, Media Encoder, or Affter Effects. Please ...Any help would be much appreciated.

Hi,
I have been working on a video for awhile now and I've recently noticed that my .flv export format has been removed from my choice of encoders.
Check this for more information: removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro | After Effects regio…
But now I can't encode from Premiere, Media Encoder, or After Effects.
What exactly happens when you try to export?
Thanks,
Rameez

24p to 29.97i in Premiere, Media Encoder or After Effects?

Sorry to bring up a much discussed topic, but as I looked on the web and in the Adobe forums I got sort of lost in the tangle of discussion about how to best take a 24p sequence in Premiere and convert it to 29.97i for broadcast. I feel like this is something that Premiere might be able to do? Or maybe Adobe Media Encoder? I generally see from other forums and posts that this is done in After Effects, an app I have never even opened. So if the answer is that I need to use AE, then I'm hoping for some detailed guidance or perhaps a tutorial video? Though as I say that I know that certainly sounds rather demanding
Any comments or assistance would be greatly appreciated!
Thanks much,
Bradley

Hi,
I have been working on a video for awhile now and I've recently noticed that my .flv export format has been removed from my choice of encoders.
Check this for more information: removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro | After Effects regio…
But now I can't encode from Premiere, Media Encoder, or After Effects.
What exactly happens when you try to export?
Thanks,
Rameez

Adobe Media Encoder crashes when I open a file

Adobe Media Encoder crashes when I browse to open a file.
I have a Creative Cloud subscription.
I have uninstalled and reinstalled the program through the Creative Cloud service. No change.

Thanks for responding.
Yes, I am trying to utilize Photoshop CS (8.0) and I run Windows 7.1. I installed this from Adobe's Creative Cloud. The program opens, and I am able to open a Photoshop file with it, but then Windows tells me that there is a problem and is shutting down. I'm not sure would the problem might be.

Premiere/Media Encoder Crashing/Inconsistent

Similar Messages

Maybe you are looking for