Premiere pro 2 not importing sound
ok i'm importing an avi into premiere pro 2 and its not getting the sound
when i import the same avi into after efects cs4 the sound goes in fine
any reason for this
thanks
The first question at the end has a link to GSPOT
First, work through all of the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of that link
Similar Messages
-
In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC. They say it could have been a Windows update? Is anyone else having this problem and found a solution any suggestions.. Thank you.
Hello, thank you for your help. I finally was able to contact someone from Adobe on line.. It took about 1 hour on hold but I finally won the lotto...Lol. Pr.. /Project/Project Settings/General/ I had the (Mercury Playback Engine GPU Accelerated (CUDA) and not the (Mercury Playback Engine Software Only) It only took 1 second for Adobe to figure it out...Lol.
Although I have a high rated Nvidia card that did handle the software for some time after a hack, I believe a Windows update may have altered my Premiere Pro CS6 settings.
Video card is Geforce Nvidia GTX 765M non compatible with (Mercury Playback Engine GPU Accelerated (CUDA). Thank Ronin Edits and cvid01 -
Can Premiere Pro CS4 import H.264 quicktimes?
Can Premiere Pro CS4 import H.264 quicktimes?
If the QT's are pure H.264, and you have that installed, then there should not be an issue.
Some camera mfgrs., and others, like to tweak H.264, so there is no all encompassing answer.
If you are having issues with a QT file, that seems to be H.264, you might want to look closely at the full specs. in MediaInfo, just to be sure that all settings match what they should.
Where did these files come from? That might tell the tale.
Good luck,
Hunt -
Adobe Premiere Pro Help | Importing still images
This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/importing-still-images.html
I might be incorrect in this, but think that there is a Ps Script, that will do what you want.
I would ask in the Photoshop Forum: http://forums.adobe.com/community/photoshop
and also in the Photoshop Scripting Forum: http://forums.adobe.com/community/photoshop/photoshop_scripting?view=discussions
If my memory is not totally hosed, one of those should yield the Script (if it exists, as I claim to remember) for that task.
Good luck,
Hunt -
Why Does Premiere Pro CS4 Import Only 10 Seconds Of Layered Photoshop CS4 .psd??
Why Does Premiere Pro CS4 Import Only 10 Seconds Of Layered Photoshop CS4 .psd??
I have a 24 second clip I layered in Ps and when I import the psd into Pr THE SEQUENCE IS ALWAYS ONLY 10 SECONDS!
How can I change this? Why does this happen? I really need to know as soon as possible. I have a video project due this Wednesday (granted it's for an AV class where I'm just learning Pr. But I can learn VERY FAST!)
Thanks for your help.
--OSXniCKelsJust in case I wasn't clear in my last line "just Click-drag on the Tail of your .PSD to set the desired Duration," once you have Imported your .PSD (as Footage), just drag it to the Timeline, Click-drag on the right-hand margin (the Tail) and stretch out its Duration, as is required.
Now, if you Imported as a Sequence, open that Sequence's Timeline, and do the same.
I normally will set my Edit>Preferences>Still Duration to about what I think will be applicable, do my Import, and then with the Info Panel handy, just alter the Duration to suit.
Good luck,
Hunt
PS - Welcome to the forum. -
In Premiere Pro 2014 imported audio skips and is out of sync - version 7.2.2 was ok
I have been importing AVCHD Content in to Premiere Pro 7.2.2 with no issues. Now that I have upgraded to Premiere Pro 2014, importing that same AVCHD footage causes the audio to skip and finish before the video causing it to be out of sync. I compared preferences between the 2 versions and all settings seem to be the same. This is something clearly different between these two versions of Premiere Pro. Anyone else have this issue?
Here is some additional info:
AMD Radeon HD 6770M:
Chipset Model: AMD Radeon HD 6770M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x6740
Revision ID: 0x0000
ROM Revision: 113-C0170F-175
EFI Driver Version: 01.00.560
Displays:
iMac:
Display Type: LCD
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort -
Premiere Pro CS6: No sound importing .mts files
Hey,
My Setup:
- Adobe Premiere Pro CS6
- Windows 7 x64
My Problem:
I bought a DLSM (Panasonic Lumix G6H) and recorded five hours of footage using AVCHD 50p. I imported the .mts files into Premiere and got no sound at all. Whenever I open the .mts with VLC or WMP there is sound.
I spent numerous hours trying to find a solution for this problem, but unfortunately none of them worked for me.
At this point I'm quite frustrated, I NEVER create accounts to ask questions, because usually they are answered - but this time i couldnt manage to overcome this issue.
I already tried:
1) Copy the entire folder structure - didnt work
2) Rename the .mts to .m2ts - didnt work
3) Using the Media-Browser when importing the files - didnt work
4) Rename it to .avi - didnt work
5) Downloaded "Any Video Converter" as my last resort.. there is no option for 50p .m2ts (which might work) - not satisfyingMore information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
Are you allowing time for conforming?
Read Bill Hunt on Audio Conforming http://forums.adobe.com/thread/726693 -
Change default Premiere Pro CS6 importing of files so it's NOT alphabetical
With Premiere Pro CS5, I was able to import my Photoshop files with multiple layers (shapes, text, images, etc) and they would appear in order of Photoshop organization. For example:
Layers in Photoshop CS5:
Logo
Address
Main Text
Background
Importing them into Premiere Pro CS5:
Logo
Address
Main Text
Background
Notice the order stays the same.
Now that I have purchased CS6, everytime I try to import the layers into Premiere, they are imported alphabetically.
Layers in Photoshop CS6: (still same)
Logo
Address
Main Text
Background
Importing them into Premiere Pro CS6: (now alphabetical)
Address
Background
Logo
Main Text
How do I change the default setting so it imports in the same order as Photoshop? I would like this version to be the new default as I use this everyday for work.
Any help would be appreciated.
CS6 newbie, CS5 intermediateIn both cases, the PSD imported in the exact order I had it in Photoshop. I even went back into Photoshop, changed the order, reimported and it came in with the new order. So unfortunately, I'm not able to reproduce the issue. Which means I have no means to find a cause or test a fix.
-
Premiere Pro not sending files to After Affects "The importer reported a generic error"
Hi all,
I just recently purchased PP & AE CC. putting together my first project on my new laptop and when i go to right click a clip on my Premiere pro timeline and proceed to push "Replace with after effects composition" It swaps to After Effects but nothing loads, i alt tab back to Premiere and it displays me the message "The importer reported a generic error"
If it's any help the footage is from my A7S filmed in SDXC format. everything works fine within the project. I've tried logging out and in of my adobe account updating restarting etc. had no luck.Hi Brandon,
ascarib wrote:
After doing the reboot my computer gives me the "You can't use this version of the application "Adobe After Effects CS6" with this version of OS X. Nothing has changed on my computer but it was fine before. What else can we try? Thank you for your patience.
Make sure that you update After Effects: Can't launch | Mac OS X 10.9 (Mavericks)
Thanks,
Kevin -
Problems with Premiere Pro 2.0: sound lost after clip pasting
To integrate small projects to one bigger Project, it used to work well with Premiere Pro 1.5 in the following way: import small projects into the main sequence of the new project and, in parallel, copy the clips from the timeline of the small projects and past them into the timeline of the new project. However, I am encountering the following problems while trying to do the same thing with Premiere Pro 2.0:
· Video and sound of every pasted clip becomes unlinked.
· Although the sound was there (also shows in the wave view) right after the pasting and it can be rendered, but the audio Information gets lost as soon as I exit the new project (saved beforehand). If I re-open this new project, although the timeline shows all the pasted sound clips, but there is information in them - no sound (the wave views show only straight lines).
· As well, some of the video and audio effect settings get lost (e.g. cross fading), but the effects such as brightness and contrast settings always remain.
· At least one thing seems to be sure: the imported files themselves are ok. Newly created clips in the timeline from those imported files (dragged into the timeline) are fine - no information lost.
All tips are great helps. Thanks in advance.I got it!
Though not described in the English HELP, but in the German HELP: I have to press the Shift and T Keys. It works in my case with the following steps:
1. Mark the corresponding audio and video tracks
2. Put CTI over the clip
3. Press shift + T
4. Double click the clip
5. Eventually I have to repeat and press the keys shift +T again.
Thanks a lot once more for all of the hints and the detailed explanations. It is indeed a great help. I really appreciate it very much.
tryerlu -
Premiere Pro CS6 importing/ audio and video problems
I recently recorded gameplay from my xbox, when i open this recording using windows media player it states that the video is 3 hours 30 minutes long, which is correct, when i then import this into premiere pro, premiere pro changes it to be 5 hours and 44 minutes long, when i then play this back it plays in slow motion and audio and video start to desync, i thought it may just be the source editor playing up so i made a clip and put it into the timeline and it still had the same outcome. The speed/duration are still on 100% so im not sure what to do, anyone have any idea as to what this is, or why it is happening?
What are the attributes of your PVR video...
specifically, is it variable frame rate?
Media file evaluation utilities:
GSpot
http://www.headbands.com/gspot/
MediaInfo
http://mediainfo.sourceforge.net/en
If it is VFR, Premiere no-likey.
Variable frame rate video problems:
http://forums.adobe.com/message/4897424#4897424
http://forums.adobe.com/message/4071506#4071506 -
Premiere Pro CS6 importing .mp4 = "The file has no audio or video streams."
Hi,
When I import an MP4 clip into Adobe Premiere Pro CS6, I get the following message:
"File Import Failure
151_0010_01.mp4
Error Message
The file has no audio or video streams."
I have the latest Quicktime, and I have reinstalled Premiere Pro CS6 a few times already. If anyone knows a fix for this, I would greatly appreciate it. My system and clip info are found below. Thank you, Robert.
OPERATING SYSTEM
Win 7 Ultimate 64bit
CLIP INFO
Complete name \BPAV\CLPR\151_0009_01\151_0009_01.MP4
Format : MPEG-4
Commercial name : XDCAM EX 35
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 1.76 GiB
Duration : 7mn 5s
Overall bit rate mode : Variable
Overall bit rate : 35.6 Mbps
Encoded date : UTC 2009-07-19 04:22:10
Tagged date : UTC 2009-07-19 04:22:10
Video
ID : 1
Format : MPEG Video
Commercial name : XDCAM EX 35
Format version : Version 2
Format profile : Main@High
Format settings, BVOP : Yes
Format settings, Matrix : Custom
Format settings, GOP : M=3, N=15
Codec ID : 61
Duration : 7mn 5s
Bit rate mode : Variable
Bit rate : 34.0 Mbps
Maximum bit rate : 35.0 Mbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 1.231
Stream size : 1.68 GiB (96%)
Language : English
Encoded date : UTC 2009-07-19 04:22:10
Tagged date : UTC 2009-07-19 04:22:10
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
Audio
ID : 2
Format : PCM
Format settings, Endianness : Big
Format settings, Sign : Signed
Codec ID : twos
Duration : 7mn 5s
Bit rate mode : Constant
Bit rate : 1 536 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 77.9 MiB (4%)
Language : English
Encoded date : UTC 2009-07-19 04:22:10
Tagged date : UTC 2009-07-19 04:22:10I encountered a similar problem. I had quicktime files that would play in the quicktime player from the desktop, but wouldn't import the files "the file has no audio or video streams". I had just reinstalled quicktime, and Premier with no change. Finally realized that we had Barracuda protection that was at fault. It was preventing communication to the quicktime codec and thus Premier could not interpret the footage. Another symptom, I would also launch After Effects and it would tell me that quicktime wasn't installed.
I solved this by uninstalling Barracuda. We reported the fault to Barracuda, and have not seen any change in the software. -
Premiere CS5 not importing .mov files - codec missing or unavailable
Hi,
I'm on a Windows 7 PC running Premiere Pro CS5. Have encountered a problem with .mov files that I haven't had before. I recently received three files from a shoot at a local tv station. They are .mov files and I believe they are in an XD CAM wrapper or format. I've gotten files from this station before and have imported them with no trouble (not sure if the earlier files were XD CAM, though). When I try to import, I get the error message: Codec missing or unavailable. Would using the Prism video convertor to convert to another format be the way to go? The file sizes range from 7.18 GB to 14.9 GB. Thanks in advance.Here's more info on the above clip:
General
Complete name : F:\FLV Projects\TalkingMatters\Leah Fabiano-Smith121312\Smith01.mov
Format : QuickTime
Format/Info : Original Apple specifications
Format_Commercial_IfAny : XDCAM EX422
File size : 15.0 GiB
Duration : 38mn 58s
Overall bit rate : 55.0 Mbps
Encoded date : UTC 2012-12-13 08:53:51
Tagged date : UTC 2012-12-13 08:53:51
©TSC : 2997
©TSZ : 100
Video
ID : 1
Format : MPEG Video
Format_Commercial_IfAny : XDCAM EX422
Format version : Version 2
Format profile : 4:2:2@High
Format settings, BVOP : Yes
Format settings, Matrix : Default
Format settings, GOP : M=3, N=15
Codec ID : xd5b
Codec ID/Hint : XDCAM
Duration : 38mn 58s
Bit rate mode : Constant
Bit rate : 50.0 Mbps
Width : 1 888 pixels
Original width : 1 920 pixels
Height : 1 062 pixels
Original height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:2
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.832
Stream size : 13.6 GiB (91%)
Language : English
Encoded date : UTC 2012-12-13 09:33:19
Tagged date : UTC 2012-12-13 09:33:19
Audio
ID : 2
Format : PCM
Format settings, Endianness : Big
Format settings, Sign : Unsigned
Codec ID : in24
Duration : 38mn 58s
Bit rate mode : Constant
Bit rate : 4 608 Kbps
Channel(s) : 4 channels
Sampling rate : 48.0 KHz
Bit depth : 24 bits
Stream size : 1.25 GiB (8%)
Language : English
Encoded date : UTC 2012-12-13 09:33:19
Tagged date : UTC 2012-12-13 09:33:19
Menu
ID : 3
Language : English
Encoded date : UTC 2012-12-13 09:33:19
Tagged date : UTC 2012-12-13 09:33:19 -
Flash CC 2014 will not import sound
I am having issues with my Flash install at home where it won't import aiff or wav files or even mp3s... I throws up this error
Flash recently updated at home here and I notice that the docked color palette on the toolbar is offset while the one at work is not. In the below two images, you can clearly see that the palette is offset above the Bucket swatch but below in the second screen cap. Same build too 14.2.0.20
Home
Worki don't know what could be the problem if both flash pro versions are the same (make sure one's not updated beyond the other), but if it's your flash pro you could try:
1. resetting your preferences
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
2. if that fails, uninstall flash pro, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then reinstall. -
Right so a while back, my computer experienced some sort of malfunction in which I had to wipe my main SSD on which the system was on. I had (legally) Adobe Master Suite CS6 on my other hard drive that was dedicated for software and what not. This particular drive I did not wipe, only the SSD with the system. It all worked out mostly fine (the computer restoration), except when I went ahead and plugged my hard drive with all the software on it back in, most of the adobe software no longer worked (Premiere Pro of which the most important of the bunch to me included). I tried dosome tweaks, but nothing seems to work. All I get now is a screen that says "sign in required" (even though this is not a trial) and after that "licensing stopped". What should I do?
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
Maybe you are looking for
-
File not found in xcode4.6
My code was build with Xcode version 4.5.2. But now i upgraded to Xcode 4.6. Code started give error like <wchar.h> file not found. I am building my code using terminal & i have included <iostream> that includes <wchar.h> internally. Please suggest w
-
Linking to a specific panel from another page and from higher up on same page Spry-UI-1.7
Hi all, I am using Spry-UI-1.7 for a 4 tab tabbed panel on the bottom of my home page. I'd like to link to the second tab from another page and also from the top of the home page. I previously used method: http://foundationphp.com/tutorials/spry_url
-
How can i find the iTunes U in my iPad mini?
hi, i downloaded the iTunes U in APP's store on my iPad mini, but it doesn't have a shortcut in the homepage. how can i find it out? i feel so doubt of it. do i need to find it out by searching in APP's store??
-
Superscript Font name in Reports 6.0
Forum, Suggest me to find a appropriate font name to get the superscript (like SM service mark and TM trade mark) or let me know how to create superscript in reports layout. Thanks Natarajan,
-
Can't Set CardBacks in Klondike
I recently learned of the capability to set card backs in Klondike and tried it out Klondike then reset my statistics except for $50 something dollars and set my average as -$47 I have an iPod classic 6th gen 80GB and I know someone else had this pro