Premiere Pro 5.5 workspace not functioning

So I created a new project, imported footage and then tried to drag it into the bottom editing pane, usually at this point the clip I'm working on appears in the top right 'sequence 01' pane but it's not.
See screenshots, [img]http://i.imgur.com/Y2BLX59.jpg[/img]
Have i inadvertently made a change? I even went as far as reinstalling but the problem persists - I can't edit.

Reset Corrupted Preferences = https://forums.adobe.com/thread/1567425 may help

Similar Messages

  • Premiere Pro 1.5 will not load

    Hi,
    After quite a period 'away' from editing thought it about time to get back into it.  However, my Premiere Pro 1.5 will not start on my computer.  It (normally) gets to the loading Wave_Warp AEX, stops, thinks about it for a while and then the computer re-boots itself!  It works fine on my laptop and I even tried it on my wifes desktop with no problems.  I have tried everything that I can think of to stop this happening, including a full system restore with hard drive format thinking a clean HDD would be okay, but no, the same result.  I suspect there is a compatability issue with this computer, which is a Hewlett Packard Media machine running Win XP Media version.  Any help/advice much appreciated - I've already spent a lot of time trying to get this to work and thats before I've started editing!
    PS  I'm very much a 'home user' and so do not want to go to the expense again of upgrading, only to find that would have the same problem - I did have an old 'trial' version of Pro 2.0, but that had the same result, the computer re-boots during loading.
    Many thanks
    mkn

    Thanks again for the replies.  Harm, I would like to do what you suggest but not entirely sure on how to do it.  The only discs I have are the ones I made when I first got the computer (its a Hewlett-Packard) and they are the standard 'restore' discs.  If I 'format' the c drive, ie erase everything and then do a restore with the rescue discs would that give the correct response or do I need to get a proper, full install (of say Windows 7)?
    Jim, ironically I was getting a hunch that it may be a memory module.  It has 2 GB consisting of 4 times 512 banks.  When I first got the computer one of the banks failed and was replaced under warranty but in that instance the entire computer would not start.  Having said that, i'm sure this a communication problem between the software and the computer.  It fails after the last 'loading' instruction (something like Wave_AEX), or, occasionally it gets past that onto the normal workspace but will then fail anytime within the next 15 secs or so.
    Next job will be to systematically remove a memry bank at a time to see if I can isolate it that way.  If that doeas not work then i'll do as Harm suggests.
    Thanks again.

  • Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

    Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

    You haven't given us much to go on here.  What exactly are you doing and what exactly happens when you try?  Which specific version of each program are you using?  (Go to Help>About...)
    On a side note, a simple, brief thread title is all that's needed.  Something like "After Effects Issue" would be fine.  You don't need the full question there.

  • Adobe Premiere Pro CS6 (mac) will not completely launch.

    After a few weeks idol my Adobe Premiere Pro CS6 (mac) will not completely launch. It tells me a serious error has occurred, it shuts down and the circle continues. I've even reloaded  the app and it happens again. I did upgraded to Yosemite but I can't find anyone else having probs with Yosemite. Any ideas. No luck on the adobe site.

    >did upgraded to Yosemite
    CS6 is about 3 years old... even the latest Cloud versions had to have updates to be compatible... since you have "reloaded" (was that a full uninstall and reinstall?) I have no other suggestions

  • My Premiere Pro crashed and will not reload. Can I uninstall and re download with Creative Cloud?

    My Premiere Pro crashed and will not reload. Can I uninstall and re download with Creative Cloud?

    Yes, if you're a Cloud subscriber and are running a 64 bit operating system.

  • Premiere Pro CC 2014 will not play

    I usually like to wait a few months before updating, but I had an issue with a client and needed to get the new version of Premiere Pro CC.
    Premiere Pro CC 2014 will not play in Source or Program. Clicking play button or spacebar causes play icon to change from start to stop, but nothing happens. I'm on a late 2012 iMac. i7 Processor. OSX 10.8.5

    I'm Windows, but some saved Mac links to read that MAY help
    Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0
    Troubleshooting guide for Mac freeze
    http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
    External speakers stop playback http://forums.adobe.com/thread/1370072?tstart=0

  • Premiere Pro CC (2014) does not show preview!?

    Hello there,
    I've a serious problem. Premiere Pro CC 2014 does not respond in the preview monitor.
    It's not like the program doesn't answer but it's only the way of working with footage.
    I can't watch my footage but I can set in- and outpoint. I can't work because I can't see anything.
    What's the matter? How can I fix this?
    Thanks

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • My problem is:I want to download the program test premiere pro cc but do not let me in the crative cloud

    I want to download the program test premiere pro cc but do not let me in the crative cloud

    If it doesn't show up, then your system doesn't meet the requirements. It's as simple as that. Check the Tech Specs on the product page.
    Mylenium

  • I have installed the premiere pro app but its not getting launched

    i have installed the premiere pro app but its not getting launched. I have installed a trial version and it took one full night to get installed. it finally got installed in the morning but now its not getting launched. please help me out with whats wrong.

    You're best bet will be to check the Bubble Witch Saga Support site.
    There are some basic tips on the Apple site too -> iOS: Troubleshooting applications purchased from the App Store

  • Premiere Pro 2.0 will not import --

    Premiere Pro 2.0 will not import mov, wmv, avi, mp4 or avchd files.  What format does it want?  OR does this have something to do with my Win 7 machine not having the right codecs?  If so, which ones are the right ones and how do I install them?

    >not compatible with W7
    Right click the program icon and select XP compatibility from the pop-up option list
    Also right click the program icon and select "Run as Administrator" to see if that helps
    If you have W7 Pro... read ONE example of using Virtual XP http://forums.adobe.com/thread/702693
    -And http://windowssecrets.com/newsletter/using-windows-7s-xp-mode-step-by-step/

  • Have premiere pro cc and do not have the tracking mask feature. Yes I have updated. Thanks

    Have premiere pro cc and do not have the tracking mask feature. Yes I have updated. Thanks

    I thought i had done this. If I am doing something wrong please advise what I need to do.
                                                                                                                                       Thanks for the help.

  • Premiere Pro Project Manager does NOT include After Effects files.

    Warning: Premiere Pro "Project Manager" does NOT include the After Effects 'dynamic linked composition' files associated with the project when "Collect File and Copy to New Location" resulting in the incomplete and loss of all dynamic linked compositions in the new project destination ( folder or disc drive ) .. I know this also includes Photoshop dynamic links and assume includes Audition audio files as well.

    Here's the best way: Personal Responsibility.
    Put all of your project files in one file. Stop asking PPro to do it for you. It's simple. This is a no-brainer. If you create a linked comp, create it in the same file as your PPro project and files. When you send it to Encore, create the Encore project in the same folder. Works all the time, every time. When you're sure that you're finished with the project for the forseeable future, move the entire folder off your workstation into storage. Do I move a copy of each asset (video clip, image, audio, etc.) into this folder before I import it to my AE or PPro project? Yes I do. Is it overly time-consuming? Not really. I can fly on my machine. Does it beat not being able to open a project later. Oh yes. Yes it does. I'd say I did 50 projects last year this way. When I occasionally had to move a project folder back to the workstation, I had no problems. Everything worked as it did before I off-loaded it. That's because I take personal responsibility for my projects. It's imporatnat that theyt work, especially if I end up having to hand it off to a third party down the road.
    BTW, my workstation is RAID 0. If you are using anything less, you need to upgrade. What I'm trying to tell you is that my system works very well. I have not always done things the right way. I have had my share of frustration. The point is that I learned. Now I'm passing that on to you. I use CS5 on an HP Z800 with a measely 12 gigs of ram and a single i7 quad core and the aforementioned RAID 0 configuration and a hacked Nvidia GTS 450. It works quite well. I'm sure I would do even better with another i7, 12 more gigs of ram and a Quadro 4000, but this is what they give me to use.
    Additionally, I'm using CS5 at home on a MUCH older HP xw8200 dual dual Xeons, 12 gigs of ram and software-only MPE. Guess what? It works quite well.

  • Adobe Premiere Pro CS6 crashes with not finding a capable play module on a windows desktop with a AMD Radeon R9 200 series board.

    I installed Premiere Pro CS 6.0 on a brand new system.
    Win 8.1,
    i7 3.4 GHz on an Asus Sabertooth
    16 Gig memory
    AMD Radeon R9 290 Graphics Board with the latest drivers and Bios.
    On starting Premiere I get the (as I noticed quite frequent appearing) error message that Premiere cannot find a capable play module and the suggestion to update my video drivers.
    I tried everything I found in this forum or on the web:
    Installed the latest drivers
    Run the program as an administrator
    Updated the Graphics board Bios
    Updated Premiere CS6
    Started Gpusniffer in CMD-mode to find out what board it found and added that to the cuda_supported_cards.txt in the Premiere directory.
    All to no avail. The app will simply not start.
    The Gpusniffers report states:
    Loadlibrary “n” failed 
    Loadlibrary “n” failed 
    --- OpenGL Info ---
    Vendor: ATI Technologies Inc.
    Renderer: AMD Radeon R9 200 series
    OpenGL Version: 4.4.13084 Compatability Profile Context 14.301.1001.0
    GLSL Version 4.40
    Monitors: 1
    Monitor 0 properties –
    Size: <0, 0, 1920 1080>
    Mex texture size: 16384
    Support non-power of two: 1
    Shaders 444 :1
    Shaders 422: 1
    Shaders 420: 1
    --- GPU Information Info –
    Did not find any devices that support GPU computation.
    As I invested a lot in the CS6 Master Collection I am not considering an update tot the CC version, also because the same problem occurs in that version too.
    I would be much obliged if someone has an answer that truly will work.  This problem costed me the best part of two days’ work and fouled up my workflow considerably.

    ==========
    I tried to go into display settings and disable the Intel card. (this caused low resolution which is unexceptable)
    ==========
    This makes me think it's using that graphics "card" ( probably built into mobo ? ...called 'onboard graphics ? )
    This stuff gets tricky and sometimes the only way to make windows 'recognize' the pci graphics card is to actually take it out and boot, and then put it back in...
    Then you get mssg " windows detected new hardware" and you install the drivers...
    usually bios gives you choice of using onboard graphics or not ( but this too is wanky sometimes...sorry to say ...)
    I recently ( this past year ) had a similar sort of situation but have a desktop, where its easy for me to take off side panel and pull the pci-e graphics card and boot, and get that horrible low res default screen...turn off, install card, reboot etc...
    but anyway, it sounds to me like you're notebook is using that mobile graphics driver stuff and not the radeon. Somehow you've got to make it switch to that graphics card is maybe your solution.
    sorry I dont have notebook but maybe someone else here does and can help more...
    good luck.
    ps..its always a weird fact of life...when things aren't working 'right' something has to get done fast....
    edit:
    I dont know how much you know about windows stuff, but after you disable that intel thing and get your low res screen.. you DID try to update the driver for that card using 'my computer / device manager  '   right ??

  • How to use .MKV and .ISO with Premiere Pro? They are not supported.

    Hi all. My brother in-law sent us two .mkv videos and a DVD .iso he wants me to use in a video I am cutting for him. The only trouble is, I've no idea how to get them into a format PremPro can handle.
    I've searched and the only solutions I have found are infinitely complicated for me. Avisynth is certainly beyond me.
    Anyone know of a way to convert .mkv (info lists 942x720 H.264 4:2:0 YUV MPEG4 AVC) into something useable?
    Same question for an ISO file.
    Thanks much
    By the way, this is not for anything 'important' nor am I getting paid, so I have no budget tp purchase software. I am sure there must be a free solution.
    I tried this trial version software...
    http://www.moyea.com/import-flv/
    But it would NOT install. It just errored in a loop and was unable to find or understand I have CS5 PremPro.

    Can anyone explain how to use VLC to transcode? The settings are endless and NONE look correct. Everything is about coverting and shrinking and that is not what I want.
    I have looked into this so many times and cannot find how to do it. I know it must be simple, but clearly I am blind.
    What I need is to take whatever is inside that stupid MKV wrapper and extract it. Transcode it. I have been trying for A YEAR now and have never been able to find a solution.
    I'm on a PC and unfortunately, there are free solutions for a MAC. But that won't help me.
    EDIT: One option I see is tsMuxer! But which setting for Output? I can choose...
    TS muxing... or M2TS musing... or Blu-ray disk... or AVCHD disk... or DEMUX
    To explain more, I have a Blu-Ray I purchased and want to add the audio from my laserdisc, since the remixed audio on the disc sucks (hard). I'll also add English subtitles. To be clear, this work is for ME for my own personal use.
    Here is a screen grab from tsMuxer. Which to choose? I will place the audio and video in Premiere Pro. Sync the old Laserdisc audio up and then EXPORT to Adobe Encore to burn a new BD.

  • PREMIERE PRO CC 2014 chapters not showing up in ENCORE now after update

    Upgraded from 2014 to latest revision version.
    Straight export from Premiere Pro CC 2014 to Media Encoder CC 2014.
    Queue up to Media Encoder.
    H.264 for Blu-ray.
    When I import to Encore for timeline, no chapters are showing up now.
    Always did before.

    I'm using the following programs on Mac OS X Version 10.9.5:
    Encore version 6.0.0.492
    Premiere CC 2014 version 7.2.2
    Media Encoder CC version 7.2.2.29
    I'm having the same exact issue described above, but the xml in my .xmpses file does not match what you've listed above.  The end of my .xmpses file reads as follows:
    </stMkr:MarkerInfo>
            <stMkr:NMarkers>38</stMkr:NMarkers>
            <stCap:CaptureTimecode>
                <rdf:Seq>
                  <rdf:li rdf:parseType="Resource">
                      <rdf:value rdf:resource="Capture"/>
                      <stCap:index>0</stCap:index>
                      <stCap:capturetime>00:00:00:00</stCap:capturetime>
                      <stCap:time>00:00:00:00</stCap:time>
                  </rdf:li>
                </rdf:Seq>
            </stCap:CaptureTimecode>
            <stCap:NCapture>1</stCap:NCapture>
          </rdf:Description>
      </rdf:RDF>
    </x:xmpmeta>
    </UserData></SessionFile>
    And I can't find the "Duration>0</StreamDuration>" anywhere in my .xmpses file.  Yet, I'm still getting the "Error parsing MPEG metadata file. Deleting or renaming "E:\YourVid\test.m4v.xmpses" will allow you to import, but any markers will be lost." message when trying to import as a timeline in Encore.  Is there a new workaround that you know of?  Thanks for any help you can give!

Maybe you are looking for