Premiere Pro CC 2014 - audio frame repeating while scrubbing

In 2014 and CC, I often run into an issue where an audio frame will repeat while scrubbing.  It stops when I hit play or move the cursor to another part of the timeline.  Obviously, this makes audio editing a nightmare.  I've checked all the settings and I'm at a complete loss.  I've unchecked "maintain pitch while shuttling", but the problem persists.  Is there something I'm missing?
I've searched the forum, but haven't found any answers.  Any info would be greatly appreciated.
Premiere Pro CC 2014 (8.0.1)
Mac OSX 10.9.5
2 x 2.4 Quad-Core Intel Xeon
24 GB 1066 MHz DDR3
NVIDIA GeForce GTX 680 2048 MB
KONA LHe+ (5/14/13 firmware)
ProRes LT (.mov)
No third party codecs

Apparently this only happens when holding down the next or previous frame keys.  Individual clicks don't seem to cause the repeated frame.

Similar Messages

  • Audio-Problem with Adobe Premiere Pro CC 2014 by using long Clips in AVC-Intra Codec (4Gb Border)

    Hello
    We own a Panasonic camera (AJ-PX5000G) and we film in 1080p50 with the AVC-Intra100 Codec. When importing longer clips in Premiere Pro, the video is fully loaded, but the waveform of the sound ends at the Time Code 00:02:28:35.
    Sometimes the sound could be played after this Timecode but otherwise there is no audio. Even if we use the same clip several times we see that it works sometimes and sometimes not. It looks random.
    We also tried to import the Clips with Adobe Prelude directly from the P2-Card but there are the same problems.
    The Clips in 1080p50 AVC-Intra100 have a bitrate of 227Mbps. After 2 Minutes and 28 Seconds 4Gb are written on the P2-Card and the Camera starts a new picture file and 4 sound files..
    It looks like Adobe Premiere Pro has problems with the correct relation of the files that all get together to one clip.
    Is there anybody who can confirm this problem? Can anybody help me with this Premiere Problem?
    Dennis
    (Workstation:  Dell Precision T3600, Intel Xeon E5-1620 @ 3.60 GHz, 16 GB RAM, Windows 7 Professional 64-bit, Service Pack 1, Premiere Pro CC 2014.1 (Build 8.1.0)   )
    Mediainfo of the P2-Cards:
    General
    Complete name                            : \CONTENTS\VIDEO\0068T7.MXF
    Format                                   : MXF
    Format profile                           : OP-Atom
    Format settings                          : Closed / Complete
    File size                                : 3.92 GiB
    Duration                                 : 2mn 28s
    Overall bit rate                         : 227 Mbps
    Encoded date                             : 2014-10-15 13:33:41.000
    Writing application                      : Panasonic P2 2.0
    Writing library                          : Panasonic P2 2.0
    Video
    ID                                       : 2
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : High 4:2:[email protected]
    Format settings, CABAC                   : No
    Format settings, GOP                     : N=1
    Format settings, wrapping mode           : Clip
    Codec ID                                 : 0D01030102106002-0401020201323104
    Duration                                 : 2mn 28s
    Bit rate                                 : 227 Mbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate                               : 50.000 fps
    Standard                                 : Component
    Color space                              : YUV
    Chroma subsampling                       : 4:2:2
    Bit depth                                : 10 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 2.193
    Stream size                              : 3.92 GiB (100%)
    Color primaries                          : BT.709
    Transfer characteristics                 : BT.709
    Matrix coefficients                      : BT.709
    Mediainfo Audio-Datei P2-Card:
    General
    Complete name                            : \CONTENTS\AUDIO\0068T700.MXF
    Format                                   : MXF
    Format profile                           : OP-Atom
    Format settings                          : Closed / Complete
    File size                                : 13.6 MiB
    Duration                                 : 2mn 28s
    Overall bit rate mode                    : Constant
    Overall bit rate                         : 770 Kbps
    Encoded date                             : 2014-10-15 13:33:41.000
    Writing application                      : Panasonic P2 2.0
    Writing library                          : Panasonic P2 2.0
    Audio
    ID                                       : 3
    Format                                   : PCM
    Format settings, Endianness              : Little
    Format settings, wrapping mode           : Clip (AES)
    Codec ID                                 : 0D01030102060400
    Duration                                 : 2mn 28s
    Bit rate mode                            : Constant
    Bit rate                                 : 768 Kbps
    Channel(s)                               : 1 channel
    Sampling rate                            : 48.0 KHz
    Bit depth                                : 16 bits
    Stream size                              : 13.6 MiB (100%)

    Hi,
    we have the same problem!
    It is not possible to play audio with the AVC-Intra100 Codec fluently.
    Can anybody help?
    Thanks,
    Anja

  • Premiere Pro CC 2014 (8.1.0) freezes while scrubbing timeline

    Using a Mac Mini (late 2012 model), running Mavericks 10.9.5
    Processor: 2.6 GHz Intel Quad Core i7
    Memory: 16 GB
    Graphics: Intel HD Graphics 4000 1024MB
    I am also using a 2TB Fantom G-Force Megadisk external HD to store all my media. It is connected via a Firewire 800 cable
    I've been having a lot of trouble with Premiere Pro CC 2014. While scrubbing through a project, a frame will all of a sudden freeze in the program monitor. I have my processors displayed on my menu bar and I've noticed that whenever I run into lag time or freezing the 8 processors won't all be firing, usually just one is actually working at that time. I am also only running one program at a time as to not tie up my processor.
    All of my source files are usually AVCHD. Most of my work is under 10 minutes long, so they are just short corporate videos not feature length movies.  I understand that editing native files can really slow your processors so with my latest project I consolidated and transcoded in the Project Manager to Apple ProRes in order to test that. Even with that I'm still having the exact same problem.
    These are some other steps I've taken to correct this:
    I've contacted Adobe several times and they told me that the Graphics Card is known to have problems and to contact Apple. I contacted Apple and they said there are no known problems with that Graphics Card it sounds like a software issue. I ran a disk permissions test and uninstalled and reinstalled the software. Same problems. Nothing has worked.
    I've trashed my preferences as well
    Really it seems that both Adobe and Apple are pointing the finger at each other. All I want to do is edit my videos without having to restart Premiere Pro every 10 minutes.

    This seems to be an issue for me A LOT too. I can't keep Premiere open for more than 2 minutes at a time right now. The Customer Service rep from India did a "Team View" on my computer before and after 45 minutes finally fixed the issue. But I can't seem to get a hold of customer support right now. I hope you and I both find a solution soon. Good luck!

  • Premiere Pro CC 2014 QuickTime Audio and Video Syncing problem

    Hi everyone,
    I am having and issue when I import QuickTime video into Premiere Pro CC 2014. I've just started doing some editing so I am very new to all of this. I recorded video in Photo Booth on my mac. I exported the file to a .mov file and imported it in to Premiere. When I play the file in premiere everything is fine up until halfway through the video. The video starts to play faster than the audio and everything is off. When I play the video in QuickTime everything is fine. I don't know if I did something wrong when I imported the file but I am hoping for some help. Thank you.

    I would be willing to bet the video is recorded as VFR, variable frame rate ... in other words, it creates more frames per second when it needs to for keeping up with screen changes, and less when it doesn't see much changing on your screen. This saves bandwidth of course, BUT ... PrPro is not setup to work well with VFR footage, it really needs CFR, constant FR. So ... highly recommended if your capture program doesn't allow setting CFR is the free program "Handbrake", which you can google for. Use that to convert the footage to CFR, then import that into PrPro.
    Neil

  • Audio Gain Crash - Premiere Pro CC 2014

    Working in Premiere Pro CC 2014 I'm experiencing an instant crash when using the Audio Gain function on a clip or any selection of multiple clips in a sequence.  The clip(s) in question come from a TASCAM DR-100 audio recorder I've used dozens of times without issue.
    ASUS G75
    Windows 7, 64-bit
    Intel i7-3630qm
    16GB RAM
    NVIDIA GTX-670MX

    I found it strange that this was happening only on two of my sequences (timelines) in the project, while other sequences have no issue with Audio Gain.  It's either the sequence, or one-or-more clips—not Premiere, right?  First, I ran CCleaner and re-launched Premiere.  Clearing system crud with CCleaner seems to have aleviated the problem for *some* of the clips.  I could now perform Audio Gain functions on some of the clips.
    So my next thought:  Clean the Media Cache in Premiere.  I tried that next.  When I re-launched Premiere and the conform process begain to do it's thing, building new files.  When it was done, ALL of my clips could be selected and Audio Gain performed.  SUCCESS!  The answer to Audio Gain crashing Premiere Pro, in my case, was to clean the media cache.
    Interestingly, that's not the end of the story; there's still some funky issue with one single audio clip in this sequence.  But since the Audio Gain crash isn't happening anymore, I'll present the new issue in a new thread.

  • Can't Move Audio Clips in Timeline After Expanding to View Waveforms (Premiere Pro CC 2014.2)

    So, this seems to be a bit of a weird one, and I'd be pretty stoked if it ended up being something silly that I'm doing wrong, but I can't for the life of me figure out what that might be.
    As the title suggests, I can't use the mouse to move some audio clips in a timeline once I expand the track to view the waveforms. This appears to only happen with independent audio clips (WAV. AIFF, MP3, etc), and not with clips attached to video. Also, it's worth noting that I don't have track keyframes turned on. I was hoping that was it, but it wasn't.
    So, what happens is this:
    1) I drag an audio clip down to the timeline (I can drag it onto an existing track, or drag to the bottom of the sequence and create a new track. Neither option seems to get a different result.).
    2) So long as the track isn't expanded and the waveform isn't visible, I can move the clip left, right, or up and down to a different track.
    3) As soon as I expand the track to view the waveform this functionality goes out the window. When this issue happens I can use the keyboard to nudge left and right, but that's about all the movement I have.
    4) It's almost as though the track becomes corrupt. The lanes for the track don't redraw properly, and the track is pretty much unusable. I can't put anything into it, and I can't take anything out. All I can do is delete the track and start again.
    Complicating issues is that this doesn't always happen, but instead is one of those "vast majority of the time" issues. I can't see any rhyme or reason for why it works or doesn't. I seem to do the exact same thing, but occasionally get different results. It doesn't matter what type of file I'm using (WAV, AIFF, etc), and this only happens with independent audio clips.
    Once again, I don't have track keyframing turned on when this happens. Believe me, I wish that was it.
    I have already filed a couple of bug reports about this over the last month or so, but haven't heard anything yet. I was wondering if anyone else was having the same issue, and if so, whether they had any workarounds.
    Mandatory system info:
    Windows 7 Professional SP1 (64-Bit)
    Intel i7-3820
    32GB RAM
    Nvidia GTX 980 (350.12)
    Premiere Pro CC 2014.2

    Update:
    I was just looking to post a screenshot of the timeline when I discovered something interesting. As soon as I use the vertical scroll bar to the right of the sequence, the tracks start to work again. Close off the waveform and the clip goes haywire. Move the scroll bar a tiny bit (or a lot), and suddenly the clip starts working.
    Pretty bizarre.
    The good news is that for the time being that could be a workaround, though it would be great for this to not happen at all.

  • Premiere Pro CC 2014 very unresponsive while rendering on background with Adobe Media Encoder

    Usually while I eddit videos on Premiere, I'm rendering on the background with AME. Or at least I used to. Some time ago, this process suddenly stopped working, as rendering on the background bagan to make Premiere really unresponsive, and quite impossible to work with. I couldn't think of any change I made other than switching my HDD, and I blamed it on that (it made sense because new HDD is one of those WD Green ones, a little worse than my old Seagate one). So I adapted to just queueing everything and start rendering when I was done edditing. But yesterday I installed a 240gb Kingston HyperX SSD, re-installed Windows and the main apps on it, and tried again, hoping to see an improvement. Now I was storing the original media on the HDD, running OS, Premiere and AME on the SSD, and rendering to the HDD. It did not work. Premiere still became slow while I rendering with AME. So I thought it might get better if the HDD was not reading and writing at the same time, and I switched the original media to the SSD, while still rendering to the HDD. Also didn't help. I don't know why this setup suddenly does not work, and I really need to fix it.
    My setup:
    Windows 7 Home Premium 64bit
    Intel Core i7 2600 @ 3.4GHz
    12GB of RAM
    nVidia GeForce GTX 560 (yes, drivers are up to date)
    Dual monitors (one for Premiere workspace and one for a bigger program monitor)
    2TB WD Green HDD where I keep most of my junk (and media files)
    240GB Kingston HyperX SSD where I run the OS and important apps (Premiere and AME included)
    I'm running Adobe Premiere Pro CC 2014 (8.1.0 build) and AME CC 2014 (8.1.0.122 build)

    Hi chriscorrell,
    Thank you for posting on Adobe forums.
    Upgrading your OS might be a good idea because Premiere CC 2014's OS requirement is OS X 10.8.
    See here: System requirements | Adobe Premiere Pro
    Thanks,
    Rameez

  • Why is Dynamic Link between Premiere Pro CC 2014 and After Effects CC 2014 not syncing audio changes?

    When I try to use a Dyamic Link between something I've cut in Premiere and a composition in After Effects, if it is simply an audio level change it will not update in AE.  Only if I alter the Video track does it then take the changes reflected.  Any suggestions as to what is causing this?
    Running Adobe Premiere Pro CC 2014 and After Effects CC 2014.

    As Dave alludes, AfterEffects is all about the visual changes ... or at least, mostly. For changes to the audio outside of PrPro's internal controls, highly suggested you use Audition instead. It is all about the sound ... and yes, will update PrPro when used correctly.
    Neil

  • When clicking an audio clip on the timeline in Premiere Pro CC 2014, it duplicates it on a different track and makes it impossible to work.

    I'm experiencing a disturbing issue as it actually prevents me to do the work in Premiere. I will put as much info as possible:
    1) Project started on a different computer (the editor), PC with Premiere Pro CC,
    2) Now opened on my Imac with Premiere Pro CC 2014,
    3) I am not editing, simply trying to move audio clips on different tracks to export audio tracks only,
    THE ISSUE:
    1) Here is my timeline:
    2) When I select an audio clip to highlight it, Premiere creates a duplicate on a different track:
    Note that the clip highlighted in the previous screen cap is the duplicate and I didn't click it, Premiere highlights it as soon as it is duplicated.
    3) When I click out of the timeline or scroll up or down on the timeline, the duplicates disappear. However, when I try to move the original clips, it doesn't do anything, they are stuck in place.
    ANTICIPATED ANSWERS:
    1) You work on 2 different computers with 2 different versions of Premiere Pro CC, what do you expect? --> The amazing thing about Adobe CC is that it shouldn't be an issue and now I have to deal with it in this way,
    2) Try and save an updated version of your project from your computer. --> Already done that.
    Thank you for your help. I usually use the customer support chat but I am on the other side of the globe and it is now closed. This issue prevents me to work so I need to solve it quickly.
    Kind regards,
    Aurelien

    This sounds to me like it could be a graphics related problem are you on the latest driver. Something else you could try, start a new project and import the one from the PC into that rather than directly opening it in the MAC

  • Premiere pro CC (2014) problems with audio on .mts files

    Hi,
    This is a recent problem I have been having when trying to play certain clips in Premiere Pro CC (2014), I import the entire private folder and some of the clips play as normal and others seem to have skipping audio. This causes the second half of the clip to not have any audio in it at all because it is bunched up at the beginning. I don't even know where to start with trying to fix the problem, the only thing I have done is re import the files and put them in new folders to change the destination it has been imported from.
    Any advice would be extremely helpful as it is mostly stopping me from getting on with any work,
    Thanks!

    Hi amber1992,
    I will suggest you to go ahead and clean the Media cache and Media cache files folders manually.
    MAC OS: Click on Go menu>Go to Folders>type ~/Library and click ok. This will open User Library folder and then navigate to Application Support>Adobe>Common>Media Cache and Media Cache files. Delete all the files from these folders.
    Windows: C:\Users\username\AppData\Roaming\Adobe\Common or you can Click on Start button and in search type %appdata% and open Roaming folder>Adobe>Common>Media Cache and Media Cache files.
    Once done launch the project again and check.
    Regards,
    Vinay

  • An error has occurred while opening the Premiere Pro CC 2014: Premiere Debug Event

    An error has occurred while opening the Premiere Pro CC 2014: Premiere Debug Event
    [c: \ cloudroom \ releases \ 2014.9 \ shared \ adobe \ mediacore \ mediafoundation\API\in
    I don't know what to do, any help?

    Delete the  Effect Presets and Custom Items.prfpset, located in
    C:\Users\<username>\Documents\Adobe\Premiere Pro\8.0\Profile-<username>
    when succesfull make new project and import old one into new one.
    Might need to reset current workspace and pull down the audiotracks first to reveal videotracks.

  • Why can't Adobe Premiere Pro CC 2014 Time remap Audio and Video together?

    In case you didn't notice, my question is WHY.  I don't know why Premiere Pro can't do this.  From what I understand at the moment, the only way to time-remap audio in any way shape or form using Adobe software is through Adobe After Effects, which my computer has absolutely no chance of running ever.  I know how to do regular stretching of audio in both Audition and Premiere Pro, but apparently I can't time-remap audio using either of these programs.
    So why can't Adobe Premiere Pro time remap audio along with the video?  What's the reason that it can't?  It's a massive disappointment and would be very impressive to see accomplished in the future.  If it's possible to time remap audio and video together in After Effects, that's great and all, except for the fact that I can't use that program.  Why can't it be done in Premiere Pro and will it ever be possible in Premiere Pro?
    Also, will time remapping audio become possible in Audition someday?

    That sounds like a great idea.  File a Feature Request:
    Adobe - Feature Request/Bug Report Form

  • Premiere Pro CC 2014.2 Crashing while loading project...

    When trying to open Premiere project the program opens and looks like it will load and then crashes.
    If I create a new project Premiere opens and I can import footage but as soon as I try to play footage in the preview window or drop it in the timeline the program crashes as well.
    I am working on a Windows 7, 64-bit, i7, 8GB ram, 1TB multiple partitioned hard drive. My Graphics card is, Intel(R) HD Graphics 4600 - Driver Version: 9.18.10.3204
    My Error Log is:
    Faulting application name: Adobe Premiere Pro.exe, version: 8.2.0.65, time stamp: 0x5486db4a
    Faulting module name: MXF_SDK_4.4.33_vs10.dll, version: 4.4.33.0, time stamp: 0x534d772c
    Exception code: 0xc0000005
    Fault offset: 0x00000000000bdc55
    Faulting process id: 0x378c
    Faulting application start time: 0x01d02c3625e455c1
    Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
    Faulting module path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\MXF_SDK_4.4.33_vs10.dll
    Report Id: b1b66e81-9829-11e4-95ce-c4346b64bc4f
    I can't figure out what the faulting module is.
    I just installed CC 2014.2 3 days ago. It all worked fine until yesterday when Premiere started crashing. I restarted the system - same issue. I uninstalled and reinstalled Premiere2014.2 - same issue. Premiere seems to be the only faulting application. Everything else (Ps, Ae, Lr, Id, Au, Ai) appears to still be working.
    My version of CS6 (Purchased before getting a creative cloud membership not downloaded through CC) is also still working properly.
    Thanks for the help.

    Update: I updated my Graphics Card Driver to a more recent version. Restarted computer and reopened Premiere and similar crash happened. I went through to get some more crashes and had different crash reports. The faulty module is not always the same.
    Problem Event Name:                        APPCRASH
      Application Name:                             Adobe Premiere Pro.exe
      Application Version:                           8.2.0.65
      Application Timestamp:                     5486db4a
      Fault Module Name:                          devenum.dll
      Fault Module Version:                        6.6.7600.16385
      Fault Module Timestamp:                  4a5bded7
      Exception Code:                                  c0000005
      Exception Offset:                                00000000000016a0
      OS Version:                                          6.1.7601.2.1.0.256.48
      Locale ID:                                             1033
      Additional Information 1:                  ec5a
      Additional Information 2:                  ec5adb2545b190cc19da7bdfa78d5bf1
      Additional Information 3:                  6e59
      Additional Information 4:  6e59168cf9de1a4a9616903b4a4ba1e1
    Problem Event Name:                          BEX64
      Application Name:                             Adobe Premiere Pro.exe
      Application Version:                           8.2.0.65
      Application Timestamp:                     5486db4a
      Fault Module Name:                          OpenCL.dll_unloaded
      Fault Module Version:                        0.0.0.0
      Fault Module Timestamp:                  50eb1a5b
      Exception Offset:                                000007fee84516a0
      Exception Code:                                  c0000005
      Exception Data:                                   0000000000000008
      OS Version:                                          6.1.7601.2.1.0.256.48
      Locale ID:                                             1033
      Additional Information 1:                  a527
      Additional Information 2:                  a527a6af76c2b04cfd1fc255c66e5364
      Additional Information 3:                  21c7
      Additional Information 4:                  21c71ffc516aa3806e495b8080bd51fe
    Both of those are different from the original posted report.
    I did have some success following these instructions.
    Premiere Pro CC 2014.1 has stopped working - Win 7 64 bit
    It appears I do not have a graphics card that is compatible with the mercury engine. I have had three successful tests and one crash since I selected Renderer: "Software only"
    I plan to upgrade to a Nvidia card or the supported Intel Iris Card.
    This seams to be the issue but I am hesitant to use CC 2014.2 for the time being because I don't know if it will crash randomly and CS6 is working fine. The second error code with "Fault Module Name: OpenCL.dll_unloaded" seems to be directly related to the graphics card and rendering processes. I will update as I learn more.
    Please comment with any suggestions or resolutions you have had.

  • Why is my Premiere Pro CC 2014 program the wrong resolution(looks huge on my screen) while Premiere Pro CC looks fine?  CPU AMD FX(tm)-8350 eight core processor, GPU GeForce GTX 650, Memory 16gb, Windows 7 Ultimate 64bit

    Premiere Pro CC 2014
    Premiere Pro CC

    Hello Ashraf,
    Sorry you didn't get any help on this post. In the future, please contact Adobe Support for 1-1 assistance on issues like this: Contact Customer Care
    Thanks,
    Kevin

  • Adobe Premiere Pro CC 2014.2 (8.2) freezes up constantly on Mac OS X Yosemite

    After the latest update (no idea which one but the latest update) Premiere Pro cc just keeps freezing up constantly. There's no indication what brings it up but after different periods of time I just get the apple wheel and the entire program freezes up. I force quit and get the "sorry, a serious problem has occured", blabla. Sometimes it's in the middle of cutting a clip, sometimes it's while trimming. There isn't a single indication what causes it. At first I thought it was only because of using a multicam clip, but that's not the case anymore. I tried reducing memory to other apps, deleting preview files, deleting autosaves, turning off autosave altogether, deleting Adobe Premiere 8.0 preference file, changing permissions, basically everything in this post: Re: Adobe Premiere Pro CC keeps crashing... (Which now also seems totally neglected by Adobe).
    Believe me, there's hardly a thing I haven't tried.
    It's getting REALLY frustrating now and it's time something is done about this. Yes I know, "don't just say it's frustrating, explain the problem", but that fase has passed now. I'm paying for this product and it needs to work like it should.
    Also I know I'm not the only one who's having these problems.
    My specs are:
    OS X Yosemite 10.10.1
    MacBook Pro (Retina, Mid 2012)
    2,3 GHz Intel Core i7
    16 GB 1600 MHz DDR3
    NVIDIA GeForce GT 650M 1024 MB

    Hi JJ,
    JJ Millen wrote:
    It is not about the past times you may or may not have participated, but about the latest message from rob654 and my last messages in that thread (which are clearly not about Windows).
    One great reason to get a Mac only version of the post. It is never a good idea to post on a Windows post with Mac problems. And when threads get so long and unruly, the team can't focus on the actual issue so it doesn't get the attention it needs.
    Now that we have that sorted out...
    JJ Millen wrote:
    I checked that and it says 8.2.0. (65) build.
    Thanks for the verification. You are running Premiere Pro CC 2014.2 (8.2). It helps to have that absolutely clear.
    JJ Millen wrote:
    Here are all the checkpoints mentioned in that thread, applicable to my project:
    - Version 8.2.0;
    - My Creative Cloud says Premiere Pro is up-to-date;
    - Operating system is OS X Yosemite version 10.10.1 (14B25);
    Very well, did things operate any differently on Mac OS X 10.9.x? Or did you have the same problem?
    JJ Millen wrote:
    Type: MPEG Movie
    File Size: 4,0 GB
    Image Size: 1920 x 1080
    Frame Rate: 25,00
    Source Audio Format: 48000 Hz - 16 bit - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00:12:35:16
    Pixel Aspect Ratio: 1,0;
    So is this H.264? What is the camera that you are working with? DSLR?
    JJ Millen wrote:
    - I do not get any error messages, except for the "Sorry, a serious problem has occurred"-message after I have to force quit my Premiere because of the freeze;
    What kind of drives are the media files stored on?
    Are the permissions set correctly (as Read/Write) for the Mac HD and your media drives?
    Are the permissions set correctly for all the Adobe folders as I outlined in my blog?
    JJ Millen wrote:
    - The problem mostly occurs when cutting a clip with the razor tool, regardless of the kind of clip;
    When you import clips, are you using File > Import, or are you importing via the Media Browser?
    JJ Millen wrote:
    - Yes this has worked before, the problems started either after creating a submix (which I've deleted, without result) and/or after updating to a newer version of Premiere CC;
    Definitely do not update Premiere Pro or OS X when in the middle of a project. Wait until it's complete. If you did either or both of these things, you can cause your project to become corrupt. After your current project is wrapped, test with a brand new project.
    JJ Millen wrote:
    - The only software I run actively besides Premiere is Apple's Mail program, Safari and/or Chrome, sometimes Wire, sometimes Spotify;
    - I currently have no third-part effects or codecs installed in Premiere;
    - I installed the latest CUDA Mac Driver, version 6.5.37 (release date 01/14/2015);
    - The problem just happens while working in my sequence, not in any final output. I don't know what is meant by "previews", but I have the yellow bar indicator in my sequence, if that's info you need.
    I have heard of others having issues with OS X 10.10 and NVIDIA GPUs. My advice is to consider downgrading your OS if you continue to have issues. I believe I have avoided a lot of trouble by sticking to OS X 10.8.5.
    Previews AKA the Media Cache are your "render files." They can become corrupt, so it's a good idea to trash them when troubleshooting. You can locate them via your Preferences > Media. Click the Browse button.
    JJ Millen wrote:
    Okay I went through that menu (which I'm not eager to do, I prefer direct contact) and came across the CUDA setting inside the project settings. I've now enabled the "Mercury Playback Engine GPU Acceleration (CUDA)", which might help.
    So were you set to "Mercury Playback Engine Software Only" or "Mercury Playback Engine GPU Acceleration (OpenCL)" prior to changing it to "Mercury Playback Engine GPU Acceleration (CUDA)?
    JJ Millen wrote:
    Testing with a brand new project is not an option. I have a deadline for my current project and it's impossible to start from scratch. What I did try is start a new project and importing the existing one, which didn't help so far.
    I was just wondering if you experienced the same issues in a new project. Any project you update to a new version is suspect, in my opinion. In the future, try to avoid doing that. If your current project is corrupt, I could see why you are having certain issues.
    For what it's worth, we had another user that exhibited similar issues until they started with a brand new Premiere Pro CC 2014.2 (8.2) file.
    Since importing your 8.1 file to a new 8.2 project isn't working, make sure to triple check permissions on all the Adobe folders I laid out in my blog post: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
    It's the #1 reason Mac users experience freezing and crashing. The other one I'd look at is that NVIDIA drivers are not working well with Yosemite. Finally, if you update a project across versions, it can become corrupt. Not much you can do about that except start a new project ASAP.
    Thanks,
    Kevin

Maybe you are looking for