Premiere Pro 2014 CC - rendering errors

Hi I get the attached message a lot on projects...ist only after rebooting several times does this error go ...is this error a bug ??
I created a new project and imported the old one in it but issues remain... it had no plugins so thats ruled out... would love to hear from the community ...cheers

Please see this thread: "Error compiling movie. Unknown Error." OR program crash when rendering

Similar Messages

Premiere Pro 2014.1 rendering slower?

Is anyone else finding rendering slower with 2014.1? My hardware configuration (PC) used to render my sequences in about real time but now they're taking about 2X real time. I've got the same NVIDIA GPU I had before, have updated the drivers and PP says it will use it but I see no activity on it now. It's hard to compare because I can't go back to 2014. I get the same time whether I queue the render to AME or do it totally within PP. I'm tempted to go back to CC (pre-2014) and make some comparisons but haven't done it yet.

I gather that by "render" you mean exporting to encode an output file, yes? With Premiere, we generally reserve the term "render" specifically in reference to rendering preview files for smoother playback within Premiere; for creating an output file, we use the terms export and encode. I'm not saying "render" is incorrect--I know that's the common parlance with other NLEs. Just calling it out to help avoid confusion hereabouts.
As to the actual issue:
what format & preset (or custom settings) are you using?
Are you sure that all the export settings are the same as before? Any chance that before you were encoding VFR, One Pass but now it's Two Pass, for instance?
When you say "PP says it will use [the GPU]," do you mean that in the Project Settings panel, Renderer is set to GPU?
Exactly what graphics card do you have, and what driver version?
Is this a project created in a prior version and converted to 8.1? If so, can you toss together a simple sequence in a fresh 8.1 project and see if encode times are longer than expected?
If it's a new 8.1 project, are all the particulars of the sequence roughly the same: resolution of the source; sequence settings, including the Preview File Format/Codec; effects in use, ...?
As to the fact that the GPU shows no activity, that may be expected. In case you're not aware, the GPU is not used for all encoding. See this thread for more info: Mercury, CUDA, and what it all means. Of course, if we're dealing with a pretty clean apples:apples comparison and you checked GPU usage while encoding in prior versions, then you know for sure whether 2014.1 brought a change.

Premiere Pro 2014 MultiCam forgets cut points when rendering (Adobe please help!!)

I have started using multi-cam and notice that almost always when using multi-cam the rendered results are incorrect - with many camera selections forgotten or flipped to exact opposite!
Very frustrating - especially since you discover after render!!
Many times when I select Camera A at some point and then later go to beginning of sequence - many of the selections have been reversed with reversal again at clip transitions - resulting in exact opposite of what I selected or random changes. Locking the tracks does not prevent this. It seems to be overriding my choices based on some program logic!!
This is with latest Premiere Pro 2014.1 {8.1 build)
Useless feature if you cannot get it to render your selections but rather random selection
Wish there was a manual! And not just incomplete video tutorials that are teaser for some associate's paid training (of unknown value).
Or at least quick forum / support response from Adobe representatives so I can be productive with the tooling.
Another week of no answers and I will have to recreate in FCP X where multi cam seems to work fine.
Not the best for brand loyalty, eh?
Please help

I'm thinking it might be operator error on this one. Here's a process that works every time.
1. Create a sequence matching the specs of your footage.
2. Add your clips.
3. Sync manually.
4. Create a second sequence matching the first.
5. Nest the first sequence into the second.
6. Right click on that nested sequence and choose Multi-Camera>Enable
7. Turn on the Multi-camera view in the Program Monitor.
8. Play the sequence in real time, switch angles using keyboard shortcuts. If you make a mistake, leave it for later.
9. When you're done with the first pass in real time, go back to the normal view in the Program Monitor.
10. Move through the sequence a second time, cut by cut, tweaking as necessary with the Rolling Edit tool (shortcut N).
On a side note, 2014.2 is actually the current version. You should update.

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of a solution." When I used the trial I never received this message. Now after purchasing it I receive this error each time I open PP and am unable to use. it. Any ideas or support to fix this issue?

What does the detailed crash report say?
And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

"Adobe Premiere Pro 2014.1 has stopped working" Open Project Error

Hey, everyone.
I recently tried to re-open a project file that I created earlier today. As soon as it loads, the familiar "Adobe Premiere Pro 2014.1 has stopped working" window comes up.
I created a new project file and it seemed to work fine. When I first started this project, I was having trouble using a ".m2ts" AVCHD movie file (PPro would crash in a similar manner), so I used Media Encoder to change it to a ".mov" Quicktime file. Seemed to work fine after I did that. This new issue only arose once I tried to re-open the project file after shutting down the computer.
Got any suggestions?
-Ross

Correction - I converted the ".m2ts" file to an ".mp4" file, not an ".mov" file.

My Program and Source Monitor Stopped Working: Premiere Pro 2014

Heres how it all started.
I got an error which said I didn't have the correct video modules, then came the ugly face of BSOD. I restarted, tried again, same result. I did a system restore with Windows, reinstalled Windows 8.1, reinstalled all of my plugins and Adobe CC programs, and when I opened my project was completely scrambled. Uninstalled all Adobe software, ran CC Cleaner, reinstalled. This got the audio in my videos to work but now there's only a white screen on my my Source and Program monitor when I try to play my timeline. I did another system restore on Windows, went to my laptop manufacturers website and updated my bios, graphics driver, and processor. Also reinstalled windows updates, and my Adobe software, I've tried CC Cleaner before each install, tried going back to the previous version of Premiere and still nothing in my source or Program monitors.
MSI GE70
Intel Core i7 4700MQ Processor
NVidia GeForce GTX 765M / 2GB GDDE5
12 GB Memory
using .MTS footage from a Canon C100
Premiere Pro 2014.2
Things I've tried from other threads:
-I read that there might be a problem with the .MTS files so I've also tried starting a new project with .MOV files and h.264 and still nothing.
-I tried going into the project settings and choose "render with software", still nothing.
-I tried emptying media cache files under C://users/my user/app data/roaming/Adobe/common.....you guessed it, NOTHING.
-I tried using my daughters "Frozen" magic wand we bought her for Christmas to fix the problem with icy magic like Elsa did in the movie.......surprisingly, still nothing.
Any other ideas out there?

Hi,
Do you have Dual Graphics Adapters? You can check that under Device Manager > Display Adapters.
If yes, Disable Intel Graphics and see if it helps.
Have you tried to Trash the Preferences?
Rename the 8.0 folder to trash the preferences: <drive>\Users\<username>\AppData\Roaming\Adobe\Adobe Premiere Pro\
Thanks,
Rameez

Premiere Pro has encountered an error. CS6

Dear Adobe Community
I would be grateful for some help as Premiere Pro has begun crashing on me.
I am using CS6 - on two different Mac computers that both encounter the same problem. I am making a film 1920 x 1080 made up of almost 60 smaller films of 180 x 180 pixels with a color matte underneath them. Everything had been going fine and I was able to export three different versions of the film. Now unfortunately it no longer works!
Using the same process, that I used before that worked successfully, I select all the elements of the timeline and try and nest them. At this point I get the following error message:
Premiere Pro has encountered an error.
. [/Volumes/BuildDisk/builds/tightykilt/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/S equence/LinkContainer.cpp-245] Continue
On pressing Continue - it "quit unexpectedly".
I've tried using a different Mac and have the same problem.
I tried slim lining the project to just the assets that I'm using, saving and rendering and saving and it still keeps on crashing like this.
I would be grateful for any help or advice.
Thank you very much!

Which operating system?
Yosemite sometimes has problems, often related to "default" permissions needing to be changed
-one person's solution https://forums.adobe.com/thread/1689788
-and a Java update https://forums.adobe.com/thread/1507936
-update may break things https://forums.adobe.com/thread/1772260

Premiere Pro has encountered an error - Mac 10.9.4

Hi,
I’ve just downloaded and installed (twice) premier pro (CC 2014) and am receiving this error message when I attempt to launch the program:
Premiere Pro has encountered an error.
[/ppro801/releases/2014.03/shared/adobe/MediaCore/ASL/Foundation/Src/DirectoryRegistry.cpp -283]
This happens both when I open the it from my Applications folder and when I try to open an existing project.
I’m on 3.5ghz Intel Core i7 iMac running on OS X 10.9.4
Anyone else getting this and found a way around it?
Thanks

next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936

Failure to import fcp7 project's xml into Premiere Pro 2014. Details below. Why is it crashing? Any thoughts?

Here are the details of my problem:
Premiere Pro 2014 (up to date)
Mac book Pro OSX Yosemite 10.10.1 with 2.8 GHz Intel Core i7 processor
Source footage includes a variation of codecs as follows: H.264 in a .mov container, 1920 x 1080 Apple Pro Res 422, Linear PCM
There are no error messages, the import into Premiere Pro 2014 begins normally but the "progress bar" never starts and then after about 10 seconds a blank white box appears followed by the pinwheel.
When the problem occurred I was trying to import a fcp7 project's xml file into Premiere Pro.
I emailed Adobe Support Tech the fcp7 xml file and it crashed his computer, however, I was able to successfully import one clip from fcp7 (an Apple ProRes 422, Linear PCM, duration 1 minute) from the fcp 7 project into Premiere Pro, but not the whole project or the bare essentials (the cut itself).
I am not running other software
Do you have any third-party effects or codecs installed? Not that I know of...
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU). ??????
I am using Mercury Playback Engine GPU Acceleration
The problem only happen when I try to import the FCP7 xml project file into Premiere Pro

Hi Lynn,
Have you inspected the XML file for any anomalies? That might be a way to see if any third party effects were used.
Thanks,
Kevin

Premiere Pro 2014 upgrade question

Heya.
So, a while back I upgraded Adobe Premiere Pro to Adobe Premiere Pro 2014. But when I did, instead of just upgraded I was given 2014 as a separate program and I still had the original. It didn't seem to affect anything, so I paid it no mind and just proceeded with 2014. Lately though, all my adobe programs are working for only 15~20 minutes before slowing down to a snails pace and then freezing all together. At first I thought it was my lack of free disc space, so I deleted enough junk to put me at 83GB. But the programs are still sluggish after only a little bit of use. So my question is: What will happen if I delete the original Adobe Premiere Pro (in order to make more space)? Will I still have 2014, or can it not exist on my computer without the original?

Separate installs, separate functionality. Uninstalling older versions will drag down shared components, though, and necessitate a reinstall of the other product. Won't fix anything for you, though, I can tell you that. Your system is most likely simply showing signs of wear like fragmented disks or temp folders filling up just as any update to Windows or a driver could interfere operations. Do some housekeeping and check your settings.
Installation Preparations | Mylenium's Error Code Database
Mylenium

Premiere Pro has encountered an error [URGENT]

I can´t open my recent project.
I receive the following error Message:
"Premiere Pro has encountered an error.
[..\..\Src\Clip\MasterClip.cpp-2802]"
Even if i want to open the auto-saved projects i get this error message.
I tried to import the project into a new project. It opened and i could edit it. But after saving and reopening i get the same error message.
WHAT CAN THIS BE? I have to finish the project tomorrow!
Could file naming be a problem?
What is Src\Clip\MasterClip.cpp? What does it cause?
Please, i need any clue!
kind regards
ps
Windows 7 - Premiere Pro 5.03
The project has different sequences and audiofiles.
I´m working on this project for a week and nothing was wrong.
Last step i have done was rendering a part of a sequence. After this render i couldnt open the project.
Strange was that in the rendered file the second audio track wasn´t rendered.

I've read a lot of people are now seeing this exact same error under varying circumstances. Let's hope they get it resolved soon!
In the mean time, here's a work around I've been using to recover from this...
• After the error and impending crash, open the autosaved copy of the file (in most cases will be more current than your last saved original) and you will notice the error message pops up again - just click continue. All of your media will look like it's missing/needs to be loaded in the preview window, but it's a simple fix and quick too!
• Select-All of your content in the Timeline panel
• Right-click with your mouse and click off the "Enable" option
• Right-click again and re-select the "Enable" option
All your media will be online and connected as well as your rendered caches.
*Note that once your project has crashed, it will give this error EVERY time you save/close/reopen the project, so you'll have to repeat the steps above each time.
Cheers,
Jeff
Jeff Foster
Author/VFX Producer
http://PixelPainter.com

Urgent : Premiere Pro has encountered an error

Bonjour,
Depuis plusieurs jours nous sommes nombreux à être confrontés à un bug Adobe très critique. Lors de la réouverture d'un projet, Premiere plante et affiche les messages d'erreur suivants :
"Premiere Pro has encountered an error.
f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe "
Puis :
"Impossible de charger le projet. Celui-ci est sans doute endommagé ou contient des éléments obsolètes."
Le fichier .prproj est irrémédiablement endommagé et devient irrécupérable, quelle que soit la machine, l'OS (Win 7, 8 ou 8.1) ou la version Adobe utilisée (CS ou CC). Les fichiers auto-save sont également inutilisables. Ce bug apparu assez brutalement fin septembre pourrait être lié à une update Windows affectant le système décimal. Pour autant, des bugs similaires assez anciens semblent déjà documentés dans les forums en anglais, mais aucune réponse claire n'est apportée par Adobe.
De nombreux utilisateurs, dont je fais partie, ont engagé des projets à caractère professionnel et se trouvent bloqués depuis plusieurs jours. Les exports EDL voire XML Final Cut sont trop partiels ou inadaptés à une récupération intégrale.
Un forum en anglais traite du sujet, mais rien n'avance.
Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe
J'observe qu'un site web propose la réparation des fichiers .prproj endommagés pour 250$ Recovery for Adobe Premiere Projects with Error "MediaFoundation/API/Inc/Keyframe" ce qui suggère que le bug est connu. Pourquoi Adobe ne réagit-il pas ? De toutes façons, un projet même reconstitué redevient corrompu dès sa fermeture-réouverture, tant que le bug n'est pas fixé par Adobe.
Si vous avez rencontré cette erreur ou si vous avez une solution, merci de votre aide !
Gilles
Windows 7 Home 64 bits
Adobe Creative Suite CS6

Voir forum anglais
Des solutions proposées pour recup fichiers endommagés
Jean-Claude RICHARD
Mobile : 07 50 52 01 52
[email protected]
Le 8 oct. 2014 à 18:36, gnicolen <[email protected]> a écrit :
Urgent : Premiere Pro has encountered an error
created by gnicolen in Forums en français - View the full discussion
Bonjour Gilles,
Je suis dans le même cas depuis hier, je ne sais pas comment faire. J'ai CS6 (non CC)
Dans mes 5 sauvegardes auto, je peux ouvrir les 4 plus anciennes. hier 11h29, 11h49, 14h30,15h30. la plus récente 18h54, et le projet sont en erreur.
En ouvrant 1 sauvegarde ancienne, l'apparence de l'espace de travail est altéré : pistes video non affichées mais non perdues, fenêtre styles de titres anormale.
Si j'ouvre un projet ancien de quelques mois, l'apparence de l'espace de travail est altérée.
Visiblement, il s'est produit quelque chose dans mon PC hier après 15h30. Je n'ai pas le souvenir d'avoir fait quelque chose de particulier, pas d'update Windows, pas d'erreur système ...
J'ai utilisé LightRoom 5.
C'est énervant.
J'ai lu les posts sur le forum en Anglais ... essayé le' pp repair' sans succès.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6804683#6804683
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Forums en français by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Premiere Pro Debug Event - Premiere Pro has enconuntered an error.[..\..\src\TickTime.cpp-290]

Ho salvato un progetto Premiere Pro CC (2.2014) tre volte successive con i nomi: telecinema1.prproj, telecinema2.prproj e telecinema3.prproj. Tutto ha funzionato regolarmente e per fortuna ho esportato tutti i file e anche alcuni _copiati con Project Manager.
Ad un certo punto però quando ho cercato di riaprire il n.3 mi è uscito il seguente avviso: Premiere Pro Debug Event - Premiere Pro has enconuntered an error.[..\..\src\TickTime.cpp-290] con relativo crash.
Non mi sono preoccupato e ho provato ad aprire il n. 2, ma anche questo e poi anche il n. 1 mi hanno dato lo stesso problema.
Ho riscontrato che si tratta di un errore ricorrente, ma non ho trovato nessuna segnalazione con TickTime.cpp-290.
Cosa faccio? Grazie

How to repair projects that get a "TickTime.cpp-290" error after opening a specific project.

Premiere Pro 2014.2 crashes as soon as I try to do anything. Any ideas?

Hi there,
My employer just leased a new system for me. Up until last week I had PP 2014 installed and everything ran without issues. Since the new system and installing the latest version of Premiere Pro 2014.2 I can no longer work on anything.
The software will stay open if I start it up and don't do anything. I can even open a project and it will still work. The problem occurs when I try to do something i.e. import a file, open a sequence, rename a title, etc.
Can someone help? If so, please let me know if you need more info from me (see system info below). Thanks.
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: HP Z230 Tower Workstation
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (8 CPUs), ~3.6GHz
Memory: 16384MB RAM
Available OS Memory: 16070MB RAM
Card name: Intel(R) HD Graphics 4600
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Display Memory: 1696 MB
Dedicated Memory: 64 MB
Shared Memory: 1632 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)

I just something and it seems to be working so far. I found this on a few sites. Will this affect what I can do with the latest version of Premiere? Should I leave it this way? Thanks in advance.
In the Video Rendering And Playback section, select the appropriate renderer: Mercury Playback Engine GPU Acceleration or Mercury Playback Engine Software Only.

When Exporting "Adobe Premiere Pro sorry, A serious Error has accord that requires....."

Since the new update when Exporting I get this message ""Adobe Premiere Pro sorry, A serious Error has accord that requires....." I've tried to reinstall the software on both computer without any luck. Please Help!

Premiere worked before.
I’m not using any third party effects or codecs.
MAC
Processor 3.4 GHz Intel Core i7
Memory 24 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 680MX 2048 MB
Software OS X 10.9.1 (13B42)
Adobe Premiere Pro CC Version 7.2.1(4)
When I press EXPORT I get this message "Adobe Premiere Pro sorry, A serious Error has accord that requires....."

Premiere Pro 2014 CC - rendering errors

Similar Messages

Maybe you are looking for