Premiere Pro 6 AAF export variable rate error. Why?

Hello,
I'm trying to export an AAF out of Premiere Pro 6 and it says variable rate error.
I've been scouring to try and find a reason for this error and so far no luck.
The footage in the timeline is REDEpic footage. The framerate is 23.976.
Many of the clips have timewarps/timeremapping on them.
I did not build the project, so please be aware of my ignorance about this Premiere Pro file.
I'm only trying to get the AAF to conform elsewhere. How do I fix this or what is the problem?
Thank you for your help.

This might be relevant:
Exporting AAF files
(Excerpt):
"The plug-in converts video clip speed changes (slow, fast,
reverse playback) to the Avid Media Composer Motion Effect,
which is the only supported effect."
If you aren't conforming in Avid, here's a time-consuming workaround:
Export all of the timewarp / time remap clips from Premiere to
lossless digital intermediate (DI) files, then use them to replace
the original clips in a duplicate Timeline before exporting your AAF.
Lossless codecs:
Lagarith Lossless Video Codec (pc only)
http://lags.leetcode.net/codec.html
Ut Video Codec Suite (pc or mac)
http://www.videohelp.com/tools/Ut-Video-Codec-Suite
Virtually lossless codec:
Avid Codecs 2.3.7 - DNxHD (pc or mac)
http://avid.force.com/pkb/articles/en_US/download/en423319
note:
Your selected lossless codec will need to be installed on both systems.

Similar Messages

Adobe Premiere Pro CS5 Glitchy Export!

I export from Premiere Pro and the export comes out all glitchy! I have no idea why. Also the export plays back fine in Priemere. This video will explain everything a whole lot better.
http://www.youtube.com/watch?v=NVGChtOT0zY
I have researched this FOREVER with NO LUCK AT ALL!! This has happened once before, but then it stopped. Now all of a sudden it is doing it again. I have exported multiple times with the same result. I have even tried restarting my computer and then exporting, but no luck either. This is very frustrating and any help/support would be GREATLY appreciated.
-Ken

You need to provide DETAILS about what you are doing
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help http://forums.adobe.com/thread/416679
Some is general about your computer and OS, some is specific to video editing
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html

Using Premiere Pro CS3 When exporting as flash file poor picture quality

I'm using Premiere Pro CS3. I shoot green screen in HDV and work in 1440 x 1080. I have been capturing files in Premiere and sending them to Serious Magic Ulta 2. I use this program for keying and adding virtual backgrounds. I save these files as avi. with a resolution of 1440 X 1080. I then bring them back into Premiere Pro for final edit. When I export these video's encoded as mpeg2 theyplay very clear. I am now trying to export as flv. with alpha channel background and the resolution is poor. I working on the transparent background with walk on spokespersons that overlay the HTML page. When In try to play them on my computer the adobe media player is what comes up. I have downloaded flash player but it doesn't select it to play the video. I'm running windows Vista Business platform. What am I doing wrong.

Thanks for the reply.
The capture and editing have already been done in 1440 X 1080. Should I use this resolution rather than trying to bump it up to 1920 X 1080.
Thanks
Bill Bennett
Date: Fri, 2 Sep 2011 07:33:04 -0600
From: [email protected]
To: [email protected]
Subject: Using Premiere Pro CS3 When exporting as flash file poor picture quality
Computer playback generally prefers square pixels. Make sure to set your output resolution to 1920 x 1080 using a Pixel Aspect Ratio (PAR) of 1.0 or Square.
See if that helps.
>

How would you edit 4k in Premiere Pro CC and export in 2.5k and 1080p (all within premiere pro, is it possible?), how would you edit 4k in Premiere Pro CC and export in 2.5k and 1080p (all within premiere pro, is it possible?)

how would you edit 4k in Premiere Pro CC and export in 2.5k and 1080p (all within premiere pro, is it possible?), how would you edit 4k in Premiere Pro CC and export in 2.5k and 1080p (all within premiere pro, is it possible?)

Edit 4K and export what ever you want from AME

Adobe Premiere Pro CS4 Cannot Export to Encoder Cannot find Updates

I am trying to export my movie from Adobe Premiere Pro CS4, I get a window that reads: An Adobe Media Endocer update is available for this version of Premiere Prol To download the latest update, please run the Adobe Updater from the Help menu or visit htt://www.adobe.com/downloads/updates. When I go help menu and select updates, It only comes back with the Adobe Reader 9 update. When I visit http://www.adobe.com/downloades/updates I cannot find the update anywhere, all updates seem to be for CS5.
Everytime I have used this program in the past the Encoder programs opens automatically when I export from Premiere Pro. But not anymore.
When I open Encoder then open Premiere Pro and export my movie, It loads into Encoder but I get these two error readings. Microsoft Visual C++ Runtime Library, Assertion Failed! Program:... File:..\GUI\Editor.cpp, Line: 391, Expression: false, For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts (Press Retry to debug the application - JIT must be enabled
When I select retry, I get another window that reads: PProHeadless.exe has stopped working, A problem caused the program to stop working correctly, Windows will close the program and notify yoou if a solution is available.

What Adobe products do you have installed? Production Premium or ?
What you did puts the file into the ame queue, but does not actually export it.
Can you open ame? Start -> Programs -> [adobe program group] -> Adobe Media Encoder

My Adobe Premiere Pro CS4 wont export properley.

Im running Adobe Premiere Pro CS4 on my Windows Vista & everytime I try to export my video something goes wrong. When I go to export, it opens Adobe Media Encoder & starts encoding it, but most of the time it will jus stop encoding. Even the elapsed time stops ticking. & I know it isnt the program freezeing up because I can still click the icons and even cancel or add new files, and it isnt just running slow because ive left it for 4 hours and it made no progress at all. A few times it has finished but the video gets screwed up. Like once a certain effect didnt show up, & both times the clips got screwed up & jus flashed green & repeated with the audio stillplaying fine. The only thing I can think of is it's the fact that Im running Vista or that the video has 117 items imported. Please help, Im at wit's end.

Alright, my computer is a Windows Vista. My processor is AMD athlon(tm) Dual Core Processor 4450e 2.30 GHz. I have 3 Gigs of memory (RAM), and it's a 32-bit Operating System. I have 2 harddrive Disks, the C drive (85.6 GB free of 112 GB) and a "FACTORY_IMAGE (D:)" with 1.53 GB free of 11.2 GB, but I think the D drive is just for recoverey, it came built in with the computer. My virtual memorey says it's saving on the C drive and has "Total paging file size for all drives: 3241 MB". I close all other programs besides Adobe Premire Pro CS4, and Adobe Media Encoder when encodeing. Ive also tried running just Media ENcoder with same results.
The video files I have uploaded are .MP4 and .FLV. Ive uploaded MP3 files for some of the sound clips and PNG for some still images. Like I said before I have 117 imported files. Also my video is 7 minutes and 44 seconds long.
Now my problem has never accoured in the same place in the video. It seems to be spontanious. For example I tryed to export it the first time and it encontered an "Unknown Error" this was at a minute and a half of encoding the video. Then the second time I tryed to encode it it worked all the way through, but when I went to play the file it played just fine up until a point. then a series of clips began to flicker and play the wrong clips, some times from a scene that happened just previously to the clip before and also flash green. The audio stayed the same though. After the clip finished and another clip began to play it worked fine. Then I tryed to encode it a third time and this time it simply stopped encoding. Like I mentioned earlier the program or my computer never froze it just stopped encoding and the timer stopped. This happened a few more times before it finished encoding it again, but the same problem happened with the skipping, playing the wrong clip and flashing green while the video progressed, but this time it happened at a compltetly different part. For exaple the first time it happened about 2 minutes into the movie and the second time it happened about 5 minutes intot he movie.
When while I was making the video randomly the flickering of wrong clips and green flashing accourded when I would played a scene, now by just restaring premiere the problem would go away and the scene would play just fine. But this only happened in editing maybe 3 times. Unlike when I was encoding where it happens everytime the program finishes.
I hope this was enough info, if Ive missed anything please tell me.

Premiere Pro 4 Help: exporting larger than 720x480

Adobe Premiere Pro 4
Im sorry that this post is in the wrong section, maybe someone could move it. I did not see an Adobe Premiere Section. And at this point in the day my patience and resolve has worn thin. Im sorry.
After hours of struggling with this program, with no knowledge of it prior to today I may add. I am giving up and exporting a video at 720x480 when I would like it to be saved at 1360x768. I was actually quite impressed with myself that I was able to get this far. Adobe has always been some what challenging and not as user friendly as I would like their excellent products to be for myself.
I figured out how to create a new custom sequence with the video dimentions that I wanted. I even found out where the .xpr files save. The issue Im having is editing the .xpr file. I cannot for my life seem to figure out how to do this. I even tried opening it up the place holder and manually changing the variables to what I wanted and still had no luck.
When I go to export the video Im looking at :
Source: 1360w x768h
Output: 720w x 480h
What Im wanting to occur is:
Source: 1360w x 768h
Output: 1360x 768h
Would someone please be so kind as to help me learn how to create a preset?
Show me how to import that preset?
So that I may then export my video to the original paramaters.
Thank you if you are able to help me.
ven

Where?
Where?
Where?
These are all the places I looked and I didn't see it and by the way I simply forgot to Capitalize Premier

Premiere Pro Crashing During Export

Hi,
I am getting the "Premiere Pro encountered a serious error" message in the middle of an export - over and over. I have tried rendering at 1080p and at 720p. My export gets to around the 1:20 mark (in my 4 minute sequence) and crashes. I have looked at the clip that it's on during crash. Nothing seems to be amiss and I'm able to render those frames for preview in PP. I have Denoiser II and Looks applied to this clip. But, I have Denoiser applied to all of my clips and I have Looks applied to many of them. Every clip up to this point in the sequence renders, no problem.
Any suggestions?
Thanks,
Steve

1st, More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
2nd, use a utility like CPUID HWmonitor to monitor your CPU temperature

Adobe Premiere Pro Won't Export To Adobe Media Encoder?

I Work for a news company and we use Adobe for aeverything we need. But when we take a little break from doing videos while we where moving to a new office space, and suddenly we start again and It decided not to export to the Adobe Media Encoder. Usually it was a 5 second process and now it does not work at all. We have adobe premiere pro cs5.5 from the CC (We are currently not planning on upgrading to CS6 anytime soon.) We have no plugins for it and it works for everything else. When I use the Exporter it Exports in in too low of a quality for use. Help? If you need I work at better-community-news.com, Sooolutions (Seprate buisness same owner.) Glad Studios, (also same owner...all the places I work are the same guy), X.L.N.T Marketing and thats about it. Its a team of 3 guys and we would appricate any help! Thanks!
~ Better Community News

Jan 21, 2014 12:51 PM -to- Jan 21, 2014 2:24 PM
thanks nobody because nobody helped me solve this delima
You do know that this is a user to user forum, not an official Adobe support site?
Which means that there is NOT a full time group of people just waiting to answer questions
Don't you think that complaining about nobody answering in less than 2 hours is a little unreasonable?

Adobe Premiere Pro CC 2014.2 Trial Version - Error when importing mts and mp4 video files

First time using Adobe Premiere Pro (and I'm using the trial version). When I try to import an mts video file (and tried to import an mp4 file as well), I get the error: Adobe Premiere Pro CC 2014.2 has stopped working. And then the program crashes. Please help.
My computer specs: Windows 7 with Service Pack 1,Processor: Intel(R) Core(TM) i5-4570 CPU @ 3.2GHz, RAM: 4.00 GB, System type: 64-bit

Hi Catherine,
Welcome to the Adobe forums.
Please try the steps mentioned below and check if it works for you.
1. Launch Premiere Pro and create a Project, go to File menu>Project Settings>Renderer and change the Renderer to Software only mode, delete previews if you get a prompt and then try to import the clip.
2. If step 1 fails or the Renderer is already on Software only mode, go to Start Menu and search for Device Manager, go into Display Adapters and Right click on the Graphics card to select Update driver software option, on the next screen choose "Browse my computer for driver software", then choose "Let me Pick from a list..." option and from the list select "Standard VGA Graphics adapters. You might need to change the screen resolution of your screen and once done restart the machine again.
Launch Premiere Pro and import the clip to check.
Regards,
Vinay

Premiere pro will only exports 2 files Audio and Video

Hi i'm jared i have a serious problem premiere pro is exporting 2 file an audio and a video file I've tried to use multiplexing and it wouldn't work please help.

Yes that is correct: video files (mp4). They are not separate.
Just export and see what you got.
Start with a small segment of your timeline.

Adobe Premiere Pro CS3 is exporting in the wrong size

I want to export my clip I've made in Adobe Premiere Pro CS3 while choosing the option "HDV 720p24" (I've also tried 25, 30 and a few others).
It says in Video Settings before I even start to work on my clip:
"Frame Size: 1280h 720v"
Which is EXACTLY what I want.
However, whenever I choose to export my clip, it ends up being 720 x 480. That's not even 16:9/Widescreen.
I've tried entering the settings when choosing the export options, but the preset 720 x 480 can't be change.
Why is this? Is it impossible to expert a clip to be in 1280 x 720 or any other custom pixelsize I want?
Best regards, Izzy.

Hi everyone,
I apologize for digging up an old thread, but I figured that I'm experiencing this exact problem and have no idea how to work around it I might as well post in an already started topic.
I'm trying to export 1280 x 720 video to that same resolution, but Premiere Pro will not let me choose anything other than 720 x 480 for the size when I try to export through File > Export > Media. I have attempted to use multiple media formats but have had no results for what I need. If it really help, I've posted a couple of screenshots showing my current project settings, but this is just one of a few different formatting attempts which have all turned out the same:
http://www.derektoigo.com/assets/screenshots/premiereexport1.png
http://www.derektoigo.com/assets/screenshots/premiereexport2.png
Hopefully those will be enough to give you a detailed view of exactly what the problem is.
Any help with how to work around this would be greatly appreciated. Thanks to all.

AVCHD in Premiere Pro CS 5 - exporting file type questions

Firstly, this is my first post on here, so apologies if I'm breaking any kind of etiquette. Also, I'm not a very technical person and would appreciate any comments or advice to be in layman's terms!
So, I film and edit weddings as part of a small company. I've recently had my camera and editing system upgraded to a Sony NXcam and Premiere Pro CS5 and I'm having a little trouble getting used to the new file types and settings (previously used miniDV tapes in SD with a Canon XL2 in an older version of Premiere).
My pc handles the AVCHD footage fine but the way that I edit means that I'll want to export a sequence of edited clips as one long clip, and then re-import it. For example, I'm editing the wedding ceremony from footage from two cameras - I'm going to edit the full version of the ceremony and then I'm also going to edit it down into a version that is a highlights montage in slo-motion to music. The way I do this is once I'm happy with the full version of the ceremony I'll export it and then re-import it so it's one long clip I can play with rather than two sets of footage chopped up on a sequence. So I can alter the speed of this new long clip, and then chop it up and stick in some dissolves to put together the montage. Then I use this montage in the middle of my final film, between the preparations and the reception. The full, edited version of the ceremony is used as an extra on the DVD.
Previously this was fairly straight forward. I was always working with footage in 16:9 and could export it as an avi file, then re-import that avi file with no problems - presto; the exact same-looking footage as I was previously working with.
Now I'm editing with avchd mts footage (1920x1080 - 25p - square pixels?). Naturally, if I export it as a 16:9 avi and re-import it, the aspect ratio and frame size is all wrong for the project sequence.
I just want to know what the best file format and settings are to use to export footage that will match up. There is no option that I can see to export edited footage as mts files. There is a long list of file types, most of which I don't recognise or know anything about and have never needed to use in the past.
Sorry if this is a silly question, I've tried searching for "working with AVCHD in premiere pro cs5" in google and not been able to find anything that can help me on there, so I thought I'd try a forum like this.
Cheers
Adam

I think we may have a slight miscommunication. This is the way that I interpreted your original post.
Lets say you shot the Smith/Jones wedding this past weekend. You start a new project and have a Service Sequence and a Reception Sequence. You finish editing both the service and reception and just a standard full length video. Now you want to create a montage with clips from both the service and reception. In this montage you will have different effects like Black and white, Slo Mo, blurs, etc. So what you do is export the service and reception and then import those two files (or one long one) and then cut that apart and add your music and effects to make your montage. Is that correct?
The way that I do it works the exact same way except that you skip the export part.
When I edit a wedding I generally have 4 sequences when I am finished. I have a Pre Wedding montage, service, reception, and ending highlights. The Pre Wedding montage is just made up of shots from before the service (bride and bridesmaids getting ready, shots of the venu, groom and groomsmen and so on). Then I have a full edit of the service and a full edit of the reception. After I am finished with those 3 sequences I start working on the ending highlight collage. I make a new sequence for the collage then I go to my bin and drag the "Service Sequence" up into the preview monitor (I know in my previous post I said double click. That does not work, because that just opens it up as a sequence. Sorry about that). In the preview monitor I scrub through the footage until I find a section that I want in the montage. Then I set in and out points around that clip and drop it into my Montage timline, and what ever effects to it that I want, then move on to the next clip and do the same thing. To me it seems that we have the same process except that you have to wait for the export (which is always going to give you a quality loss, how much of a loss depends on format and settings).
Please let me know if I have misread your process.
Phil

CAN'T DOWNLOAD PREMIERE PRO: it says there was an error loading the app. anyone?

I was downloading the AE update. I had AE open. it told me to close AE. I did. It then said, "finishing downloading". The new AE version never did download. Instead when I go to my adobe apps it says 'error loading", then offers me the chance to "retry" but when I click that, nothing happens. The reason I needed the latest update of AE is b/c I couldn't do any roundtripping between Pr Pro and After Effects, so I decided to uninstall Premiere Pro and reinstall it to see if it would solve the problem.
Now I can't access pr pro and the AE update!! Argh.
Help!

I use Adobe ProTools for off line installers.
You can get everything there. Programs, updates. It takes a bit of learning with how to utilize the resources properly, but all the instructions are there and if you are able to follow it works well.
One reason I use that rather then the Creative Cloud update app is because my machine is offline.
Second reason i use I use it is because of update errors such as you have found. I spent more time with trying to get CC to update then it was worth and found with Adobe ProTools things worked for me so much better.
If you get frustrated with that update error and failure, there is another method, just takes a little learning to make it work.

Closed captioning with Premiere Pro CS5.5, exported to wmv/mp4

My employer suddenly has a push to be ADA compliant, so all videos going forward need to have captioning, and would prefer to have it closed captioned. I've read that you can add captions with Encore and output them to disc, but since all of the videos are posted online, nothing is burned to disc so that doesn't help. I also know you can use scc or mcc files to add closed captions to a broadcast stream, but since these aren't for broadcast, that doesn't help either.
All of this means is that I need to add closed captioning to online video only. What I'd like to know is this: Is there any way to add closed captioning to video that will be streamed online? Or, am I doomed to putting everything into lower thirds?
I'm using Premiere Pro CS5.5 (I also have AE CS5.5).
Thanks

As a broadcast engineer, I would suspect, and it would make sense that online video files would also be encoded with EIA-608 and EIA-708 set forth by the Electronic Industries Alliance and monitored by the FCC ( Broadcast Standard ). This makes sense to me as all existing video programs which already comply with the EIA-608 and 708 standards would then, automatically play closed captioning when encoded to a video file for playback.
The FCC has recently required all online video to include Closed Captioning as per the Accessibility Act of 2010 ( FCC: MB Docket No. 11-154) Subpart 6 of this document appears to define that all devices which may playback video through the internet, must be able to support the CEA-708, or closed captioning for digital broadcast television. CEA-708 is a form of embedded data often referred to as metadata which is contained within the MPEG-2 stream.
Not to get too technical about MPEG streams, but in essence, even though your end up with a single file, there are traditionally 3 elementary streams of data contained within. Each one has a PID, or Program Identifier number which identifies the Video Stream, Audio 1 stream and Audio 2 Stream. Additional elementary streams can be added such as a data stream containing Closed Captioning- or whatever like Dolby Digital. The PID allows a Demultiplexer to split the streams appropriately for playback.
I would hope there is a program out there that would embed the scc or mcc file ( however they are produced ) possibly after you export the sequence to a file. One of my favoite and best kept secret long-term video websites out there is videohelp DOT com. there is a plethera of kewl software to do all weird things to video, maybe even add CC!
All this still doesn't help us with Premiere Pro though...

Premiere Pro 6 AAF export variable rate error. Why?

Similar Messages

Maybe you are looking for