Premiere Pro CC 7.1 - 'Trim Monitor' no longer available?

My workflow in Premier Pro CC 7.0.1 involved heavy use of the Trim Monitor for frame accurate adjustment of trims. After upgrading to 7.1 I found that 'Trim Monitor' was no longer an option on the 'Window' menu. Has the Trim Monitor been dropped?
I know that I can achieve the same results in other ways, but found them so cumbersome in comparison to my previous workflow that I have reverted to 7.0.1 for now.

Thank you. I was aware of the 'T' shortcut, but as you correctly distinguish this switches the Program Monitor to Trim mode rather than opening the separate Trim Monitor which as far as I can ascertain could only be accessed through the Window menu. You response implies that the Trim Monitor is now dead, although it is still documented separately from Trim mode in the help file, and although the latter has been updated to indicate what's new in 7.1 there is no indication that Trim Monitor has been withdrawn in that update.
You say that the functionality of the Trim Monitor has been folded into the Program Monitor and I accept that that is true since that was the other way of working that I mentioned in my original post. I was able to achieve the same results, so the functionality is there. What is not is the same ease of use. Specfically using the Trim Monitor I could move quickly through many trim points using the up and down keys to move been points and then the left and right keys (without any modifiers) to adjust the trim by a frame or two. In Trim mode I have to use Crtl-Left and Ctrl-Right to get the same result. This slows me down considerably since if I try to move too fast the left and right hands get out of sync. If I hit up or down whilst Ctrl is still depressed, or left or right whilst it is not depressed, I get dumped back in Program Monitor normal mode and have to hit 'T' again to re-enter Trim Mode. This may seem minor but the one time I tried this it doubled my edit time and led me to spend time and effort to revert to 7.0.1.

Similar Messages

I need to create DVDs but Premiere Pro requires Encore, and Encore is no longer available

I had Encore installed, but it gave me error messages when trying to import a Premiere Pro CC 2014 file. Following the advice from the support listings, I uninstalled Premiere Pro, then downloaded and ran the Adobe cleanup file, which removed my copy of Encore. Now I can't find a way to download it again because it's only available if I download Premiere Pro CS6, and there's no way to find and download PP CS6.
I'm in the middle of a project for the Library of Congress, that requires me to send a DVD. Adobe should recognize that DVDs are still important for some applications, and should be making Encore as available as all the other applications in Creative Cloud. This has become a very frustrating process when it should be getting easier.

Are you sure? CS6 still shows up in my Creative Cloud app (which I upgraded moments ago, by the way).
Your point is that PR/EN CS6 is still available, and that is true.Your list is of the "installed apps" section and indicates that it is already installed. The poster indicates it was uninstalled and he should be looking in the "find new apps" area. Many users appear to be continuing to install PR CS6 with EN CS6. But others are having problems (as some have all along).
A new problem appears to be that users seem to believe they have to uninstall PR CC in order to add PR CS6. And some odd errors have added fuel to the fire.
The errors referred to by this user were probably no more than trying to dynamic link from PR CC to EN, which, of course, does not work.

Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage?

Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage? I import my footage into the project like normal. I drag it to the source monitor on the left hand side to set in and out points then I drag it to the time line. The footage drops into the time line with no problem but when I go to play the footage in the time line it plays back on the source monitor and not on the program monitor like it is suppose to. Other times ill drag the clip to the time line and trim it there and it will be fine and show up on the program monitor. Then ill go try to set a clip to have in and out points (which is suppose to show up in the source monitor) but it shows up in the program monitor. The clip is not even in the time line it should not be on that monitor! I have updated the program to the late update. I have re installed the program numerous times and I have even ran the Adobe Clean up program. Couldn't find much on this problem. Please help thank you! I have a PC. My computer is also way over the recommended minimum specifications to have the program installed on.

Definitive Answer (I believe): It's all about this setting, "Write XMP ID To Files On Import" - which confirms that Adobe Premiere Pro is deliberately modifying the .mov file: http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
These posts give some background as to why having this setting enabled would be beneficial: one benefit being to be able to skip conforming files by matching the conformed file with the original using the embedded XMP tag :-
http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
http://www.dvinfo.net/forum/adobe-creative-suite/498627-why-premiere-modifying-video-files .html
https://forums.creativecow.net/thread/205/876064
(Found using Google search term "adobe premiere pro date modified")

Premiere Pro CS4 - Problem with the monitor program.

Hi. I'm not able solving problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline and play it in the monitor program, vision in the monitor program doesn't run:black monitor or a little part of the photo appear... sometimes distort colours. Asus P5QPRO, Intel 9550 and Sparkle Nvidia GeForce 9800 GTX+ 1024 DDR3; last gpu driver and directX are installed. Different configuration of stratch disks were tested. Where am I wrong?

Dear Bill,
thanks for your answer and your article. I tried with your NTSC 4:3 720x480 PAR 0.9 and, "magically", no more problem!!! I used the script pocedure in Photoshop CS4 to resize my images. Now, before starting my workflow and hoping not to overuse your patience, I would like to indicate you my equipment and my target: I use a Canon Eos 7D (generally for still images, 90% are vertical, and just some videos) and I use Premiere Pro CS4 to burn a dvd (normal, 4.7 Gb or double side, more than 8 Gb) with a 16.9 lcd tv (I'm Italian); my camera save as .jpg and .raw (but why use heavy .raw files if I've to redute to 720x480?!??).
So, according to your "everyone wants the highest quality that they can obtain when doing theri videos..." and "your video project may vary, so you will need to plug in the dimensions for YOUR video project in that case", I've a question: which is the best for me?
And then:
1 - Premiere Pro CS4 havn't a batch or a script procedure for still image like PS (only for videos)!?!
2 - Premiere does'nt allow you to import images like 4.181 Kb (a too large dimension file error appears)!
3 - In the timeline of Premiere, after you dragged images, you can select them and right click to perform "resize to frame size": it seems to run good without problem, but what appen to the photo? Which is it's pixel?
4 - In the general preferences of Premiere you can to optimize rendering for "memory" or not: which is the best for you?
5 - I attached file with a screen of something strange in Premiere: dragging an image (the first of the project) in the timeline, the timeline appears distort (you can see the part in the yellow square): then, when I render the project and play in the monitor program, it becames normal.
Thanks!

Premiere Pro doesn't recognize my monitor resolution.

My monitor has a 2560 x 1440 Pixel Resolution 27" LCD Display. I just switched from Premiere Pro CS6 to Premiere Pro CC. When I open the program, it says my monitor does not meet the minimum size requirements. It clearly doesn't recognize the high-res display. The video playback looks ragged. How can I fix this?

Well we need a lot more hardware data. What GPU? How much VRAM? What driver version?
What CPU, memory, Mac or PC etc?

Premiere Pro CC crashes when trimming (often during playback)

I've been having Premiere Pro CC freeze on me about every 2 minutes when I trim in the timeline using keyboard shortcuts (trim backward/forward one frame). It seems to happen more often during playback, but also happens exclusively during trimming (and occasionally when I use a keyboard shortcut to step forward/backward one frame - obviously not during playback).
This appears to be a weird freeze & not a crash, in the sense that playback freezes and I get the spinning beachball/wheel of death and premiere is unresponsive, but when I force-quit, Premiere resumes playback for a second before giving the "Premiere has experienced a serious error and must shut down" error message, and then shutting down.
Any help would be much appreciated - this is really causing a massive slow-down in my editing.
I'm running a MacBook pro
Retina, 15-inch, Early 2013
2.7 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GT 650M 1024 MB
C02L255BFFT1
OS X 10.8.4 (12E55)
Premiere Pro CC fully updated, I'm editing 48kHz .aiff audio files and/or h.264 video in a 1080p 24fps timeline, waveforms on, GPU acceleration OFF.
The same issue also happens on my iMac (from early 2013 - I don't have the specs on me).

Hi minutephysics,
Thanks for your posts. It is always better to have latest version of cuda drivers even, if you are not using the gpu acceleration. So, please update the drivers and then check the performance. Please update the drivers from the link.
http://www.nvidia.com/object/cuda-mac-driver.html
Regards,
Vinay

Adobe Premiere Pro Help | Using the Source Monitor and Program Monitor

strJiveDescriptionhttp://helpx.adobe.com/premiere-pro/using/source-monitor-program-monitor.html

Even back in the days of printed manuals, there were often sections, that repeated, as they had application to a few slightly different topics. I always found that better (then), than just having a note to "go to _____ for info on this." Probably used a few extra trees, but one did not have to constantly flip back and forth. Now that we're talking 1's and 0's, I can see where a limited bit of repetition would enhance the flow of knowledge, and understanding, even when hyper-linked.
Just my observations,
Hunt

Premiere pro Crash with AOC USB Monitor

I just purchased an AOC 1659FWU USB Monitor. The monitor works fine with AfterFX but when I try to launch Premiere Pro CC It crashes almost instantly. I know that it has something to do with the GPU and how it decides which one to use. I have uninstalled the monitor to trouble shoot it and once I did the program launched fine. Wondering if there are any workarounds or updates for this issue.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 7.2.2.33
Application Timestamp: 532c3999
Fault Module Name: ig75icd64.dll
Fault Module Version: 10.18.10.3496
Fault Module Timestamp: 5319f0ea
Exception Code: c0000005
Exception Offset: 000000000016861a
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 2a27
Additional Information 2: 2a2796b8a8f25c25edaa02cd7f9a7d2c
Additional Information 3: c663
Additional Information 4: c6639144cc99799e76f82edec7b83562
Thanks in advance!

Hi Ferret Head,
Please go to premiere pro>preferences>playback
and check the option for the second monitor under video device.
Thanks

Premiere Pro CS6 with external HDMI monitor

Hello all
Is it possible to use an HDMI monitor as an external preview monitor when editing with Premiere Pro CS6? If so, then how is it connected, and where can i find the correct tick box in
Premiere Pro CS6? I have an apple iMac (early 2009) intel core 2 Duo (if this is relevant).
I need to be sure of the correct colour/look output, etc.
Any advice would be greatfully received.
Thanks
Karl.

Hi Ferret Head,
Please go to premiere pro>preferences>playback
and check the option for the second monitor under video device.
Thanks

Premiere Pro CS3 Crashed, and now will no longer start back up again..

I was working on a project today using Cs3, I've had it since spring and it always worked fine until tonight when i was editing a project.. In the middle of my editing the program unexpectedly froze than crashed...
I then tried to restart it and i got this message which popped up in 4 windows..
" Sorry a serious error has occurred that required adobe premiere pro to shut down. We will attempt to save your current project" i then hit ok and it exited completely, i tried to open it again, same thing..
so then i restarted my computer and i got a different message that said something like i wasn't aloud to use the program anymore and had to reinstall it or cal adobe tech support... so i put the CD in and re-installed it and got the same message when opening the program up again "serious error messages" I then went to the CS3 updates to update it back to version 3.2.0. But still continue to get the error message.
so something must have happened during my edit that caused it to stop working, but i have no idea what it could be. I even tried to do a System restore..which also got a error message....thanks vista...
anyways..i can use some help, thanks
:edit:
i tried to reinstall Premiere Pro 1.5 since Cs3 was an upgrade.. I reinstalled it then reinstalled Cs3 again, and i still get the "serious error Message" so that didn't work...

Ok i looked at the Troubleshooting site Eddie gave me, and tried to answer the questions as best i could.
Never used any Adobe Beta software.
I freed up a lot of space off of my hard drive, i only had like 5GB-10GB left, but it still worked when having such low space
I did a disk clean up as well as disk defragment, and moved a lot of high GB files over to my second hard drive. i have over 27GB of free storage left now, its a 150GB hard driver. should i have more?
I Tried holding down the Shift button, but didn't help
I tried to open up Encore Cs3 which came with Premiere, i barely ever used this one, but its funny how this wont work either. I think i used it once before and it worked. But it old how none of my Cs3 Programs. never installed On location.
also this isn't a pirated copy or anything, i bought it as an Upgrade from Amazon back in the spring. Upgrading from Premiere Pro 1.5 which also wasn't pirated, i got that as a gift.
My older version of Premier, 1.5 still works, and my older versions of Photo shop (CS?) and After effects (6.5) still work. So that's good. Just having a problem with Cs3 :(
Premiere Pro
1. Version number Cs3
2. Installation language -English
3. Updates applied -3.2, latest?
Operating System
1. Name Windows Vista 64-bit
2. Update/patch level- everything is up to date.
3. Installed language - English
CPU type and speed
Intel core 2 Quad Q6600, 2.4
Amount of memory (RAM)
4Gb DDR2 800 G.skill 2X2, only 2 sticks.
Video card
1. Manufacturer - Evga
2. Model 8800 Ultra Ko
3. Driver version lastest driver for that card
Number of monitors (displays) in use
only One monitor
Audio card
1. Manufacturer On board audio . Evga
2. Model - 680i Sli motherboard
3. Driver version- i'm pretty sure its up to date.
Each hard drive's capacity and space remaining
1 150GB Raptor 27GB remaining, Main hard drive.
1 300GB 216 Remaining, Storage.
Hardware capture device
1. Manufacturer . Both Seagate
2. Model main one, which has Premier on is the Seagate 15- GB 10,000 RPM Raptor.
3. Driver version number
Capture software
1. Name I capture using The premiere pro capture tool
2. Company
3. Version
sorry that i haven't answered all the questions on the Trouble shooting, i'm still going through them and testing everything.

Premiere Pro CS4 does not import EX1 files longer than 1 hour

I had to record a long speech and used a Sony XDCAM HD EX1 camera with a 32 Gb and a 16 Gb SXS cards. The speaker paused after 1h 26 min. I stopped the recording and waited until the green light that allows recording the segment came on. Later I recored smaller segments.
I copied all the recorded files to the PC hard disk ( Intel Quad Core 2.4 Ghz with 3.25 GB RAM with XP Proofessional SP3).
I used Sony Clip browser to watch the clips and all of them were perfect. Then I opened premiere Pro CS4 4.21 and I wanted to import this 27 GB file. In the media browser appeared only one mp4 file. All the short ones where imported normally but the big one freezed premiere and the only way to close premiere was with the windows task manager.
I checked again in the Sony XDCAM clip browser version 2.6 and you can see it perfectly. There was a detail, though: in the lower part of the preview window I saw 6 marks. When I checked the file in the disk, I found that the 27 Gb file was separated in 7 parts. Each of them was 3.51 Gb and the last one 2.5 Gb. That means that the file was cut in pieces that were less than 4Gb supposed max file lenght.
I tried many ways to import and no result. The I used the "export " of the sony clip browser. There is one choice that is "MXF for XDCAM HD". When I chose this item another panel appeared and showed a 1440 X 180 59.94i 25Mbps choice. I took it and after some time it created the 27 Gb file that I could import it normally with 4 audio tracks. But there is a drawback a "media concept" logo appeared to remeber to "buy" the program.
Anyhow, the question is: How can I import to Premiere CS4 a MP4 file created by a Sony EX1 HD camera whose lenght is more that 1 hour long ?
Thanks
Wolfgang

I think is the contrary because the clip browser copies all the foleders needed. I got this opinion from another forum that copies into Final Cut:
"My workflow is to create a hard drive folder for the project, then use Clip Browser to import the clips from the card. I review the clips, labelling them, adding logging notes, setting the status and putting in essence marks as needed (the number of characters available for the essence mark description is fairly limited). I then open FCP, create and save a new project then call up XDCAM Transfer. I select the project folder and it will pull in all the clips. I then filter for OK status, occasionally create subclips then import. The clips come over to the bin, with their names and with the essence marks converted to markers. Obviously there are backups taken - I've not mentioned them."

Premiere Pro won't span multiple monitors

Premier Pro CS3
I cannot get the PP app to span multiple monitors. Previously I have used Premiere to span two 22" monitors so I can have a very wide timeline. Now that I have installed CS3, it "takes over" my second monitor as a "Program" monitor and I cannot figure out how to shut it off. It also makes this monitor useless for any other applications that I have open while CS3 is open. Help!

Well, now it's working and I have NO CLUE WHY... perhaps opening and closing Premiere 5 times is required before the videocard gets into the act. In any case, it has just started working and I completed an entire editing sequence with no freaky behavior at all.
I love it when a plan comes together - but it's sure nice to know "why" for next time ocasionally... I did use an older saved sequence as a starting point this time, so perhaps something was corrupted in the "new workspace" that I tried to save.
Now, of course, I'm afraid to ever turn this computer off again, or even close Premiere...
Thanks to all for your help - you will all get a free autographed copy of my next book, "Dual Monitors for Dummies"...

Premiere Pro CC: Drag from source monitor to timeline

Hi,
I'm trying to figure out why this does not work. I can only drag video from the Source Monitor into my timeline. But when I try to drag audio, it just shows me a stop sign and no errors. So I can't really figure out why this is happening.
The workaround for this is to make the clip in the project window into it's own sequence, cut the clip and it's audio, and paste into the working timeline. However I don't think this is a good way of working and it's really annoying. Tried looking for results on how to fix this and only found ways of going around the problem instead of getting the problem resolved.
S

How funky, thanks Kevin. This solved the issue, I knew it had to be something extremely small that just kept bugging me.
S

HT3678 I find that even with my Pro key someof the functions are no longer available. Such as looping movies or clips.

I recently upgraded to Lion but find that my Quicktime Pro key doesn't free up all the function that I originally had.
I can't loop clips the function is greyed out.
Anyone else find this or is there an update toreturn this to what I paid for.

"Loop" in Quicktime Pro 7.6.6 is still broken running in Mac OS 10.7.4 .
Apple, please fix this ! Some of us use Quicktime PRO in our PROFESSIONAL jobs , y'know what I mean? This isn't a hobby or something that can wait months and months to fix.

My videos from go pro hero 3 black edition are no longer available

After update ios7 I can not longer play my videos which were taken with go pro 3 black edition ! Why? I did not pay apple for this ! Go pro black edition isn't a cheap thing and having waisted all memories that were taken and played simple before on same device!
<Edited By Host>

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help try adding a new video to your Camera Roll. Perhaps the update process caused the problem. If a new video plays correctly then reload your older videos from your backup.
Perhaps some other users can provide more assistance.

Premiere Pro CC 7.1 - 'Trim Monitor' no longer available?

Similar Messages

Maybe you are looking for