Premiere Pro and Encore CS6 shutting down.

I recently switched my graphics card from a GTX680 to a GTX780. Everything worked fine until I did that. First I found that I had to add the card to the "approved cards" file for premier and after effects. I did that by simply adding it to the existing list and hitting save. That brought back the CUDA capabilities in those applications.
Premiere was running well but exporting the video ran into some problems. I exported a clip through Media Encoder and it was running great (and fast) until about halfway through and it just shut down Media Encoder with no warning. I tried the same thing exporting straight through Premiere and got the same thing then Premeir shut down. I tried different clips and different formats but got the same results.
When those programs shut down, the rest of the computer runs fine.
Are there steps I missed installing the new card? or do I need to change something in the Bios?
I am running a PC with:
Core i7 3770K (not overclocked)
Asus GeForce GTX780
G-Skill Ram at 32GB running at 1600
The BIOS was just updated in an effort to write that off as a problem.
Any help would be greatly appreciated

Thanks for your response Jim.
Here is the latest. The computer itself started shutting down while working in premiere so I went back into the BIOS and changed the RAM from 1866MHZ to 1600MHZ and that seems to have fixed the problem. I was able to render that file and the computer seems solid again.
I won't be excited until it goes the rest of the day today and tomorrow and renders a 60 minute file again. Not sure what the ram speed was set to before updating the BIOS so I am guessing that was it.

Similar Messages

Problem with premiere pro and encore with win7 enterprise 64-bit.

We are a college with approx 500 pc's running win7 enterprise 64-bit. Premiere pro and Encore will only open with admin login, not user login. All other packages ok. Any suggestions as to why this is?

Our lab has just had CS6 installed on it, running Win 7 enterprise. A user account will open a Premiere Pro project. I've done it. That was only to check that everything worked ok. I edited a couple of clips and stuck them on a sequence (16:9 PAL DV) and it played them ok and the project was saved back to the USB hard drive OK.
I have also opened up encore, made a new project and saved it to the USB HDD. No assets were added to it, just checking that the preference files had copied from the central server to the machine, so that users have certain options already pre-selected.
What exactly are the problems with Win 7 enterprise?
Andrew

I am trying to access Organizer in Premiere Elements and it just shuts down the programme

I am trying to access Organizer in Premiere Elements and it just shuts down the programme. I tried reinstalling the programme but it just does not let me get to Organizer. Now after reinstalling, it does not let me into the programme. It just keeps on asking me to sign in. Once I sign in, it just goes blank. I checked my registration online and it is already there. What do I do apart from tearing my hair?

namkeenrani
Again, do not duplicate or triplicate threads.
Please keep the discussion in the thread to which I have already replied.
Organizer in premiere elements 12
A moderator should be along shortly to close or delete this thread and the other of
your triplicates.
ATR

I plugged in iPhone 5 charger to my MacBook Pro and it immediately shut down and I can't get it restarted. Any ideas how to do this without removing the battery?

I plugged in iPhone 5 charger to my MacBook Pro and it immediately shut down and I can't get it restarted. Any ideas how to do this without removing the battery?

If you have your MBP charger, try a SMC reset:
http://support.apple.com/en-us/HT201295
If no success, make an appointment at an Apple store genius bar.
Ciao.

Error: Premiere Pro and Encore: Could not find video play modules

Please help! I am ripping my hair out!
I have CS3 Master suite and just reciently started having proiblems with Premiere Pro and Encode where I get an error: "Could not find video play modules, please reinstall and try again"
I HAVE reinstalled, and still no luck! I have even used the CS3 clean utility, blew away everything ADOBE I could think of, reinstalled - and that hasn't helped.
I have a Windows XP (32 bit) SP3 box
4 GB Ram
3.167 Ghz Intel Core 2 Duo processor
Nvidia GeForce GTX 285 video card.
All drivers are up to date.
I heard it could be a CODEC problem, but I do not know where or how to get the correct or missing CODECs. I also have AVID Media Composer 3.5 insalled on the box, but I'm not sure if that is creating conflict (it used to work before - not sure what happened).
Any help would be appreciated!
Thanks
Ryan

Ryan,
Could be a CODEC issue. First, get G-Spot and install/run it on your files. It will tell you exactly what they are, and what you need, if it shows them as not being installed.
Might be as simple as going to, say MainConcept's site, downloading and installing just the right CODEC. Without the info from G-Spot, we'd only be guessing.
Good luck,
Hunt
Tip: always install JUST the CODEC's that are required. Do not install any CODEC "packs." They will most likely give you problems someplace.

Loss of video quality & shaking on DVD after using premiere pro and encore to process material?

Hi guys,
This is my first post out here on the adobe forums (so be gentle) and i am having a small issue which i hope someone can help with.
I made a small video for a friend of mine of her and her partner over the last 10 years of them being together. There is only one small video piece at the start and the rest of the video is picture based with music in the background. Now, i cut, mixed and edited all this material they gave me in Premiere Pro. I also added menu breaks to be able to eventually create scenes in Encore.This worked fine and the quality was great! I then queued this up and added my time line into Encore and began working on the menu screen, scene buttons and using the orphanage to drag my content from. I also set up some poster frames and so far all looked great.
Before building the DVD, i tested for errors and all came back clear. I changed it burning directly to a dvd disc, and instead built it as a DVD image, which created an ISO file on on my pc. From watching a few tutroials, ImgBurn was suggested as a great tool to burn the ISO onto DVD. So far, this was looking good. I then placed my new DVD into my Blu-Ray/DVD player and on screen came this pixelated image. I wasnt terrible, but it wasnt great either, not the sort of quality i was used to. I proceeded to start the movie and the picture was worse, the screen was shaking up and down constantly (only by about half a centimeter up and half down) and the quality was terrible.
Is there anyway to fix this?
(Happy to run through all my settings with someone on the phone or online. Happy to call overseas in need be, as i am in Australia)
Thanks guys
Rein

erm... ok, you might have to go back a page or two... cause i am not so familiar with all the terms and lingo....lol
Where would i find this field dominance?
I did initially export it as a bluray, but then had to change it to dvd since i dont have a bluray burner. They dont give you any other options in encore besides DVD, Bluray or flash...

Premiere CC and Encore CS6

It appers that there is no Encore CC version and it cannot dynamicly link to Premiere CC kindof a huge kink in my workflow! Anyone else having this issue? For a work around i exported my timeline in media encoder using the DVD presets.

I just went here: https://creative.adobe.com/products/premiere and note that there's a drop-down menu - located under the text " "In this version" - where you can choose to download CS6. You download the entire suite, then discard (uninstall) everything except Encore. It should work.
I agree that it's annoying. Let's say there becomes a 4K version of Blu-Ray...how are we going to write them? Adobe owes us to acquire a new source of this capability. I know the problem is a licensing one with Encore - the company that developed Scenarist (on which Encore is based) sold it to a company called Rovi that has no intention of further developing it or licensing it to Adobe. That's not Adobe's fault. However, I understand Sony has a product that continues support; perhaps Adobe needs a new partner in this?
For the moment, I believe you'll get Encore downloaded and working. I've found that the lack of dynamic link works in my favor. Encore used to make its own choices regarding transcoding and they didn't always look good. I use the export settings in PPro and fine-tune the results so that they just fit the disc. Right now I'm editing and transcoding performances of MIKADO and MADAMA BUTTERFLY for Amore Opera here in New York City (took the videos in 4K with my new FDR-AX100 camcorder and edited in pans, zooms, cuts and dissolves...from the ONE camera, to output in HD!)...BUTTERFLY is 2 hours 15 minutes and it's a challenge but I found settings that work very well indeed. Switching audio from PCM to AC3, then adjusting the target bitrate until the file size is JUST under the max (the offered file size estimate is just that, an estimate, often on the small side so I sometimes have to transcode more than once. I also use "Wide Progressive" exclusively, and Encore with the Dynamic Link wouldn't make a file that way that I could use. The look is FAR superior to the interlaced DVDs of yore). The singers and orchestra not being automatons, the show is slightly different lengths on different nights. A full transcode on my system takes about an hour. Making the actual disc takes about 3 minutes. Amazing to watch.
You are DEFINITELY entitled to a copy of Encore CS6; you just have to fight for it. Let me know how you make out! Hint: Call corporate if the folks from India can't help you get it. They REALLY don't want to hear from us but they WILL help, in a pinch.

Help with Adobe Premiere Pro and AME CS6

Hi all,
First off, i would like to state that i'm pretty inexperienced in video editing, so please keep that in mind when answering or questioning something.I will try to explain my question to the best of my abilities, but please answer in a 'simple' manner, and don't shoot me when i miss something obvious.
I came across a 'performance?'-issue (slow exporting) for which i don't really know how to find the solution. I've been struggling with it for a while.
Your (any) help or insight is greatly appreciated!
My system:
Windows 7 Professional - 64 bit (Service Pack 1)
RAM 20 GB
Intel Core I73770 (dual quad core)
Direct x 11.0
Nvidia NVS 310
Adobe premiere pro CS6 (upgrading to adobe CC is unfortunately not an option)
Adobe media encoder CS6
They asked me to edit some video's on a regular basis, nothing complicated, just a 'training'-video. Length of video is about 2 hours edited.
File info:
Source file is 1920x1080 (1,0), 25fps, Upper, 2:11:10:24, 48000Hz, Stereo
There is one audio channel (left is standard mic, right is a shotgun mic) which is split to two audio channels, edited in aodbe audition (basic noise reduction)
I've been running into export times of over 12 hours (exported to mp4), which i'm guessing is a bit much.. . The slowness is also occuring with other export settings.
I came across a possible solution (in short: changing the Video Rendering and Playback in the project settings of APP) but that field is inactive for me...? what's up?
"Use Preview Files" works in CS5.5 but is "Useless" in CS6
I don't really know what to do from here, to figure out the solution. Any suggestions on fixing or troubleshooting the extremely long export times??
Thx in advance.

Dual video problems - Do you have dual graphics adapters?
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-Mac Utility for dual adapters http://forums.adobe.com/thread/1017891?tstart=0

Create a DVD using Premiere Pro and Encore - delay between audio and video (in ms)?

I created a DVD and need to be sure that audio and video are in perfect sync (smaller than 1 millisecond).
Is this even possible with Premiere Pro / with DVDs in general?
My sequence settings in Premiere are:
DV PAL, 25 fps, 720x576 (16:9), D1/DV PAL Widescreen, lower field first, Audio: 48000 Hz
My DVD settings in Encore are:
MPEG-2 (MainConcept MPEG-Video), 720x576, 25 fps, lower field first, Widescreen 16:9 (1,458), Bitrate VBR, 2-Pass, Min 1,5 MBit/s Target 4 MBit/s, Max 9 MBit/s, GOP: M-Frames 3, N-Frames 12, Audio: Dolby Digital, 192 kbit/s

I created a DVD and need to be sure that audio and video are in perfect sync (smaller than 1 millisecond).
Is this even possible with Premiere Pro / with DVDs in general?
Frame accurate is the best you can achieve and that means 33 milliseconds at best.

Library content missing for Adobe Creative Suite - for Premiere Pro and Encore. Use CS6 content?

Can I use CS6 download and installer and apply it to my CS5 programs?
Thank you!

The basic content is an installer, so I want to say "no."t But I don't know what it actually would do if CS6 is not installed. But the CS6 functional content installer (for PR and EN) REMOVES the CS5.5 Encore library. Go figure.
This was true some time ago, and I have not heard it was fixed.
If would try the process and see if the content can be uncompressed. In the end, it is just content in folders.
For the Encore full library templates and buttons etc, you can just expand the compressed file and use it in CS5.

Premiere ProCC and Encore Cs6 not compatible? (dynamiclink)

Hello community !
I am surprised and disappointed to see on the forum that there are no solution to import CC project to EnCs6 because dynamiclink not support CC projects!
How to import DVD , my chapter and my entire sequence?
Adobe does he foresee an update for this problem?
I am very unhappy because when downloading CC, it is not clear that E CC is not there yet and me imcompatibilité between PRCC and EnCs6!
Windowsseven64bit - nvidiaquadro4800-adobe creativecloud.

Install EncoreCs6 I can do thank you, but I'm not agree to spend more for a 5heure export mpeg!
Adobe is not going to pay me more time spent? !
By cons I pay my CC range at the same rate as the CS6 when it is less performente!
I do not agree, I do not pay a subscription with updated to regress into my work time!
I hope that this message ascend the developer of the range.
Create ENCC or compatible between CS6 and CC dynamiclink. And announce it to the future purchaser of the CC range. If I had known I would also stay on the range CS6 ...
I would like to know the rational explanation for Fester ence of EncoreCC

Just purchased Adobe Acrobat Pro and it keeps shutting down when I try to open it.

I keep getting an error message that acrobat quit unexpectantly.

Hi Anna.
Were you able to activate the product post purchase ? Try the following step and advise if this was able to resolve the query for you or not.
1) Navigate to C:\Program Files (x86)\Common Files\Adobe\SLCache and rename SLCache to SLCache_Old.
2) Navigate to C:\ProgramData\Adobe\SLStore and rename this to SLStore_old
Post doing the above, launch Acrobat and try to activate the product.
NOTE: If you have any other application installed on the machine, the above step would remove the activation for those products as well and convert them to a trial version.
Cheers,
Kartikay Sharma

Why does Macbook Pro have gray "curtain"and msg to shut down when playing video online?

Hi,
I have a MacBook Pro running Snow Leopard v 10.6.8 and have put on all the security updates.
I bought this machine just days after the newest MBP's were released with Lion because I wanted to stay with Snow Leopard
From the very beginning I would have occasional "gray screens" with a message that I'd encounterd a problem and needed to shut down. It always occured while I was watching a streaming video online (Flash?) but it didn't always happen. I updated my Flash plugin and that seemed to help. I use both Safari and FireFox and both are now updated to the latest versions.
I had also noticed via iCleanMemory that my memory availability was very low .....I always have many tabs open in my browsers and have backup software that backs up to online storage running and when I watched a video, it dropped to almost 0 and everything ran slow. I had 4 GB Ram.
So, I ordered new ram and put that in and now have 8 GB. Machine runs fast. Love it....except it keeps giving me that veil of gray and the message to shut down. It happens several times a day now and while usually in conjunction with watching a video clip, it's not always the case. But I have lots of available memory. That wasn't the issue.
I found an Apple Support paper relative to needing a video update on some mid 2010 MBP's and downloaded it. It won't install and says it won't run on my system so that didn't help.
I'm at my wits' end trying to keep this thing running. Everytime I have to shut it down it means a minimum of 8 min...sometimes more.....before it will restart. If I try to restart sooner than that, it begins to boot and then just has lines and lines of numbers and code running across it....and often continuous beeping sounds and I have to hold the button down to shut it off again. If I wait long enough, it does boot back up and sometimes runs fine as long as I'm not watching video clips, a streaming tv show or clicking on a lot of links in web pages.
I don't believe it has shut down when I was doing anything that wasn't web related....i.e. on a browser. And, when I was running with only 4 gb ram, it rarely shut down, just ran very, very slowly. Now with 8 gb ram it is speedy but doesn't seem to want to keep working!
Anyone have any ideas what I should try next?
Thanks
Paula

Hi Allan,
Thanks for your reply.
I have been closing iCleanMemory but the shut down (kernel panic) was still happening. Not sure how to go about uninstalling it as it's one that runs at start-up and dragging it to the trash might not get rid of it completely. I"ll find it's web site and see if they have any info.
Haven't checked your web link yet (it's late and gotta get to bed) but will do so tomorrow.
I also run Backblaze and DropBox that begin at startup and are constantly updating in the background, iStatMenus and Sharpshooter.
The kernel panics were happening....tho much less frequently.....before i put iClean Memory on. If I remember right, I installed it just because I had those periodic shut downs and wondered if it was a lack of memory. Because I then saw that memory was very low all the time, I decided I must need to put more memory in. And that seems to have made the issue worse while also making the machine work faster for the time it is running.
Now, I've been working on here for a couple of hours and had no problem at all......but I haven't asked it to play any kind of video. Before I quit for the night, I'll try to watch the last one I tried that caused it to shut down and see if it does it again.
I do appreciate your help as I have just enough knowledge about these things to be dangerous.
Paula

Error in premiere elements 11 program is not responding and needs to shut down

hi ,
Please help just installed premiere elements version 11 and many time this message is shown, program is not active and must be shut down, please wait until program reacts.
How can i solve this issue?

hi ATR,
Thanks for your prompt reply:
1 b. after you are in the workspace and are importing/editing/exporting? During Editing and add pictures and gopro files to the time line
2
1. Are you running the program as Administrator with an Internet connection?
No not running in admin mode.
Wifi connection is on
Do you have the latest version of QuickTime
Nieuw in QuickTime 7.7.6
installed on your computer along with Premiere Elements 11? yes
computer see attachment
2. Does the problem exist with or without the antivirus and firewall(s) disabled?
not tried yet , now avg 2015 virus scanner is on
3. Are you working with pen and tablet device instead of mouse?
No only laptop elan smart pad , on laptop.
4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card? How many
video cards/graphics cards does you computer use?
yes up to date only 1 card
5. Please describe your computer resources - processor, clock speed, installed RAM, available hard drive space?
Is the program installed to the default Local Disk C?
Installed on local disk drive C
See attachment for details

CS6 Premiere Pro and After Effects download

Is Premiere Pro and After Effects a part of the CS6 Design and Web Premium download? I cannot find PP and AE in my downloads or programs after I downloaded the Creative Suite 6 software. Where can I find them and how do I install to use?

Premiere Pro and After Effects are only included in Production Premium, Master Collection and Creative Cloud.
http://www.adobe.com/products/creativesuite/buying-guide.html
Both require 64 bit hardware and operating system.

Premiere Pro and Encore CS6 shutting down.

Similar Messages

Maybe you are looking for