Premiere pro cc 2014 problems with audio
I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
Anyone else experience the same problems?
Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.
Similar Messages
-
Premiere pro CC (2014) problems with audio on .mts files
Hi,
This is a recent problem I have been having when trying to play certain clips in Premiere Pro CC (2014), I import the entire private folder and some of the clips play as normal and others seem to have skipping audio. This causes the second half of the clip to not have any audio in it at all because it is bunched up at the beginning. I don't even know where to start with trying to fix the problem, the only thing I have done is re import the files and put them in new folders to change the destination it has been imported from.
Any advice would be extremely helpful as it is mostly stopping me from getting on with any work,
Thanks!Hi amber1992,
I will suggest you to go ahead and clean the Media cache and Media cache files folders manually.
MAC OS: Click on Go menu>Go to Folders>type ~/Library and click ok. This will open User Library folder and then navigate to Application Support>Adobe>Common>Media Cache and Media Cache files. Delete all the files from these folders.
Windows: C:\Users\username\AppData\Roaming\Adobe\Common or you can Click on Start button and in search type %appdata% and open Roaming folder>Adobe>Common>Media Cache and Media Cache files.
Once done launch the project again and check.
Regards,
Vinay -
Premiere Pro CS3 Capture Problem with Audio
Setup:
Premiere Pro 3.2.0
Video Capture Device: Blackmagic Design Intensity Pro capture card
Audio Capture Device: HT Omega Claro Plus XP
OS: Windows 7 Ultimate 64-Bit
I am able to capture video with Premiere with no issues. However, the audio does not get captured even though it is set to capture both audio and video. I am configured for ASIO capture and playback. Strange thing is that I can load Adobe Soundbooth and it will capture the audio just fine (from the same input stream as I'm trying to do with Premiere). What gives? I'm almost out of options.
From what I can see, when I hit F5 and go into capture mode, Premiere seems to insist that it must capture audio from the blackmagic design audio ports, and even though I have the audio explicitly setup for the Claro in audio hardware, if I go into the capture settings, it still is set on "Blackmagic Capture" as the capture format, and when I go to settings, I can pick the audio channels to capture, however.... I don't want to capture with the blackmagic for audio. The capture format MUST be "Blackmagic Capture" or else I can't capture the video. It still doesn't make sense though, since I have the audio hardware set for input from the claro ASIO. It shouldn't force Blackmagic audio.
Any ideas? Please helpSome additional information:
Sound card is a Claro Plus XT not XP. Used to typing XP heh
Also, the video capture works with the included blackmagic capture software, as well as freeware solutions like VirtualDub and a Japanese freeware program I use. I'm able to capture video and audio without issue on those. Just don't know why Premiere doesn't do it... -
Adobe premiere pro cc 2014 problem with Yanobox Motype
My premiere pro always freezes when I'm trying to type a title in Yanobox Motype.
Please help me.Locked... duplicate discussion... see GTX 970 and Premiere Pro
-
Adobe Premiere Pro CC 2014 compatible with Nvidia 970 GTX?
Good afternoon.
I'm an owner of a GIGABYTE Nvidia 660 GTX Ti OC 2GB. The card is detected by Adobe Premiere Pro CC 2014 (Even though,i think,it said that it's not listed or something but will work under my own risk..Is there a way to check if it's certified/supported via my own program and NOT the typical "This is the list of supported GPUs"?)
Anyways,i was thinking of buying one of the new 970GTX cards to game on better,but also to make full advantage of it's properties to do much more faster encoding/exporting (you know,create a H.264 MP4 720p@29,97FPS file) than my actual 660GTX card with Adobe Premiere Pro CC 2014.
The thing is,any owner of such card (GIGABYTE,MSI,doesn't matter) have tried to launch Adobe Premiere Pro CC 2014 and export stuff by using the GPU's full potential to make everything faster?.. Because i have this fear of "Getting the newest n greatest Nvidia card so far and in the end see/notice it'll not work with Premiere Pro CC 2014"
....Can somebody please help me with this big fear of mine,please?
Thanks in advance
DVLocked... duplicate discussion... see GTX 970 and Premiere Pro
-
Premiere Pro CC (2014) has ERASED AUDIO from my original media?
I know there are a lot of threads out there about not hearing audio, or missing audio. Maybe this is a related problem, but I didn't find anyone who described the same problem I'm having, or had a solution.
I opened up a project today that I've been working on for a few months, a documentary of sorts, with interviews, b-roll etc. I'm editing with the native footage, which is AVCHD, shot on a Panasonic AF-100. Today, I noticed that two of my interview clips seemed to not playback as I watched it. I wasn't too concerned at first because I know PP can be buggy, but here's all the things I did and how the problem escalated:
- I tried playing it again, to see if it was a fluke... no audio
- I looked at the audio in the timeline... no waveform, just a flatline... no audio.
- I looked at the whole interview's audio waveform... about HALF of it is FLATLINED... like PP had erased or overwritten the audio somehow!
- I restarted PP... no audio. Then I restarted the whole system... no audio.
- I went back to the original clip in the Media Browser to try to re-import it... no audio.
- I opened Prelude to try to look at the original media from different software... no audio.
After a few months of work (and an editing budget of tens of thousands of dollars), I am 4 days away from the delivery date, and PREMIERE IS ERASING MY MEDIA!!!
If this is not solved, I stand to lose more than just this job, but this entire client, my reputation, and my livelihood. ARE YOU LISTENING, ADOBE? This is my career we're talking about. Please help.Thanks for the reply shooternz, to answer your questions...
Any recent updates? eg O.S
- Nope. I'm running OSX 10.9.5 on a 2014 Mac Pro. I've been told to avoid Yosemite at all costs.
Have you checked the source files of the affected clips in another player?
- Other than Prelude, no. One thing I hadn't tried yet was to fire up my old version of Final Cut and see if I could transcode it from there with audio. What other player can read a raw .mts file?
What does the Clip in the Bin and the Source monitor indicate ( Info)
- The icon indicates that there's audio, and when I look at the waveform in the source monitor, it looks like just what I hear... a few minutes of regular audio, then flatline, then some audio again, then flatline.
Have you tried your back up project file?
- No, I didn't want to lose the editing progress I had made today.
Is the audio from camera or from other recorders?
- from the camera
Anything common between the affected clips? eg merge, FX,
- not that I can tell, at least nothing that wouldn't also be true of a dozen other clips which seemed unaffected. no clip effects, etc.
What does the Audio Mixer and Audi Meter show?
- shows nothing (where it is flatlined in the original clip) as I would expect.
AFAIK - There is no way PPRO can "erase" just the audio from your source file. At least not without the editors input.
- That's what I would think too. But even if it's not "technically" possible, it seems to be "effectively" possible because nothing in the creative cloud seemed to be able to read the clip properly. As I mentioned in my post above, it seems to have only been solved by relinking the clip to a .mts file recovered from a back-up of the project from a couple weeks ago. Though, for what it's worth, the file sizes are identical and created/modified dates match as well... so yes, it would appear that the file has not been altered, but regardless, I can't point to it and get the proper audio. -
Premiere Pro CC 2014 Crashing with rendering, freezing system, and more
Hello,
I'm having some serious issues with Premiere pro on my late 2013 iMac.
OSX 10.9.5
3.2GHz Intel Core i5
16GB 1600 MHz DDR3
NVIDIA FeForce GT 755M 1024MB
I'm working in 1920x1080 23.976fps. Media files are from sony FS700 .MTS and Cannon 5DmkIII .mov
Multiple times per day, PP crashes on me. It all started when I was getting really choppy playback which would be accompanied by this error message:
A Low Level Exception has occurred in ImporterMPEG (Importer)
This would soon after lead to the program freezing and me having to force quit the program. After contacting Adobe the first time about this persistent issue, the tech explained to me that it was a "Memory Leak" issue and that there was nothing that could be done. After the support team member ended our chat online before helping me solve my issue, I called support. I provided my case number and this person picked up where the helplessly left me and did the typical Adobe one fix all: He went into the hidden library and cleared all of my preferences, removed any third party plugins, and cleared the files in the root applications Adobe folder, renamed a folder "Adobe.Old" etc.
As I explained to the support team member on the phone, this is not a solution but rather a bandaid until it happens again.
Low and behold it has happened again. This time the support team member had me create a new System Administrator account on my computer thinking that there was a permissions problem with my other account which was conflicting with PPCC2014. While this was a major pain to switch between the new account and any other program that I had set up for day to day work, it allowed me to continue editing and at least (at a less efficient rate) get things done.
Now, while using my new System Administrator account, I am getting terrible crashes that not only stall the program, but force me to hard re-boot my computer. These crashes are accompanied by a terrifying looking screen that I was only able to capture once.
They've only become more intimidating as now I cant even see the program when this happens, but this is the only screen capture that did not turn out completely black.
I'm looking to see if anyone has had any extreme issues like this and if so how they were able to fix it. I've now spent 6+ hours with support and after the last one was told I would receive a personal email follow up by the end of the day (never happened) to take further actions based on the performance after the new account creation.
I need help. Now.
-JohnHi John,
First of all, try this: Re: A low level exception occured in: Importer MPEG (Importer)
Next, make sure that if you updated OS X to 10.9.x, or later, you must check the following each time you update: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
Other things to try:
Sign out from Creative Cloud, restart Premiere Pro, then sign in
Update any GPU drivers
Trash preferences
Delete media cache
Remove plug-ins
Repair permissions
Disconnect any third party hardware
Remove QT components from Mac HD > Library > QuickTime
If you have a CUDA GPU, ensure that the Mercury Playback Engine is set to CUDA, not OpenCL
Disable App Nap
Reboot
Report back if anything here worked for you.
Thanks,
Kevin -
Premiere Pro CC 2014 RAM issues, audio dropouts and export failures
So I've upgraded to PP CC 2014, it worked fine for a while. Then I've noticed that while editing audio starts to dropout (I'm getting PP system message in the low right corner). I tried to dig up some info on the subject, but the only explanation I see that after couple of hours of editing PP eats up nearly all of my RAM.
Any solutions?
My specs:
i7-2600K 3.4 GHz
Quadro 2000
32 GB RAMTake a look at your GPU usage with something like GPU-Z to see if both Premiere versions are using the same amount of MPE GPU hardware acceleration. Actually with CC 2014 it might work faster because Adobe added in more 4k effects/features for GPU acceleration.
You might want to download our Premiere Pro BenchMark (PPBM) and run it on both versions. The H.264 very complex timeline has 4K material in it and usually shows Premiere Pro 8.xxx take about only half the time that Premiere Pro CS6 take to export that same timeline. -
Why can't Adobe Premiere Pro CC 2014 Time remap Audio and Video together?
In case you didn't notice, my question is WHY. I don't know why Premiere Pro can't do this. From what I understand at the moment, the only way to time-remap audio in any way shape or form using Adobe software is through Adobe After Effects, which my computer has absolutely no chance of running ever. I know how to do regular stretching of audio in both Audition and Premiere Pro, but apparently I can't time-remap audio using either of these programs.
So why can't Adobe Premiere Pro time remap audio along with the video? What's the reason that it can't? It's a massive disappointment and would be very impressive to see accomplished in the future. If it's possible to time remap audio and video together in After Effects, that's great and all, except for the fact that I can't use that program. Why can't it be done in Premiere Pro and will it ever be possible in Premiere Pro?
Also, will time remapping audio become possible in Audition someday?That sounds like a great idea. File a Feature Request:
Adobe - Feature Request/Bug Report Form -
Adobe premiere pro cc 2014 freezing with magic bullet looks
Hi-
I'm running windows 8 with this software and I'm getting intermittent crashing when trying to work on any project when I'm also using magic bullet Looks on it. The frustrating thing is that it used to work fine in premiere Pro CC, but using the 2014 version is very unstable. Also, I cannot go back to using the non-2014 version because the file format is incompatible with the older version and I don't have another version saved. I've already done hours and hours of editing in 2014 only to keep having crashes.
Is anyone looking into this or has any recommendations so I can get work done.
Thanks!
-LokI don't use magic bullet Looks but is that a 3rd party plugin?
If yes, have you checked with the vendor to see if it needs to be updated for the new structure of CC 2014?
http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html -
Premiere Pro v4.01 Problem with Mercalli
Prodad Mercalli works normally in PPro v4.00 but now it can't launch in v4.01.
Can any Mercalli users verify this problem please ?>Prodad Mercalli works normally in PPro v4.00
How did you get it to work with 4.0? I couldn't do it and contacted Prodad. They said they are working on it. -
Premiere Pro CC 2014 problems time line
hi
I installed the new version of Premiere, DC 2014. (system win7_64 , i7-3960x, SSD, Nvidia 4000 driver 331.82)
The tim line presents an anomaly (see attached photo)
The playback head and the time marker are not aligned. The deviation is about 5 tenths of a second and increases moving the head from the beginning to the end of the time line window. At the beginning of the window (time-independent) the difference is imperceptible, increases towards the end of the window.
Can you help me, thanks.no one can help me?
I verified that the deviation between the playback head and temporal marker is only in the panel time line and not in the panel control effects. -
Multicam editing in premier pro cc 2014, problem with one camera display size
Although the clip works fine in a sequence all by itself in multicam editing it is much too large and only a portion displays. The other camera is fine. The clips are from different types of cameras 1 is a DSLR, it displays too large, the other is a Sony PD 1570, a pro videocam that uses tape, it displays fine.
Have your tried re-ingesting the media. It's possible the file(s) are corrupt. I run into this on occasion, especially if the results shows up in the render (which is a dead give-away to file corruption) and re-ingesting fixes it.
It's also possible that the drive the file resides on has issues as well. Are you using a raid? We need more information regarding the specs of your machine and process. -
Premiere Pro CC 2014 and Medie Encoder CC 2014 problem
Hello there,
Every time that I am willing to export my project my Premiere Pro CC 2014 stop responding all together. I tried the short cut (Commend+M) or going through the Manu bar. the result is the same, Premiere Pro CC 2014 just freezes and does not respond to anything till I force quit it and restart it allover again. I tried exporting from Premiere Pro it self, without using Media Encoder, but the problem remains the same.
I am using the new Mac Pro. I heard Adobe Premiere Pro is experiencing problems with the New Mac Pro. Is that true? Or is there other issue?
Thank you and looking forward to hear back,
MarufI am having a similar problem.
Premiere Pro CC 2014 suddenly decided to crash every time I export to either Adobe Media Encoder or within Premiere itself.
The encode will usually go for 5-10 minutes before the programs either spits out a "serious error has occurred" window, or it just sits there frozen until I force quit.
I did find a work-around for the moment. If I open AME and FILE > OPEN, select my project and then the sequence I want, AND put it in Software render mode, it will work.
My timeline is 2K, 58 minutes in 23.976
Only effects applied are Lumetri LUTs - no third party.
I've exported as recently as a week ago without issue.
Running OSX 9.5 on an X99 board
3.75 GHz 8-core
64GB 2400 MHz RAM
EVGA Titan Black 6GB
Because I can get my renders out, I am not too concerned. Either there is something wonky with my timeline that screws with any graphics enabled rendering, or there is a bug that is have the same effect. I will try rendering on another of my edit bays that utilizes a GTX 580 that I KNOW works. The Titan is pretty new to my workflow.
Thanks Adobe, for checking this out. -
Premiere Pro CC 2014 imported video length mismatch
I've got a problem in Premiere Pro CC 2014 where the audio and video get out of sync the farther you go into the imported clip. While troubleshooting I noticed that Premiere isn't properly reading the video length of the imported file. Windows reports the right length, as do VLC and Handbrake, but Premiere shows a time about 30 seconds shorter than the real file. I've included the file info from MediaInfo and Premiere here. Windows reports a (correct) length of 1:56:39. This happens on two different Windows computers both running the latest release of Premiere Pro. Has anyone seen this? I've tried to search for similar issues but haven't found anything like this. Thanks!
----- MediaInfo -----
General
Complete name : C:\Users\aprice\Desktop\CI_EOUGame.mp4
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 3.22 GiB
Duration : 1h 56mn
Overall bit rate : 3 954 Kbps
Encoded date : UTC 2015-01-10 02:38:58
Tagged date : UTC 2015-01-10 04:35:38
Writing library : Apple QuickTime
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 1h 56mn
Bit rate : 3 756 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Frame rate : 29.871 fps
Minimum frame rate : 7.500 fps
Maximum frame rate : 30.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.061
Stream size : 3.06 GiB (95%)
Language : English
Encoded date : UTC 2015-01-10 02:38:58
Tagged date : UTC 2015-01-10 04:35:38
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 1h 56mn
Source duration : 1h 56mn
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 160 MiB (5%)
Source stream size : 160 MiB (5%)
Language : English
Encoded date : UTC 2015-01-10 02:38:58
Tagged date : UTC 2015-01-10 04:35:38
----- End MediaInfo -----
----- Premiere -----
File Path: C:\Users\aprice\Desktop\CI_EOUGame.mp4
Type: MPEG Movie
File Size: 3.2 GB
Image Size: 1920 x 1080
Frame Rate: 29.97
Source Audio Format: 44100 Hz - compressed - Stereo
Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
Total Duration: 01:56:09:09
Pixel Aspect Ratio: 1.0
----- End Premiere -----Thanks Ann. I noticed that in the MediaInfo output and thought it was strange, since I don't typically deal in variable frame rate footage. After converting it to constant frame rate with Handbrake the problem appears to have been resolved. I'm working to find out if the program that records the video can be switched to constant frame rate mode to fix this issue permanently. Thanks for the help!
Maybe you are looking for
-
Can't change permission on Time Capsule files and folders
I am using my Time Capsule as a storage device that everyone on my network can access, and I also have a fairly small (~5000 songs) iTunes Library as well. This was all working fine, until I decided to try to get a second computer, beside my MacBook
-
Hey all, I bought a MacBook exactly a week ago, so for I love it. during my decision process I was leaning towards the MacBook Pro but I could not justify the $2,000+ price tag. But I am happy with my decision in favor of portability ()as a college s
-
Two 23" displayed hooked on same G5 give different colours
I have just bought a new G5 and hooked my 23" HD Cinema display to it. I used to use it with my Powerbook, and I missed the spanning feature, so I decided to get a second one which was delivered and installed yesterday. Immediately I noticed a differ
-
Asynch controls not executing in parallel
Can a control or JPD have more then one thread running thru it at a time? The workshop docs states controls can be asynch but test seem to indicate that asynch controls do not really run in parallel. They seem to be serialized (I think). The only exc
-
CSS opacity: background opaque, but content not..help
Dear all, It's been a while but I have something I just can't figure out .. what I'm after...I want the background of the main container to be 60% opaque, but the actual content divs not ... can anybody help me with this Thanks #mainWrapper { wid