Premiere Pro 6.02: Error/Freeze when moving clips

After loosing media connections in a current project (http://forums.adobe.com/message/4678615#4678615) here's my next big problem with Premiere Pro 6.02. As soon as I try to move certain clips in a sequence, I get this error message and Premiere Pro freezes:
These clips play fine, but as soon as I try to move them: bang!
I de-installed and re-installed Premiere Pro, but that did not help.

HFS+ Journaled has absolutely no positive effect on individual volumes. It helps data recovery with raid volumes and the OS drive with Time Machine. HFS+ Journaled however does cause allot of issues due to the Meta Data applied to the file system and adds significant performance degrading to drive requests in general. People who use HFS+ Journaled are simply creating far more failure points that will effect their editing experience and time frames. Honestly I see allot of Meta Data based issues on the Mac side in this forum and I would be willing to bet most would go away if the Drives would be formatted to HFS+ Non Journaled and then create a new master directory to copy the data back into to break the Meta Data ties in the volume table. Whether clients follow that advice is up to them. However people cannot hold Adobe at fault for issues caused by partition tables and OS specific functions when there are clear ways those are avoided. If clients are passing Storage media to others that use PC then they definitely want those media formatted HFS+ Non Journaled because right now Mac Drive has allot of issues with that. This is a clear message, to avoid failure follow recommended configuration policies.
Eric
ADK

Similar Messages

  • Premiere Pro CC 2014 keeps freezing when loading projects from Premiere Pro CC

    Hi everyone,
    I'm reporting this issue in case someone else would have the same problem.
    I just downloaded the 2014 version of Premiere Pro CC, and when I'm loading a project from Premiere Pro CC into CC2014 I have the software freezing and being unable to even play the loaded sequences. It seems that dynamic link is having trouble linking the CC and the CC2014 version of Premiere Pro.
    Until now the only solution I found was to kill the process of the software and start it again, after 8 times I got my sequence loaded alright, then sometimes it is freezing again, killing process, starting software again, and so on. Does anyone has the same problem ?
    I'm running a Windows 7 Ultimate PC with 12Go RAM dedicated only to Premiere Pro.
    Cheers,
    Vincent

    Hi Vincent,
    I feel your pain, you are not alone. Here are my machine specs and my very frustrating situation, if anyone has any idea as to how I should move forward, I would really appreciate the input/advice...
    iMac - 27" Late 2013
    Processor  3.4 GHz Intel Core i5
    Memory  12 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce GTX 780M 4096 MB
    Software  OS X 10.9.4 (13E28)
    I'm having similar issues that began when I installed Premiere Pro CC 2014, and actually got worse with the latest update/release. The majority of my projects worked fine at first, but the update last week ended that quickly. I did what I know I never should do and updated Adobe CC while completing a project on a deadline. I thought some of the fixes would help me complete the project sooner. Needless to say, the deadline has passed, my client is pissed enough to not pay me or hire me again and I'm stuck with an almost-there version that I can't export correctly because of this software. This is my problem, not Adobe's, but I didn't expect such a detrimental update to halt my operation.
    After doing some research, I found that some plugins could be the cause of some specific editing issues, mainly due to incorrect or inaccessible folders - who knows if its Dynamic Link, CC apps or 2014 apps. I concluded that my issue at the time was a plugin permissions issue on the Adobe "Preference" Folder, so I reset the permissions on the folder so that CC and 2014 apps would be able to access its contents without any problems. This was the wrong decision. For some reason, resetting this folders permissions also effected the main HDD, it's Kernel Text files and their respective permission. I could not boot my machine, just got the Apple and spinning wheel until I had to power down. I ended up on the phone with 3 different AppleCare reps who helped me at least be able to turn the machine back on and access my desktop/files, apps, etc. Outside of this, no one could offer anything other than "Uninstall the problematic application, reboot, reinstall, etc..." or "Backup your files and reimage the HDD." When I mentioned the recent CUDA driver update for my graphics card (NVIDIA GeForce GTX 780M 4096 MB now running CUDA Driver Version: 6.0.51), it was like they had never heard of graphics cards being used in their machines.
    Resetting permissions on Adobe Preference Folder...
    This is what I read would get the CC and 2014 apps communicating correctly so that they could utilize my plugins. There is a problem, I believe, in that their are TOO MANY locations where Adobe folders/components live. There are 3 "Preferences" folders that I found, and I don't know which effects what process, but the folder I changed permissions on clearly effects the operation of all of the CC & 2014 apps I had installed, as well as my HDD. Kernel Extensions and the entire system.
    Based on my perceived effects of the Preference folder, I needed to uninstall everything, run the Adobe CC Cleaner Tool, download/install just the 2014 releases and see if that resolved the issue. I'm not downloading CC apps, the 2014 releases should run fine on their own. I've yet to confirm this with Adobe, as what I've read has simply said to install the new release next to the CC apps, rather than on top of, as traditional update releases work. Anyway, one by one, I reinstalled the 14 apps that I use on a regular basis on a "clean" machine with no trace of previous Adobe apps.
    After reinstalling (without any plugins), I was at least able to open Premiere Pro from the Application folder and work for a few minutes before both Program and Source monitors froze and had to force quit the app. If I try to open the Project File by double clicking it in the Finder, SpeedGrade opens up instead of Premiere Pro - never seen that before. I also had to force quit to end that process and reopen in Premiere instead of SpeedGrade.
    So back to Premiere, if I do have success in opening a project in the right application, Premiere freezes - if not immediately, eventually it will just stop responding. The video clips, sequence segments and UI freeze, but the audio will keep playing until I force quit. When I force quit, Premiere Pro doesn't close entirely. The UI closes, but the process still runs. I've even force quit from Finder, force quit again from the Dock, Shut Down the machine, restarted and Premiere Pro will still be open, but "Not Responding", so I force quit again and open the project. Just now, I opened PP, made minor edits to a sequence, sent it to Media Encoder, exported, but the video I tested exported without audio. I force quite PP twice just before that and it is still running now, but again, it is "not responding".
    Ultimately, none of this works, nor have my attempts at resolving these many issues. One thing I know is that there is something VERY WRONG with either the latest release/update to 2014 apps, the Preference folder or the permissions that were changed.
    As I mentioned previously, and what I think is a major oversight by someone at Adobe, is that for some reason the permission changes to ONE Adobe folder also effected my entire system and Macintosh HD. Some Kernel Extension files went missing, which is never good and should not happen when resetting folder permissions, so I believe my issues are far greater than the faulty Adobe CC 2014 applications, and is the cause of many of my problems right now. If I can't get things sorted soon, I'm going to reimage my HDD and start from scratch. As much as I would like to avoid this, I really have no choice if I want to get back to work and not lose clients over inexplicable technology issues.
    If I find a solution, I will repost, but I think Adobe has to make some serious fixes on this release before anything is resolved entirely. I pay them monthly and rely on their software and platform to work without issue, which is foolish - I know, but I've used CC since it was introduced and it has work well enough until now.
    Is there anyone at Adobe that can offer some advice??

  • Premiere Pro CC (latest version) freeze when loading some projects

    This seem to happen kinda random but I started working on a project and I've opened and saved it several times but all of a sudden it freeze Premiere Pro when opening it. Everything seems to open okay but the thumbnails are gone in the project folder and it just hangs until I do a "Force Quit". The project opens fine in SpeedGrade and it will also import in After Effects.
    When opening it in premiere it asks me to locate two preview files which is no longer available (I did a cleanup trough the Adobe software earlier today, so nothing deleted manually).
    Any idea what could cause this? All media used in the project is located in the same folder as the project file.

    Thanks for getting back to me!
    1) I started the project in the latest version (2014.1)
    2) Yes, I've normalized the audio level on several movieclips in Audition
    3) When Premiere freeze the CPU load is minimal. Like 0,5%.
    4) If I create a new project I can import the old project without any problems but then I couldn't find the timeline. The media files ends up in a folder but without the effect controls etc.

  • Premiere Pro CS5 Not Responding (Freezing) When Working With Other Programs

    Hello,
    I have a performance issue with Premiere Pro 5.0.3 version. When I have the program open and bounce to another program or Windows Explorer window lets say to drag in an asset such as a music or video file and then when I make the Premiere window active the program does not respond for a good 15 seconds, then after some processing (you see the mouse icon change and hear the hard drive chugging), I am able to again work. This is happening every time I switch windows to work on something else. Even if I just click away to another window and click right back without doing anything else, it does this non responding action. It even says it in the title bar (Not responding). I am wasting so much time waiting for the program to respond.
    My system :
    Windows 7 Ultimate
    Intel Core i7 CPU 860 @ 2.80 GHz
    8.00 GB of RAM
    Quadra 5800 Nvidia graphics card
    Drobo Pro 24 TB drive (where my project files, music & video files live) connected via iSCUSI
    Sonnet 4 TB raid drive (scratch disc) connect via ESATA
    Dual Monitors
    Please help!
    ~ Doug

    Doug,
    Similar had plagued earlier releases of CS5, but I thought that it had been addressed with the CS5.0.3 update. Maybe I am wrong.
    There were several other threads here, with similar problems. Maybe they contain some tips that will help. The "constant" seemed to be shifting focus from PrPro, and then back to PrPro.
    Good luck,
    Hunt

  • Premiere Pro CC 2014.2 crashes when "locating media"

    The problem;
    Premiere Pro CC 2014.2 crashes when "locating media".  I am working on a project that has not given me any problems for the last 200 hours.   About a week ago I notice that the .proj file size was 276mb and found this odd because my largest project to date was never larger than 80mbs.  I thought that the premiere was running slow because of the project size. As luck would have, when my client made their their final changes 2 days ago, I opened the project and premiere would hang on the locating media window and then would crash. I called Adobe and spent an hour on the phone with them to no avail. 
    Project workflow
    - 700gb of 5d footage
    - 20 sequences under 5 minutes
    - Dynamically linked files with AE
    - Warp Stabilized about a dozen clips of under 5 sec
    - On every sequence color correction adjustment layer with  RGB Curves, Three way color corrector and sharpen filter
    - I kept old versions of the sequences (I was in version 5 before the crash)
    What I have tried;
    - Unsuccessfully tried to open auto-save files for this project.
    - Successfully opened other older non relevant project
    - Removed Mercury playback engine in the project settings
    - Cleaned out media cache database through pp in media Preferences
    - Manually deleted cache files in /Common/Media Cache Files and /Common/Media Cache
    - Tried importing sequences into new .proj file; it would crash as a result.
    What "worked".
    I was able to open it on another computer. save it under another file name. bring it back to my original computer and open it without problem. I lost about 3 days working through this problem, I missed my deadline. and angered the client.  I was able to use a friends IMAC to "fix" the problem, however I can't always count on him being there if it happens again.
    Questions.
    - What the hell happened? Why could I open it on one computer and not on the other?
    - Is there a way to fix a corrupted .proj files on a PC?
    - What should the average file size be, before it becomes unstable? (I'm pretty that my file size was bloated by all the previous versions of the sequences)
    Windows 8.1  64bit
    Premiere 2014.2
    Intel Quadcore i7-4770    3.40GHz
    16gb Ram

    Hi,
    I would suggest the following steps:
    http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
    Run a disk permission repair on your boot drive, and
    Reset Home Folder permissions and ACLs Error | Apple Support Communities
    Thanks,
    Rameez

  • Persistent Premiere Pro CC 2014 error message: "This project contains a sequence that could not be opened..."

    I've been working on a project and everything was working fine. I close the program and reopened it an hour later. Now, I keep getting this error message: "This project contains a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
    I attempted to use one of the Adobe suggested solutions... opening a new project, clicking on the "Help" Tab and deactivating, but the tab doesn't have that option. I'm also a little afraid to uninstall and re-install premiere pro, the other suggestion, because I'm worried about losing my files.
    I would be grateful if anyone could help me.
    Thank you very much.

    Features and Sequence Presets missing | Adobe Premiere Pro CS6
    FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?
    What to do when you get a preview preset codec error in Adobe Premiere Pro CS6 | Val Gameiro, Writer, Director, Filmmake…
    if you try the project repair from Val's blog you will need to unzip the .prproj file to get access to the xml file.

  • Premiere Pro - Insufficient Media Error - Please help!

    Hi, everyone!
    I'm working in Adobe Premiere Pro (CS3), taking 3 thirty second video clips, and putting them together, along with an audio track, to make a 1:30 video background with music.
    I'm trying to apply a short cross dissolve to each of the video clips. When I do, I get an error message that there is insufficient media and some frames will be repeated.
    This is a mystery to me, because each of the thirty second clips is clearly longer than the cross dissolve transition.
    The transitions seem to play fine in Premiere, but do not appear to show up in any render so far (I've tried .avi, .mov, and .wmv)
    Any idea why I might be getting this error, and how I can correct the problem?

    Telling him to go study video editing is not helpful at all.
    That depends.  If he does actually go off and study video and can then perform the task better, then it really was helpful.
    I've used a number of other pro video editing programs and I've never had to do this in order to make a cross dissolve work
    Yes, you have.  Any proper transition needs handles.  This is a universal concept, and applies to all editors, all media, and all software programs.  Some programs, Premiere included, may try and 'cheat' the transition by repeating frames or with some other method, but that is not then a proper transition.
    Heck even older versions of Premiere didn't require this step.
    Yes, they have.  All NLEs always have, and always will.
    telling someone to go read the manual or go learn video editing is not what these forums are for
    I would argue that Premiere Pro, and hence these forums, are for those who have already learned video editing.
    First lean, then do.  This applies to any activity.  Those who try and skip step one and show up here looking for help do often meet with some backlash.

  • Premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?

    I can open a project, import files or other projects, but when I want to play the sequence the program stops working and closes. When I try to save the project or close the program I get a "software not responding" message.
    I hope someone can help me with this as I cannot work on any projects.
    thanks.

    Hi john,
    thanks for taking the time to help me. I have updated the software and rendered the files and now I am able to play them, but still neither the sequence nor the clip play/show on the corresponding screens, I can only hear the audio file. I also continue having problems when saving the project, the software stops working and I get the "non responding" error from microsoft.
    As you suggested, and I have to say I am pretty much a dummy with the codecs and alike, I installed the mediainfo and run one of the files.
    This is the info that appears on the screen
    I am not getting any error messages from Premiere, so I am kind of stock. If you need other info let me know.
    Thanks for your help and patience.
    Arantza
    Date: Mon, 23 Apr 2012 09:12:15 -0600
    From: [email protected]
    To: [email protected]
    Subject: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
        Re: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
        created by John T Smith in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037What is a CODEC... a Primer http://forums.adobe.com/thread/546811What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037.Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing.For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/enFor Mac http://mediainspector.massanti.com/.http://blogs.adobe.com/premiereprotraining/2011/02/red -yellow-and-gree n-render-bars.html.If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs.Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project.H.264 will NOT work inside an AVI http://forums.adobe.com/thread/854115.More information needed for someone to help... click these links and provided the requested information-http://forums.adobe.com/message/4200840-http://forums.adobe.com/thread/416679.For CS5 and later, the easy way to insure that your video and your project matchSee 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4354727#4354727
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4354727#4354727. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • AEGP Plugin Premiere Pro Import: Unknown error

    Upon importing my Premiere Pro project into AE, I get the following error:
    After Effects: AEGP Plugin Premiere Pro Import: Unknown error. (5027 :: 12)
    I'm using PPro 3.1.1 and AE 8.0.2 on Mac OS X 10.5.2. It's a 23.976 project. I've tried copy-pasting the timeline and get the same error. Anyone have any ideas? Thanks,
    Ryan

    And if you are working on two macs, when working from the other mac save that file to your local hard drive, then creative cloud will automatically save that file to creative cloud... when you switch mac you will have the updated file in creative cloud! Open the file and when you have finished, save as to your local hard drive, and creative cloud will then again automatically save it to creative cloud! I think the easiest way to look at the cloud is seeing it as a back up so every file you save to your hard drive will be automatically backed up to creative cloud.

  • Adobe premiere pro 6    exporting Error Message:  winFile.ccp-814]

    adobe premiere pro 6    exporting Error Message:  winFile.ccp-814]

    I'm getting the same error when I try to export a video.
    Below I've tried to follow the above provided list of info required for the forum.
    I'm using the most current version of Premiere Pro from CC.
    I installed all the updates last night before trying to export.
    I'm running an updated version of Win8.
    The source footage is mostly shot from my 550D/T2i(.mov), and then there are small overlays of an mp4 video I ripped from Youtube. I'm trying to export the video as MPEG2, at 1080i settings. Is this enough info?
    [..\..\Src\Win\WinFile.cpp-814] that is the error message I'm getting
    When the problem occurs Ijust hit"Okay", which takes me back to the export screen. I hit "export" again, and then it appears to be exporting, but the progress bar stays on 0%.no it hasn't worked before.
    Other software? As in simultaneously? Just Chrome browser. Or in conjunction with Premiere Pro; then nothing. It's a standard export from PP without any plugins or standalones contributing to the export.
    As stated above, no I have no third party stuff running.
    Hardware
    Processor: AMD II X6 1055T 2.8GHz
    Memory: 16GB
    GPU: ATI 5700 1GB
    No, I'm not using Mercury Playback engine.
    Only with final ouput. My previews are fine.
    Hope that's enough info.
    Cheers

  • Is there a "blur moving object" feature in Premiere Pro 2, like for pixelating a moving face?

    Is there a "blur moving object" feature in Premiere Pro 2, like for pixelating a moving face?
    When I went to post this question, I put "blur" in the tags, and it offered me a list of tags with the word "blur", including "path blur", which sounds like what I'm looking for, but I a did a search in the PDF manual for Premiere Pro 2, and it didn't find that anywhere.
    Thanks,
    digi

    There is no path option in PP2
    If the subject is moving you need to keyframe position over time yourself.
    Premiere - Blur Face - YouTube

  • Follow up on: Topic : iBook G4 800 MHz freezes when moved or bumped lightly

    Last year I posted the following message, which has been fixed. Summary of repair at bottom of post:
    Original message posted Aug 4, 2007:
    "For the past several months my iBook G4 has been freezing when moved or bumped lightly. It has also occasionally done some strange things at startup. It sometimes will show just a grey screen and sit there. Sometimes the screen will do some sort of fade transition across the screen, going bright in a wave accros the screen and then to black and then nothing. Sometimes there will be vertical lines in the middle of the right side of the screen of various colors. And the last significant occurance is the occassional static in the display. These video symptoms always occur at startup. If the computer starts up to the desktop it will only freeze if moved or bumped lightly. The cursor sometimes can still be moved after the computer freezes.
    I have done the following:
    Clean install of OS (Tiger 10.4) with all updates and tested before updating. If have done this before and after wiping the drive clean.
    I have removed the extra RAM, reseated the RAM, removed the Airport Extreme card, reseated the Airport Extreme card. I have chaged out the hard drive. I have also disassembled most of the computer to check for any other loose components. The only discrepency I have found was a crimped microphone wire, that is slightly damaged. The screen was replaced a few months after purchase when it had a close encounter with a hot wheel car of my son's. The computer is currently a little over three and a half years old.
    I work on computers for a living, specialize in Macs, and have been using Macs since 1986. I am stumped. Can someone please shed some light on this issue by providing a different point of view than my own. Sometimes we need an outside perspective to solve some problems.
    Thanks in advance for any help you can provide."
    Solution provided by Apple:
    I took the laptop to the Apple Store and sent it in for the flat rate repair, which was a little over $300. They had to replace the motherboard and some of the cable. The bad motherboard was causing video issues, freezing and startup difficulties. The bad cables were causing the freezing when the unit was moved. The laptop has performed exceptionally well since the repair and is still in use. Hope this helps other people out there.

    As a guess it suggests to me that the leads on U28 need to be reflowed.
    Mad Dog

  • My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx

    My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx.
    since upgrading to OS lion, my mac book pro (2010 August) keeps freezing (non responsive, requires restart) when i turn on my mac and the system is trying to open apple mail. while apple mail is attempting to collect new mail, the macbook pro freezes. this happens every 2nd time i try to start up my computer. this only started happening after i upgraded to OS lion. please let me know what I need to do to fix this. being forced to restart every 2nd time i turn on my macbook pro has been very frustrating. not sure if apple mail is also the cause of my macbook pro for being very slow during start-up (on the occasion the computer doesn't freeze).

    I am having similar 'freezing' problems with many programs (Mail, Safari, iTunes, etc.). I have done a clean install of Lion instead of an upgrade when it came out. Perhaps something went wrong with my install? I'm thinking about wiping and reinstalling.

  • My adobe acrobat XI Pro has been constantly freezing when I open documents.

    My adobe acrobat XI Pro has been constantly freezing when I open documents. I've uninstalled and reinstalled the program, changed some settings based on community threads, nothing is working. I have to close the document, open it back up and wait at least 60 seconds before I can do anything. I use Adobe pdfs for everything this is very bad. I am using MS Office 365, and Adobe CC on Windows 8.1.

    Hi Kate,
    Please refer to this KB doc. for the solution Application, file icons change to Acrobat/Reader icon
    Let me know if the issue persist.
    Regards,
    Aadesh

  • Error message when moving to a different page

    Post Author: EvDev
    CA Forum: .NET
    I have an ASP.NET 2.0 and Crystal Reports 11.5 project that works fine
    when it's being debugged and when it's on our test server, but when we move it
    to our production server the user will receive an error message when moving to a
    different page of the report.  It's an
    "Object reference not set to an instance of an object".  It seems very
    odd for me for something to work on the test server but not on production.   Has
    anyone seen this before?  Thanks

    Hi there,
    This does seem like a very valid process to be sure
    I'm guessing that the fix is shown in "Solution 1" in this doc;
    http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_tech_note09186a0080b04158.shtml
    Cheers!
    Rob

Maybe you are looking for