Premiere Pro cc 2014 Proress can't export

I've been tried few times to export In Apple Pro Ress 422Hq, But everytime premiere crash or block, anyway doesnt export
any suggest
thnks manu

Hi Manu,
Can we get more info please? FAQ: What information should I provide when asking a question on this forum?
Thanks,
Kevin

Similar Messages

How can I un-install my adobe premiere Pro CC 2014, I can not do this in the normal way because this program is not in the UN-INSTALL list?

How can I un-install my adobe premiere Pro CC 2014, I can not do this in the normal way because this program is not in the UN-INSTALL list?

http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

Premiere Pro CC 2014 Crashes During Media Export

Hi, I have diligently applied several of the fixes listed here:
Re: Premiere Pro CC 2014 freezes frequently and crashes
However, Premiere Pro CC crashes at about 10% of the video export -- it gets through the audio stuff as far as i can see.

yeah, checked out the article.
my computer is not shutting down. premiere is crashing. the media exporter is crashing.
it gets through the audio then it crashes during the video processing.
i even tried to hit pause every 2 seconds.
a test exports fine from premiere 6.0, but i am concerned that 6.0 might crash if i rebuild the whole project.
hmm i have an idea.
obviously i would much rather the software worked.

After upgrading to Premiere Pro CC 2014, I can't change the render preview location

Ever since I downloaded Premiere Pro CC 2014, I cannot re-route my render preview files. I have two internal hard drives and I need the files to go to my secondary one. With CC, it did this just fine, but since I've upgraded to 2014, it will not do it. I've set it the same way I did before in Preferences/Media, then set the Media Cache Files and Media Cache Database to the new hard drive. It's eating all my hard drive space and I cannot render or export a large sequence. Is there a trick to this I'm missing that has changed?

Thanks Neil! I'm actually wondering how to change where the preview files go. I've attached two screen grabs. Right now my media cache is going to my SATA drive (my smaller of my two internal hard drives and the drive where Premiere Pro is located.) I want to re-route my render files to go to my Macintosh HD drive which is much larger and gives me more breathing room. I could do that before but since I've upgraded to 2014, even though I have it set in preferences, it STILL goes to my SATA drive. So annoying! I'm wondering if I'm doing something wrong or if it's a bug. I'm still running Mountain Lion (getting ready to finally upgrade, I've just been needing to backup my computer), could this be the reason? Any ideas? Thanks so much for the help!

Premiere Pro CC 2014 and AME using only 25% of CPU

Hello all,
I've been having this problem with Premiere PRO CC 2014 and that when exporting it uses only 25% of my CPU thus taking 4 times longer than CS6 to export the same file project. I read a couple of forums with people having the same problems, I tired disabling CPU parking, disabling "Import sequences natively" in AME but no result.
Quick PC specs:
i5 4670
16GB of RAM
GeForce GTX 760 4GB DDR5
Everything for Adobe including the video files in use are of Samsung's SSD drives. Using CUDA as the render engine.
Currently one hour and 4 minutes clip in 4k takes about 52 hours to encode in Premiere CC 2014 and 9hr to encode the same project in CS6. Any ideas?

Take a look at your GPU usage with something like GPU-Z to see if both Premiere versions are using the same amount of MPE GPU hardware acceleration. Actually with CC 2014 it might work faster because Adobe added in more 4k effects/features for GPU acceleration.
You might want to download our Premiere Pro BenchMark (PPBM) and run it on both versions. The H.264 very complex timeline has 4K material in it and usually shows Premiere Pro 8.xxx take about only half the time that Premiere Pro CS6 take to export that same timeline.

Exporting comp from After Effects CC to Adobe Premiere Pro CC (2014) gives error message: "AE can not connect to dynamic link"

I am trying to export an AE CC comp into a Adobe Premiere Pro CC (2014) video project. I can not drage it from AE to Premier Pro. Is there a problem with the dynamic link between these two applications?

Dynamic Link only works between After Effects and Premiere Pro if the applications are of the same version---i.e., both CC 2014 versions.

Can't export clips or sequences to Audition from Premiere Pro cc 2014.2

I can't get audio tracks or anything to export to audition. If I right click on them the option is grayed out and if I go to the clip menu and select "edit in adobe audition" the "clip" is grayed out and if I choose sequence it opens a dialog box that will not let me click the box "open in adobe audition".
I am watching a how to video but my program will not function as shown in video.

I uninstalled Audition and reinstalled it. I read that it should be installed after premier pro cc. That restored the grayed out links. good, but now other problem.
Now the new issue is the export to premiere from Audition is greyed out.
I will try and get this make sense...
I installed premiere cs6 two days ago to get Encore for dvd burning and menus. After the uninstall/reinstall of audition just now I ran a check on the link and got stuff from premiere cc 2014 to launch into audition, but when I checked how to send it back to premiere pro cc 2014 when I went to export to premiere (and was able to check the open in Premiere box) it launched cs6, but I want it to go to my premiere cc 2014
So I uninstalled cs6 only leaving encore, now the box to send it to premiere is unable to be checked.
I tried another fresh install of audition, but the box is still unable to be checked.
I need help - been up all night and having a rough time here.

Exporting to Media Encoder crashes Premiere Pro CC 2014

Greetings,
I am experiencing a problem with premiere off and on. Right now it is an on problem. When I am exporting from Premiere Pro CC (and CC 2014) it will intermittently crash Premiere. I have tried this with several different audio and video formats (AVI [Lagarith and uncompressed], WAV, H.264, MPG2, AAC, etc). At the moment, every time I go to export to queue it locks up and hangs on the "Preparing data for export..." Media Encoder Launches and then it just freezes. I get "Problem Even Name: AppHangB1" over and over. Sometimes a full restart will fix this temporarily and sometimes it goes away for a long while. I managed to get a few sequences exported and then it just kept freezing on every PP CC restart.
Here are my system specs:
Premiere Pro CC (up to date)
Win 7 64bit (up to date)
i7 970
24GB Ram
NVIDIA 470GTX (driver up to date)
3 x 1.5TB internal
4TB internal
3TB internal
12TB RAID 5 via USB 3.0
USB 2.0 and 3.0 drives
FireWire audio device (M-AUDIO FireWire1814)... although, I am not using it for playback. It is connected.
Footage is from C100 H.264 .MTS, H.264.mov from 7D, and H.264 .MOV from iPhone.
All stock video plugins with a few third party audio plugs.
This problem happens with and without third party plugs, but it happens that this project uses them.
I have chatted with Adobe help twice about the matter and nothing has come of it. Log out, log in = same. Restart = same (sometimes), create new user account = same, and so on. The only thing I haven't done is completely re-install premiere, which seems a bit overkill. One of the reps said he would get back to me in a few days after he watched the issue via screen share. Never heard back.
I get the sense that this has something to do with PProHeadless.exe not launching or not running properly. When the crash happens on a fresh restart of PP CC 2014 PProHeadless is not running. I can start PProHeadless and it will send sequence to media encoder. When I try to export another sequence from the same project it crashes and I see another instance of PProHeadless launched.
Also, once the projects are exported to Media Encoder, I can encode them to any format with no problem. The problem is getting the sequences there!
Is there anything that I am overlooking here?
Thanks for the help!

Hi
Premiere pro cc 2014 8.0.1 (21) build
Encoder CC 2014 8.0.1.48
I use CC for Teams so it updates all the time.
Again when I tried to use it today by letting premiere open it by sending an output into Queue it crashed both Encoder and Premiere.
In order to shut down Encoder and Premiere I had to go into Task Manager and "End Process Tree" on everything adobe I could find because just ending Encoder did not work it would not close. I remembered that years ago when Premiere would crash we had to end a photoshop process. I found photoshop open even though it was not "alive" on my task bar. I had used it yesterday but had closed it. I also had to close dynamiclinkmanager.exe *32 as well as one of the three Adobe CDF Helper.exe*32. They popped back on but Encode closed and then I got a message that Premiere needed to close and did when I clicked the button to let it close.
After all this I re-opened Encoder by itself and checked the Preferences finding that Import Sequences Natively option was again checked.
By the way for me, "Launch AME manually, then drag the sequence from PPro's Project panel to AME's Queue (or to a preset in the Preset Browser). That uses a different code path than the File>Export>Media workflow." won't work most of the time because I do live events of panel interviews that may run 2 or more hours. I need to break them down to chapters for the web
Also I know this isn't part of this problem but I and many others would still love dynamiclink to work to Encore because the DVD is not dead yet. The current work path is a drag.
Looks like some programers and engineers have some work to do.
Thanks
Dennis
My computer:
Self built PC windows 7 Professional 64 bit Build 7601 SP 1 I use auto update so it is up to date.
ASUS P6x58D Premium Motherboard
Intel (R) Core i7 930 @ 2.80 Ghz
Installed Memory 12 GB
NVIDIA GeForce 9500 GT
NVIDIA GeForce GTX 580
2 Apple Monitors and a HP full HD Monitor
With a BlackMagic Intensity Pro Capture Card

I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages fra

I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages frame rates are 29.97 and i have set timeline to 25 FPS is requirement by client. kindly revert. Thanks

Thanks Richarad ..It has solved the problem but still crashes some times .As the programme has the break (bumper)after every five minutes ,i hope it will not compress bumper time too after export.

Dramatically slower encode/render times from Premiere Pro CC 2014 via both AME 2014 and direct export via PP

My recent update to Adobe CC 2014 apps has been an unmitigated disaster. Was running the 2013 version until last week and everything was just dandy. Very good performance and excellent render/encode times even for stuff with lots of filters and fx.
Since update 1-2 min videos with no fx or filters (or even transitions) have gone from exporting in under two minutes to well over 25 minutes. These exports are with the same presets I regularly use (Vimeo 720HD H.264).
I've been poking around the forums here for two days looking for answers and can't find anything that works. Tried the whole "App Nap" toggle as well as a few other tips. Didn't do squat. Looking for any hints/answers. Thanks.
Mac Pro Mid 2012
2 x 2.4 GHz 6-Core Intel Xeon
32 GB 1333 MHz DDR3 ECC
ATI Radeon HD 5870 1024 MB
OS X 10.9.5 (13F34)
System SSD 500GB
Cache SSD 500GB
Media HD 1TB

Hi MXSw,
MXSw wrote:
All right. More experimentation has been done. Seems like the renaming of Adobe folders fix prescribed in the link below might have helped a bit.
Premiere Pro CC 2014 renders are painfully slow.
You can rename folders, but I prefer to do it this way: Premiere Pro CC freezing on startup or crashing while working (Mac OS X 10.9, and later)
MXSw wrote:
Kicked out a 1 minute edit with some color/fx in under 10 minutes. Not as fast as in the past but at least the CPU seemed to be cranking at 500% and above per Activity Monitor. Its barely gone over 250% in previous attempts.
That sounds a lot better.
MXSw wrote:
Same 1 minute edit took 35 minutes however when I exported from a PP timeline using MXF clips instead of QTs. I assumed the QTs would speed up the process but in the past I've gotten great performance on big old RED raw files so still a bit of mystery why I can't approach the speeds I had prior to most recent CC update.
Maybe updating your project file has something to do with it. I'll keep my eye on this issue. Thanks for reporting.
Regards,
Kevin

Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

OK, so you want to put it on your own web page. That's fine as long as you know how to create a web page.
The next thing you have to decide is how big do you want the video to appear on the web page. Many people just post on YouTube and then embed the video into their web page. That way, the video can take advantage of all of the various sizes that YouTube provides.
In any case, I suggest that you use H.264. But the data rate depends on the size of the file. If you are going to display it in HD, then you probably want to start at about 20Mb/s and go up or down from there. The required data rate depends on what you find acceptable, and that depends on the amount of movement in the video. For example, a talking head next to a white board explaining something requires a lot less bits to represent the image because less changes are taking place from frame to frame. If you use 10Mb/s for that, you might find 20Mb/s or more is required to make you happy if you shot a football game from the sidelines.
I generally use settings that look like this image. If you have any questions as to why I choose these settings, feel free to ask.

Can't Move Audio Clips in Timeline After Expanding to View Waveforms (Premiere Pro CC 2014.2)

So, this seems to be a bit of a weird one, and I'd be pretty stoked if it ended up being something silly that I'm doing wrong, but I can't for the life of me figure out what that might be.
As the title suggests, I can't use the mouse to move some audio clips in a timeline once I expand the track to view the waveforms. This appears to only happen with independent audio clips (WAV. AIFF, MP3, etc), and not with clips attached to video. Also, it's worth noting that I don't have track keyframes turned on. I was hoping that was it, but it wasn't.
So, what happens is this:
1) I drag an audio clip down to the timeline (I can drag it onto an existing track, or drag to the bottom of the sequence and create a new track. Neither option seems to get a different result.).
2) So long as the track isn't expanded and the waveform isn't visible, I can move the clip left, right, or up and down to a different track.
3) As soon as I expand the track to view the waveform this functionality goes out the window. When this issue happens I can use the keyboard to nudge left and right, but that's about all the movement I have.
4) It's almost as though the track becomes corrupt. The lanes for the track don't redraw properly, and the track is pretty much unusable. I can't put anything into it, and I can't take anything out. All I can do is delete the track and start again.
Complicating issues is that this doesn't always happen, but instead is one of those "vast majority of the time" issues. I can't see any rhyme or reason for why it works or doesn't. I seem to do the exact same thing, but occasionally get different results. It doesn't matter what type of file I'm using (WAV, AIFF, etc), and this only happens with independent audio clips.
Once again, I don't have track keyframing turned on when this happens. Believe me, I wish that was it.
I have already filed a couple of bug reports about this over the last month or so, but haven't heard anything yet. I was wondering if anyone else was having the same issue, and if so, whether they had any workarounds.
Mandatory system info:
Windows 7 Professional SP1 (64-Bit)
Intel i7-3820
32GB RAM
Nvidia GTX 980 (350.12)
Premiere Pro CC 2014.2

Update:
I was just looking to post a screenshot of the timeline when I discovered something interesting. As soon as I use the vertical scroll bar to the right of the sequence, the tracks start to work again. Close off the waveform and the clip goes haywire. Move the scroll bar a tiny bit (or a lot), and suddenly the clip starts working.
Pretty bizarre.
The good news is that for the time being that could be a workaround, though it would be great for this to not happen at all.

I'm having problem with exporting video from premiere pro cc 2014

I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
When I click Export and media, the window for exporting appears and it starts exporting video.
But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
It literally says it has a problem with compiling, but I don't know what the real problem is.
I tried many things like restarting computer and Premire Pro but it's no use.
But it works when I use Adobe Media Encoder CC 2014 for exporting video.
If anyone knows any possibilities about why this problem happens, please let me know.

I'm having a similar issue. When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render. Randomly, at some point in the process, the render just stops and the ETA just keeps climbing. I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it. Even a clean re-install of CC 2014 doesn't work.

Help! I have an Adobe Premiere Pro CC 2014 sequence @ 59.94 fps and need to export the video as 23.976 but the video looks glitchy! Please Help!

Help! I have an Adobe Premiere Pro CC 2014 sequence @ 59.94 fps and need to export the video as 23.976 but the final video render looks glitchy! Please Help!
I made a new sequence at 23.976 and imported my 1280x720 59.94 video into the sequence... when i rendered it out it looks glitchy!
my client is not allowing 1280 x720 59.94 video files they want 29.97 progressive,25,24,or 23.98
Please Help what do i do! where did i go wrong! this is horrible omg!!!! please help!
Thank you!

Nice!
In my export setting i switched the frame rate to 29.97 and it looks good to me!
Thank you!

Exporting from Premiere Pro CC 2014

Hello there,
Every time that I am willing to export my project my Premiere Pro CC 2014 stop responding all together. I tried the short cut (Commend+M) or going through the Manu bar. the result is the same, Premiere Pro CC 2014 just freezes and does not respond to anything till I force quit it and restart it allover again. I tried exporting from Premiere Pro it self, without using Media Encoder, but the problem remains the same.
I am using the new Mac Pro. I heard Adobe Premiere Pro is experiencing problems with the New Mac Pro. Is that true? Or is there other issue?
Thank you and looking forward to hear back,
Maruf

Hi Maruf,
Maruf Noyoft wrote:
Kevin,
I reset as you suggested and it took care of it.
Great!
Maruf Noyoft wrote:
So, if you don't mind explaining me the cause of the problem that I had? Or
an article about it. It is just for me for getting to know better the program and the system.
Thank you very much and appreciate your help enormously.
Since preference files get touched by the application frequently, there is always the possibility of their corruption. When this happens, you start to see what we call "unexpected behaviors" from Premiere Pro. This problem happens infrequently, but it is a good first troubleshooting step to try on your own. This is the case with most every non-linear editing application I have used over the years (Final Cut Pro, Avid, Media 100, etc.).
Thanks,
Kevin

Premiere Pro cc 2014 Proress can't export

Similar Messages

Maybe you are looking for