Premiere Pro 1.5: Best analog to digital converter for BNC?

Recently I've been looking for an external analog to digital converter (that connects via firewire)that will work with Premiere Pro 1.5 for capturing uncompressed digital video from any source, whether it be BNC composite from a U-Matic to S-VHS via S-Video (either DIN or Y/C BNC) to Betacam SP BNC Component. It would also be nice if it could import digital sources (i.e. DVCPRO 50/Digital Betacam) as well by SDI.
I've looked at a few by AJA or Blackmagic, but I'm not sure if they would work with Premiere Pro 1.5 on Windows XP SP3.
Does anyone know of a good converter?

I have NO IDEA if it will work with everything you list, but do some reading at http://www.grassvalley.com/products/converters

Similar Messages

Which is the best Analog to Digital Converter

Hey everyone,
Im new to this movie making digital world. I have been using imovie for a while and looking to upgrade to FCP. Before I spend the money, just a few questions hoping someone would know the answers.
1: Can I use idvd to burn my movies with FCP?
2: Im need an analog to digital converter, but not sure which one to get. I have VHS, Hi8, mini DV, etc... Which converter is best with mac, specifically with FCP?
3: Does FCP work well with an external harddrive?
Thanks...

1. Yes
2. Canopus and DataVideo are popular but some camcorders have a built in A-D converter. Note that Mini-DV works without needing a converter. Just plug in your camera with FireWire.
3. Yes

Do I even need an analog to digital converter for old VHS?

I'm just trying the most cost effective way to transfer all of my old VHS & HI-8 material to a digital format for better preservation. Since, why I do not know, PE doesnt allow for analog capture, I need a converter like Dazzle to get my analog source to digital. Or do I?? Can I not just use Windows Movie Maker to capture then import into PE? Doesnt my capture card do convert?? I have my VCR hooked up via S-video to the card. Is the card not the same thing as an external converter? I just want to know the best way so I dont waste my time only to have to go back and redo everything. Thanx yall

Thanx y'all. Thats where I'm a bit confused. You mentioned "quality DV-AVI". I'm under the assumption that when I capture an analog signal that I set at 720x480 is a "quality DV-AVI". After I have captured and rendered to an .avi file I then import that into PE. Is that what you are meaning? Or is that an inferior quality video file? The capture card I have is a Legacy capture card that came with Pinnacle Studio ver 9. Pinnacle is a great intro level editor, but it sucks because it's slow, unstable and captures out of sync audio which I have to go in and manually sync. I shouldnt have to do that. I'll spend $100-$200 if thats what I have to do to get the results I want. I'm not looking for HD quality here. I simply want to capture all my old analog media, edit it, and burn to DVD and keep on my HD to preserve it all. I want it to be the same quality as it appears on its original medium.I also want to continue to edit and burn stuff using my Mini DV camera as well. I just want an editor thats above intro level, but not as complex as Premieire Pro. I feel that PE will do the job well. My capture card has S-video, firewire & composite inputs. Is my card not what I'm needing?? Or, do I need an analog to digital converter to get the analog material into a raw digital format thats the same quality as the original?
To help in my endeavors i recently upgraded and built anew PC so that I would have no problems, seeing that video editing does tax a computers resources. My new build is a Quad core 4 gb of RAM system. So my computer power should not be an issue for home editing and what not.

What is best analog to digital devise for Final Cut?

I'm using MYTV to transfer anolgue video tape to FC Express, and I can't get any audio. Is there a better devise that is compatible with Apple?

Does your digital video camera "pass through" to your computer? Alternatively you can connect your analogue camera/tape player to your digital camera, record on digital tape and then capture to FCE. It's slower, but works just fine if you only have a few tapes to transfer.
Ross Hunter
Orange, VA

Analog to Digital Converter-- What's A Good Product For My System?

What would be a good analog to digital converter for Final Cut Express HD 3.5 on a Mac OSX 10.4 system? I've used a Canopus on a MacPro with Final Cut Pro before and liked it, but wasn't sure what would be a good product for my macbook. I've looked at the Canopus advc-110 and 55 but am not clear on the difference and if it would work with what I have.

The ADVC-55 is capture only. It includes composite & s-video inputs and stereo audio inputs. Firewire output.
The ADVC-110 is bidirectional (meaning you can both capture and output through it - this is a very good way to monitor your video during production as you can see the actual quality on a monitor/TV rather than just your computer screen, which has limited capability to show you the actual video quality.) It includes composite & s-video inputs and outputs; stereo audio inputs & outputs; Firewire input & output.
The ADVC-300 is also bidirectional and includes composite, s-video and component video i/o (D1 connector) inputs & outputs; stereo audio inputs & outputs; Firewire input & output; and software that enables you to tweak its video settings. Helpful in cleaning up particularly bad analog videos.
I've used these things for years and they all work great. I do not believe there is any difference in the internal conversion hardware ... The primary differences are support for one-way vs. bidirectional conversion; input/output connectors; and the software that comes with the ADVC-300.
If you have basically clean analog video, any of these units will be fine. You can use any analog source (VHS deck, camcorder, DVD player, etc.) and would typically use iMovie or Final Cut Express to capture your video on a Mac.

Best Analog-to-Digital Video Converter?

What's the best and most inexpensive analog to DV converter for importing video from a VCR onto my eMac?
I'm using iMovie 4 if that makes any difference...
Message was edited by: daftboychemist

Faedo,
Cheapest ways:
1. Do you have a DV camera? If you do and it has "digital in" then you can take the output from your VHS player, route it through the camera and into your PC. The manual would explain if it is a feature.
2. Secondly, search ebay for Dazzle Hollywood DV Bridge. This is a hardware converter that takes the analogue and does the conversion for you.
Good luck.

RE: CS4 Premiere Pro - what is best to backup/archive video to minimize size

RE: CS4 Premiere Pro -> what is best to backup/archive video to minimize size?
I use export>media to adobe media encoder. I am using the avi. the avi file generated seems large. i.e. for 27 minutes the file is 6 gb.
what is the best format to use to minimize file size?????
any help will be appreciated and thks in advance.

>what is best to backup/archive video to minimize size?
That's the wrong question to ask. Ideally you don't change anything about the original media for backup. It's size it it's size, and you get enough of whatever you nee to accommodate that.

How to store the output of a analog to digital converter into an 2D array

Hi
I am doing my M.Tech Thesis in Image reconstruction and I am using labview for simulation and I want to know how to store the output of a analog to digital converter into an 2D labview array.

nitinkajay wrote:
I want to know how to store the output of a analog to digital converter into an 2D labview array.
How exactly are you performing 'Analog to Digital'???
Grabbing image using camera OR performing data acquisition using DAQ card OR some other way????
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

Analog to Digital Converter boxes

Does anyone think Apple will ever fix iMovie to restore usage of many analog to digital converter boxes that were broken by iMovie 5?
I have a SONY DVMC-DA1 firewire unit and wish I could use it again in iMovie. Does anyone know what the exact component is that they left out or changed that would cause this problem? I'm just trying to understand.

The ADVC-55 is capture only. It includes composite & s-video inputs and stereo audio inputs. Firewire output.
The ADVC-110 is bidirectional (meaning you can both capture and output through it - this is a very good way to monitor your video during production as you can see the actual quality on a monitor/TV rather than just your computer screen, which has limited capability to show you the actual video quality.) It includes composite & s-video inputs and outputs; stereo audio inputs & outputs; Firewire input & output.
The ADVC-300 is also bidirectional and includes composite, s-video and component video i/o (D1 connector) inputs & outputs; stereo audio inputs & outputs; Firewire input & output; and software that enables you to tweak its video settings. Helpful in cleaning up particularly bad analog videos.
I've used these things for years and they all work great. I do not believe there is any difference in the internal conversion hardware ... The primary differences are support for one-way vs. bidirectional conversion; input/output connectors; and the software that comes with the ADVC-300.
If you have basically clean analog video, any of these units will be fine. You can use any analog source (VHS deck, camcorder, DVD player, etc.) and would typically use iMovie or Final Cut Express to capture your video on a Mac.

Analog to digital converter advice

Anyone have any thoughts or tips on using this analog to digital converter with a VCR and CS6? Has anyone used one of these before?
http://www.grassvalley.com/products/advc55
Thanks.

http://www.biopac.com/Manuals/dv%20converter%20advc-55%20user%20manual.pdf
Page 13 has the guide for the dip switches.
You can also test if you get a better result by applying set up or otherwise in switch 2.
BTW - how old are the VHS tapes and what do they look like before digitising them?
Are they PALor NTSC originally?
(The box wont do a great job of converting them either so stick to what they are ).

Hi i was told to come to the support with the error number 16.... for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

hi i was told to come to the support with the error number 16. for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

Hi Omid,
Please refer to the help document below to fix the error 16:
Configuration error 16 | CC, CS
If the issue persists, please contact the support:
Contact Customer Care
Regards,
Sheena

Recommendations on Analog to Digital Converter

First I want to say that many people recommend the "pass-through" feature of many MiniDV cameras. Mine does not have that feature. :-( I am using ADS Tech CapWiz Xpress DX2. It is a fine hardware/software program with the record to hard drive feature. But, it records in MPEG-2, which caused me to have those "red frames" show up in my video. I am using Premiere Pro to edit my video. I do have the option of saving the file as MPEG-1 and MPEG-4 (Divx). But, I'm not sure if I will have the same problem saving in one of those other file types. If that is not a good solution. What other Analog to Digital converters do you recommend for me. I don't want to buy another digital camera. But, a device that I can place between my VCR and laptop that does the job would be great. I prefer a device that can import and save files as the same type that Premiere saves to after "capturing" footage from a digital device. Anything from "Pinnacle" won't work. It won't install on my laptop for some reason.
I am using Windows XP sp2, Duo Core processor, 2GB RAM, Production Premium CS3.

Go to canopus.com as they have what you need ADVC 100, ADVC 50. Try ebay too. Nice converter long lasting, very easy to use. Stays outside the computer so no software to install, and works with every program and platform

Good Premiere pro Cs5.5 Video Editing Computer Set Up For Under $3000

Hey everyone im hopeing to hear for Harm Millaard input on this and anyone elses who understands PC computers for video editing. I need to build a computer set up for my specific needs. I am a youtuber who makes videos for a living and I need a speedy computer for editing primarily in premiere pro CS5.5 and sometimes in After effects. I use magic bullet 2.0 color grading in almost all my videos so that slows my computer down alot. The current computer I have now shuts off when ever it runs to much stuff and gives me the BSOD so its extreemly fusterating because editing something small can take me all day because of the constent shutting off. Mostly does BSOD when I uses Magic Bullet 2.0 I shoot with DSLR footage but once in a while it will happen out of the blue when running alot of things but mostly when exporting. I need a list of specs that will all work together to give a perfect workflow for my needs and I also would like advice on what Raid because I dont fully understand it as well as what back up drives etc should I have. I plan of buying the specs and having someone build it for me and set up raid etc that knows how to do all that. In case some of you wonder what type of computer I have now these are the specs if you need more information on what I have in my computer ask exactly what info you want to me to tell you and ill look it up.
If you have advice on specs I dont have to re-buy that I could take out of this computer to save money then that would be better as well. I currently have no back up external drives as well so Idk what I should buy for that as well. Thank you all for your time a head of time!

Well!!!!.....where do I start?? You must spend some time here reading all the valuable info that has been presented and discussed many times here. Basically, PPro is a very demanding , PROFESSIONAL program that needs beefy and SPECIFIC hardware to run properly.
AMD CPU will not cut it.....it lacks the necessary instruction set that Intel has that apply to video processing.
You need a fast Intel i7 CPU for starters.
You do not mention video card.....NVidia CUDA card of over 1GB video memory is required to enable the "Mercury PlaybackEngine", which provides a TEN TIMES INCREASE in rendering speed of previews.....not to mention accelerating the export process by handling some specific effects during export.
Some DSLR codecs,( like Canon MOVs) cause PPro....which is a 64bit program..... to open the 32 bit " Quick time Importer" process, ( as Quick Time is 32 bit), slowing down the process, even with good hardware. Editing highly compressed consumer codecs,( AVCHD,etc.) in real time ,then exporting can be very taxing on a computer, requiring top -notch components. Even if you do it the old way and transcode to a more edit friendly codec before editing.....you would then need a larger,faster disk system to handle the huge files at a high speed!!!
16GB system memory is OK for 5.5.....with 6 and later, 32GB is better.
Two separate hard drives are the required minimum for PPro......currently, the best performing and cheapest setup would be : C drive= 120GB quality SSD, D drive = 2x 7200 RPM HDDs in onboard RAID 0 for pagefile,previews, and all cache files. E drive= same setup as "D", for media,project files, and export. F drive = large 7200 rpm disk for necessary backup of important files and backup of "D" drive. All drives should "indexing" and" compression" turned OFF,( under drive Properties window).
Less expensive would be just three separate 7200 RPM HDDs...that could be OK with just DSLR footage which is so compressed that it requires less actual MB/sec., unless you are using many tracks of video, upping the requirement needed.
Read the many posts and articles by Harm Millard and Bill Gehrke....they have contributed a tremendous wealth of knowledge and experience to the readers.....preventing many from making bad purchases and expensive mistakes when trying to construct a machine that will perform well....their website, PPBM5 is invaluable as it can show you all the video benchmark results of differently configured machines. It is a good guide as to what you may want to build,or, purchase.....Good Luck!!

Premiere Pro CS3 Capture Question (Firewire to USB Converter)

Does Premiere Pro CS3 support capture through a Firewire to USB Converter? More specifically, we have one particular PC laptop that does not have a firewire port, only USB 2.0. So we were thinking of getting a firewire to USB converter. Will that work for capturing footage from our Mini DV camera?
Camera is Canon XH-A1S HD and a firewire cable will be running from this camera to the firewire to USB converter, then a USB cable will be running out of the converter into the dual core laptop with Windows 7, 4GB RAM, Nvidia 460M video card.
Thank you!

Might work then again it might not. Have not heared of any positive results. In other words imo its a waste of money.
You need a real firewire connection.

Premiere Pro and Soundbooth won't play video/audio for more than a second.

Ok, so my issue is that Soundbooth won't play audio for more than a second. It plays a quick bit then stops. Premiere Pro also does the same with video, it plays a quick bit then stops. I don't know if it is connected or not but when I try to change the audio output in Soundbooth to System Default I get this error:
I set the permissions to premiere and soundbooth to full but it didn't work. I've tried UnInstalling and ReInstalling but that didn't fix the issues either. All of the other programs seem to work. Any help would be much appreciated!!

Here is the fix.
1. Open Finder and navigate to /YOUR_HD/Library/Preferences
2. Rename or move to the Trash the file: com.apple.audio.AggregateDevices.plist
3. Relaunch The Program

Premiere Pro 1.5: Best analog to digital converter for BNC?

Similar Messages

Maybe you are looking for