Premiere Pro 7.1 serious Multicam Editing problems

Hello, I am posting here because the bug report I filed one week ago to Adobe didn't give a result -no response at all from the bug department.
I have two serious Multicam Editing Problems.
PC Configuration: Core i7950, Asus P6TD Deluxe, 12GB DDR3 1600MHZ, Quadro K4000, SSD for the system, Seagate Constellation 7200rpm for video editing.
1. When multicam mode is on at the program monitor, I press play and the program doesn't respond at all. The timeline plays till the end and the program just doesn't let you do anything but wait until playback of the whole timeline is over. Then the program works again (no "not responding" message in Windows).
2. Sometimes the waveform doesn't even appear at the multicam audio clip. I read in other forums that this problem is found specifically at Premiere Pro version 7.1 (October release).
I would be grateful with your help.
Thank you,
Stavros Symeonidis

The media is always a combination of HD .MOV (dSLR footage and .MTS (from my Sony Vg-30). However, I also tested it with .mpeg files created by "match sequence settings". GPU acceleration is always on, as I use nVidia Quadro K4000 with the latest drivers (331.82).
I always create the multicam sequences manually and the problem occurs with any amount of camera angles.
The problem was not solved by reinstaling Windows (7 and 8). In general, I have no other issue with my PC system, except from this specific one.
It doesn't appear always, however it will definitely happen if you press twice or three times the letter L, to fast forward the preview of your Multicam Sequence.
I remind you that this only happens when multicam monitor is toggled at the program monitor.
Did all these help at all to even reproduce this situation?
Thank you,
Stavros Symeonidis

Similar Messages

When Exporting "Adobe Premiere Pro sorry, A serious Error has accord that requires....."

Since the new update when Exporting I get this message ""Adobe Premiere Pro sorry, A serious Error has accord that requires....." I've tried to reinstall the software on both computer without any luck. Please Help!

Premiere worked before.
I’m not using any third party effects or codecs.
MAC
Processor 3.4 GHz Intel Core i7
Memory 24 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 680MX 2048 MB
Software OS X 10.9.1 (13B42)
Adobe Premiere Pro CC Version 7.2.1(4)
When I press EXPORT I get this message "Adobe Premiere Pro sorry, A serious Error has accord that requires....."

Multicamera edit problem in Premiere Pro CC

I have a multicamera edit project, the source and target timelines are set up as required. I've performed the multicamera edit and saved the file. When I open the saved file, only one track in the source file shows up in the target sequence. All tracks in the source sequence are visible, the file was saved exactly as it was when the multicamera edit was performed. It looks like a bug to me.
Steve Keller
Differential Films

I just updated to the latest CC, and it looks like the problem has been fixed!
Thanks.

Multicam Editing Problem during Export Pr CC

Hey guys, first post.
i have been working on a pretty long multicam project (About 1h45m) in Premiere Pro CC
I was all done, and during export in Media Encoder i noticed that after about 45m of rendering, the preview window was still showing the beginning of the video. Upon further inspection, i noticed that the video appeared to be Looping. Sencing that something was wrong, i cancelled my render and reopened my project.
when the project reopened i could see that after a couple of edits, there were little white triangles and the top of the clips. I need to stress that before i started rendering, these triangles where not there.
And yes, when i played through my sequence, at every edit (camera change) the multicam clip would play from the beginning again. i have tried to remove everything after where this problem occurs and then drag the footage out. It does allow me to do edits again and it works fine, but i dont really want to spend hours doing it again, not understanding what the problem is and run the risk of it messing up again.
I am so very confused as to what is going on so any help at all would be awesome. Its very frustrating to work on something for so long and it fail during export.
I will attach an image showing a glimpse of what my problem is. (Please excuse the camera work)
Thanks again
Dan
Specs.
2012 iMac
Processor 3.1 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 512 MB
Software OS X 10.9.1 (13B42)

The triangles indicate hard media boundaries -- there are no more frames available from the source clip beyond that frame. If you don't have a triangle on a clip at an edit point, then the source media has frames available beyond the in or out point of that clip instance on the timeline.
There are a few things that might cause what you're seeing, so I recommend you check your multicam source sequence to make sure that it's referencing the correct media, and that all the media in your project points to the correct files on disk. Double- and triple-check that all the clip instances in the timeline point to the correct sequence or media. If the problem is related to clips on the timeline not pointing to the right thing, you could save yourself some work by trying to fix that instead of re-creating your edits. You should also see if you have any Auto-Saved projects that don't have the triangles at the edit points and that play the edited sequence correctly -- you could save yourself even more work.
Cheers,
Jeff

I'm using premiere pro CC 2014 for 4k editing. whenever I play the sequence cut off only window (premiere pro cc 2014).

I'm using premiere pro CC 2014 (trial version) for 4k editing.
but I saw the play sequence problem.
whenever I play the sequence cut off only window (premiere pro cc 2014).
but mac was fine.
I can't using realtime play.
my sequence setting information
sequence > sequence settings
editing mode : custom
timebase : 59.94 frames/second
video
frame size 3840*2160
pixel aspect ration : square pixels(1.0)
fields : no fields (progressive scan)
display format : 60fps
audio
sample rate : 48000 Hz
display format : audio sample
video previews
preview file format : quick time
codec : Gopro Cineform
Maxium bit depth : uncheck
Maxium render quality : uncheck
composite in linear color : check
check it please my workstation spec.
1. HP Workstation (Z840)
    * CPU : Intel Xeon E5-2690v3 2.6Ghz
    * RAM : 128GB
    * Graphic Card : Quadro K5200

Now I see is fully integrate with the OS preference. If you change the scale in windows resolution Preference, Premiere Pro scale too.
Thanks.

Premiere Pro CS6 reconforms video mid edit

Hi All,
Having a problem with my Premiere Pro reconforming video in the middle of my edit. It is incredibly inconvenient as it takes hours to reconform and I am unable to edit or render video while waiting.
Also, my player shuttle will stop functioning between preview and program windows and will not work again until I force quit and reopen... Which means I must reconform video once again.
This is happening 3 or 4 times per eddit adding hours of time to each project.
Any help would be greatly appreciated!
Thank you!

Hello Kevin,
Thanks for the reply!
I was editing from and external (though not shared) hard drive but having run into this issue I started importing and editing files straight from my desktop. This has not solved the problem and Premiere Pro continues to reconform my video randomly.
I have Premiere installed on my old MAC laptop and my new iMAC. Strangely, the issue only seems to take place on the new iMAC.
I purchased CS6 as a download through the Adobe website. Is it possible that it downloaded or installed incorrectly?
Thanks for your help!

Premiere Pro CS6 importing/ audio and video problems

I recently recorded gameplay from my xbox, when i open this recording using windows media player it states that the video is 3 hours 30 minutes long, which is correct, when i then import this into premiere pro, premiere pro changes it to be 5 hours and 44 minutes long, when i then play this back it plays in slow motion and audio and video start to desync, i thought it may just be the source editor playing up so i made a clip and put it into the timeline and it still had the same outcome. The speed/duration are still on 100% so im not sure what to do, anyone have any idea as to what this is, or why it is happening?

What are the attributes of your PVR video...
specifically, is it variable frame rate?
Media file evaluation utilities:
GSpot
http://www.headbands.com/gspot/
MediaInfo
http://mediainfo.sourceforge.net/en
If it is VFR, Premiere no-likey.
Variable frame rate video problems:
http://forums.adobe.com/message/4897424#4897424
http://forums.adobe.com/message/4071506#4071506

Adobe Premiere Pro CC 2014.1 (graphic adapter problem)

"Adobe Premiere Pro CC 2014.1" but I downloaded the trial version; When I run the program, "Adobe Pro could not find any capable video play modules. Plasa video display drivers update ans start again" as a window opens.
Then the program shuts down.
I need your help in solving the problem.
Goodbye ..
"Adobe Premier Pro CC 2014.1" deneme sürümünü indirdim ama; Programı çalıştırdığımda, "Adobe Pro could not find any capable video play modules. Plase update video display drivers ans start again" şeklinde bir pencere açılıyor.
Daha sonra program kapanıyor.
Problemin çözümü konusunda yardımınıza ihtiyacım var.
Hoşçakalın..

Dual video problems - Do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Premiere Pro CS5.5 Mac - Major Metadata Problems

Hi...
I am having major problems with the Metadata system in Premiere Pro CS5.5
I have created a custom scheme and added the following property "Key" and set it to have a boolean value (Check Mark)
My Metadata display correctly displays the "Key" property and I can check it. Just like expected.
I will now apply it to the clip(s) in need of that meta property.
In the project column the property is also show correctly...
All good so far but now comes the two major problems
PROBLEM 1
1) I have about 300 clips in the project panel
2) If I click the column header I can sort accordingly
3) Clicking name or Labels will immediately sort correctly. 1 Second tops.
4) If I click the column header of my custom propert "Key" I get the SWOD and it takes about 120 seconds for Premiere to sort adhering to the Key Column.
2 minutes for that is a VERY long time compared to sorting by name...
Could this be a bug or am I doing something wrong...
PROBLEM 2
In the project panel's search field I will enter "Key" but nothing will appear... At least that is what I thought.
It took more than ONE HOUR for Premiere's search results to be able to identify that a clip had gotten that property checked. (Clicking the Clip immediately reflects that it has been checked)
I even timed it. Ckecked the Key property for 4 new clips which did not have the meta applied to them.
In the search field I entered 'Key" but only the clip which had had the Key meta tagged since 1 hour would appear.
I waited another hour and now those very 4 clips also appear in the search field. The same goes for the "Good" meta boolean which is NOT a custom field.
I saved the project in between quit Premiere and re-launched but THAT did NOT help PPRO find that Property in the search field.
As I said, it takes about 1 hour for Premiere to be able to included those metadata in the search results.
Funny thing is, if I enter 'true' which is the boolean text-string for a checked property the results appear immediately. But there is NOT much use in having ALL boolean fields appear that are checked.
I welcome that adobe implemented metadata across their apps but ELEGANT is something entirely different.
Could anyone shed some light on this ?
Thanks

Hi...
I am having major problems with the Metadata system in Premiere Pro CS5.5
I have created a custom scheme and added the following property "Key" and set it to have a boolean value (Check Mark)
My Metadata display correctly displays the "Key" property and I can check it. Just like expected.
I will now apply it to the clip(s) in need of that meta property.
In the project column the property is also show correctly...
All good so far but now comes the two major problems
PROBLEM 1
1) I have about 300 clips in the project panel
2) If I click the column header I can sort accordingly
3) Clicking name or Labels will immediately sort correctly. 1 Second tops.
4) If I click the column header of my custom propert "Key" I get the SWOD and it takes about 120 seconds for Premiere to sort adhering to the Key Column.
2 minutes for that is a VERY long time compared to sorting by name...
Could this be a bug or am I doing something wrong...
PROBLEM 2
In the project panel's search field I will enter "Key" but nothing will appear... At least that is what I thought.
It took more than ONE HOUR for Premiere's search results to be able to identify that a clip had gotten that property checked. (Clicking the Clip immediately reflects that it has been checked)
I even timed it. Ckecked the Key property for 4 new clips which did not have the meta applied to them.
In the search field I entered 'Key" but only the clip which had had the Key meta tagged since 1 hour would appear.
I waited another hour and now those very 4 clips also appear in the search field. The same goes for the "Good" meta boolean which is NOT a custom field.
I saved the project in between quit Premiere and re-launched but THAT did NOT help PPRO find that Property in the search field.
As I said, it takes about 1 hour for Premiere to be able to included those metadata in the search results.
Funny thing is, if I enter 'true' which is the boolean text-string for a checked property the results appear immediately. But there is NOT much use in having ALL boolean fields appear that are checked.
I welcome that adobe implemented metadata across their apps but ELEGANT is something entirely different.
Could anyone shed some light on this ?
Thanks

Multicam editing problems with RT

I am having an issue in Final Cut Pro with editing with the multi-cam editor. We are us-ing a G5 Quad with 4.5 GB of Ram. We selected 4 clips from the Browser, control clicked and chose "make multiclip". Then dragged the Multiclip in to the viewer window, or double clicked it to get it there. Dropped the multiclip to the timeline. Played the Clip, and chose our views in real-time. The video on the Canvas cuts out when we made a new selection. There were cuts made, but they did not show up in the browser. Then we had to play the clip back to get the cuts to show up. I know this is not how it is supposed to work. With the Lesson files in the Final Cut Pro book, you are able to cut and see the edits in real time. I have also seen this done on a less powerful machine than what we are using. Also I have the RT set to Unlimited, and Dynamic. Any Suggestions?

What do you mean with "There were cuts made, but they did not show up in the browser"? The cuts are not supposed to show up in the browser. Did you mean the timeline (your sequence)?
Have a look at this excellent article at Ken Stone's Final Cut Pro Web Site
The Essentials of Multicam Editing in Final Cut Pro, by Steve Martin

Adobe Premiere Pro CS6 crashing when making edits

I everyone. I migrated to Adobe Premiere Pro CS6 (I need to finish a couple of project before I can update the computer to CC and Mac OS 10.8.) and it's been crashing right from the begining. It's a random crash but my impression that it becomes more probable as the projects grow.
It happens whenever I'm editing and I press the shortcut for "overwrite" or "insert". (It also happens when I press the icon or move the clip to the timeline)
The screen message I get is this one:
The log message that I get afterwards goes as follows:
On previous days, I've been able to keep working just by deleting the Media database preview files from Premiere but it's not working anymore.
I'm working with XMF files shot with a Canon C300 synced using premiere to sound files (.wav). It only happens when I try to edit but it doesn't matter if I try to edit sound, sound and image or just image.
What it doesn't make sense is that it says something about "dynamic lynk" and, as far as I know, I'm not using dynamic link at all.
Thanks in advance for your time and wisdom
Jaime From Spain

Now, a few updates after a very long night (just in case it might help somebody)
Up until last night, I was saving my Premiere Projects in a Dropbox Folder inside my computer. It was a quick safe way of having a backup copy. Well, it seems that the crash is somehow related. Don't ask me why but once I moved the project file to a regular hard drive (actually a RAID0 where I keep my heavier files) the crashes have stopped.
This morning I went back to the dropbox idea with a new project and -Voilá!- after three hours of work, it crashed again. I moved the file to the RAID disk and no more crashes. My guess is that it is somehow related to the auto-save files that premiere keeps saving. Once it reaches a certain amount (around 20 in my experience) dropbox and Premiere start to do something weird and they crash the software... (It might be related to the software dropbox uses to keep your folders updated and keep backup versions of everything)
I'll run a few tests next week trying to keep the Auto-save files out of dropbox and just the regular files there to see what happens.
Best regards
Jaime

Premiere Pro CS4 and Adobe Media Encoder Problems

I am using Adobe Premiere Pro CS4 on a Mac running 10.6, and I consistently encounter this problem when trying to export a Premiere project using Adobe Media Encoder.
What does this mean? And has anyone else encountered this problem as well? I really need a fix if there is one, because I really need to be using Premiere. I have reinstalled several times, but to no avail. Help me please!

Jim, thanks for testing.
My concerns are about a)distribution and general b)compatibility.
a) When videos are distributed most of the users will probably try to open the files with Windows Media Player. So it is not a good start to have fresh exported h.264 videos which won't run fine with the 'main' player on windows
b) I am wondering if the Problems with Windows Media Player may also be a sign of a general compatibility issue of the h.264 video itself
At least in case b) Adobe would have to look into this.
Here is another test video:
http://www.tsxn.com/storage/transfer/Serenity.zip
Thank you
Chris

Premiere Pro CS4 After Effects CS4 Redraw problem

Greetings. I can't quite figure out how to research this problem. I have included some pics to the
screen grabs to illustrate my point.
The problem is, I have a redraw problem with all Adobe programs that have a timeline in them. Flash, After Effects, Premiere Pro;
I am using a 8800GTS card with the latest drivers from nVidia's website.
As you can see I have multiple mouse images that remain on the screen when I scrube the time line ( in all adobe programs). There is also another really weird problem; when I open a quicktime movie with PPro CS4 open the audio runs at half speed or slower. When I close PPro the audio reverts back to normal speed?
I am using: Borris CC6 Boris 9.2 Boris Red 4.3, Genarts Sapphir Effects, Pixelan Spicmaster 2.5, and Hollywood FX 5 plugins.
Any light on the subject would help or if you could point me in the right direction I'll do the research.
Thanks for the help.
Jan

assuming the problem is only in adobe apps and not anything else right?
Hmm...
Well, you can try some of these things
trash the prefs and clean media cache, though I doubt it will help you in this case
try with a new project and see if the problem persists
uninstall ALL plugins and see if that corrects the issue (clearly HFX5 was never meant for CS4 at a minimum and I'm not a fan of old boris stuff - very buggy)
uninstall and reinstall the Adobe apps and see if that fixes the issue. If it does add back in CS4 compatible plugins only one at a time and see if the problem returns.
also what os are you using and how much memory do you have? could you be running out of memory on a 32bit os?
Dennis

[Premiere Pro] Installation error - MS Visual C++ problem

Hello,
I've just tried to install Premiere Pro but At the end of the installation I get the message that Premiere Pro and Media Encoder cannot fully install.
For both is the detail message the same :
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\BEHEER~1\AppData\Local\Temp\{C32858D4-7839-40FF-B9D4-A89B95647490}\AdobeMediaEn coder_8_LS20\Adobe Media Encoder CC 2014\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\BEHEER~1\AppData\Local\Temp\{C32858D4-7839-40FF-B9D4-A89B95647490}\AdobeMediaEn coder_8_LS20\Adobe Media Encoder CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com
What does that mean please?
And what's the solution?
Thank you very much,
Annelies.

Hi Annelies,
Please try downloading MS Visual C++ 2012 Redistributable Package x86 from : http://www.microsoft.com/en-in/download/details.aspx?id=30679
After that try installing and check.
In addition, you can refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
Regards,
Rave

What project setting should be used in the current Premiere Pro CC to import and edit xdcam XAVC UHD content?

I cannot find a setting that is available when importing XDCAM XAVC UHD (3840x2160) 422 progressive content, shot using sLOG3, nor any other form of XDCAM 4K/UHD. There is no option for XAVC that I can find, nor is there anything under XDCAM HD for 4K/UHD like there is for REDCAM. Is there a Plugin that I need? Or does Premiere Pro CC not yet truly support Sony XDCAM XAVC yet?
The Adobe posted compatibility list for PPro CC says that it will support almost all forms of XDCAM, including RAW 4k, but the reality of what is actually now available in PPro CC appears to be another thing. I hope I just missed something? But as always, Adobe leaves you guessing at these things.
BTW, I tried the REDCAM UHD 29.97 3840x2160 setting, and after the file is imported, PPro takes a dive. That was a shot in the dark of my own, and I expected it to fail. But now I have 600+GB of files that are in limbo. Thanks Adobe chat support for not being available during the hours listed on the support pages.

Maximising performance
Optimizing for performance: Adobe Premiere Pro and After Effects
http://blogs.adobe.com/aftereffects/2011/02/optimizing-for-performance-adobe-premiere-pro- and-after-effects.html

Premiere Pro 7.1 serious Multicam Editing problems

Similar Messages

Maybe you are looking for