Premiere Pro 1.5.1 HDV VIDEO CAPTURE - Canon HV20

Hi,
For the life of me I cannot get my camera to capture in HDV. I can switch over to DV and it will capture everything just fine. The settings I recorded in are HDV standard, Widescreen 29fps. Not the 24. But it just tells me the device is ofline no matter what I try. I grabbed a stand alone CineForm HDLink and that doesn't detect it either. Any help would be greatly appreciated. The Client wants HD, not DV.
Premiere Pro 1.5.1 HDV VIDEO CAPTURE - Canon HV20 firewire
Thanks in advance!

Ok, I spoke to soon. I kept searching and searching. Finally found this..
http://www.hv20.com/showthread.php?t=12131
My camera was locked in DV mode. So I had to switch it to HDV/DV
"b) As many have said you need to be sure that the camera is set ot output in HDV, and not DV locked. Because I am a bit of a dunce I found it difficult to locate that, even with the manual so here are some foolproof instructions on how to get there:
in "Play" Mode > FUNC > MENU > PLAY/OUT SETUP2 > DV OUTPUT [set this to HDV/DV]"
That did it.

Similar Messages

Premiere Pro Does Not Support Audio-Only Capture For Some Formats, Such As HDV?

In the PPro CS 5.5 Help file under, "Recording audio", it says:
"Note: To capture an audio-only file from a digital video source, choose Audio from the Capture menu in the Logging pane of the Capture panel.
"Premiere Pro does not support audio-only capture for some formats, such as HDV."
I'm shooting in HDV and if I want to capture audio only, would I just need to switch my setting to DV?
The only thing is my Canon HV20's HDV audio is MPEG-1 Audio Layer 2, 16 bit, 48 kHz.
My DV setting is PCM audio, which I think is a better quality format, right?
Would there be any noticeable difference?
Thanks.

Capture your HDV material in the normal way and just drag audio only from the source monitor to the timeline.

Premiere Pro CC won't import video files

Two days ago I used the free trial of Adobe Premiere Pro CC to make a video. Everything was working fine, and I saved the project so I could work on it again later. Today I tried to open Premiere Pro and it told me that my trial had expired and that I needed to buy it. I bought the monthly plan for Premiere Pro CC and opened up my previous project to continue editing. However, when I opened it, all of the files on the dashboard were red and it says "Media Offline". I tried to locate the media files but then a notification pops up that says "Error Message: Format unsupported or files damaged". The video files I'm trying to use are .mov, so it should be working like it did two days ago. It lets me import pictures, but no video. I could really use some help with this, it's a project for work. Thanks so much

Hi bschmus12,
Try this, rename the folder where your media is and then try to relink. Does that work for you?
Thanks,
Kevin

I keep getting this message when I launch PP "Premiere Pro cannot find any capable video play modules"

I keep getting this message when I launch PP "Premiere Pro cannot find any capable video play modules". I've read through a few threads and made the recommended changes but still no luck, it crashes everytime. I have a Mac Pro 2010 with a Nivdia Quadro FX 4800.

Hello and thanks for the response. Yes, I've read that post and many others, I still get the same message when trying to open. I've realized there's no way to get tech support for any of the products I'm using. Is there another place hat can help me with this problem? I really wanted to try PP but looks like I won't be able to.
Thanks

What are the settings for capturing video from Canon HV20

Hi All,
I want to capture video from Canon HV20 with Premiere Elements 11. What kind of settings should I use to capture the video with full information?
Here is what I did:
1) According the manual, I went to Capture settings panel (Edit > Project Settings > Capture) and selected HDV as capture format, because my video is at high definition.
2) In addition, I checked "Capture to Timeline" and "Split Scenes by cotent".
Are these settings enough?
Thanks.

HV20user
Sounds reasonable, using Add Media/HDV Camcorder, but....
Have you reviewed the Adobe write up on Premiere Elements 11 DV and HDV capture firewire into it.
http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b79-ABF6-E9E75F498DB2. html#WS2AF26FB5-4C63-4c46-9DB3-7249558F6528
The mention of Get Media instead of Add Media makes me wonder if the video's instructor was demo'ing from Premiere Elements 10, but...
Major factors have always included having Premiere Elements project preset set correctly to correspond to your camera settings...For HDV data capture firewire...
NTSC HDV HDV 1080p30 or PAL HDV HDV 1080p25 depending on if you are targeting a NTSC or PAL area where frame rates are typically a consideration.
I had not done any DV or HDV data capture firewire into Premiere Elements. But, Premiere Elements 11's take over of the project preset setting would encourage me to encourage you to verify your project settings before the capture.
There are probably many more, but the following is online discussion of one Canon HV20 issue
http://forum.videohelp.com/threads/316970-video-capture-problems-HV20-camcorder-is-control led-but-no-video-capture
If you experience difficulty with the HDV capture fireware into Premiere Elements 11, you might consider what some others have done in this regard, that is, use HDVSplit for the capture firewire and then import the split (.m2t) clips "Add Media" into Premiere Elements 11 with the appropriate HDV HDV 1080p (1440 x 1080 HD anamorphic 16:9) project preset.
Please update us on your progress when you get a chance.
Thanks.
ATR

Premiere Pro will not import a video I captured in Premiere.

I am working with Premiere Pro Cs6, on an HP laptop, with Windows 8. This is the first time I was capturing video from a Canon XL H1. When I finished capturing, Premiere did not give me any further prompts, and when I preceded to try to import the video I captured, it is telling me that "there was an error decompressing audio or video." I need to finish this job by the end of the week, so any help would be appreciated. Thank you!

Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Using Premiere Pro CS6, currently not able to capture video.

Using Premiere Pro CS6 along with Canopus ADVC100 as my capture device through a firewire port, but in the capture window, it only shows black. I've tried all different settings. I've always been able to capture in the past. I had the AOL Tech Gurus check my computer and all ports and everything is working properly. I've even switched out the firewire cable, as well as used a different ADVC100 and different firewire ports, though it still is not working. I did see video for a few seconds without sound, but it went away. When I do power up the ADVC, it immediately starts up Premiere Pro CS6, so my computer is recognizing the ADVC100. I'm wondering if something within my computer is conflicting with the capture.
- Arlen

Thanks cvid01 for jumping in -
Where would I see the ADVC100 as the Capture Device aside from the drop down window in Device Control where I can choose it to be the Device Control?
It's always worked with the Device Control Device showing "None". And the ADVC100 has always worked in the past with Premiere Pro CS6 for all my Captures.
Also, my Premiere Pro CS6 starts up once I power up the ADVC100. Though I have even closed the Premiere Pro CS6 after it opened up, and restarted the program.
Just wondering if the program itself has some sort of bug now in the capture window? Is there a Premiere Pro CS6 fix that will solve the issue?
Here is what my capture window shows:

Premiere Pro CS4 (Windows 7) will not (Capture or Record) connect with DV Cass Recorder

For 12 yrs I've Never had a problem w Adobe Prem Pro seeing my Panasonic AG-DV2000, DV cassette Recorder. Premiere Pro CS4 (with Windows 7 Ultimate) will not connect (Capture or Record)with my DV Cassette Recorder - Panasonic AG-DV2000. I upgraded my computer to below components & added Windows 7 at same time. Have had Adobe Prem Pro CS4 since fall with no problems. I usually have 2 - 5 videos, with 2 - 4 audios, going at same time on my timeline. (These digital videos & audios I shot myself professionally with mini DV cassettes.) Most projects are between 10 to 50 mins on timeline, w transitions or crossfades between video & audios. Firewire attached from computer to Panasonic. No Capture card in new system, not needed, use to watch over an external TV, now watch over a second monitor or in program monitor.    [Am I just missing a simple setting??]           Computer below & settings:   very up to date.
motherboard                        ASUS P6T
CPU                                         i 7    2.67 GHz
RAM                                       6 GB
video                                      ATI Radion HD 5700 1 gig Memory OpenGL 3.2
Main Drive                            500g SATA 7200 rpm
Raid Drive                              1.2 TB 7200 SATA
Windows 7                            64 Bit Ultimate
DVD/CD                                  writable Disc Drive
AVG                                        Antivirus 9.0
Playback Settings
                Realtime Playback
yes                                          Desktop Video Display
External Device                    DV 25 720X 576i
Aspect Ratio Conv              Hardware
yes                                          External Device Audio
                Export                     External Device                    DV 25 720X 576i
yes                                          Disable Video output when in background.
24p Conversion Method    - Interlaced frame 2:3:3:2
Preferences          (only things not set at default)
Audio Output Mapping       --   Premiere Pro WDM Sound (have also tried Audio Out)
Device Control     DV/HDV Device Cont Options: NTSC, Panasonic, AG-DV2000P, Auto Detect
                                (Check Status) Says it is ONLINE
Media                     Cache files saved to My Raid drive not C drive (so they will run faster)
                                Indeterminate Media Timebase:   29.97 fps Non Drop Frame
Project Settings Video -- Timecode             Audio -- Audio Samples
Capture Format (tried both) DV & HDV   (all settings checked for during preview & capture)
                Under DV               says Panasonic is Online, export to tape/it renders/Premiere controls the Panasonic recorder -looks like it's recording, but see no video -                                                 hear the sound. On Playback nothing was recorded? ( And Can't capture from tape to computer)
                Under HDV            Says Panasonic is Offline, but computer able to control the Panasonic start/stop, but doesn't record or capture tape to computer?
[ I think this DV/HDV part is correct...... it's getting very confusing at this point??!! Your help is appreciated Thank YOU ]

http://www.studio1productions.com/Articles/Firewire-1.htm
Above article HELPED me -- and is working fine!!
Was an Easy fix, took less than 2 mins.
After a 2 1/2 month ordeal.
Info from the "forum help group" through adobe. jk

Premiere Pro CS6 Continues To Crash When Capturing

Lately, every time I try to capture with my Sony HDR-FX1000 camera Premiere crashes with the "Sorry, a serious error has occurred" error. I have rebooted my system several times but has not helped. Please advise.

http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html
-and Windows http://forums.adobe.com/message/4708997
I have NOT used it, but many say to try this for HDV capture
-archived at http://www.videohelp.com/tools/HDVSplit
-Click the 1st link under "Download sites:" for the latest version
I have NOT used either, but many say to try these for SD capture http://windv.mourek.cz/ or http://www.exsate.com/products/dvcapture/

Premiere Pro CS6 importing/ audio and video problems

I recently recorded gameplay from my xbox, when i open this recording using windows media player it states that the video is 3 hours 30 minutes long, which is correct, when i then import this into premiere pro, premiere pro changes it to be 5 hours and 44 minutes long, when i then play this back it plays in slow motion and audio and video start to desync, i thought it may just be the source editor playing up so i made a clip and put it into the timeline and it still had the same outcome. The speed/duration are still on 100% so im not sure what to do, anyone have any idea as to what this is, or why it is happening?

What are the attributes of your PVR video...
specifically, is it variable frame rate?
Media file evaluation utilities:
GSpot
http://www.headbands.com/gspot/
MediaInfo
http://mediainfo.sourceforge.net/en
If it is VFR, Premiere no-likey.
Variable frame rate video problems:
http://forums.adobe.com/message/4897424#4897424
http://forums.adobe.com/message/4071506#4071506

New to Premiere Pro- Errors rendering, exporting, viewing video

I'm very new to Premiere Pro (and my macbook) but have recently got into video editing for my work and am having some issues on my second project. The first project (just a 1 minute video for YouTube) worked fine with no issues. After searching the forumns I have not seen anyone with the same set of issues I am having and I'm hoping someone can point me to what the issue is. I will start with the basic information.
Premiere Pro CS6.0.2
OS X 10.7.4
2.3 GHz Intel Core i7, 8 GB 1333 MHz DDR3
NVIDIA GeForce GT 650M 512 MB
Video taken from GoPro- MPEG-4 movie H.264, AAC
Photos taken from Canon Rebel XSI- JPEG
Audio taken from Zoom H1- MP3
No 3rd party effects or programs in use
Sequence "created from clip"
Files stored locally on machine
Tried exporting using many different codecs including, H.264 HD 1080p 29.97 fps, Quicktime, etc
The issues I am having:
PP will not "render entire work area" for projects. It has worked occasionally if I start a brand new project, but never for projects I have been working on. Error shown below.
Video Preview Error
Error compiling movie.
Unknown error.
Program monitor will not show video. Upon first opening the project, the preview video will play. If I make any edits, try to render, add/delete clips, the preview just shows black- audio still plays.
Will not export any project consistently
Have only been able to get a project to export when first starting up the computer (not recently though)
Even new projects with only one video file have not been able to export (error below)
Encoding a sequence in media encoder also times out and stops half way through encoding.
When encoding I get this error message sometimes right away and sometimes after encoding for a few minutes.
Adobe Media Encoder
Error compiling movie.
Unknown error.
"Adobe has encountered an error and needs to close." This happens sometimes when first opening a project, and sometimes after a project has been worked on for awhile, and sometimes after a failed export.
I've got to assume this is some user issue I am having from being new to the software and trying to learn by doing. That being said, I appreciate any advice or solutions. I have tried to delete render files. I have tried to eliminate all of the photos, all of the video, and all of the audio files (thinking perhaps one of them was corrupt or were not compatible with the sequence settings I have). This is just a simple 1 minute video, and I have spent far to long on it trying to find a solution on my own- THANK YOU for helping me find a solution!
J

GoPro http://forums.adobe.com/message/4486784
-says Cineform WITH GoPro, to convert to other formats
-http://gopro.com/software-app/cineform-studio/
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935
Error Compiling Movie http://kb2.adobe.com/cps/906/cpsid_90670.html
-and http://premierepro.wikia.com/wiki/Error:Error_compiling_movie
-and http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
>very new to Premiere Pro
http://www.youtube.com/playlist?list=PL507B3498B4479B96&feature=plcp
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731
http://forums.adobe.com/message/3234794
A "crash course" http://forums.adobe.com/thread/761834
A Video Primer for Premiere http://forums.adobe.com/thread/498251
Premiere Tutorial http://forums.adobe.com/thread/424009
And http://forums.adobe.com/message/2738611
And http://blogs.adobe.com/kevinmonahan/2012/08/28/free-video-tutorial-samples-from-learning-p remiere-pro-cs6/
http://blogs.adobe.com/premiereprotraining/2010/06/video_tutorials_didacticiels_t.html
And http://blogs.adobe.com/premiereprotraining/2010/06/how_to_search_for_premiere_pro.html
And http://bellunevideo.com/tutlist.php
Premiere Pro Wiki http://premierepro.wikia.com/wiki/Main_Page
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861
After Effects Tutorials http://www.videocopilot.net/
Surround Sound http://forums.adobe.com/thread/517372
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935
CS6 http://www.dvxuser.com/V6/showthread.php?282290-New-Tutorial-Working-Faster-in-Premiere-Pr o-CS6
Video Scaling https://blogs.adobe.com/premiereprotraining/2010/10/scaling-in-premiere-pro-cs5.html
Encore http://tv.adobe.com/show/learn-encore-cs4/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
Regions and NTSC vs PAL http://forums.adobe.com/thread/951042
-and Regions http://forums.adobe.com/thread/895223
Missing Content http://forums.adobe.com/thread/1065117
http://helpx.adobe.com/content/help/en/premiere-pro/using/whats-new-cs6.html
PDF http://blogs.adobe.com/adobecustomersuccess/2011/05/14/help-support-pages-for-creative-sui te-applications/
CS6 Stuff Plug-ins
http://blogs.adobe.com/premiereprotraining/2012/05/plug-ins-and-third-party-hardware-for-p remiere-pro-cs6.html

CS4 Premiere Pro EXPORT settings for embedding videos in PDF

I am trying to embed a few short videos into a PDF ebook and my PDF file size is massive. I want the videos to still look good quality as I put a lot of effort into making high quality videos for my ebook.
Does anybody have any advice for export settings in Premiere Pro for the use in PDF documents? I've played around with the various preloaded export settings but I'm wondering if I can customize the settings to look good in a PDF.
(I realize Acrobat will convert the video into flash for consistent play-black)
(And not sure if this matters but my current videos are 60fps 1280 x 720 HD shot with a Canon 7D)
All advice would be greatly appreciated!!

Unfortunately, you have posted to the Pr (the precursor to PrPro) forum, so you'll likely not get as much traffic for your thread, as you would in the PrPro forum. Maybe our tireless MOD's can move it out for you, so you'll get more "eyes." Here is the Adobe Premiere Pro Forum.
Good luck,
Hunt
Oops! It looks like Adobe has changed the forum structure on me. Ignore my reference, as things changed overnight. Mea culpa, mea culpa.
Message was edited by: Bill Hunt - Added last line.

Premiere Pro CC14 won't play video in timeline...

I upgraded to Premiere Pro CC14 when it came out. I've since started a new project that is a mix of stills and video with various FX. Before, everything played fine. Now, I open the project and can scrub through the timeline, but I hit play and nothing happens. The "play" button in the program window switches from the "play" symbol to the "stop" symbol, but nothing happens. The program doesn't freeze, but it just sits there, not doing anything. Even opening the source footage to play back in the source monitor, nothing happens. Otherwise, you can open things and they show up, but nothing plays.
Even starting a new project from scratch, importing one piece of video, and trying to play it gets the same result.
Is anyone else having this problem? Is there a solution?
I'm working on a MacBookPro Retina, with 16GB of RAM on Mavericks.

>Before, everything played
Before what? What changed? Did you update anything?
I'm Windows, but some saved Mac links that may (or may not) help
next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936

Premiere Pro CC 2014 remove my video layers from sequence after export Media Encoder.

Every time I send the seq to Media Encoder, Premiere Pro hides my video layers and leaves only the audio layers. When I restart the project the workspace is messed up and I have to reset it. Do you guys know what is going on ?

Yes known issue.
Make a new project and drop this one into it.
See if that will help

Premiere pro update will not play video

PPremiere pro cloud update.
I Can not play video from premiere pro?
since updating to latest version none of my video projects will play video. I can scroll video, I can hear audio while scrolling but it will not play video.
help please.

This is normal. Switch back to Composite view.

Premiere Pro 1.5.1 HDV VIDEO CAPTURE - Canon HV20

Similar Messages

Maybe you are looking for