Premiere pro 1.5 activation error after installing CS4 Design Prem

After installing CS4 Design Prem (which does not have Premiere in it), my Premiere Pro 1.5 comes up with the Adobe activation notice, "Your computer's configuration appears to have changed since the time the product was activated..." but when I press OK to reactivate, premiere just locks up and won't respond or load. Premiere worked fine before I installed CS4. I can install Premiere again but I was wondering if anyone knew about this since I don't want to to knock out my CS4 too!
Thanks, Bruce

Hi,
I know from another site that you solved this problem with using a CS3.3 disc that you had. Exactly the same thing is happening to me. Only difference is I just wanted to free up some space and have been using the CS5 for a few weeks now so uninstalled the CS4 as it seemed odd to keep it on when it's not necessary. But now this. I have gone back to the download page and tried to reinstall but nothing. I'm guessing I will have to dig out my cS4 discs but just thought I'd see if there was a more logical alternative?
Jane

Similar Messages

Acrobat Error after installing CS5 Design Premium

OK, I'm going to try and explain exactly what I am doing and when I'm getting this error so please bear with me.
I am trying to set up a test computer for testing CS5 in our production flow. After reading some of the posts here and other places I felt it best to start with a clean system on my test machine.
I have a Intel Dual-Core 2.66GHz machine with 2GB Ram and system OS 10.5.8 (Don't have access to Snow Leopard at the time) OS was loaded clean, nothing on the machine prior to loading the system.
We are a large company and we are on a maintenance program for our Adobe Software so all I received as a installer for CS5 was a .dmg file called DesignPreium_CS5_LS1.dmg. I'm assuming that this installer is just an upgrade installer from CS4 to CS5 because it did not install Acrobat 9 Pro after running the installer. This is where my problem starts.
I had already read that there was not an upgrade for Acrobat and to just use the one that came with CS4 so that is what I am trying to do. I got out my CS4 Design Premium disks and installed just Acrobat 9 Pro.
The problem I'm having though is that when I try and launch Acrobat it gives me the error that says "Suite Product Activation Needed" (Please see image below. So that's what I tried, I launched InDesign CS5 and then Acrobat 9 Pro but I got the same error.
Is there any way to get Acrobat 9 Pro running on this machine without first installing other components of CS4 that were on the installer disk with Acrobat 9 Pro? Doing this would make it very difficult to ever install a clean copy of CS5 in my opinion. When I start with a fresh machine I want to start with a fresh machine, not install components just to uninstall them later so that certain parts will work.
If I haven't made it clear what I'm trying to do ask and I'll try and fill in the blanks.
Any thoughts? Hopefully you see this Dov and can add some insight on the options I have.

Hi,
I know from another site that you solved this problem with using a CS3.3 disc that you had. Exactly the same thing is happening to me. Only difference is I just wanted to free up some space and have been using the CS5 for a few weeks now so uninstalled the CS4 as it seemed odd to keep it on when it's not necessary. But now this. I have gone back to the download page and tried to reinstall but nothing. I'm guessing I will have to dig out my cS4 discs but just thought I'd see if there was a more logical alternative?
Jane

Premiere Pro CS5.5.2 will not install after motherboard replacement ?

Premiere Pro CS5.5.2 will not install after mothboard replacement .It was running correctly for 4 weeks prior to replacement due to AC connection issues and Wireless connectivity.
Adobe Case No. 183519673, Adobe Technicians (Asia/Pacific) have worked on this issue for over 3 hours with no results after uninstalling and reinstalling.
Any ideas to fix issue wou;ld be appreciated.

Also posted to the Hardware section http://forums.adobe.com/message/4634472
There is a New forum for Download & Install & Setup problems
http://forums.adobe.com/community/download_install_setup
Or, call Adobe
In the US - Adobe Install Problems 800-642-3623
In the US - Adobe Activation 866-772-3623 Open 24/7
I suggested providing motherboard brand/model information
[Additional information from other topic added]

My Xperia Mini Pro Touchscreen error after install Custom Rom , and now Bricked / Bootloop

Hi There. .
I've some problem here. .
My Xperia Mini Pro SK17i Touchscreen error after install Custom Rom , and now Bricked / Bootloop
I've tryin' to use Flashtool and flash Stock Firmware, but it still bricked. .
Any body may have a sollution for me?

*Moved to Android development*
Hopefully you can get some help here.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Premiere Pro has encountered an error - nothing seems to fix it!

Hey all,
I'm running Premiere Pro v. 6.0.2 on Mountain Lion 10.8.2, with a standard ATI Radeon 5770 in a 3.33 GHz 6-Core Mac Pro 5,1.
Whenever I try to open the program OR a file, I get the following message:
"Premiere Pro has encountered an error.
[/Volumes/BuildDisk/builds/slightlybuilt/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/.. /../Src/DirectoryRegistry.cpp-283]"
The strangest thing is that I just used Premiere yesterday, and after quitting it last night, tried to open the same file and got this message. I thought maybe the file was corrupted but I get the message just by launching without even opening via a project file. I then updated from 10.8.1 to 10.8.2 in the hopes that something internally might get fixed and it did not rememdy the problem. I have been scouring forums and most have pointed to resetting the permissions in the Home folder which I did both through Terminal and the "resetpassword" Repair Utility method. It still won't open! This has been very frustrating and I would greatly appreciate any advice to get this sorted out.
As a side note, whenever I open After Effects (11.0.1), it "unexpectedly quits" without an error log. I was also able to open this at least since I've had Mountain Lion, although I did not use it as recently as Premiere.
I appreciate any help and please let me know if you need any more information. Thank you!

I'm not a Mac user so I can't offer much advice other than to recommend uninstalling everything and using the adobe cleaner utility after the uninstall is completed. Then re-install everything, hopefully that should fix the problem. Sorry I don't have any info on what actually caused the issue though. But I'm going to assume that something has obviously gotten corrupted somehow. I honestly think that uinstalling is probably going to be the easiest solution here.
Here is a link to the cleaner utlity.
http://www.adobe.com/support/contact/cscleanertool.html

Premiere Pro has encountered an error - Mac 10.9.4

Hi,
I’ve just downloaded and installed (twice) premier pro (CC 2014) and am receiving this error message when I attempt to launch the program:
Premiere Pro has encountered an error.
[/ppro801/releases/2014.03/shared/adobe/MediaCore/ASL/Foundation/Src/DirectoryRegistry.cpp -283]
This happens both when I open the it from my Applications folder and when I try to open an existing project.
I’m on 3.5ghz Intel Core i7 iMac running on OS X 10.9.4
Anyone else getting this and found a way around it?
Thanks

next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936

Premiere Pro CS5.5 startup error. (DirectoryRegistry.cpp-283)

When i start up Premiere Pro CS5.5 on my iMac with OSX Lion it immediately shows this error:
Premiere Pro has encountered an error.
[/Volumes/BuildDisk/builds/Mulder64/shared/
adobe/MediaCore/ASL/Foundation/Make/Mac/../../
Src/DirectoryRegistry.cpp-283]
I don't really know what it means but i think it is because premiere can't find a file to start up because it doesn't have the right privileges. (When i login my mac as root user i can start premiere without any problems also in my administrator account with terminal starting it with sudo works without problems).
Did someone had this problem before? And how do i fix the problem?
Thanks in advance, Levi.

I have run into the same problem. I am running a late 2008 MBP with 2 480GB OWC SSD's and 8GB of OWC RAM. I have 10.7.5 installed and am running in 64 bit mode. I get this pop-up when I try to open Premiere or Bridge:
Premiere Pro has encountered an error.
[/Volumes/BuildDisk/builds/Mulder64/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/../../S rc/DirectoryRegistry.cpp-283]
I am the Admin on this computer. I don't know how to give myself more admin rights than I already have? Photoshop starts up without issue.
Any suggestions?
Thank you,
Scott

Crashing when dragging clips into source box! "Premiere Pro has encountered an error."

Hi, I just installed the CS5 Premiere Pro software trial version and it keeps on crashing when I drag my imported clips into the source box?
It says:
Premiere Pro has encountered an error.
Does anyone know why this is happening? Please help b/c I would like to use this program for a project due Monday. Thank you so much!

@ Andrey V.: I tried that but it did not work. I still get the same error message. =(
@ Jeremy D.: It's "protected MPEG-4 movie"

I have a pc with windows 7 professional. I use adobe cs6 production suite and all of a sudden premiere pro stopped working. I had installed a program recently and created a system restore point prior to it's installation. I installed Zaxwerks proanimat

I have a pc with windows 7 professional. I use adobe cs6 production suite and all of a sudden premiere pro stopped working. I had installed a program recently and created a system restore point prior to it's installation. I installed Zaxwerks proanimator 5.1. Restored computer back and I now get an error when trying to run any cs6 program it is a configuration error and it says to uninstall and reinstall.Won't uninstall says I have an error 1. What should I do?

clean and then reinstall, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Premiere Pro CS 5 crashes on new install

Had this on my other computer - worked great - on this computer keeps crashing.
Premiere Pro CS5 5.0.3
Have installed updates
What operating system? Windows 7
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. All types of footage
If you are getting error message(s), what is the full text of the error message(s)? Just crashes
What were you doing when the problem occurred? all types of things - no pattern
Has this ever worked before? Yes on my other computer
What other software are you running? None
Do you have any third-party effects or codecs installed? No
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
Are you using Mercury Playback Engine GPU Acceleration? no clue
Does the problem only happen with your final output, with previews, or both? Both

Advanced System Care - I installed and was on my last computer
Bluetooth was installed on my last computer
AVG - I installed and was on my last computer
Cyberlink - DVD burning software I installed -
Mystic Thumbs - I installed and was on my last computer
Akamai Netsession This is the adobe downloader file
Multimedia Card Reader - was installed on my last computer
Dell DataSafe Local Backup- This I can remove - was not on my last computer

Premiere Pro has encountered an error [URGENT]

I can´t open my recent project.
I receive the following error Message:
"Premiere Pro has encountered an error.
[..\..\Src\Clip\MasterClip.cpp-2802]"
Even if i want to open the auto-saved projects i get this error message.
I tried to import the project into a new project. It opened and i could edit it. But after saving and reopening i get the same error message.
WHAT CAN THIS BE? I have to finish the project tomorrow!
Could file naming be a problem?
What is Src\Clip\MasterClip.cpp? What does it cause?
Please, i need any clue!
kind regards
ps
Windows 7 - Premiere Pro 5.03
The project has different sequences and audiofiles.
I´m working on this project for a week and nothing was wrong.
Last step i have done was rendering a part of a sequence. After this render i couldnt open the project.
Strange was that in the rendered file the second audio track wasn´t rendered.

I've read a lot of people are now seeing this exact same error under varying circumstances. Let's hope they get it resolved soon!
In the mean time, here's a work around I've been using to recover from this...
• After the error and impending crash, open the autosaved copy of the file (in most cases will be more current than your last saved original) and you will notice the error message pops up again - just click continue. All of your media will look like it's missing/needs to be loaded in the preview window, but it's a simple fix and quick too!
• Select-All of your content in the Timeline panel
• Right-click with your mouse and click off the "Enable" option
• Right-click again and re-select the "Enable" option
All your media will be online and connected as well as your rendered caches.
*Note that once your project has crashed, it will give this error EVERY time you save/close/reopen the project, so you'll have to repeat the steps above each time.
Cheers,
Jeff
Jeff Foster
Author/VFX Producer
http://PixelPainter.com

Debug Event : Premiere Pro has encontered an error. [..\..\Src\PPixhandleUtilities.cpp-114]

Hello,
I have problems in Adobe Premiere CS3, as below:
1. =================================
Debug Event:
Premiere Pro has encontered an error.
[.. \ .. \ Src \ PPixhandleUtilities.cpp-114]
2. =================================
Adobe Premiere Pro is running very low on system memory. Please save
your project and proceed with caution.
================================================== ======
I've tried to reinstall Adobe Premiere of her, but the problem persists.
What should be done to solve this problem which paralyzes all my work?

How to repair projects that get a "TickTime.cpp-290" error after opening a specific project.

Premiere Pro has encounters an error upon bootup

I am getting the following error when Premiere is booting. I also notice that i don't have any effects available. I am able edit and save videos just fine.
Premiere Pro has encounters an error
..\..\Src\Core\PropertiesImpl.cpp-479
I am running the latest version of Premiere (CS6).

1st, are you (you MUST) running PPro/Encore using an Administrator level account?
- even if you are, do what it says here http://forums.adobe.com/thread/969395
2nd, the 840 link I posted asked for a LOT more information... please post hardware details
- it MAY be that your Windows is not up to date via Windows update
- it MAY be that your hardware device drivers are not up to date (details needed)
>don't have any effects available
This MAY help http://helpx.adobe.com/premiere-pro/kb/features-presets-missing-premiere-pro.html
- or Missing Activation http://forums.adobe.com/message/4626662
- or Missing Content http://forums.adobe.com/thread/1065117

Premiere Pro Debug Event - Premiere Pro has enconuntered an error.[..\..\src\TickTime.cpp-290]

Ho salvato un progetto Premiere Pro CC (2.2014) tre volte successive con i nomi: telecinema1.prproj, telecinema2.prproj e telecinema3.prproj. Tutto ha funzionato regolarmente e per fortuna ho esportato tutti i file e anche alcuni _copiati con Project Manager.
Ad un certo punto però quando ho cercato di riaprire il n.3 mi è uscito il seguente avviso: Premiere Pro Debug Event - Premiere Pro has enconuntered an error.[..\..\src\TickTime.cpp-290] con relativo crash.
Non mi sono preoccupato e ho provato ad aprire il n. 2, ma anche questo e poi anche il n. 1 mi hanno dato lo stesso problema.
Ho riscontrato che si tratta di un errore ricorrente, ma non ho trovato nessuna segnalazione con TickTime.cpp-290.
Cosa faccio? Grazie

How to repair projects that get a "TickTime.cpp-290" error after opening a specific project.

Read/Write errors after installing SSHD

After installing a Seagate Thin 500GB SSHD into my Late 2008 MacBook Pro, I would get errors after my computer had been asleep for several hours. The error codes end with -50. I thought that limiting the speed of the drive with a jumper would work, but it hasn't.

This is from the Toshiba knowledge base : http://forums.toshiba.com/t5/Computer-Troubleshooting/Errors-after-installing-new-advanced-format-ha...
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Premiere pro 1.5 activation error after installing CS4 Design Prem

Similar Messages

Maybe you are looking for