Premiere Pro CC 2014 and Media Encoder CC 2014 not completing encode.

This is a project that I have been successfully encoding in short segments until now.  Now when encoding, session runs about 10-15 minutes and then ends without error messages. 
Removing effects and changing to Mercury PB Engine SW did not help. 
Also tried disabling metadata as suggested in another forum. 
When CUDA used, logged as "Encoding failed."  When Mercury SW used, logged as "File Successfully Encoded" even though video file is only 6 KB with no content.
Premiere Pro Build 8.1.0 (81)
Media Encoder Build 8.1.0.122
Windows 7 Professional
Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
8 GB RAM
NVIDIA GeForce GT 610 (9.18.13.3788)

I am having a similar problem.
Premiere Pro CC 2014 suddenly decided to crash every time I export to either Adobe Media Encoder or within Premiere itself.
The encode will usually go for 5-10 minutes before the programs either spits out a "serious error has occurred" window, or it just sits there frozen until I force quit.
I did find a work-around for the moment. If I open AME and FILE > OPEN, select my project and then the sequence I want, AND put it in Software render mode, it will work.
My timeline is 2K, 58 minutes in 23.976
Only effects applied are Lumetri LUTs - no third party.
I've exported as recently as a week ago without issue.
Running OSX 9.5 on an X99 board
3.75 GHz 8-core
64GB 2400 MHz RAM
EVGA Titan Black 6GB
Because I can get my renders out, I am not too concerned. Either there is something wonky with my timeline that screws with any graphics enabled rendering, or there is a bug that is have the same effect. I will try rendering on another of my edit bays that utilizes a GTX 580 that I KNOW works. The Titan is pretty new to my workflow.
Thanks Adobe, for checking this out.

Similar Messages

  • Upgraded to CC 2014 and Media Encoder doesn't work now.

    Using a mac with mavericks, all updated. Upgraded to Premiere Pro CC 2014 and Media Encoder CC 2014. But when I want to launch it... it won't open.
    Help?

    JUST FOR MAC USERS - Some 10.9.3 links
    -next link says After Effects, but check YOUR permissions !!!
    -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0
    -Mac 10.9.3 and CS6 https://forums.adobe.com/thread/1480238

  • Why is Dynamic Link between Premiere Pro CC 2014 and After Effects CC 2014 not syncing audio changes?

    When I try to use a Dyamic Link between something I've cut in Premiere and a composition in After Effects, if it is simply an audio level change it will not update in AE.  Only if I alter the Video track does it then take the changes reflected.  Any suggestions as to what is causing this?
    Running Adobe Premiere Pro CC 2014 and After Effects CC 2014.

    As Dave alludes, AfterEffects is all about the visual changes ... or at least, mostly. For changes to the audio outside of PrPro's internal controls, highly suggested you use Audition instead. It is all about the sound ... and yes, will update PrPro when used correctly.
    Neil

  • Premiere Pro update problem and AME bug

    After renaming the folders and emptying the Media Cache database in the Preferences I thought everything was working, that is until I exported my project to the updated Adobe media encoder. There was no audio playing back from the rendered file and my clips from the Canon 5d were missing which are not acvhd. This is a multi-cam project and the audio that was used was from the acvhd clips. Pretty weird..... So I tried exporting the project from within Premiere to bypass the AME and it worked perfect.

    In AME, please go to Preferences>General and disable the Import Sequences Natively option. Then export the sequence from Premiere Pro to AME and see if the problem persists.
    If this change resolves the issue, then we'll be interested in getting a copy of the project, if possible, to test with.

  • How to work with Premiere Pro cs5.5 and After Effects cs5 together?

    I have edited my movie in premiere pro cs5.5 and made the rough cut. In premiere, i have edited the video, put in soundtrack and foley. Now, i need to add muzzle flashes & blood splatters in some scenes and final color correction using After Effects cs5.
    When i import the premiere project in AE and make the changes, and then i export it back as premiere project. When i open this prmiere project, it shows vaious kind of errors and no changes are retained that i did in AE. Also, when i import the premiere project (which has 4 different sequences) in AE, all the media that has been imported in the premiere project also opens in AE making it difficult to organize the media.
    How should i work now so that i add vfx and color correction using AE cs5?
    I thought of exporting the video from Premiere pro and then open the video in AE and add vfx to some scenes and color correction to the full video and render it out again. But, this is the first time i am using AE and i am not sure if this is the best way. PLEASE HELP.
    Or, i could import the whole project in AE, add vfx, do color correction AND then export to video from AE. But i think, it will be better if i export the video from Premiere as it has loads of options to choose from while exporting to a movie.
    The dynamic link does not work between Premiere Pro Cs5.5 and After Effects cs5. Even if it does, its not working on my pc.
    All the footage is in HD and i want the final result in best quality HD too. PLEASE Help!

    If you are working between After Effects and Premiere Pro but with versions that are not the same number, you need to just work with movies rendered and exported as intermediate, lossless files.
    Dynamic Link only works between After Effects and Premiere Pro of the same version number, and only when they are installed as part of the same suite.

  • I need to create DVDs but Premiere Pro requires Encore, and Encore is no longer available

    I had Encore installed, but it gave me error messages when trying to import a Premiere Pro CC 2014 file. Following the advice from the support listings, I uninstalled Premiere Pro, then downloaded and ran the Adobe cleanup file, which removed my copy of Encore. Now I can't find a way to download it again because it's only available if I download Premiere Pro CS6, and there's no way to find and download PP CS6.
    I'm in the middle of a project for the Library of Congress, that requires me to send a DVD. Adobe should recognize that DVDs are still important for some applications, and should be making Encore as available as all the other applications in Creative Cloud. This has become a very frustrating process when it should be getting easier.

    Are you sure? CS6 still shows up in my Creative Cloud app (which I upgraded moments ago, by the way).
    Your point is that PR/EN CS6 is still available, and that is true.Your list is of the "installed apps" section and indicates that it is already installed. The poster indicates it was uninstalled and he should be looking in the "find new apps" area. Many users appear to be continuing to install PR CS6 with EN CS6. But others are having problems (as some have all along).
    A new problem appears to be that users seem to believe they have to uninstall PR CC in order to add PR CS6. And some odd errors have added fuel to the fire.
    The errors referred to by this user were probably no more than trying to dynamic link from PR CC to EN, which, of course, does not work.

  • Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

    My XP machine crashed, I reinstalled Premiere Pro 2.0 with Windows 7, and I got the following error: 'The Currently installed soundcard driver does not support Direct Sound Input. Recording audio is not possible.' The soundcard drivers are updated. Any ideas? Here's what I have: AMD Phenom II X4 965 Processor  3.40 GHz 8 GB, 64 bit. Thank you for looking.

    Thanks! Though I upgraded to solve the problem, this is good to know.
    Bob
    Date: Wed, 9 Nov 2011 04:45:42 -0700
    From: [email protected]
    To: [email protected]
    Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
    Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
    VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
    Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
    AND NOW YOU CAN USE PREMIERE PRO 2.0
    Enjoy
    Steve - Italy
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Premiere Pro 2.0 and Windows 7

    Is Adobe Premiere Pro 2.0 (and other software included in ProductionStudio PRM 1.0) supported by Windows 7?

    Harm,
    Is it really that easy?  So, there is no need to download Windows XP Mode and Windows Virtual PC (http://www.microsoft.com/windows/virtual-pc/default.aspx)?
    Of course I would prefer to upgrade to at least Adobe CS4 Production Premium, but the best price I could find was $400 on studica.com.  Or I could upgrade my Adobe Production Studio Premium to CS5 Production Premium for $800.  But, these are not options for me right at this moment.
    Thanks so much,
    Angela

  • Premiere Pro CC Source and Program Playback Controls not working.. help please.

    Hi,
    Need your help to find out why none of the Premiere Pro CC Source and Program Playback Controls are working.. I can do playback using spacebar, but not clicking on the controls... same goes the rest.
    Thank you,
    Mauro

    Dear Mark,
    Thank you for the hint/link, reseting the toolbar did the trick.
    Regards,
    Mauro

  • Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage?

    Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage? I import my footage into the project like normal. I drag it to the source monitor on the left hand side to set in and out points then I drag it to the time line. The footage drops into the time line with no problem but when I go to play the footage in the time line it plays back on the source monitor and not on the program monitor like it is suppose to. Other times ill drag the clip to the time line and trim it there and it will be fine and show up on the program monitor.  Then ill go try to set a clip to have in and out points (which is suppose to show up in the source monitor) but it shows up in the program monitor. The clip is not even in the time line it should not be on that monitor! I have updated the program to the late update. I have re installed the program numerous times and I have even ran the Adobe Clean up program. Couldn't find much on this problem. Please help thank you! I have a PC. My computer is also way over the recommended minimum specifications to have the program installed on.

    Definitive Answer (I believe): It's all about this setting, "Write XMP ID To Files On Import" - which confirms that Adobe Premiere Pro is deliberately modifying the .mov file: http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
    These posts give some background as to why having this setting enabled would be beneficial: one benefit being to be able to skip conforming files by matching the conformed file with the original using the embedded XMP tag :-
    http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
    http://www.dvinfo.net/forum/adobe-creative-suite/498627-why-premiere-modifying-video-files .html
    https://forums.creativecow.net/thread/205/876064
    (Found using Google search term "adobe premiere pro date modified")

  • Hi i was told to come to the support with the error number 16.... for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

    hi i was told to come to the support with the error number 16. for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

    Hi Omid,
    Please refer to the help document below to fix the error 16:
    Configuration error 16 | CC, CS
    If the issue persists, please contact the support:
    Contact Customer Care
    Regards,
    Sheena

  • Premiere Pro audio problem and crash

    Yesterday I got an error multiple times which then led to PP crashing.
    I imported an audio track, placed it in my time line, and when i went to adjust gain is when it would freeze/error/crash.
    The error i got was:
    [/Volumes/BuildDisk/builds/MightySilt/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/../.. /Src/Mac/MacFile.cpp-1104]

    In AME, please go to Preferences>General and disable the Import Sequences Natively option. Then export the sequence from Premiere Pro to AME and see if the problem persists.
    If this change resolves the issue, then we'll be interested in getting a copy of the project, if possible, to test with.

  • My songs are not being copied to my iPhone and even the sync is not completing every time it just shows that changes are being applied but nothing is happening on my iPhone

    My songs are not being copied to my iPhone and even the sync is not completing every time it just shows that changes are being applied but nothing is happening on my iPhone

    Hello transcend94,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    iTunes: Understanding iTunes Media Organization
    http://support.apple.com/kb/ht3847
    Avoid using different versions of iTunes, or you may be unable to locate content, or may import or transfer content to the wrong location.
    Best of luck,
    Mario

  • TS1368 When I try to connect to iTunes, it doesn't work and tells me "We could not complete your iTunes Store request. The network connection was reset."

    When I try to connect my newly restored iPhone 4 with iOS 7 on it to iTunes, it doesn't work and tells me "We could not complete your iTunes Store request. The network connection was reset." My network connection is working perfectly fine.

    Hello donnafromwakefield,
    The article linked below details steps that can help restore your computer's ability to connect to the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/en-us/TS1368
    Cheers,
    Allen

  • I am trying to download OS X Lion from the app store and it says it can not complete my purchase becuase it needs at least 2GB of space and i have that

    i am trying to download OS X Lion from the app store and it says it can not complete my purchase becuase it needs at least 2GB of space and over 2GB on my computer...any ideas??

    That requirement is referring to the need for 2gB of RAM, not hard drive space.
    Stedman

  • When I try to sync my iPod iCal with my MBP iCal via WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete"

    When I try to sync my iPod iCal with my MBP (OS 10.7) iCal via iTunes and WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete because the downloading never completes because I am not connected to the internet.
    Why does syncing iCal need Safari Safe Browsing Data?  How can I turn this off?

    See:
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    "Safari Downloading Safe Browsing Data" is just some data that is synce with the computer. To turn off on the Mac go to System Preferencs>iCloud and turn off Safari

Maybe you are looking for