Premiere Pro 1.5 in windows 7

I have an old project that I'd like to re-edit on my new laptop with windows 7. Will it support AP Pro 1.5 without any problems?
Thanks
Mick

If you have Win7 PRO or Ultimate, go to http://www.microsoft.com/windows/virtual-pc/download.aspx
I don't remember which old version it was, but at least one user solved his problem with the above link
A fix via Virtual XP http://forums.adobe.com/thread/702693?tstart=0

Similar Messages

  • Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

    My XP machine crashed, I reinstalled Premiere Pro 2.0 with Windows 7, and I got the following error: 'The Currently installed soundcard driver does not support Direct Sound Input. Recording audio is not possible.' The soundcard drivers are updated. Any ideas? Here's what I have: AMD Phenom II X4 965 Processor  3.40 GHz 8 GB, 64 bit. Thank you for looking.

    Thanks! Though I upgraded to solve the problem, this is good to know.
    Bob
    Date: Wed, 9 Nov 2011 04:45:42 -0700
    From: [email protected]
    To: [email protected]
    Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
    Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
    VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
    Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
    AND NOW YOU CAN USE PREMIERE PRO 2.0
    Enjoy
    Steve - Italy
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Is adobe premiere pro cs4 compatible with windows 7 or 8

    is adobe premiere pro cs4 compatible with windows 7 or 8?

    CS4 forum http://forums.adobe.com/community/premiere/premierepro_previous?view=discussions

  • Premiere Pro 6.5 and Windows 7

    I am using Premiere Pro 6.5 in Windows 7 but I have found it impossible to display on two monitors,  I like to extend the Timeline and have "Monitor" on the second display.   Anyone know why I cannot get dual monitors"
    Thanks.
    George Perry

    >was told it would run on Win7 Home Premium.  
    I suggest you find the person who told you that, and ask how
    >It ran O.K. in dual monitor mode in Windows XPPro
    The link I provided has a link to a Microsoft product to create a "virtual XP" session that worked in that case
    But that Microsoft product requires at least Win7 Pro to run, so you can't use it with your current setup
    I still use Premiere 6.5 to be able to operate an old Pinnacle Dv500 card to (slowly) digitize my old collection of VHS tapes before they won't play
    I do this by dual-boot (aka multi-boot) with WinXP on one section of my boot drive and Win7 Pro 64bit on another section to run CS5
    If you have a WinXP install CD, go to http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US and do a search on dual boot or multi-boot to find out how

  • Why does Premiere Pro blue-screen if Windows Audio Service is enabled?

    Since I enabled ASIO in Premiere Pro, I have to remember to disable the Windows Audio Service before starting Premiere Pro, or else it will blue-screen at some point, usually after I pause playback of a video clip.  It only happens in ASIO audio mode, and completely goes away if I disable Windows Audio.  Something is interacting badly between the Premiere Pro ASIO driver and the Windows Audio service.  The error message has something to do with USB host or something like that...I don't have it in front of me right now.
    I tried to create a batch file to disable the service, then run Premiere Pro with "start /wait", then re-enable it when premiere is closed, but Premiere Pro cannot be run by that command, unlike every other executable I've ever used it on.  It just doesn't come up.  So I tried with a Powershell script instead, and when doing the equivalent in Powershell, Premiere Pro starts, but the window is blank and hangs forever until you kill it by clicking the X.  I would be fine with a scripting workaround, but Premiere Pro is really really really resistant to that apparently, so my only option is to remember to disable it manually EVERY SINGLE TIME.  It's just annoying when I forget to disable it and then I lose work, and probably hard drive clusters, when the blue-screen comes.  And if I want to export something to another program in the suite that doesn't use ASIO, I won't be able to play audio without closing Premiere and fiddling with the service.
    Here are the specs that might be relevant:
    -Windows 7 x64
    -M-Audio FastTrack Pro sound card (usb) [latest drivers]
    -12 GB RAM
    -Intel core i7
    -gtx 460 video card with the ini file CUDA hack

    I'll make sure to do that.  But in case the bug takes a long time to fix or gets pointed to M-Audio, who will most likely not ever fix it if it's in their stuff, does anybody know how I can get the batch file and/or powershell solution to work?  I don't really get why Premiere Pro would know or care who launched it as long as it launched in its own process.

  • Premiere Pro CS4 "Export Settings" window does not show up.

    Hello,
    I've run into a new problem with Premiere Pro CS4. Basically, when I select "File > Export > Media" my Export Settings window doesn't show up. If I click on the Premiere window I hear the beeping sound and nothing happens, if I hit Enter the Export Data window pops up and then Media Encoder opens. So, it seems that my Export Settings window is still open but I can't see it and make the necessary setting changes. It does not appear to be minimized and I can not locate it on my desktop anywhere. This is really frustrating because I was able to see the Export Settings window just a few weeks ago when I was exporting my last project. I've tried changing my screen resolutions but that didnt reveal the Export Settings window.
    Does anyone know what is going on here and, more importantly, how I can fix it? I am really stuck here and am working against a deadline. Any and all help is greatly appreciated!
    -Ben

    Ben,
    THANK YOU!!!! For two days I have been struggling with the exact same issue. And of course it was simple to fix, if I had just thought about it. Thank you for taking the time to post your experience. I had tried all sorts of stuff trying to get everything onto my #1 monitor, with desktop & workspace resets, resizing my display, etc. After reading and printing your post,
    Hitting ALT+Space,
    Down Arrow,
    Enter,
    and then pressing the left arrow and watching my Export window slide into view, I was laughing so hard, that I was tearing up. It would have been a month waiting for my second monitor to get repaired to get to see what was still being displayed on this ghost monitor. Each week, I video and edit our church's service and then post three versions (Windows Media Player, Ipod-MP4, MP3 Audio) of it to our web site. I would have been four weeks behind were it not for your post.
    Again, a BIG Thank You!!!
    Tony Salso
    [email protected]
    Cedar City, UT 84720
    Tony—Professional Digital Pictures
    --Videographer and Webmaster
    Red Hills Southern Baptist Church
    Serving Jesus in Southern Utah
    [email protected]
    www.redhillssbc.org

  • Premiere Pro 2.0 and Windows 7

    Is Adobe Premiere Pro 2.0 (and other software included in ProductionStudio PRM 1.0) supported by Windows 7?

    Harm,
    Is it really that easy?  So, there is no need to download Windows XP Mode and Windows Virtual PC (http://www.microsoft.com/windows/virtual-pc/default.aspx)?
    Of course I would prefer to upgrade to at least Adobe CS4 Production Premium, but the best price I could find was $400 on studica.com.  Or I could upgrade my Adobe Production Studio Premium to CS5 Production Premium for $800.  But, these are not options for me right at this moment.
    Thanks so much,
    Angela

  • Cant run Adobe Premiere Pro 2.0 on windows 8.1. Need help.

    I recently discovered that CS2 items were free, so I wanted to get a piece of that pie. Considering that I don't have a movie editing application on this new computer, I wanted to switch to something complex. When I download the installer from the page and installed it, nothing out of the ordinary happened until I tried to start it. It popped up with the splash screen, and then immediately crashed in a literal split second. I opened my task to see if it was running in the back, and it was not. Now i'm starting to notice that Adobe Premiere Pro 2.0 isn't compatible with win8.1, even if I set compatibility to Windows XP service pack 3. This is so frustrating. Is there a patch or something i can use to fix this issue?

    Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors

  • .avi video clip audio not working in premiere pro but play is windows media player

    Hi all,
    Using .avi video files. They play fine in windows media player. In premiere pro, the video plays fine, but there is no audio. When moved to a sequence, it builds an audio track, but it is silent. Any help is appreciated.

    AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • Adobe Premiere Pro CS 6.0 Windows and Mac platforms

    I'm currently working freelance at a company that has Premiere Pro CS 6.0 working on the Mac platform. I have Premiere Pro CS 5.5 at my home office working on Windows. If I upgrade my system to CS 6.0, will there be any workflow issues going from projects created in the Mac platform and then taking it and working on the Windows system, and then back again?
    Also, since I'd store all footage and sequences on an external hard drive that I can plug into the Mac systems, and then bring it into my Windows system, what do I need to ensure that the workflow is seamless? Or am I "peeing in the wind"?
    Please let's keep the discussion to upgrading to CS 6.0 and not engage in any discussion about going Creative Cloud.
    Thanks, in advance, for your input, everyone.

    You can google mac drive and do some study of fat32 and mac formats, and basically deal with that compatibilty thing as it relates to your OS systems...and also the drive letters and each computer being able to either cascade automatically or you assign manually ...so your paths are correct to source files, exports etc. ??? It isn't easy to swap stuff aound even with same OS, let alone different OS versions of mac and PC.. but if you check out mac drive and then talk to real people who are USING the same workflow you hope to use then you should be able to work it out. I would really yap with humans who use the workflow .. like call up some post house near you and ask them what they are doing exactly... what OS they are using for mac and pc, and so on.
    otherwise, yes, you are pissing in the wind and hoping for the best.

  • Premiere Pro CS5 Crashing in Windows 7

    Hello,
    Recently I have been experiencing program crashes in Premiere Pro CS5. Everything works fine, until I try to import some media. It often imports fine, however when it comes to conforming, he whole program freezes and Windows Error Report comes up. This happens everytime. I thought that it could possibly be a problem with my computers hardware (as I had been running Premiere Pro on the bare minimum requirements). So I upgraded my Processor from a Dual Core 2.0Ghz to a Quad Core 2.5Ghz. I also doubled the RAM from 2GB to 4GB. Yet the same error still occurs. Has anybody else been experiencing the same problem, and are there any steps I can take to fix it?

    Welcome to the forum.
    What are the full specs. of your Source Files, and what is the Sequence Preset?
    Also, please tell us about your system's I/O, i.e. the HDD's, and especially things like defragmented free space. The more details, the better.
    Last, are you running Win7-64 with but 4GB of RAM? That is just about enough to run Win7-64, and leave little, if any, for PrPro.
    Good luck,
    Hunt

  • Premiere Pro CS4 compatibility with windows 8.1

    Does anyone know if it is possible to run Premiere pro CS4 on windows 8.1 or windows 7?
    Thanks!

    Hello Vera,
    the answer is YES: Please have a look there:
    http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Nam e=Adobe+Premiere+Pro+CS4&vendor=Adobe&ModelOrVersion=4&Type=
    Hans-Günter

  • Premiere Pro crashing on export (windows)

    Hi all
    I have looked into the solution to this problem on the forums and it seems to be a mac only problem. However I am using windows 7 64bit.
    I go to export>media it thinks about it for a few seconds and then premiere freezes, 'stops working' and crashes to desktop.
    The project is less than 2 minutes long with some minor color correction, contrast and a bit of text. It has repeatedly done it with this project while others export fine.
    Tech specs are:
    Premiere Pro CC
    Windows 7 64 bit
    Intel(R) Xeon(R) CPU E5-2620 0 @ 2.GHz
    32 GB RAM
    AMD Firepro v5900
    Any help or ideas would be greatly appreciated

    Hi john
    I have found what was causing the problem, an errent large .psd file had found its way into the project and was causing the crash.
    Its now been resized and all is well.
    Thank you for your time

  • Did adobe premiere pro cs4 run on windows seven?

    I am going to buy a new computer, but i was using cs4 suite, but i dont know if Premiere pro cs4 run on it. friends tell me there are some compatibility problems...
    Someone can give me some informations?

    If you go with Windows 7 (hopefully 64 bit) you will have to tune the OS.  Microsoft alone will install about 70 processes many of which are totally unnecessary and reduce the performance of your system. Also a purchased computer will have the usual extra garbage that systems houses usually install.
    Also a few instances have occured where people have had to roll back graphics drivers.  I have two systems running beautifully on Windows 7.  I have reduced my process count down to about almost 30.
    I strongly recommend windows 7 64 for CS4

  • Probleme mit dem Premiere Pro CC Download wg, Windows 7 32 bit?

    Hallo zusammen,
    ich versuche gerade, Premiere Pro CC auf meinem Laptop zu installieren und bekomme als Angebot alle möglichen Apps, nur nicht diese. Kann der Grund meine Windows 7 32 bit Version sein?
    Danke im Voraus
    Susanne Herdyanto

    Can I downgrade the CS InDesign portion of the 5.5 Design Premiere I purchased on disk to a version that will support a Windows 7 32 bit (64 bit capable) computer?

  • Is Premiere Pro CS6 compatible with Windows 8? Adobe let me download a 7Z type file but I cant do anything with it.

    I am trying install Premier Pro CS6 on Windows 8 so I can extract Adobe Encore. This is a little ridiculous. What do I do with this 7Z type file? I have tried downloading a 2nd party installer app but no luck.

    adobe 7z files are paired (file 1 of 2 and file 2 of 2) with matching exe files.  both should be placed in the same directory and the exe clicked (or double clicked).

Maybe you are looking for