Premiere Pro 5.5 Not Showing Entire Recording

When I try to open a recording in Premiere to edit it it only shows the first minute or so of the video, while opening in other programs (MPC, VLC, etc.) renders the entire recording. VLC actually says the AVI is broken and needs to be repaired, and that there may be problems with seeking, but doesn't give any other information. It still works in VLC despite the error message however, and seeks just fine. I haven't had any luck researching this on Google so I thought I would try here and see if anyone else has experience this issue.

Ok here is the info.
Premiere Pro Ver. 5.5.0, no updates.
Windows 7 Professional, 64-bit
6GB of ram, Core i7 920
nVidia GTX 470
Not getting any error messages, I have a Canopus ADVC110 capture device that I'm capturing analog video with. I'm using the capture tool in Premiere with default settings, except that device control is turned off. I get no errors or notices when the capture is running or when I make the files. However when I go to import the clip into my timeline the duration is less than a minute long. When viewing the file in other program's it is fine, even in another editor like Vegas. I have several clips that exhibit the same behavior. Occasionally I have a clip that works fine without the duration issue, but I'm not sure why as none of the settings for the capture have changed.
The clip I'm looking at currently is roughly 15min long and shows up to be about 43sec in Premiere.
Video info
General
Complete name                  :
Format                         : AVI
Format/Info                    : Audio Video Interleave
Format_Commercial_IfAny        : DVCPRO
Format profile                 : OpenDML
File size                      : 3.19 GiB
Duration                       : 15mn 3s
Overall bit rate mode          : Constant
Overall bit rate               : 30.3 Mbps
Video
ID                             : 0
Format                         : DV
Format_Commercial_IfAny        : DVCPRO
Codec ID                       : dvsd
Codec ID/Hint                  : Sony
Duration                       : 15mn 3s
Bit rate mode                  : Constant
Bit rate                       : 24.4 Mbps
Width                          : 720 pixels
Height                         : 480 pixels
Display aspect ratio           : 4:3
Frame rate mode                : Constant
Frame rate                     : 30.027 fps
Original frame rate            : 29.970 fps
Standard                       : NTSC
Color space                    : YUV
Chroma subsampling             : 4:1:1
Bit depth                      : 8 bits
Scan type                      : Interlaced
Compression mode               : Lossy
Bits/(Pixel*Frame)             : 2.353
Stream size                    : 3.03 GiB (95%)
Audio
ID                             : 1
Format                         : PCM
Format settings, Endianness    : Little
Format settings, Sign          : Signed
Codec ID                       : 1
Duration                       : 15mn 3s
Bit rate mode                  : Constant
Bit rate                       : 1 536 Kbps
Channel(s)                     : 2 channels
Sampling rate                  : 48.0 KHz
Bit depth                      : 16 bits
Stream size                    : 166 MiB (5%)
Interleave, duration           : 966 ms (29.00 video frames)
And a screenshot of what I'm seeing in Premiere.

Similar Messages

Premiere Pro CC features not showing up

I purchased a Creative Cloud membership today and was expecting the version of Premiere Pro to be different, particularly to have the feature that syncs audio in multpiple clips, but the software appears to be exactly the same. Are those new features I've seen in the videos not available yet, or am I missing something. How can I tell if I have Premmire Pro CC and not Premiere Pro CS6?
Thanks

How can I tell if I have Premmire Pro CC and not Premiere Pro CS6

Premiere Pro CS5.5 Not Showing Correct Video in Sequence - URGENT

I have been working on a film that I need out by next Wednesday and for some reason Premiere is showing the WRONG videos in the timeline/viewer. I have done numerous edits in After Effects via Adobe Dynamic Link. It replaces other video with random clips I've done edits to in After Effects via Adobe Dynamic Link instead of the correct video file, either edited in After Effects via Dynamic Link or just a plain video clip without editing in After Effects. This is extremly frustrating in that I have to have the film out by next week and this has never happened before! Any response is welcome!!

when I try to open a changed name comp in After Effects, it automatically directs me to another project and I didn't even click open
Do you have multiple AE projects that contain comps with the same name? For example: Project01 contains comp01, and Project02 also contains comp01? If so, you'll have to sort that out as well. Give the projects and the comps in them unique names if they will all be used in the same Premiere Pro project.
Consider using a single AE project that contains all your linked comps -- it will make the Replace With After Effects Composition command in Pr less useful, but it may help simplify and organize things overall.
Once all of your AE projects and comps are re-named, you may have to go through your Pr project and manually re-link all of the AE comps. Maybe I shouldn't have said "everything will sort itself nicely".
Jeff

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC.

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC. They say it could have been a Windows update? Is anyone else having this problem and found a solution any suggestions.. Thank you.

Hello, thank you for your help. I finally was able to contact someone from Adobe on line.. It took about 1 hour on hold but I finally won the lotto...Lol. Pr.. /Project/Project Settings/General/ I had the (Mercury Playback Engine GPU Accelerated (CUDA) and not the (Mercury Playback Engine Software Only) It only took 1 second for Adobe to figure it out...Lol.
Although I have a high rated Nvidia card that did handle the software for some time after a hack, I believe a Windows update may have altered my Premiere Pro CS6 settings.
Video card is Geforce Nvidia GTX 765M non compatible with (Mercury Playback Engine GPU Accelerated (CUDA). Thank Ronin Edits and cvid01

I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are there OK. Any suggestions?

I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are in there OK. Any suggestions?

It won't show up on your Apple TV until it is fully downloaded into iTunes on your computer, have you done this.

Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!

I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
Theo Smith

I sent the screenshot via an e-mail attachment. I wasn't aware that
attachments could not be forwarded this way. I will send it again. First time
I've utilized this service.
In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time,
[email protected] writes:
Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3
aspect ratio
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in Adobe
Media Encoder (AME) - View the full discussion
(https://forums.adobe.com/message/7264779#7264779)

Why won't premiere pro cc will not let me add an adjustment layer

why won't premiere pro cc will not let me add an adjustment layer

Glad that you got the adjustment layer issue worked out. Not quite enough info to troubleshoot the other problems. The following page outlines the kind of info that helps zero in on the cause of such problems: FAQ: What information should I provide when asking a question on this forum?
As to the cache files and rendered previews, you do not need to keep them. Premiere will regenerate them as needed. Because re-conforming the audio and re-rendering the sequence takes time, you probably want to keep those files around for the current project--unless, of course, you have reason to think that the cache or render files are causing problems.
To keep things clean and get the attention of more people, it would probably be best to start a new thread for the other issues.

Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

Thanks Todd for all the info. It is much appreciated and very helpful. On a different note, could you possibly direct me to the correct forum to fix this bug? I am suddenly recieving a warning on my System SSD referencing Adobe Exchange. Here is a screen grab to best explain:

PreludeCC and PRemiere Pro CC will not update error: " log Transport 2"

PreludeCC and PRemiere Pro CC will not update . update gets to 62% and then quits with the following error code "Log Transport 2"
System
OS 10.9
MacPro 3,1
All other apps do update.

HI Steve & Perry,
Have you tried restarting the machine and applying the updates again ? If yes, are you still getting the same error message ? If yes , could you please share a screen shot of the error that you get ?
Cheers,
Kartikay Sharma

CRM_DNO_MONITOR not showing any records

CRM_DNO_MONITOR shows all the records if using the userid used in the configuration of the service desk but does not show any records if using any other user. We even gave SAP_ALL and SAP_NEW but still does not show any records. We've gone through all the threads in SDN related to this issue but no help.
Please provide any suggestions.
Lalit

Hi,
does not show any records if using any other user.
Check the following
1. If the user has a Business Partner (BP) number
2. If yes, whether his User name has been configured in Identification tab for the BP under Employee role
You can try this in CRM_DNO_MONITOR
1. Change the Status to "All"
2. Change the Layout
Regards,
Rajesh Kumar

Execution results panel does not show deleted records

Hi,
For OWB 10.2.0.2, i can succesfully run the mapping. But the Excution Results panel does not show deleted records. Shows 0 eventhough it actually did delete the records.
Does anyone have suggestions?
Thanks,
Raj

Hi,
According to your post, my understanding is that you saw the different results for everything and people search tabs.
It is by design in SharePoint 2013.
There are four search experiences that are available on a default enterprise Search Center results page. Each search experience uses a different result source.
Everything search experience use Local SharePoint Results sources.
People search experience use Local People Results sources.
Local SharePoint Results specify all items from the local SharePoint search index except People items.
Local People Results specify People items from the profile database of the User Profile service application.
More information:
Understanding result sources for search in SharePoint Server 2013
Best Regards,
Linda Li
Linda Li
TechNet Community Support

AP_Checks table not showing any records.

I am using oracle e-business suite 11.5.x. The table ap_checks is not showing any records at all. Please let me know as when i have to look into ap_checks and when into ap_checks_all table. The code that i am looking into is running for very long time and am sure the ap_checks is waht it is pointing to and it is correct.

Hi.
What is the result of?:
SQL>SELECT DISTINCT org_ig FROM ap_checks_all;
Octavio

AU pro 53 is not showing up in logic

Hi !
AU pro 53 is not showing up in logic audio instrument chanel...
Its only plays as a stand alone, outside of logic.
Maybe I have files to drop in a certain folder in order to make pro 53 work as a plugin AU
thanks

Must be UB or the standalone version would not be there either I think.
No, if it's PPC, the standalone will still work because OSX will run it under Rosetta (albeit slowly, but invisibly).
The plugin won't show up, because it needs to be Intel code to work on Logic running on an Intel machine.

Premiere Pro CS4 does not import EX1 files longer than 1 hour

I had to record a long speech and used a Sony XDCAM HD EX1 camera with a 32 Gb and a 16 Gb SXS cards. The speaker paused after 1h 26 min. I stopped the recording and waited until the green light that allows recording the segment came on. Later I recored smaller segments.
I copied all the recorded files to the PC hard disk ( Intel Quad Core 2.4 Ghz with 3.25 GB RAM with XP Proofessional SP3).
I used Sony Clip browser to watch the clips and all of them were perfect. Then I opened premiere Pro CS4 4.21 and I wanted to import this 27 GB file. In the media browser appeared only one mp4 file. All the short ones where imported normally but the big one freezed premiere and the only way to close premiere was with the windows task manager.
I checked again in the Sony XDCAM clip browser version 2.6 and you can see it perfectly. There was a detail, though: in the lower part of the preview window I saw 6 marks. When I checked the file in the disk, I found that the 27 Gb file was separated in 7 parts. Each of them was 3.51 Gb and the last one 2.5 Gb. That means that the file was cut in pieces that were less than 4Gb supposed max file lenght.
I tried many ways to import and no result. The I used the "export " of the sony clip browser. There is one choice that is "MXF for XDCAM HD". When I chose this item another panel appeared and showed a 1440 X 180 59.94i 25Mbps choice. I took it and after some time it created the 27 Gb file that I could import it normally with 4 audio tracks. But there is a drawback a "media concept" logo appeared to remeber to "buy" the program.
Anyhow, the question is: How can I import to Premiere CS4 a MP4 file created by a Sony EX1 HD camera whose lenght is more that 1 hour long ?
Thanks
Wolfgang

I think is the contrary because the clip browser copies all the foleders needed. I got this opinion from another forum that copies into Final Cut:
"My workflow is to create a hard drive folder for the project, then use Clip Browser to import the clips from the card. I review the clips, labelling them, adding logging notes, setting the status and putting in essence marks as needed (the number of characters available for the essence mark description is fairly limited). I then open FCP, create and save a new project then call up XDCAM Transfer. I select the project folder and it will pull in all the clips. I then filter for OK status, occasionally create subclips then import. The clips come over to the bin, with their names and with the essence marks converted to markers. Obviously there are backups taken - I've not mentioned them."

Premiere Pro 5.5 Not Showing Entire Recording

Similar Messages

Maybe you are looking for