Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

My XP machine crashed, I reinstalled Premiere Pro 2.0 with Windows 7, and I got the following error: 'The Currently installed soundcard driver does not support Direct Sound Input. Recording audio is not possible.' The soundcard drivers are updated. Any ideas? Here's what I have: AMD Phenom II X4 965 Processor 3.40 GHz 8 GB, 64 bit. Thank you for looking.

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

Premiere Pro 2.0 and Windows 7

Is Adobe Premiere Pro 2.0 (and other software included in ProductionStudio PRM 1.0) supported by Windows 7?

Harm,
Is it really that easy? So, there is no need to download Windows XP Mode and Windows Virtual PC (http://www.microsoft.com/windows/virtual-pc/default.aspx)?
Of course I would prefer to upgrade to at least Adobe CS4 Production Premium, but the best price I could find was $400 on studica.com. Or I could upgrade my Adobe Production Studio Premium to CS5 Production Premium for $800. But, these are not options for me right at this moment.
Thanks so much,
Angela

Premiere Pro 6.5 and Windows 7

I am using Premiere Pro 6.5 in Windows 7 but I have found it impossible to display on two monitors, I like to extend the Timeline and have "Monitor" on the second display. Anyone know why I cannot get dual monitors"
Thanks.
George Perry

>was told it would run on Win7 Home Premium.
I suggest you find the person who told you that, and ask how
>It ran O.K. in dual monitor mode in Windows XPPro
The link I provided has a link to a Microsoft product to create a "virtual XP" session that worked in that case
But that Microsoft product requires at least Win7 Pro to run, so you can't use it with your current setup
I still use Premiere 6.5 to be able to operate an old Pinnacle Dv500 card to (slowly) digitize my old collection of VHS tapes before they won't play
I do this by dual-boot (aka multi-boot) with WinXP on one section of my boot drive and Win7 Pro 64bit on another section to run CS5
If you have a WinXP install CD, go to http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US and do a search on dual boot or multi-boot to find out how

Premiere Pro is slow and crashes. Is my system the problem?

Bottom line:
What can I do to make Adobe Premiere run more smoothly on my computer? Once I do any kind of simple modification, such as color correction, I cannot preview unless I render, and rendering takes an exceedingly long time. I also experience frequent program crashes.
Here's my system specs:
Mac OS X Version 10.5.8
Processor: 2 x 2.8 GHz Quad-Core Intel Xeon
Memory: 10 GB 800 MHz DDR2 FB-DIMM
Software:
Adobe Master Suite CS4
**Two of my three drives are really full. My documents drive has 15.27GB available, another drive has only 2.79GB available, and the last has 45GB available. Perhaps this contributes to the speed issue?
Here's what I figure my options are:
1) Upgrade to CS5.5
2) Clear more space on my drives
What's your advice? Is it my system or is this just how Adobe Premiere Pro runs? Do you believe I'd have more success with CS5.5?
Your advice is much appreciated!!

Get more drives and clean the existing ones.
Once your fill rate on a disk goes over 60%, performance goes down rapidly.
CS5.5 will not help till you have cleaned up your disks. Make sure your disks are not filled beyond 50% of their capacity.

Pp 2.0 and Windows 7 sound problem

I received the error "The currently installed sound card driver does not support direct sound input. Recording is not possible." I tried many of the solutions offered on forums. This is what I found worked for me. (I have an HP with realtek hd audio)
I plugged in external speakers.
In adobe I went to Edit, Preferences, Audio Hardware, selected Pp windows sound, clicked on ASIO settings. For direct sound output ports I only have speakers selected and "Yes" for sync reference. For direct sound input port I have stereo Mix selected and sync reference no. To the left I have "Direct Sound Output", "Full Duplex", and "Start Input First" selected.
In my computers control panel under sound I have "speakers" selected as my playback and "stereo mix" selected as my recording.
I hope this helps others who like me are not computer savvy.

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Sound input plot update problem

Hi,
I am having some problem regarding the plot of the sound input signal. Specifically the problem is regarding the update of the waveform graph i have used.
the update is not continuous mode. And there are gap in the waveform
can anyone help me
Attachments:
Continuous Sound Input.vi ‏20 KB

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Sound Blaster, Adobe Premiere Pro 1.5 and ASIO st

adobe premiere pro .5 does not recognize my sound blaster card as a 5. surround card... so i can't mix in surround sound... the only input/output device in premiere is the default windows sound .5.... when you look at the list of speakers in premiere it only shows two speakers with SB Audigy sound card, instead of the 5. surround speakers. does anyone know what to do about this? sorry about the long post.

I don't know, but go to this Tutorial http://windowssecrets.com/newsletter/using-windows-7s-xp-mode-step-by-step/ and read

Premiere Pro CS5 Playback and Performance Issues

I upgraded (2) separate editing work stations to CS5 from CS4 about a month ago. I moved from 4 to 5 to try and get rid of some problems which both work stations were encountering.
The problems since the upgrade are similiar: playback from timeline has intermittent audio drop out and video going to black during playback, (new one)-video locked up but audio kept playing-system hung and had to be rebooted.
Also, when clicking around on the timeline or scrubbing the timeline, Premiere crashes.
This type of performance on playout or timeline usage is consistent on both machines which have indentical setups and builds. None of this happens all the time but happens enough to causes problems with workflow. We edit on the work stations, dub files to playback system for air, and use a shared server to move files back and forth as needed but files are always stored locally instead of using straight from server.
These machines are:
Premiere Pro CS5.02
OS WIndows 7 Pro 64 bit
12 GB Ram, DDR3-1333 (6-2GB modules)
CPU Intel Xeon Quad Core [email protected] GHZ, 2 processors, 8 MB Cache
500 GB SATA 2 hard drive, 7200 RPM, 32 MC (System Drive)...309 GB of space avail
(3) 1 TB SATA 2 hard drives, 7200RPM, 32 MC (3 TB, RAID0 STorage) 2.16 TB of space avail
Nvidia GE Force 9800 GT Graphics card, DUAL DVI, 1 GB
REaltek High Def Audio, Drivers 6.0.1.5953
(1) monitor in use
output of system runs to ADVC-700 breakout box to feed playback system
I have all of my software installed on C: (309 GB of 500 GB avail)
I have all of my videos files stored on D: (Raid Storage with 2.16 TB of 3 TB avail)
The only changes I've made since installing CS5 would be to change the auto save from 20 minutes to 60 minutes. Don't know if an auto save would cause an issue on playback as I've noted above.
I'm not a computer whiz by any stretch of the imagination but I can follow directions if given for testing/eval.

Do the PPBM5 Benchmark and send the results to me by PM, in addition to sending the results to Bill as indicated. I'll have a look at what might be going on here.

Why does Premiere Pro blue-screen if Windows Audio Service is enabled?

Since I enabled ASIO in Premiere Pro, I have to remember to disable the Windows Audio Service before starting Premiere Pro, or else it will blue-screen at some point, usually after I pause playback of a video clip. It only happens in ASIO audio mode, and completely goes away if I disable Windows Audio. Something is interacting badly between the Premiere Pro ASIO driver and the Windows Audio service. The error message has something to do with USB host or something like that...I don't have it in front of me right now.
I tried to create a batch file to disable the service, then run Premiere Pro with "start /wait", then re-enable it when premiere is closed, but Premiere Pro cannot be run by that command, unlike every other executable I've ever used it on. It just doesn't come up. So I tried with a Powershell script instead, and when doing the equivalent in Powershell, Premiere Pro starts, but the window is blank and hangs forever until you kill it by clicking the X. I would be fine with a scripting workaround, but Premiere Pro is really really really resistant to that apparently, so my only option is to remember to disable it manually EVERY SINGLE TIME. It's just annoying when I forget to disable it and then I lose work, and probably hard drive clusters, when the blue-screen comes. And if I want to export something to another program in the suite that doesn't use ASIO, I won't be able to play audio without closing Premiere and fiddling with the service.
Here are the specs that might be relevant:
-Windows 7 x64
-M-Audio FastTrack Pro sound card (usb) [latest drivers]
-12 GB RAM
-Intel core i7
-gtx 460 video card with the ini file CUDA hack

I'll make sure to do that. But in case the bug takes a long time to fix or gets pointed to M-Audio, who will most likely not ever fix it if it's in their stuff, does anybody know how I can get the batch file and/or powershell solution to work? I don't really get why Premiere Pro would know or care who launched it as long as it launched in its own process.

Why is Dynamic Link between Premiere Pro CC 2014 and After Effects CC 2014 not syncing audio changes?

When I try to use a Dyamic Link between something I've cut in Premiere and a composition in After Effects, if it is simply an audio level change it will not update in AE. Only if I alter the Video track does it then take the changes reflected. Any suggestions as to what is causing this?
Running Adobe Premiere Pro CC 2014 and After Effects CC 2014.

As Dave alludes, AfterEffects is all about the visual changes ... or at least, mostly. For changes to the audio outside of PrPro's internal controls, highly suggested you use Audition instead. It is all about the sound ... and yes, will update PrPro when used correctly.
Neil

Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few m

Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few months and updates ago

I tried your suggestion, not knowing that the direct pdf printer would also "save as" PDF, but when I try your suggestion and use the Adobe PDF printer that is a direct creation of the PDF from the browser (IE9), instead of the "black out" areas I get when I use the "Convert to" button, I get missing blocks of the resulting PDF, and only get the first 1/4 to 1/3 of the webpage.
Just to clarify, when I said I print the webpage and then scan, that is a work around I have to do if I need a scanned version of the way a webpage appears on a particular date and time, instead of the one step process I used to be able to do when Adobe Acrobat would actually convert the webpage to a pdf without blackout areas or, if I try your suggestion, blank spots with a partial webpage. But the idea was one I had not thought of and I appreciated the thought.
Yes, Acrobat was updated, and is updated, and was working fine until a few months ago, Win 7 and Office 32 bit versions, Office 2010

Premiere Pro CC 2014 and Radeon R9 295x2 issues

Just added the R9 295x2 to my system and have experienced a few issues. I installed the Catalyst 14.12 with the newest drivers and when OpenCL acceleration was enabled there was no video display at all in the source or program monitors. Is Premiere not yet supporting these newest drivers? I instead tried installing the previous driver, 14.9 and the issue was resolved. However I now have the issue of tearing during playback. I have an NEC 4K monitor and when I enable playback to this monitor it displays tearing on playback of both 1080 and 4K files. Hoping to get this issue fixed and perhaps the newest drivers can be supported and resolve all issues?
Windows 7
4930K CPU
Radeon R9 295x2
512GB SSD
32GB RAM
27 inch Asus 1080p for GUI
24 inch NEC 4K for playback
Thanks.

Take a look at your GPU usage with something like GPU-Z to see if both Premiere versions are using the same amount of MPE GPU hardware acceleration. Actually with CC 2014 it might work faster because Adobe added in more 4k effects/features for GPU acceleration.
You might want to download our Premiere Pro BenchMark (PPBM) and run it on both versions. The H.264 very complex timeline has 4K material in it and usually shows Premiere Pro 8.xxx take about only half the time that Premiere Pro CS6 take to export that same timeline.

How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

How do I convert my Windows 7 Folder to an ISO image to burn to my USB Flash drive (16GB) in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

Sorry - confusing - My question has NOT been solved yet - can anyone help?

How to work with Premiere Pro cs5.5 and After Effects cs5 together?

I have edited my movie in premiere pro cs5.5 and made the rough cut. In premiere, i have edited the video, put in soundtrack and foley. Now, i need to add muzzle flashes & blood splatters in some scenes and final color correction using After Effects cs5.
When i import the premiere project in AE and make the changes, and then i export it back as premiere project. When i open this prmiere project, it shows vaious kind of errors and no changes are retained that i did in AE. Also, when i import the premiere project (which has 4 different sequences) in AE, all the media that has been imported in the premiere project also opens in AE making it difficult to organize the media.
How should i work now so that i add vfx and color correction using AE cs5?
I thought of exporting the video from Premiere pro and then open the video in AE and add vfx to some scenes and color correction to the full video and render it out again. But, this is the first time i am using AE and i am not sure if this is the best way. PLEASE HELP.
Or, i could import the whole project in AE, add vfx, do color correction AND then export to video from AE. But i think, it will be better if i export the video from Premiere as it has loads of options to choose from while exporting to a movie.
The dynamic link does not work between Premiere Pro Cs5.5 and After Effects cs5. Even if it does, its not working on my pc.
All the footage is in HD and i want the final result in best quality HD too. PLEASE Help!

If you are working between After Effects and Premiere Pro but with versions that are not the same number, you need to just work with movies rendered and exported as intermediate, lossless files.
Dynamic Link only works between After Effects and Premiere Pro of the same version number, and only when they are installed as part of the same suite.

Premiere Pro CC Source and Program Playback Controls not working.. help please.

Hi,
Need your help to find out why none of the Premiere Pro CC Source and Program Playback Controls are working.. I can do playback using spacebar, but not clicking on the controls... same goes the rest.
Thank you,
Mauro

Dear Mark,
Thank you for the hint/link, reseting the toolbar did the trick.
Regards,
Mauro

Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

Similar Messages

Maybe you are looking for