Premiere Pro CC 2014 Sequence Running Very Slow

Hello,
I am working on a documentary project with over 500 hours of HD footage, and over 20,000 assets (according to PPro’s media loading indicator). The main file format is MXF (~50 Mbps), with some H.264, GoPro, and iPhone thrown in.
My assistant is in the process of transcoding everything to ProRes 422 Proxy (~28 Mbps) 1920x1080, with the intent to upres to ProRes HQ once picture is locked. So footage is continually being off-lined and relinked as ProRes while I'm in this initial editing phase.
I have only been editing for about a month, but it has been a smooth experience until about a week ago after I updated to CC 2014, turned Peak File Generation on, and my main sequence started getting over 30 minutes long. There are no added filters. It’s just basic footage and cuts.
Now as soon as I start my project, it lags several seconds when I click in the timeline or press play - just any timeline action really. But it’s not consistent. It’s slow about 75% of the time. Sometimes it will be going fast, then when I quickly make multiple keystrokes it becomes a snail.
When I’m in a smaller sequence of under 5 minutes, or just in the Project Panel, it runs much smoother, but is beginning to lag more often. And in the 30+ min sequence, it is slower when zoomed out than when zoomed in. But just the zooming in process is laggy.
This is the main issue I’m having, and I’m concerned it will continue to get worse as the final project will be around 2 hours long, with a likely 4+ hour initial assembly. I'll eventually split it up into 10-20 minute reels, but am not at that stage yet. I'm aware this could be either a software issue on Adobe's part or workflow issue on my part. So any feedback is welcome.
Here’s the fixes I’ve attempted so far:
1) Cleaned the Media Cache Database, and have the Media Cache saving to a secondary internal HDD.
2) Changed the Program preview from Full to 1/4 quality.
3) Turned off Automatic Peak File Generation, but most clips already have them generated.
4) In ‘Sequence Settings,’ turned off ‘Composite in Linear Color’ (since it requires GPU acceleration or max render quality.)
5) Removed all the plug-ins (which are mostly Red Giant) from the MediaCore folder.
6) Uninstalled CS6 programs, still have CC installed.
6) Exported an XML, and re-imported into a fresh, new CC 2014 project and a CC (7.2.2) project.
7) Reinstalled CC 2014.
8) In Sequence Settings, changed Preview File Format from I-Frame Only MPEG to Apple ProRes 422 (Proxy)
Same results throughout.
Workstation Specs:
Mac Pro 2012, OS 10.9
2.4 GHz Quad-Core Intel Xeon
24 GB Ram (18 dedicated to PPro)
NVIDIA GeForce GT 640 Graphics card for dual monitors
NVIDIA Quadro 4000 for Cuda GPU Processing
Storage Specs:
480 GB SSD for Startup & OS
External 56 TB SAS RAID for media & project files
Thanks in advance!
Kenny Miracle

Hi Kenny - i know your thread is from last year - but we just hopped on this board looking for answers to the exact same issues you described in your post. Unfortunately i can't see that you found an answer on here. Did you resolve your issues? And if so, can you please either let us know or shoot us an email? [email protected]
many thanks

Similar Messages

Help! I have an Adobe Premiere Pro CC 2014 sequence @ 59.94 fps and need to export the video as 23.976 but the video looks glitchy! Please Help!

Help! I have an Adobe Premiere Pro CC 2014 sequence @ 59.94 fps and need to export the video as 23.976 but the final video render looks glitchy! Please Help!
I made a new sequence at 23.976 and imported my 1280x720 59.94 video into the sequence... when i rendered it out it looks glitchy!
my client is not allowing 1280 x720 59.94 video files they want 29.97 progressive,25,24,or 23.98
Please Help what do i do! where did i go wrong! this is horrible omg!!!! please help!
Thank you!

Nice!
In my export setting i switched the frame rate to 29.97 and it looks good to me!
Thank you!

My MacBook Pro just started to run very slow, what can I do to fix it?

My MacBook Pro just started to run very slow, what can I do to fix it?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Otherwise, take the steps below when you notice the slowdown.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Premiere Pro CC 2014 renders are painfully slow.

Running CC 2014 on a brand new iMac: 3.5 GHz Intel Core i7, 32 GB RAM, NVIDIA GeForce GTX 780M 4096 MB.
I have a 2.5 minute timeline with many dynamic link clips back to simple After Effects CC 2014 comps. Rendering in this timeline is MIND-BOGGLINGLY slow.
Video Rendering and Playback Renderer is set to Mercury Playback Engine GPU Accelerated (CUDA)
And in Preferences > Memory> I have optimized rendering for "Performance".
My Sequence is using Apple Pro Res 422 as my video preview codec with Maximum Bit Depth and Render Quality selected.
Renders should be screaming.
Is anyone else experiencing this? Have I done something stupid in my set up?

Hi Kevin. Thanks for response. Yes, acceleration is enabled. Not CUDA as I'm running on a ATI Radeon HD 5870. See screenshot below.
Also have a thread specific to my issue here: Dramatically slower encode/render times from Premiere Pro CC 2014 via both AME 2014 and direct export via PP
If you get a chance to look through it, I'd appreciate it very much.
Thanks!
Martin

How can I check my Mac book pro as it is running very slow

My mac book pro has just sterted to run very slow indeed. I noticed it after I registered to use Knowhow cloud.
I wondered if anyone else has had a simular problem, and if you can help me.
Many thanks

Lisadawson11 wrote:
My mac book pro has just sterted to run very slow indeed. I noticed it after I registered to use Knowhow cloud.
Well it depends what you have backed up to their cloud service.
If it's a lot, it's going to take a long time to upload all your stuff as Internet Service Providers restrict upload speeds to a fraction of their download speeds.
Cloud backups is bad, the data can be snooped on without a warrant, it can be lost and it's slow as heck unless it's only a small amount.
If you don't know what your doing, then disconnect from the Internet and uninstall their software, use a external drive you can get from any computer or office store and connect it to the Mac, when TimeMachine pops up and asks, say yes and let it work overnight to create your first backup (takes the longest)
Forget the Cloud, it's a joke.

Mac os x lion 10.7 on mac book pro not updating and running very slow

i am using mac os x lion 10.7
problem it is not updating and running very slow. How to improve?

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help to identify which such modifications you've installed, as well as some other aspects of the state of the system that may be pertinent.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: You copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, proceed anyway.
Below are instructions to run a UNIX shell script. It does nothing but produce human-readable output. However, you need to be cautious about running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The script will line-wrap or scroll in your browser, but it's really a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user, and the affected user is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The administrator is the user that is created automatically on a new computer when you start it for the first time. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Triple-click anywhere in the line of text below on this page to select it:
clear; PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && o=$(sed 's/^/ /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; a=$(id | grep -w '80(admin)'); [[ "$a" ]] && sudo true && r=1 || r=; { [[ "$a" ]] || echo $'No admin access\n'; [[ "$a" && ! "$r" ]] && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); PN "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage" && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); PR "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {/,}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; [ "$r" ] && { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; }; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; exit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter your password, the script will run anyway, but it will produce less information. In most cases, the difference is not important, so don't worry about it.
The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "[Process completed]" to appear in the Terminal window.
You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again.
Please note:
☞ This procedure is all copy-and-paste — type nothing in the Terminal window except your login password if and when prompted.
☞ Remember to post the output. It's already in the Clipboard when you see "[Process completed]" in the Terminal window. You don't have to copy the output; just paste into your web browser.
☞ If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary.

Premiere Pro CC locking up and very slow to load bigger projects

I am having a problem with premirepro cc locking up and very slow to load bigger projects.
Windows 8 machine

I am having the EXACT same issue and now we are WAY behind deadlines. We have Adobe for Teams on 3 computers, all are HPZ820, Dual Proc with Intel(R) Xeon(R) CPU E5-2650 @ 2.00GHz, 32 GB RAM, Dual Video Cards Quadro 6000 4GB, Windows 7 64 bit with all the latest patches. Everything worked on the first release of 2014 but last week there was an "update" to Premiere. Since this update, projects work for a short period. When you start a new project and add footage, you can scrub the footage and play the footage with no issue. But the more assets you add, simple Titles, it slowly starts to fail. Playing the timeline starts and stops and then finally the end result is you can't even play the timeline. The Program window is frozen. I have even tested starting a new project, adding assets one by one but no matter what, I get the same results.

Sequence run VERY slow with SeqEdit.exe

Hi, My application sequence began to work very very slow while running under SeqEditor
Looking in the Windows Task Manager, it shows 50% constantly!!
Even steps like 'Lable' takes a longs time to execute.
Under Operator Interface it works just fine.
I have loaded some example sequence files from TestSTand/Example directory and they run just fine.
It seems that the problem is only with this specific file.
I can not use the SeqEditor as it is....PLEASE HELP!!!
Thanks
Rafi

Sequence run fine with Operating Interface (as I pointed out in the first message).
Attached is the sequence file.
Thanks
Rafi
Attachments:
AoC.seq ‏3391 KB

My Macbook Pro Retina 2012 is running very slow and gives me frequent speed problems.

So, I've noticed it happen gradually for about a year now. It started with just minor but not significant delays in opening up programs, but I didn't mind it because the computer was still fast compared to a PC, which is what I used to use before this Macbook. I got this macbook in 2012, and luckily I still have a warranty, but it'll close soon.
Right now, some problems include:
1)
2) Shutting down and turning on the computer is slow (sorry no picture on this one). When I first bought this mac, and until about a year ago, whenever I turn it on/off it would do it instantly. But now, there is a bit of a delay when turning off. The screen seems to just freeze at a certain frame, stays that way for a few seconds (longer when turning it off right after playing a game or two-- don't worry they're compatible with Mac OS), and then shuts off. And when it's frozen at that frame time, you can still see the background materials because they're only faded away. You know what I'm talking about-- Macbook turns out when turning off and then shuts down. So, much of the screen is white, but you can still see the screen prior to the shut down faded.
3) Internet is running extremely slow. When I check my speed at speedtest.net, I get around 47 mbps on bad days and 53-ish on good days (download speed)
EtreCheck results are here:
EtreCheck version: 2.1.8 (121)
Report generated March 24, 2015 at 7:13:26 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (Retina, Mid 2012) (Verified)
    MacBook Pro - model: MacBookPro10,1
    1 2.3 GHz Intel Core i7 CPU: 4-core
    8 GB RAM Not upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 411
Video Information: ℹ️
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M - VRAM: 1024 MB
        Color LCD spdisplays_2880x1800Retina
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 10:53:8
Disk Information: ℹ️
    APPLE SSD SM256E disk0 : (251 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Boot OS X (disk0s3) <not mounted> : 650 MB
        Moon Cheol (disk1) / : 249.80 GB (67.32 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Logitech Lenovo USB Optical Mouse
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Parallels Desktop.app
    [not loaded]    com.parallels.kext.hypervisor (10.1.0 28600 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.netbridge (10.1.0 28600 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.usbconnect (10.1.0 28600 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.vnic (10.1.0 28600 - SDK 10.7) [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.nero.HSMMonitor.plist [Click for support]
    [failed]    com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
    Steam    UNKNOWN (missing value)
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.235 - SDK 10.6 Outdated! Update
    QuickTime Plugin: Version: 7.7.3
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
    Open in Internet Explorer
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        22%    WindowServer
         3%    quicklookd
         2%    Dock
         2%    hidd
         1%    Google Chrome
Top Processes by Memory: ℹ️
    455 MB    softwareupdated
    258 MB    Google Chrome
    151 MB    Google Chrome Helper
    137 MB    WindowServer
    77 MB    Finder
Virtual Memory Information: ℹ️
    3.39 GB    Free RAM
    3.24 GB    Active RAM
    848 MB    Inactive RAM
    1.11 GB    Wired RAM
    13.63 GB    Page-ins
    61 KB    Page-outs
Diagnostics Information: ℹ️
    Mar 24, 2015, 06:32:54 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/UserKernel_2015-03-24-063254_[ redacted].crash
    Mar 23, 2015, 08:20:04 PM    Self test - passed
    Mar 23, 2015, 04:35:14 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/UserKernel_2015-03-23-043514_[ redacted].crash
    Mar 22, 2015, 08:38:53 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/UserKernel_2015-03-22-203853_[ redacted].crash
    Mar 22, 2015, 03:00:50 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/UserKernel_2015-03-22-030050_[ redacted].crash
    Mar 21, 2015, 03:34:12 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/UserKernel_2015-03-21-153412_[ redacted].crash
Resetting computer to factory conditions doesn't work, time-machine didn't work, and clearing more storage space didn't work either. I would like to get this problem fixed before my warranty runs out. Thanks for reading and any sort of help will be appreciated!

Do you know of any specific tasks or situations that cause it to perform poorly? If so, make a note of those and demonstrate them for Apple. Do NOT, under any circumstances, restart the machine. You want it at its worst when you take it in. If you try to do any of those magic resets, it may just reset things just long enough for Apple to proclaim it healthy. If Apple does that anyway, then there are plenty of opportunities to try those things later after your warranty has expired.
I wish I knew exactly when it does this, but it doesn't always happen. It sometimes does, and sometimes doesn't. I thought about this, too. But the problem is that it's really hard to catch a time or figure out what causes these symptoms to occur. I haven't taken it to Apple because I thought it'll just be a waste of time because they'll probably say that it's healthy so they don't have to put any money/effort to try and fix it...

Premiere Pro down load on Mavericks very slow. Anything wrong or should I wait?

I got CC. I'm trying to download Premiere Pro and after 14 hours it's only 30% downloaded. I have slow broadband but is this a problem? Am I hung up somehow. Using a new macbook pro with Mavericks. Are there other things I need on the computer for download to proceed? Thanks.
Conrad

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Premiere pro cc 2014 new update terribly slow, previous versions available?

recently updated to the newest version of premiere pro in the middle of a project. ( silly, i know) been experiencing so many problems. specifically lag in the program and rendering previews. ive searched all over threads and google for what could be causing the problem to no avail. also have tried uninstalling, cleaner tool, reinstalling. tried changing permissions. at this point i just want to revert back to CC or at least 8.01 but i cannot find any links or a way to return to a previous version of premiere. any help?
Im using a mac book pro with osx Yosemite
dual core 2.2 250gb ssd boot and 750gb 7200 rpm internal
not the beefiest system by any means but it was workable, up until recently.
im at my wits end with this.

Install a previous version of any Creative Cloud application

MacBook Pro, MacBook Pro2,1 Running Very Slow Under Mavericks

I have been having extreme slowness issues with lots of SBOD spinning delays since upgrading my older MacBook Pro to Mavericks last month. It takes forever to "see" and run a back-up on my G Drive Time Machie drive, which has been historically very speedy and reliable. It should not take 5 hours to back up to the daily Time Machine drive, which at most took 20 minutes, maybe 30 if I installed new OS X software upgrades or updates. Sometimes when I run my third party software (much of it from MicroSoft Office, FileMaker, and the second to latest Adobe Master Collection Suite), I get more SBODs and some hiccuping until the software/document boots up. As recently as Mountain Lion, this was never an issue before, normal things that just ran seemlessly without thinking. Very occasionally even when shutting down, the finder loses track of what it is doing. When I do the Force Quit thing because third party software or the Finder Launcher has become "not resposive," even this can take a long time. I am wondering if this has to do with Mavericks bug/feature of rationing out unused memory, which my memory chips may not like on my bottom of the compatibility bracket machine spectrum. Is there perhaps a need for a more up to date firmware version for my model?
I have tried all available software testing options, and I found nothing that seemed amiss in the software end at all. I cannot access anything like Apple Hardware Test to assess and hardware problems either via my proprietary Mavericks-installed bootable OS X and Utilities partition or via the Apple Support Site to see if a dying hard drive is the culprit.
FYI About this Mac, which Apple's Support Site swears will work with Mavericks.
Model: MacBook Pro, MacBook Pro3,1 (late 2007 - early 2008) (17", 2.6 GHz)(Built as an online order, to my specifications)
Processor: Intel Core 2 Duo
Hard Drive: 250 GB (SATA Disk) (64.83 MB Available To Me, Remainder Taken Up By Apple OS X proprietary partition)
Graphics Card: NVIDIA GeForce 8600M GT 256 MB
Built-In Display: 17" (1920 x 1200)
Memory: 4 GB 667 MHrz DDR2 SDRAM (2 Banks of 2 MB each) (Full complement)
L2 Cache: 4 MB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
Hardware UUID: 00000000-0000-1000-8000-001EC2127516
SMC Hardware Version: 1.18ƒ5
Current Version of Mavericks: OS X 10.9.2, Original Installed Version: Mavericks OS X 10.9.0 (13C64)
When I installed the new system software from the App Store, I did remember to disable my Norton Security Suite, so the download and installation should have been clean and unimpeded. There were no reported problems with the installation or the upgrade process. I chose the option at original installation to upgrade my laptop using the "migrate from my latest Time Machine Backup feature" to preserve the third party applications and settings.
My Firmware was all up to date, according to the Apple Support Page articles relating to my model. All permissions checked out OK as did all verification tests on the Mountain Lion Apple Partition (the one accessed via restarting with Command-R) before I started.
Since Apple has not been willing to release its system core software to the third- party makers of my Optimizing software (Disk Warrior, Alsoft), I have not been able to optimize the contents of my hard drive since the version that came out with Lion OS X 10.7; this may be a possible source of my problem. If my files are badly fragmented, it is difficult for the Finder to find and work with Apps and Documents, most especially with any great speed. I attempted to do likewise with TechTool Pro 7.x (MicroMat); likewise they could not optimize or check out my whole hard drive volume. A suggested solution of installing a Bootable drive into Apple's proprietary OS partition sounds like it would erase the Mavericks OS X/ Diagnostic Drive rather than be added to it. Could Apple work with Alsoft and MicroMat, so they can make current Boot-Up disks that would again allow me to optimize my entire HD volume? Otherwise, could Apple write its own optimization suite to help speed up my hard drive, if it is unwilling to share its operating code with third-party diagnostic software developers?
Then I thought of using Apple Hardware Test using the familiar Command-D from the Apple proprietary partiion (that was expected to still be included with the OS X Mavericks original upload from the App Store. I found it was not installed despite following the Apple Support Page directions and nothing including ethernet connected. When I tried to connect via the alternate method from the Apple Support Cloud using Option-D, my laptop found nothing at Apple's end. Does such diagnostic software still exist, or has this been scrapped. It would be an imptant tool to use to see if the source
I rerun Permissions and Verification in Command-R mode periodically since upgrading to Mavericks., and all permissions and disk integrity from this test have been corrected and updated as of today. Everything checks out as just fine in terms of software. I am out of ideas of what else to check from my end. Unless anyone in the Apple Support Community has any other good suggestions as to what might be wrong (other than an Apple software tweak) that I can do at my home office, I will have to take my poor laptop over to the nearest Apple Genius Bar and turn my older laptop over to a hardware technician at full cost (Applecare has long since run out).
All suggestions for fixes are welcomed.
— Sally Mayer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Macbook Pro just start to run very slow

Not sure what has happened but my laptop is now extremely slow... with the spinning wheel showing up when clicked on menus or opening folders!!
iv done an update to OSX 10.9.5 but still the same iv check Activity Monitor and cant really see anything which might using up CPU or Memory ? HHD space over 500GB left...
Memory:
Kernel_task = 541 MB
iTunes = 177 MB
Google Chrome Helper = 156 MB
CPU
nothing over 8% when i start to see it slow down
anyone got any idea whats going on >?? iv not installed anything since this has happened..
thanks

Hi John, thanks for getting back iv copied part of what is in the log hopefully this will tell you whats happening ??
Sep 27 18:43:03 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.54 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 18:43:04 DanPro.local launchctl[389]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Sep 27 18:43:08 DanPro.local sudo[392]:     root : TTY=unknown ; PWD=/ ; USER=Admin ; COMMAND=/bin/launchctl load /Library/LaunchAgents/com.parallels.vm.prl_pcproxy.plist
Sep 27 18:43:08 DanPro.local sudo[395]:     root : TTY=unknown ; PWD=/ ; USER=Admin ; COMMAND=/bin/launchctl start com.parallels.vm.prl_pcproxy
Sep 27 18:43:09 DanPro.local sandboxd[374] ([141]): coreaudiod(141) deny file-read-data /Library/Audio/Plug-Ins/Components/A52Codec.component
Sep 27 18:43:10 DanPro.local sandboxd[374] ([141]): coreaudiod(141) deny file-read-metadata /Library/Audio/Plug-Ins/Components/A52Codec.component/Contents
Sep 27 18:43:10 DanPro.local syncdefaultsd[332]: [AOSAccounts] : IAAppProvider::CopyAccountUIDForUser Timed out waiting
Sep 27 18:43:10 DanPro.local com.apple.InputMethodKit.UserDictionary[397]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](760): CoreData: Ubiquity: Admin~D746949C-1F9F-5A11-B4E1-B30CC465D487:UserDictionary
Using local storage: 1
Sep 27 18:43:11 DanPro.local sandboxd[374] ([141]): coreaudiod(141) deny file-read-metadata /Library/Audio/Plug-Ins/Components/A52Codec.component
Sep 27 18:43:12 DanPro.local com.apple.time[303]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
Sep 27 18:43:14 DanPro.local com.apple.SecurityServer[25]: Session 100016 created
Sep 27 18:43:16 DanPro.local imagent[354]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
Sep 27 18:43:17 --- last message repeated 1 time ---
Sep 27 18:43:17 DanPro.local soagent[340]: No active accounts, killing soagent in 10 seconds
Sep 27 18:43:18 --- last message repeated 1 time ---
Sep 27 18:43:18 DanPro.local com.apple.InputMethodKit.UserDictionary[397]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](760): CoreData: Ubiquity: Admin~D746949C-1F9F-5A11-B4E1-B30CC465D487:UserDictionary
Using local storage: 0
Sep 27 18:43:20 DanPro.local com.apple.time[303]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
Sep 27 18:43:21 DanPro.local com.apple.NotesMigratorService[408]: Joined Aqua audit session
Sep 27 18:43:23 DanPro.local apsd[60]: Failed to send activation record to service com.apple.ManagedClient.enroll
Sep 27 18:43:28 DanPro.local soagent[340]: Killing soagent.
Sep 27 18:43:28 DanPro.local NotificationCenter[330]: SOHelperCenter main connection interrupted
Sep 27 18:43:28 DanPro.local imagent[354]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:340)
Sep 27 18:43:30 --- last message repeated 1 time ---
Sep 27 18:43:30 DanPro.local Dropbox[370]: PyObjCPointer created: at 0xbe8fc88 of type {OpaqueJSContext=}
Sep 27 18:43:34 DanPro kernel[0]: fsevents: watcher dbfseventsd (pid: 419) - Using /dev/fsevents directly is unsupported. Migrate to FSEventsFramework
Sep 27 18:43:35 DanPro.local Dropbox[370]: ICARegisterForEventNotification-Has been deprecated since 10.5. Calls to this function in the future may crash this application. Please move to ImageCaptureCore
Sep 27 18:43:54 DanPro.local soagent[434]: No active accounts, killing soagent in 10 seconds
Sep 27 18:43:54 DanPro.local com.apple.time[303]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
Sep 27 18:43:54 DanPro.local com.apple.dock.extra[433]: No endpoint returned trying to load UnreadCountController.bundle, suspending
Sep 27 18:43:54 DanPro.local soagent[434]: No active accounts, killing soagent in 10 seconds
Sep 27 18:44:05 --- last message repeated 1 time ---
Sep 27 18:44:05 DanPro.local soagent[434]: Killing soagent.
Sep 27 18:44:05 DanPro.local com.apple.dock.extra[433]: SOHelperCenter main connection interrupted
Sep 27 18:44:05 DanPro.local imagent[354]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:434)
Sep 27 18:44:35 --- last message repeated 1 time ---
Sep 27 18:44:46 DanPro.local launchservicesd[52]: Application App:"Finder" asn:0x0-e00e pid:315 refs=7 @ 0x7fd472b0f400 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x20020 pid=444 "SecurityAgent"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 18:44:46 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to Finder, psn 0x0-0xe00e, securitySessionID=0x186a6, err=-13066
Sep 27 18:45:00 DanPro.local universalAccessAuthWarn[455]: AccessibilityAPI: pid 304, is not allowed to access the accessibility API. Path: /Library/Little Snitch/Little Snitch Agent.app/Contents/MacOS/Little Snitch Agent
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.150.75#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.150.12#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.150.62#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.148.165#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.150.147#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.149.220#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.150.54#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_destination_prepare_complete 1 connectx to 54.230.151.226#80 failed: 64 - Host is down
Sep 27 18:45:07 DanPro.local System Preferences[446]: tcp_connection_handle_destination_prepare_complete 1 failed to connect
Sep 27 18:45:07 --- last message repeated 7 times ---
Sep 27 18:45:07 DanPro.local System Preferences[446]: TSUpdateCheck: Connection failed! Error - Could not connect to the server. http://www.flip4mac.com/Updater/WMV/update2.plist?version=2.4.4.2&productid=0000 000&OSVersion=10.9.5&CPU=Intel%20Core%20i7&QTVersion=7.7.3
Sep 27 18:45:15 DanPro.local mds[34]: (Normal) Volume: volume:0x7ffb15002000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.BFjJib
Sep 27 18:45:28 DanPro.local com.apple.IconServicesAgent[334]: main Failed to composit image for binding VariantBinding [0x275] flags: 0x8 binding: FileInfoBinding [0x175] - extension: GIF, UTI: com.compuserve.gif, fileType: ????.
Sep 27 18:45:28 DanPro.local quicklookd[440]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: GIF, UTI: com.compuserve.gif, fileType: ???? request size:100 scale: 1
Sep 27 18:45:29 DanPro.local com.apple.IconServicesAgent[334]: main Failed to composit image for binding VariantBinding [0x279] flags: 0x8 binding: FileInfoBinding [0x373] - extension: mp4, UTI: public.mpeg-4, fileType: ????.
Sep 27 18:45:29 DanPro.local quicklookd[440]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: mp4, UTI: public.mpeg-4, fileType: ???? request size:100 scale: 1
Sep 27 18:46:11 DanPro.local sudo[471]:     root : TTY=unknown ; PWD=/ ; USER=Admin ; COMMAND=/bin/launchctl load /Library/LaunchAgents/com.parallels.vm.prl_pcproxy.plist
Sep 27 18:46:11 DanPro.local sudo[473]:     root : TTY=unknown ; PWD=/ ; USER=Admin ; COMMAND=/bin/launchctl start com.parallels.vm.prl_pcproxy
Sep 27 18:46:14 DanPro.local prl_client_app[467]: find_shared_window: WID 104
Sep 27 18:46:14 DanPro.local prl_client_app[467]: CGSOrderWindowListWithGroups: invalid window ID (104)
Sep 27 18:46:14 DanPro.local prl_client_app[467]: CGSOrderWindowList: NULL list pointer or empty list
Sep 27 18:46:24 DanPro.local Installer[477]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 27 18:46:24 DanPro.local Installer[477]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 27 18:46:24 DanPro.local Installer[477]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 27 18:46:24 DanPro.local Installer[477]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 27 18:46:26 DanPro.local sandboxd[374] ([484]): mdworker(484) deny file-read-data /Users/Admin/Applications (Parallels)/{37c79a0d-5740-4675-b78e-1d084bca0232} Applications.localized/.localized (pre-plugin fstype:hfs fsflag:480D000 flags:240000005E diag:0 isXCode:0 uti:dyn.ah62d4rv4gk80w25tr2 plugin:internalPlainTextImporter - find suspect file using: sudo mdutil -t 4348162)
Sep 27 18:46:27 --- last message repeated 3 times ---
Sep 27 18:46:27 DanPro.local sandboxd[374] ([484]): mdworker(484) deny file-read-data /Users/Admin/Applications (Parallels)/{568d769e-ce74-400d-bcbb-5cf810567a9b} Applications.localized/.localized (pre-plugin fstype:hfs fsflag:480D000 flags:240000005E diag:0 isXCode:0 uti:dyn.ah62d4rv4gk80w25tr2 plugin:internalPlainTextImporter - find suspect file using: sudo mdutil -t 4278386)
Sep 27 18:46:51 --- last message repeated 3 times ---
Sep 27 18:46:51 DanPro.local launchservicesd[52]: Application App:"Installer" asn:0x0-26026 pid:477 refs=7 @ 0x7fd471625870 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x27027 pid=490 "SecurityAgent"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 18:46:51 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to Installer, psn 0x0-0x26026, securitySessionID=0x186a6, err=-13066
Sep 27 18:47:22 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "System Preferences" for over 1.00 seconds. Server has re-enabled them.
Sep 27 18:47:24 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "System Preferences" after 3.01 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 18:47:26 DanPro.local tccd[324]: Refusing client without path (pid 63)
Sep 27 18:47:31 --- last message repeated 5 times ---
Sep 27 18:47:31 DanPro.local sandboxd[374] ([544]): mdworker(544) deny file-read-data /Users/Admin/Applications (Parallels)/{37c79a0d-5740-4675-b78e-1d084bca0232} Applications.localized/.localized (pre-plugin fstype:hfs fsflag:480D000 flags:240000005E diag:0 isXCode:0 uti:dyn.ah62d4rv4gk80w25tr2 plugin:internalPlainTextImporter - find suspect file using: sudo mdutil -t 4348162)
Sep 27 18:48:01 --- last message repeated 3 times ---
Sep 27 18:59:39 DanPro.local WindowServer[175]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
Sep 27 18:59:39 DanPro.local loginwindow[38]: find_shared_window: WID -1
Sep 27 18:59:39 DanPro.local loginwindow[38]: CGSGetWindowTags: Invalid window 0xffffffff
Sep 27 18:59:39 DanPro.local loginwindow[38]: find_shared_window: WID -1
Sep 27 18:59:39 DanPro.local loginwindow[38]: CGSSetWindowTags: Invalid window 0xffffffff
Sep 27 18:59:39 DanPro.local launchservicesd[52]: Application App:"loginwindow" asn:0x0-1001 pid:38 refs=7 @ 0x7fd472a1a940 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x28028 pid=551 "ScreenSaverEngine"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 18:59:39 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to loginwindow, psn 0x0-0x1001, securitySessionID=0x186a6, err=-13066
Sep 27 18:59:40 DanPro com.apple.launchd.peruser.501[286] (com.apple.SystemUIServer.agent[314]): The following job tried to hijack the service "com.apple.tsm.uiserver" from this job: 0x7fd160700590.anonymous.loginwindow
Sep 27 19:15:39 DanPro.local loginwindow[38]: resume called when there was already a timer
Sep 27 19:15:58 DanPro.local fontd[320]: BUG in libdispatch client: dispatch_mig_server: mach_msg() failed (ipc/send) invalid memory - 0x1000000c
Sep 27 19:18:23 DanPro.local Google Chrome[307]: Error launching spell checker for U.S. English: Error Domain=NSCocoaErrorDomain Code=256 "The application “AppleSpell.service” could not be launched because a miscellaneous error occurred (OSStatus -1712)." UserInfo=0x811506e0 {NSURL=file://localhost/System/Library/Services/AppleSpell.service, NSUnderlyingError=0x8115a8b0 "The operation couldn’t be completed. (OSStatus error -1712.)", NSLocalizedDescription=The application “AppleSpell.service” could not be launched because a miscellaneous error occurred (OSStatus -1712).}
Sep 27 19:18:30 DanPro.local AppleSpell[378]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 19:19:00 --- last message repeated 5 times ---
Sep 27 19:20:34 DanPro.local Google Chrome[307]: Error launching spell checker for U.S. English: Error Domain=NSCocoaErrorDomain Code=256 "The application “AppleSpell.service” could not be launched because a miscellaneous error occurred (OSStatus -1712)." UserInfo=0x81190860 {NSURL=file://localhost/System/Library/Services/AppleSpell.service, NSUnderlyingError=0x8075f150 "The operation couldn’t be completed. (OSStatus error -1712.)", NSLocalizedDescription=The application “AppleSpell.service” could not be launched because a miscellaneous error occurred (OSStatus -1712).}
Sep 27 19:20:34 DanPro.local Google Chrome[307]: Suppressing further spell checker launch failure warnings
Sep 27 19:20:48 DanPro.local AppleSpell[378]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 19:21:18 --- last message repeated 1 time ---
Sep 27 19:22:36 DanPro.local AppleSpell[378]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 19:22:36 DanPro.local AppleSpell[378]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 19:22:54 DanPro kernel[0]: process Google Chrome[307] caught causing excessive wakeups. Observed wakeups rate (per sec): 158; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 62932
Sep 27 19:22:54 DanPro.local ReportCrash[571]: Invoking spindump for pid=307 wakeups_rate=158 duration=285 because of excessive wakeups
Sep 27 19:23:09 DanPro.local spindump[572]: Saved wakeups_resource.spin report for Google Chrome version 37.0.2062.124 (2062.124) to /Library/Logs/DiagnosticReports/Google Chrome_2014-09-27-192309_DanPro.wakeups_resource.spin
Sep 27 19:24:03 DanPro.local Disk Utility[575]: 10.4-style NSNumberFormatter method called on a 10.0-style formatter, which doesn't work. Break on _NSNumberFormatter_Log_New_Methods_On_Old_Formatters to debug. This message will only be logged once.
Sep 27 19:31:58 DanPro kernel[0]: USBMSC Identifier (non-unique): 08606E6D401FBE50670A65A2 0x951 0x1666 0x100, 3
Sep 27 19:32:03 DanPro.local fseventsd[45]: could not open <</Volumes/KINGSTON/.fseventsd/fseventsd-uuid>> (No such file or directory)
Sep 27 19:32:03 DanPro.local fseventsd[45]: log dir: /Volumes/KINGSTON/.fseventsd getting new uuid: 0E2839C5-4246-4B9E-B9F1-7EDC5D7CBD50
Sep 27 19:32:11 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Disk Utility" for over 1.00 seconds. Server has re-enabled them.
Sep 27 19:32:11 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Disk Utility" after 1.21 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 19:41:27 DanPro kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=611[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
Sep 27 19:46:05 DanPro xpcproxy[622]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
Sep 27 19:58:09 DanPro.local launchservicesd[52]: Someone attempted to start application App:"Archive Utility" asn:0x0-2c02c pid:652 refs=6 @ 0x7fd472b0d3a0 but it still has _kLSApplicationLockedInStoppedStateKey=true, so it is is staying stopped. : LASApplication.cp #2468 SetApplicationInStoppedState() q=LSSession 100006/0x186a6 queue
Sep 27 19:58:21 --- last message repeated 1 time ---
Sep 27 19:58:21 DanPro kernel[0]: hfs: mounted StellarPartitionManager on device disk2s2
Sep 27 19:58:21 DanPro.local mds[34]: (Normal) Volume: volume:0x7ffb13ad7000 ********** Bootstrapped Creating a default store:1 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/StellarPartitionManager
Sep 27 19:58:22 DanPro.local DiskImages UI Agent[667]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 19:58:34 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "CoreServicesUIAgent" for over 1.00 seconds. Server has re-enabled them.
Sep 27 19:58:34 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "CoreServicesUIAgent" after 1.13 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 19:58:36 DanPro.local CoreServicesUIAgent[654]: Error: qtn_file_apply_to_path error: Read-only file system
Sep 27 19:58:49 DanPro.local filecoordinationd[333]: NSFileCoordinator received a message and couldn't parse it. Details: <dictionary: 0x7ffe6cb09270> { count = 2, contents =
"parameters" => <dictionary: 0x7ffe6cb0cc80> { count = 0, contents =
"kind" => <string: 0x7ffe6cb09a10> { length = 15, contents = "providerCheckin" }
Sep 27 19:58:49 DanPro.local Finder[315]: NSFileCoordinator: Sending of a providerCheckin message was interrupted. Details: Connection interrupted
Sep 27 19:59:07 DanPro kernel[0]: CoreServicesUIAg[654] Unable to quarantine: 93
Sep 27 19:59:17 --- last message repeated 2 times ---
Sep 27 19:59:17 DanPro.local authexec[693]: executing /Applications/StellarPartitionManager.app/Contents/MacOS/StellarPartitionManage r.app/Contents/MacOS/StellarPartitionManager
Sep 27 19:59:17 DanPro.local launchservicesd[52]: Application App:"Finder" asn:0x0-e00e pid:315 refs=7 @ 0x7fd472b0f400 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x34034 pid=695 "SecurityAgent"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 19:59:17 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to Finder, psn 0x0-0xe00e, securitySessionID=0x186a6, err=-13066
Sep 27 19:59:23 DanPro kernel[0]: disk1s1: media is not present.
Sep 27 19:59:23 --- last message repeated 10 times ---
Sep 27 19:59:23 DanPro kernel[0]: msdosfs_fat_uninit_vol: error 6 from msdosfs_fat_cache_flush
Sep 27 19:59:23 DanPro.local mds_stores[177]: (/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T)(Error) IndexStore in int _sqlite_bulkEnd(PersistentIDStore *):sqlite3BtreeCommit failed; rc = 13
Sep 27 19:59:47 DanPro.local universalAccessAuthWarn[455]: AccessibilityAPI: pid 693, is not allowed to access the accessibility API. Path: /Applications/StellarPartitionManager.app/Contents/MacOS/StellarPartitionManage r.app/Contents/MacOS/StellarPartitionManager
Sep 27 20:00:20 DanPro.local launchctl[747]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Sep 27 20:00:21 DanPro.local com.apple.IconServicesAgent[745]: IconServicesAgent launched.
Sep 27 20:00:21 DanPro.local distnoted[748]: # distnote server agent absolute time: 4798.155538505   civil time: Sat Sep 27 20:00:21 2014   pid: 748 uid: 0 root: no
Sep 27 20:01:36 DanPro kernel[0]: hfs: unmount initiated on StellarPartitionManager on device disk2s2
Sep 27 20:13:07 DanPro.local CoreServicesUIAgent[934]: Saving rejection record:
Rejected URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/
App URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/
Sep 27 20:13:07 DanPro.local CoreServicesUIAgent[934]: App URL discarded
Sep 27 20:13:07 DanPro com.apple.launchd.peruser.501[286] ([0x0-0x3f03f].com.westerndigital.WDDriveUtilities[938]): Exited: Killed: 9
Sep 27 20:13:17 DanPro.local CoreServicesUIAgent[934]: Saving rejection record:
Rejected URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/
App URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/
Sep 27 20:13:17 DanPro.local CoreServicesUIAgent[934]: App URL discarded
Sep 27 20:13:17 DanPro com.apple.launchd.peruser.501[286] ([0x0-0x40040].com.westerndigital.WDDriveUtilities[941]): Exited: Killed: 9
Sep 27 20:13:43 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
Sep 27 20:13:44 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.28 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 20:13:56 DanPro.local CoreServicesUIAgent[947]: Saving rejection record:
Rejected URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/Contents/WDDriveUt ilityHelper.app/
App URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/Contents/WDDriveUt ilityHelper.app/
Sep 27 20:13:56 DanPro.local CoreServicesUIAgent[947]: App URL discarded
Sep 27 20:13:56 DanPro com.apple.launchd.peruser.501[286] ([0x0-0x41041].com.westerndigital.WDDriveUtilityHelper[946]): Exited: Killed: 9
Sep 27 20:14:08 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
Sep 27 20:14:13 DanPro.local Finder[315]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: FileInfoBinding [0xe003] - extension: (NULL), UTI: dyn.agk80255drq, fileType: lock request size:18 scale: 1
Sep 27 20:14:13 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 5.68 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 20:14:15 DanPro.local Finder[315]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: FileInfoBinding [0xe103] - extension: (NULL), UTI: dyn.agk81n5ddrq, fileType: ulck request size:18 scale: 1
Sep 27 20:14:19 DanPro.local launchservicesd[52]: Application App:"Finder" asn:0x0-e00e pid:315 refs=8 @ 0x7fd472b0f400 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x43043 pid=953 "SecurityAgent"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 20:14:19 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to Finder, psn 0x0-0xe00e, securitySessionID=0x186a6, err=-13066
Sep 27 20:14:33 DanPro.local CoreServicesUIAgent[957]: Saving rejection record:
Rejected URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/
App URL=file:///Users/Admin/Downloads/WD%20Drive%20Utilities.app/
Sep 27 20:14:33 DanPro.local CoreServicesUIAgent[957]: App URL discarded
Sep 27 20:14:38 DanPro com.apple.launchd.peruser.501[286] ([0x0-0x44044].com.westerndigital.WDDriveUtilities[955]): Exited: Killed: 9
Sep 27 20:15:19 DanPro kernel[0]: USBMSC Identifier (non-unique): 08606E6D401FBE50670A65A2 0x951 0x1666 0x100, 3
Sep 27 20:15:22 DanPro.local fseventsd[45]: check_vol_last_mod_time:XXX failed to get mount time (25; &mount_time == 0x1100a43d8)
Sep 27 20:15:22 DanPro.local fseventsd[45]: log dir: /Volumes/KINGSTON/.fseventsd getting new uuid: 32BF5BC3-BF24-43A9-A2F8-A6067526CF23
Sep 27 20:16:15 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Dock" for over 1.00 seconds. Server has re-enabled them.
Sep 27 20:16:17 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Dock" after 2.97 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 20:16:21 DanPro.local fseventsd[45]: unmounting: failed to remove log dir /Volumes/KINGSTON/.fseventsd (Directory not empty)
Sep 27 20:16:21 DanPro.local Finder[315]: CreateWithFileInfo failed to create URL with FSRef, falling back to blank icon.
Sep 27 20:24:26 DanPro xpcproxy[997]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
Sep 27 20:28:12 DanPro.local WindowServer[175]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
Sep 27 20:28:12 DanPro.local loginwindow[38]: find_shared_window: WID -1
Sep 27 20:28:12 DanPro.local loginwindow[38]: CGSGetWindowTags: Invalid window 0xffffffff
Sep 27 20:28:12 DanPro.local loginwindow[38]: find_shared_window: WID -1
Sep 27 20:28:12 DanPro.local loginwindow[38]: CGSSetWindowTags: Invalid window 0xffffffff
Sep 27 20:28:12 DanPro.local launchservicesd[52]: Application App:"loginwindow" asn:0x0-1001 pid:38 refs=7 @ 0x7fd472a1a940 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x48048 pid=999 "ScreenSaverEngine"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 20:28:12 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to loginwindow, psn 0x0-0x1001, securitySessionID=0x186a6, err=-13066
Sep 27 20:40:10 DanPro kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1007[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
Sep 27 20:40:12 DanPro.local launchservicesd[52]: Application App:"Little Snitch Agent" asn:0x0-7007 pid:304 refs=5 @ 0x7fd47161eff0 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x1001 pid=38 "loginwindow"", "LSApplication:0x0-0x48048 pid=999 "ScreenSaverEngine"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100006/0x186a6 queue
Sep 27 20:40:12 DanPro.local WindowServer[175]: [cps/setfront] Failed setting the front application to Little Snitch Agent, psn 0x0-0x7007, securitySessionID=0x186a6, err=-13066
Sep 27 20:42:13 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Little Snitch Agent" for over 1.00 seconds. Server has re-enabled them.
Sep 27 20:42:13 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Little Snitch Agent" after 1.09 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 21:03:55 DanPro xpcproxy[1028]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
Sep 27 21:03:57 DanPro.local com.apple.dock.extra[433]: <NSXPCConnection: 0x7fa1b3528b30>: received an undecodable message (no exported object to receive message). Dropping message.
Sep 27 21:21:57 DanPro.local com.apple.IconServicesAgent[334]: main Failed to composit image for binding VariantBinding [0x253] flags: 0x8 binding: FileInfoBinding [0x5dd] - extension: jpg, UTI: public.jpeg, fileType: JPEG.
Sep 27 21:21:57 DanPro.local quicklookd[1057]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: jpg, UTI: public.jpeg, fileType: JPEG request size:16 scale: 1
Sep 27 21:21:57 DanPro.local com.apple.IconServicesAgent[334]: main Failed to composit image for binding VariantBinding [0x7d7] flags: 0x8 binding: FileInfoBinding [0x34b] - extension: ai, UTI: com.adobe.illustrator.ai-image, fileType: PDF .
Sep 27 21:21:57 DanPro.local quicklookd[1057]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: ai, UTI: com.adobe.illustrator.ai-image, fileType: PDF request size:16 scale: 1
Sep 27 21:21:59 DanPro.local com.apple.IconServicesAgent[334]: main Failed to composit image for binding VariantBinding [0x443] flags: 0x8 binding: FileInfoBinding [0x5e3] - extension: jpg, UTI: public.jpeg, fileType: ????.
Sep 27 21:21:59 DanPro.local quicklookd[1057]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x603] flags: 0x8 binding: FileInfoBinding [0x503] - extension: jpg, UTI: public.jpeg, fileType: ???? request size:16 scale: 1
Sep 27 21:22:20 DanPro.local com.apple.IconServicesAgent[334]: main Failed to composit image for binding VariantBinding [0x9eb] flags: 0x8 binding: FileInfoBinding [0x15f] - extension: png, UTI: public.png, fileType: ????.
Sep 27 21:22:20 DanPro.local quicklookd[1057]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x803] flags: 0x8 binding: FileInfoBinding [0x703] - extension: png, UTI: public.png, fileType: ???? request size:16 scale: 1
Sep 27 21:22:22 DanPro.local WindowServer[175]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
Sep 27 21:22:52 --- last message repeated 1 time ---
Sep 27 21:38:53 DanPro kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1076[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
Sep 27 21:44:58 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Little Snitch Agent" for over 1.00 seconds. Server has re-enabled them.
Sep 27 21:45:01 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Little Snitch Agent" after 4.23 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 27 21:46:22 DanPro.local com.apple.IconServicesAgent[334]: Icon filename entry missing from bundle info dictionary for bundle at URL: file://localhost/System/Library/PrivateFrameworks/AOSKit.framework/Versions/A/X PCServices/com.apple.iCloudHelper.xpc/
Sep 27 21:51:58 DanPro.local Google Chrome[307]: CFUserNotificationDisplayAlert: called from main application thread, will block waiting for a response.
Sep 27 21:52:16 DanPro.local uTorrent[1107]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 27 21:52:16 DanPro.local uTorrent[1107]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 27 21:54:10 DanPro.local ntpd[179]: SYNC state ignoring +0.165018 s
Sep 27 22:00:49 DanPro.local AppleSpell[378]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 22:01:19 --- last message repeated 2 times ---
Sep 27 22:01:22 DanPro.local AppleSpell[378]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
Sep 27 22:19:28 DanPro.local Console[1150]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
Sep 27 22:24:28 DanPro xpcproxy[1181]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
Sep 27 22:24:29 DanPro.local WindowServer[175]: disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
Sep 27 22:24:30 DanPro.local syncdefaultsd[1180]: Fixing push token
Sep 27 22:24:31 DanPro.local launchctl[1183]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Sep 27 22:24:31 DanPro.local WindowServer[175]: common_reenable_update: UI updates were finally reenabled by application "Safari" after 2.50 seconds (server forcibly re-enabled them after 1.00 seconds)

Premiere Pro and After Effects running very slowly

Hi all,
I realise that this is a commonly asked question and there are many other threads about it, but as each situation seems so unique, I've given up trawling for answers through other threads (as most of the technical jargon is thoroughly beyond me ) and figured I'd just start my own thread detailing my personal issues with the programmes.
Basically, PP and AE have both suddenly started to run unbelievably slowly. I haven't done much video work for quite a while now (not for a few months), but when I did in the past it always ran reasonably smoothly. However now I am trying to edit some HD video, not a huge amount, but around 4 minutes worth. I am then replacing the clips with AE compositions for more creative editing. It seems as though everytime I try to move a clip, or replace a clip or do just about any changes, no matter how slight, I get the spinning wheel of death and it can take minutes just to load a clip or even move it! One of the longest lags I timed was around fifteen minutes. Playback is virtually impossible. Sound will play, but the video is so incredibly laggy, or simply non existent so it's almost pointless to try. And don't even get me started on the lag when importing through AE and back!
I am editing on a 2011 iMac. I have a terabyte harddrive with around 342GB of free space.
Memory: 4GB 1333 MHz DDR3
Graphics: AMD Radeon HD 6970M 1024 MB
Software: Mac OS X Lion 10.7.5 (11G63)
Thank you for any help and advice you can give me!

Hi SaccaraBird,
That's odd that you were able to edit before and are now having trouble.
Have you done any updates to your system?
Are you using different footage?
When you move a clip, what happens? Do you get the Spinning Beachball?
Are any effects on the clips?
Are you using the Mercury Playback Engine GPU acceleration?
Thanks,
Kevin

Dramatically slower encode/render times from Premiere Pro CC 2014 via both AME 2014 and direct export via PP

My recent update to Adobe CC 2014 apps has been an unmitigated disaster. Was running the 2013 version until last week and everything was just dandy. Very good performance and excellent render/encode times even for stuff with lots of filters and fx.
Since update 1-2 min videos with no fx or filters (or even transitions) have gone from exporting in under two minutes to well over 25 minutes. These exports are with the same presets I regularly use (Vimeo 720HD H.264).
I've been poking around the forums here for two days looking for answers and can't find anything that works. Tried the whole "App Nap" toggle as well as a few other tips. Didn't do squat. Looking for any hints/answers. Thanks.
Mac Pro Mid 2012
2 x 2.4 GHz 6-Core Intel Xeon
32 GB 1333 MHz DDR3 ECC
ATI Radeon HD 5870 1024 MB
OS X 10.9.5 (13F34)
System SSD 500GB
Cache SSD 500GB
Media HD 1TB

Hi MXSw,
MXSw wrote:
All right. More experimentation has been done. Seems like the renaming of Adobe folders fix prescribed in the link below might have helped a bit.
Premiere Pro CC 2014 renders are painfully slow.
You can rename folders, but I prefer to do it this way: Premiere Pro CC freezing on startup or crashing while working (Mac OS X 10.9, and later)
MXSw wrote:
Kicked out a 1 minute edit with some color/fx in under 10 minutes. Not as fast as in the past but at least the CPU seemed to be cranking at 500% and above per Activity Monitor. Its barely gone over 250% in previous attempts.
That sounds a lot better.
MXSw wrote:
Same 1 minute edit took 35 minutes however when I exported from a PP timeline using MXF clips instead of QTs. I assumed the QTs would speed up the process but in the past I've gotten great performance on big old RED raw files so still a bit of mystery why I can't approach the speeds I had prior to most recent CC update.
Maybe updating your project file has something to do with it. I'll keep my eye on this issue. Thanks for reporting.
Regards,
Kevin

Premiere Pro CC 2014 Sequence Running Very Slow

Similar Messages

Maybe you are looking for