Premiere Pro 1.5 will not load
Hi,
After quite a period 'away' from editing thought it about time to get back into it. However, my Premiere Pro 1.5 will not start on my computer. It (normally) gets to the loading Wave_Warp AEX, stops, thinks about it for a while and then the computer re-boots itself! It works fine on my laptop and I even tried it on my wifes desktop with no problems. I have tried everything that I can think of to stop this happening, including a full system restore with hard drive format thinking a clean HDD would be okay, but no, the same result. I suspect there is a compatability issue with this computer, which is a Hewlett Packard Media machine running Win XP Media version. Any help/advice much appreciated - I've already spent a lot of time trying to get this to work and thats before I've started editing!
PS I'm very much a 'home user' and so do not want to go to the expense again of upgrading, only to find that would have the same problem - I did have an old 'trial' version of Pro 2.0, but that had the same result, the computer re-boots during loading.
Many thanks
mkn
Thanks again for the replies. Harm, I would like to do what you suggest but not entirely sure on how to do it. The only discs I have are the ones I made when I first got the computer (its a Hewlett-Packard) and they are the standard 'restore' discs. If I 'format' the c drive, ie erase everything and then do a restore with the rescue discs would that give the correct response or do I need to get a proper, full install (of say Windows 7)?
Jim, ironically I was getting a hunch that it may be a memory module. It has 2 GB consisting of 4 times 512 banks. When I first got the computer one of the banks failed and was replaced under warranty but in that instance the entire computer would not start. Having said that, i'm sure this a communication problem between the software and the computer. It fails after the last 'loading' instruction (something like Wave_AEX), or, occasionally it gets past that onto the normal workspace but will then fail anytime within the next 15 secs or so.
Next job will be to systematically remove a memry bank at a time to see if I can isolate it that way. If that doeas not work then i'll do as Harm suggests.
Thanks again.
Similar Messages
-
Premiere pro 1.5 will not load stops at GPUPageCurl.AEX
Preemiere pro 1.5 will not load, it stops at GPUPageCurl.AEX, will this program work on vista?
Any one have any ideas for a cure?SORRY, TRIED TO INSTAL MY XP-PRO OS ON THIS COMPUTER AND IT WAS A NO GO. I WENT OUT AND BOUGHT ONE OF THOSE NEW FANGLED 'POS' VISTA ONLY FUJITSU LAPTOPS, IT WILL ONLY RUN VISTA+ OS, SO FUJITSU TELLS ME, SO XP'S NOT AN OPTION. THE FIX NEEDS TO BE AN ADOBE/GATES UPDATE/PATCH.
AND BY THE WAY, I LIKE WRITING IN 14PT ARIAL BLACK BOLD DATK BLUE ITALICS, IT'S EASIER TO READ AND MY FRIENDS KNOW MY PEN, WHEN SCROLLING THROUGH THEIR MESSAGES.
NOW THIS IS AN EXAMPLE OF SHOUTING! -
My licensed copy of Adobe Acrobat Pro 9.0 will not load
My licensed copy of Adobe Acrobat Pro 9.0 will not load - the disk just isn't recognized by our drives any longer. How do I get a replacement disk? BTW - Adobe support seems to be the worst I've ever experienced from any single company. I am getting no where! It took me forever to find this forum and I am not expecting any results. Is there a competitor for Adobe Acrobat 9.0? I need to convert documents to PDF, combine pages, etc.... We are paperless and need these functions.
Try post 8 in http://forums.adobe.com/thread/1061905.
-
Adobe Premiere Pro CS6 (mac) will not completely launch.
After a few weeks idol my Adobe Premiere Pro CS6 (mac) will not completely launch. It tells me a serious error has occurred, it shuts down and the circle continues. I've even reloaded the app and it happens again. I did upgraded to Yosemite but I can't find anyone else having probs with Yosemite. Any ideas. No luck on the adobe site.
>did upgraded to Yosemite
CS6 is about 3 years old... even the latest Cloud versions had to have updates to be compatible... since you have "reloaded" (was that a full uninstall and reinstall?) I have no other suggestions -
My Premiere Pro crashed and will not reload. Can I uninstall and re download with Creative Cloud?
Yes, if you're a Cloud subscriber and are running a 64 bit operating system.
-
Premiere Pro CC 2014 will not play
I usually like to wait a few months before updating, but I had an issue with a client and needed to get the new version of Premiere Pro CC.
Premiere Pro CC 2014 will not play in Source or Program. Clicking play button or spacebar causes play icon to change from start to stop, but nothing happens. I'm on a late 2012 iMac. i7 Processor. OSX 10.8.5I'm Windows, but some saved Mac links to read that MAY help
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
External speakers stop playback http://forums.adobe.com/thread/1370072?tstart=0 -
Premiere Pro 2.0 will not import --
Premiere Pro 2.0 will not import mov, wmv, avi, mp4 or avchd files. What format does it want? OR does this have something to do with my Win 7 machine not having the right codecs? If so, which ones are the right ones and how do I install them?
>not compatible with W7
Right click the program icon and select XP compatibility from the pop-up option list
Also right click the program icon and select "Run as Administrator" to see if that helps
If you have W7 Pro... read ONE example of using Virtual XP http://forums.adobe.com/thread/702693
-And http://windowssecrets.com/newsletter/using-windows-7s-xp-mode-step-by-step/ -
Macbook Pro Flash videos will not load on any browser?
On my macbook pro all of a sudden all flash based videos such as youtube will not load and freeze before they are loaded. IT does not work on safari, chrome, or firefox. have uninstalled and reinstalled flash. Used Disk utility. Empted cache. Any idea what is wrong? This problem just started this week. Internet connection is good.
Uninstall Flash
Download OnyX and run all the checks, maintaince and cleaning aspects and reboot at the end.
http://www.titanium.free.fr/
Reinstall Flash
http://get.adobe.com/flashplayer/
If that doesn't work, create a new user, log into it and see if your issues continue. -
Premiere elements 10 Organize will not load
premiere elements 10. Organize will not load error message.Microsoftt visual C+ + Runtime Library. Runtime error. Program: C/: Program files (86)
Here are some C++ Runtime Error threads:
http://helpx.adobe.com/creative-suite/kb/microsoft-visual-c-runtime-error.html
http://forums.adobe.com/message/4777483
http://forums.adobe.com/thread/402686
http://premierepro.wikia.com/wiki/Error:C%2B%2B_Runtime_Library
Some are for other Adobe programs, but there are some useful tips in each.
Good luck,
Hunt -
Premiere Pro CS 6 Will Not Open
My Adobe Premiere Pro CS6 will not open. It tries to open, but does not attempt to load any settings. After a minute, a crash reports shows up.
Computer Info
OSX 10.9.5
Intel Core i7
Intel HD Graphics 4000
NVIDIA GeFOrece GT 650MFirst, OSX 10.9.5 is LONG after CS6 was written, so it may not work at all
But, Some 10.9.x links that may help
-next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936
Second, dual graphics adapters cause problems for many people
-Mac Utility for dual adapters http://forums.adobe.com/thread/1017891?tstart=0
and other general information
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2 -
Adobe Premiere Pro CC 2014 Will Not Open But other App like Lightroom will..
Hello,
Can someone please help with with this problem!?
I have just purchased Adobe Creative Student Cloud (the full set) and my Adobe Premiere Pro CC 2014 won't open when clicked on... however other App like Lightroom, indesign etc will... Can some explain why this is and help me load it up so i can start editing!
Thank you,
Georgeif you failed to reset the preferences, do it manually - Adobe Premiere Pro Help | Preferences
also, make sure your graphics card drivers are up-to-date. -
Premiere Pro CS 6 will not capture 1440 x 1080i footage through firewire.
Every time and without exception, whenever I attempt to capture 1440 x 1080i footage from a Sony camera, the application will crash and close.
My capture settings are as follows:
1) Capturing to external HD
2) DV/ HDV Device Control and
under "Options" I choose a standard
Sony device being that my camera
(HVR-Z1U) is not listed.
3) Using firewire 800
What's going on here? Is there something I am doing wrong. Or is this a bug. Everything else captures fine. For example when I use a Panasonic
DVX or HVX it works perfect.
Please help.
ThanksShockWave101010 wrote:
Thank you Bill, the external HD is connected through high speed usb.
HDV through firewire is not supported. Hard to believe but the response came from Adobe.
Ashamed because I love their products. Oh well.
Judging by the approximate release date of that Radeon HD 6770M (mid-2011) that best USB speed that you have is USB 2. That is not adequate speed wise for any video editing.
I do not know who you talked to at Adobe but here is a paragraph from CS6 help: Adobe Premiere Pro Help | Capture HD, DV, or HDV video:
Capture DV or HDV video
You can capture audio and video from a DV or HDV device by connecting the device to your computer with a FireWire cable. Premiere Pro records the audio and video signal to the hard disk and controls the device through the FireWire port. -
Premiere Pro CC Projects Will Not Be Backward Compatable
This may have been mentioned before, but I have looked through the first two pages without finding a reference. I'm trawling through the CC FAQ, and find lots of answers to questions I was not sure about, but one of the questions is 'Which CC applications support export to CS6?'. The short list of apps that follow does not include Premiere Pro. It seems to me that that also means that if you try the CC for the discounted first year, and decide it isn't right for you, any projects you develop in Premiere Pro CC during that year, can not be taken back to Premiere Pro CS6 for further work. I guess you can import the entire project exported from PP CC, and edit that, but that is not going to be convenient with a multi track, complex project. Am I not thinking this through correctly? (Sorry, the forum won't let me paste the link)
I found the following work-around: not perfect, but quite good.
Premiere 6.5 projects can be directly opened in CS6 or earlier just by changing the extension from .ppj to .prproj
Make a copy of the original .prproj file and name it Name_audio-only.prproj
Export sequence(s) as FCP XML from CC - multiple sequences can be selected OR select Project Panel to export entire project (Attention: Most video - even intrinsic ones like motion, opacity etc. and audio effects are not correctly translated! Check beforehand that all 3rd party plugins are installed in all versions of PPro!)
Save a copy of the project as Name_video-only.prproj and delete all audio tracks or audio clips from all sequences that contain video effects
Close PPro CC project
If the PPro CC project file is compressed, add .gz as extension and extract with 7zip
To disable compression in CC:Ctrl + F12 to open Console, switch to Debug Database View: BE.CompressProject> false
Open in Notepad++
Edit version number change (4th line) from 26 to 23 or 24 and open the project in PPro CS5.0.3 or PPro 5.5.2 and save it.
If there should be a color picker dialogue box while opening click Cancel (as this is most probably for Adjustment Layer which are not supported in CS5.5)
If PPro CS5.5 shows a Log of non-translated effects etc., copy and paste them into a text file with the project name for later reference.
PPro Version numbers:
23>CS5
24>CS5.5
25>CS6
26>CC
27>CC 2014
A simple change to 23 and opening it directly in Adobe Premiere Pro CS6 does not work! (Liegt wahrscheinlich an den Audiotracks, da Projekte mit Sequenzen, die nur Video enthalten, teilw. geöffnet werden können.)
It is possible to open a PPro CS6 project directly in CS5.5 by editing the version number from 25 to 24.
Open this project Name_video-only.prproj in Adobe Premiere Pro CS6 and convert it to CS6 project - now you have all the sequences with the supported video effects
Import FCP XML project file(s) into PPro CS6 and copy the audio tracks from the corresponding sequences (or vice versa: copy video tracks so they align synchronously again)
Gotcha’s:Through Edits, Adjustment Layers, Time Remapping, 3rd party filters, plugins, transitions may not be correctly translated!
PRPROJ File Associations
After installing an update to PPro, Windows will change the default program to the latest program version, e.g. CC. If you want to revert those to CS6, you cannot simply do it with Rightclick>Open with>C hange default program..
There is a way to change the setting in the Windows Registry:
Open regedit.exe as Administrtor
HKEY_CLASSES_ROOT/Adobe.Premiere.Pro.Project. > shell/open/command and change the path in “” to the correct program version.
You can also do a search in the section of HKEY_CLASSES_ROOT/Adobe.Premiere.(with various endings following the word "Premiere") and change all remaining instances. -
Ladies and Gentlemen,
As a faculty member in the School of Music, I have just acquired a copy of Logic Pro 9.1.8 through my University. The programs and instrument packs were installed by our IT department and show as being fully installed on Logic Pro when I search for additional content through the Logic Pro tab at the top of the screen. The window shows that all 6 Jam Packs, Logic Pro & Main Stage Content (Essential and Additional) GarageBand content, and Surround content is installed. However when I try and add a new instrument on a project, most of these instruments cannot be found. I get the following error:
Audio file “KB_pizz_f_C1.wav” not found!
I then press the Continue Tab, and it looks for the instruments in an empty file that Logic creates in the Music section of the hard drive. I have investigated the sounds by going through the MAC Hard Drive>Library>Application Support>Logic>Sampler Instruments folder, and tried to copy the sounds into the Music>Logic folder created by the program. That does not work either. Even attempting to go into these Logic Pro instrument files one at a time has proved fruitless. I am told that the file cannot be opened.
The files appear to be installed, but cannot be accessed or opened. They all have that translucent grey appearance when I attempt to click on the icon. This is true for about 80% of the files in the instrumental library. Whenever I create an instrument, the EVP88 Electric Piano is installed by default. There are a few instruments that I can successfully replace this default instrument with, but a majority of the instrumental library remains unavailable. Can anyone help?Kurt:
You might try a different way of adding the video files to the web page. This demo page has one where the file does not load until the play button is selected: Opening Item in a New, Precisely Sized Window. This demo page has 9 short videos on it using that method: PhotoPresenter Animated Slideshow Themes. Just add a screenshot of one of the movie frames or any photo you want and add the Play button on or below it.
You manually upload the movie file to your server so iWeb is not involved in the uploading the file at any time.
Similarly this demo page, QT movies via iFrame, has a method that has you manually uploading the file to the server and linking to it via iFrame code. That page also has other similar methods.
Another method is demonstrated in Roddy's iWeb for Musicians site on his Video page. Here you also upload manually.
OT -
Problem with Premiere Pro CC _ Will not start
I have the following problem, which I hope you can solve for me. There are written the following text when the program started up:
"" Premiere Pro CC has stopped working and the Adobe Media Encoder has stopped working
A problem caused the program to stop working correctly.
Windows closes the program and notifies you if a solution is available. ""
What is wrong, can I possibly do anything to get it to work properly again?
Sincerely, Jan Michael Nielsen. Billund. Denmark.More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
Maybe you are looking for
-
Error code 2343 when trying to install update on windows 7
When trying to install the updates to Itunes get this error message. Have tried the downloads direct method, turning off the firewall with same result. How can I get it to accept the update
-
Email sender's name incorrect - can I change it?
Emails I receive from one person are labeled as coming from "Verizon" instead of the person's name. I have the person correctly entered into my Contacts Book and I think that messages I send from my email are correctly addressed. Can I edit the name
-
Issues with windows updates, unable to install certain updates
Hello, I have been having some big issues with installing a majority of windows xp updates. Here are the updates i cannot install. *Security Update for Microsoft .NET Framework, Version 2.0 (KB928365)* *Windows Internet Explorer 7 for Windows XP* *Se
-
i am using fieldpoint 2.0 and labview 6i to monitor my system, but i think i don't have labview DSC.
-
Hello, I'm trying to install my printer with windows 8.1 64bit and my error reads, "failed installation" but it doesn't give me a reason... Can someone help me please