Premiere Pro CC (7.2.2) won't close on OSX mavericks

I've already tried reinstalling it once. If I click "Premiere Pro" in the top menu then go to "Quit", nothing happens. "Close project" doesn't do anything either, but luckily saving still works fine.
I have to force quit it to make it close, and when I do this error briefly pops up:
So what are my options? Running Mavericks as title states and have already tried reinstalling it, so please don't waste time suggesting that as the solution. Thanks in advance

Fixed it by renaming the profile folder, see instructions here - Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down! Frustrated.

Similar Messages

99 or 100% when it says Premiere Pro has stopped working and needs to close. What's going on?

I am using the premiere pro trial at the moment and have been trying to render a video for a solid week now. My computer is far more powerful then the recommended specs and yet it still takes 2 hours to attempt to export a 3 minute video (that isn't even heavily edited) and not only that but it will get to 99 or 100% when it says Premiere Pro has stopped working and needs to close. I have used earlier versions of the product before and never had such problems, even my 2 year old laptop could breeze exporting. What's going on?

Thanks, I'm a bit new to asking for help!
Version : Premiere Pro CC 2014.2 (8.2)
It is up to date
I'm using Windows 8.1 build 9600
My sources are contained in .mov, .mp4 and .png. The codec I'm trying to use is H.264
After I set the project to export I got this error message every time it gets to either '99' or '100%' completed. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
I have never had such a problem with the program which makes me think it might have something to do with a recent update.
No other notable software was running during the export.
I don't have any third-party effects or codecs installed.
I have 64 bit OS and processor, Intel i5 - 4670K quad core clocked at 3.40 GHz. 12 GB of RAM. And a GTX 770 with 2GB of video RAM.
Unless it was installed in the trial, I do not have the Mercury Playback Engine.
And finally, it can be noticeably choppy during the preview when it gets to the part I don't have rendered but is fine again for a bit if I replay those parts. A part from being a bit slower then usual, I didn't actually run into a major problem until I started exporting.
Thank you for the help! Any suggestions?

I have had my mac-book pro for almost a year, and have just got OSX Mavericks, and now the sound on my laptop is working in a sporadic way, can I change this at all on system preferences or will I have to get it repaired?

On my mac-book pro the sound isnt working after I have installed OSX Mavericks, should I take it to be repaired, or can I do something on System Preferences?

In addition to checking system preferences/sound/output and selecting built in if that does not work, make sure volume is up and mute not checked.
You can try the following, Take a set of headphones and plug theim in and out several times (there is a micro switch that sometimes gets stuck)
Go to applications>utilities>Audio MIDI set up, see if you can select built in there, make sure volume is uo mute not checked.
Try a NVRAM/PRAM reset:
Power off, power back on holding the following keys OPTION + COMMAND + P + R
Continue to hold these keys till you hear the start chime 2 times, then release,reboot

Quark 7.5 won't launch with OSX Mavericks 10.9.1

QuarkXPress 7.5 won't launch with OSX Mavericks 10.9.1 I keep getting the window saying "QarkXPress quit unexpectedly" (see image below) and when I click on reopen, it does the same everytime. HELP!

Hi DCG,
hope oyu had a great christmas.
I posted the post you reference on June 11, 2013.
Since then a lot of things have happened. We released 9.5.4 several weeks ago, which seems to work fine for everybody under Mavericks.
We also posted an update for version 10 that makes it Mavericks compatible and afterwards released an update that fixes most issues reported.
So please try 10.0.2 or 9.5.4 on Mavericks, they should both work fine: http://www.quark.com/de/Support/Downloads/Search_Results.aspx?pid=1&oid=2&ftid=2
Thanks
Matthias

Premiere Pro CC and Media Encoder won't start

Hey everyone,
I have a huge problem: My Adobe Premiere CC won't start. I've tried all the solutions I've found in the internet, but nothing seems to work for me
I am using OS X 10.9.3.
Here is a part of my report:
Process:         Adobe Premiere Pro CC 2014 [1153]
Path:            /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Identifier:      com.adobe.AdobePremierePro
Version:         8.1.0 (8.1.0)
Code Type:       X86-64 (Native)
Parent Process: launchd [235]
Responsible:     Adobe Premiere Pro CC 2014 [1153]
User ID:         501
Date/Time:       2014-12-10 23:51:37.341 +0100
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 5BE9B722-1F73-691F-5EEF-9775088356E8
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000001650
VM Regions Near 0x1650:
-->
    __TEXT                 0000000100000000-0000000100003000 [   12K] r-x/rwx SM=COW /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_platform.dylib       0x00007fff9195abe6 OSAtomicAdd32Barrier$VARIANT$mp + 2
1   libclh.dylib                   0x00007fff9076859f 0x7fff90765000 + 13727
2   libclh.dylib                   0x00007fff90875305 clhCtxCreate + 101
3   libGPUSupportMercury.dylib     0x00007fff94e2daab gldCreateQueue + 651
4   com.apple.opencl               0x00007fff8f68e8ad 0x7fff8f688000 + 26797
5   com.apple.opencl               0x00007fff8f68d32b 0x7fff8f688000 + 21291
6   com.apple.opencl               0x00007fff8f68d211 0x7fff8f688000 + 21009
7   com.apple.opencl               0x00007fff8f6a9fbe clCreateCommandQueue + 150
8   com.adobe.GPUFoundation.framework 0x0000000109afbeb1 GF::CreateOpenCLCommandQueue(_cl_device_id*, _cl_context*, bool) + 65
9   com.adobe.GPUFoundation.framework 0x0000000109ad521f GF::Device::InitializeContextImpl() + 2479
10 com.adobe.GPUFoundation.framework 0x0000000109ad76ae GF::Device::InitializeContext(bool, void*, void*) + 622
11 com.adobe.GPUFoundation.framework 0x0000000109af141a GF::Initialize(bool, bool, bool, void*, void*) + 2154
12 com.adobe.DisplaySurface.framework 0x0000000111bb7f84 DS::Initialize() + 228
13 com.adobe.Mezzanine.framework 0x000000010636c3cd MZ::(anonymous namespace)::FullInitializer::FullInitializer(std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, bool, bool, bool) + 6173
14 com.adobe.Mezzanine.framework 0x0000000106369874 MZ::Initializer::Initializer(std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, bool, bool, bool) + 84
15 com.adobe.Frontend.framework   0x00000001000abe97 FE::Initializer::PrivateImpl::PrivateImpl(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&) + 1479
16 com.adobe.Frontend.framework   0x00000001000aadc8 FE::Initializer::Initializer(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&) + 40
17 com.adobe.Frontend.framework   0x00000001000cdc32 FE::AppMain(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, int, void*) + 226
18 com.adobe.Frontend.framework   0x00000001000d4ea5 FE::Run(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, int) + 581
19 com.adobe.AdobePremierePro     0x00000001000018ac main + 508
20 com.adobe.AdobePremierePro     0x00000001000016a4 start + 52

AND Media Encoder won't start as well!!
Process:         Adobe Media Encoder CC 2014 [1284]
Path:            /Applications/Adobe Media Encoder CC 2014/Adobe Media Encoder CC 2014.app/Contents/MacOS/Adobe Media Encoder CC 2014
Identifier:      com.adobe.ame.application
Version:         8.1.0.122 (8.1.0)
Code Type:       X86-64 (Native)
Parent Process: launchd [235]
Responsible:     Adobe Media Encoder CC 2014 [1284]
User ID:         501
Date/Time:       2014-12-10 23:59:55.226 +0100
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 5BE9B722-1F73-691F-5EEF-9775088356E8
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000001650
VM Regions Near 0x1650:
-->
    __TEXT                 0000000100000000-0000000100088000 [ 544K] r-x/rwx SM=COW /Applications/Adobe Media Encoder CC 2014/Adobe Media Encoder CC 2014.app/Contents/MacOS/Adobe Media Encoder CC 2014
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib         0x00007fff93a9a292 __kill + 10
1   com.adobe.dvacore.framework   0x00000001003a28ea (anonymous namespace)::SignalHandler(int, __siginfo*, void*) + 410
2   libsystem_platform.dylib       0x00007fff9195b5aa _sigtramp + 26
3   libsystem_platform.dylib       0x00007fff9195abe6 OSAtomicAdd32Barrier$VARIANT$mp + 2
4   libclh.dylib                   0x00007fff9076859f 0x7fff90765000 + 13727
5   libclh.dylib                   0x00007fff90875305 clhCtxCreate + 101
6   libGPUSupportMercury.dylib     0x00007fff94e2daab gldCreateQueue + 651
7   com.apple.opencl               0x00007fff8f68e8ad 0x7fff8f688000 + 26797
8   com.apple.opencl               0x00007fff8f68d32b 0x7fff8f688000 + 21291
9   com.apple.opencl               0x00007fff8f68d211 0x7fff8f688000 + 21009
10 com.apple.opencl               0x00007fff8f6a9fbe clCreateCommandQueue + 150
11 com.adobe.GPUFoundation.framework 0x0000000109ef7b01 GF::CreateOpenCLCommandQueue(_cl_device_id*, _cl_context*, bool) + 65
12 com.adobe.GPUFoundation.framework 0x0000000109ed0e6f GF::Device::InitializeContextImpl() + 2479
13 com.adobe.GPUFoundation.framework 0x0000000109ed32fe GF::Device::InitializeContext(bool, void*, void*) + 622
14 com.adobe.GPUFoundation.framework 0x0000000109eed06a GF::Initialize(bool, bool, bool, void*, void*) + 2154
15 com.adobe.DisplaySurface.framework 0x0000000107845f74 DS::Initialize() + 228
16 com.adobe.ame.application     0x00000001000376e7 AME::app::MCInitializer::MCInitializer() + 12039
17 com.adobe.ame.application     0x000000010002323a AME::app::AMEAppInitializer::AMEAppInitializer(exo::app::AppInitArgs&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >&) + 250
18 com.adobe.ame.application     0x000000010000d2ba AME::app::AMEApp::InitApplication(exo::app::AppInitArgs&) + 1802
19 com.adobe.exo.framework       0x00000001057d2bd5 exo::app::AppBase::Initialize(exo::app::AppInitArgs&) + 1141
20 com.adobe.ame.application     0x00000001000167e6 AME::RunTheApp(exo::app::AppInitArgs&, std::vector<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >, std::allocator<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > > >&) + 3270
21 com.adobe.ame.application     0x0000000100047828 main + 440
22 com.adobe.ame.application     0x00000001000032f4 start + 52

Premiere Pro 2.0 Installation Disk Won't Read

I had to re-format my hard drive and when re-installing Premiere Pro 2.0 I found that my installation disk will not read in my DVD drive! Nothing is wrong with my drive. It reads all other DVDs just fine. I get nothing in the directory like the disk isn't there. It's not a disk problem because they have been stored in excellent condition, and not only will the installation disk not run or open, but neither will the accompanying Total Training Video Workshop disks. I am completely dumbfounded. When I purchased this program about 6 years ago off Ebay I had the old 1.5 version on my computer, and had to enter the old registration key along with the new one for 2.0. Is it possible I have an UPGRADE-ONLY copy here instead of the actual full program? It's in the shiny new box and all and doesn't say anything on it about it being an upgrade, so it seems legit. And if it was, in fact, just an upgrade-only program, would that cause the disks not to be read at all in the drive?? I need help on this one because I make my living off editing, and I'm sitting on 3 projects for clients that I cannot deliver on time to get paid, nor have I been able to afford to buy a new CS version.

I have about 8 different burners on my systems, and some will read DVD's better than others will. On my workstation, I have one LG and one Plextor. The LG does the best, and when it fails, the Plextor usually can read. When this happens, I just do a Copy from the drive that can read the disc, to the other drive, using Verbatim, or Taiyo Yuden blank media. If neither can read, I have six others to try. Sometimes, it's just the burner.
One little hint would be to make sure that your burner's firmware is updated to the very latest. That can improve the burner's ability to read from a slightly damaged disc.
Otherwise, contact Adobe. For many programs, they sell replacement media. Do not know if there are version limitations, but one call should give you what is available.
Good luck,
Hunt

Premiere Pro CC 7.2.1 won't import layers of an AI file

I know in the past Premiere Pro wouldn't import a layered AI file, but is that still the case? I can get a layered PSD file to import layers as normal. When I try to import a layered AI file, I don't get the "Import Layered File" dialog as I do with the PSD files; I get a flattened image. Is this a setting I've overlooked or is this STILL not a feature?
Thanks for your help!

No layered import for AI files.
But when imported in Premiere and you want to change something hit Edit Original and the file will open in layers in Illustrator.

Updated Premiere Pro CC and now it won't launch; was working before

I decided to update my Premiere Pro CC and I haven't gotten past the splash page launch ever since. Now, all I get is the splash page for a second and then the Windows alert that it has stopped working. There's not even an "initalizing" log running across the bottom of the graphic. Meanwhile, Audition CC will still open without a problem. As I said, Premiere Pro was working perfectly today before the update.
Things I've tried:
updating drivers
Windows updates
All compatability modes
Deleting program, downloading again and re-installing
Any suggestions? I'm stumped! I'm on Windows 7, by the way.

Type Crash on Launch into the forum search. You'll get all the known fixes.

Premiere Pro CC 2014, plus de moniteur de raccord sous OSX?

Bonjour, je ne trouve plus de moniteur de raccord sous Fenêtre / Moniteur de raccord. A-t-il été supprimé ou peut-on le faire apparaitre différement (avec OSX)?
Merci d'avance pour vos réponses
Mathias

Hello Mark,
Premiere Pro was crashed before the updating 2014.1.
In the "Profile-<user name>" folder in Documents/Adobe/Premiere Pro/8.0 I have just a folder "Win" and that's all, no file inside.
About my graphics card, I have the lastest version : 9.18.13.4052, but the problem is not resolved.

Mail, App Store & Terminal won't open after OSX Mavericks Update

Hey,
Updated to OSX Mavericks yesterday - today Mail started crashing, found a solution but needed to use Terminal - which won't open. I thought OK, I'll reinstall OSX, but can't open the App Store either...
Does anyone know a solution to this one, or have a link to a direct (non App Store) download of OSX Mavericks.
I've tried Safe Boot and didn't help.
Thanks,
Eliot

I went to the Apple Store today and the genius recommended a new install of Mavericks, just do a time machine back up then hold down alt and go to the recovery drive then click reinstall or new install of Mavericks.
Note: This will take a long time it took 3 hours for my machine. When it prompts you to install the back up from time machine I would recommend unchecking the box that asks if you'd like to install with your settings. I have a hunch that what caused this problem in the first place was a corrupted file in the settings. Hope this helps..

My macbookair won't update to OSX maverick. Is it too old? What can I do?

I just tried to upgrade my Macbookair to OSX Mavericks. I get the message "OS X Mavericks cannot be installed on this computer". I purchasd my macbookair in late 2007. So that's it is it? I have to buy a new laptop to make the upgrade? I have upgraded my iMac, so now have it and the macbookair "out of synch" on software updates (e.g. iphoto '11 version 9.5 requires Mavericks, so my iphotos across the two machines are getting out of synch).
Any suggestions other than "buy a new macbookair for Christmas"
Any help most appreciated
Jojn

John Rowlands wrote:
I purchasd my macbookair in late 2007.
John ~ It doesn't make any difference, but according to Wikipedia, the earliest you could have purchased it would have been in early 2008.
John Rowlands wrote:
...in the meantime I'll check the apple store for a new macbookair.
"Before Apple launched the new MacBook Pro with Retina display range we would have whole-heartedly recommended the MacBook Air. However, the addition of the lower priced £1,099 entry-level Retina MacBook Pro means that the Pro laptops are now a much more attractive option." ...Read more in this Macworld article:
Which 13-inch Apple laptop? MacBook Air vs MacBook Pro comparative review

Hi, I am running Mac OS X 10.5.8 (9L31a) Mac Pro. Can I upgrade to enable the new OSX maverick software?

I am unsure about upgrading the OSX 10.5.8 (9L31a) software on my mac pro (2006-7) model. Would or could I upgrade to snow leopard to enable the new OSX Maverick to work on my unit.
Thank you.

A 2007 Mac Pro isn't capable of running Mavericks. The newest OS it can run is Lion 10.7.5; installing it requires going through Snow Leopard or finding a Mac OS X 10.7 install thumbdrive.
(96480)

Premiere Pro(blem) keeps freezing and won't load video!

Once I turn on Premiere and pick my project, it works good.
But when I try to playback the timeline, it shows a message, something like
"Media offline" or "Video offline".
But it shouldn't show it since I haven't deleted the videos,
and I didn't move them.
I used Sony Handycam DCR-DVD110E, I imported the
video into the computer and converted it (into .wmv) using Picture Motion Browser.
So every time I try to do something, I have to select "Replace Footage".
And sometimes it works, sometimes it tells me that the video is "unsupported format or damaged"!
Also, Premiere often freezes. And i need to finish the video soon.
What should I do?

I'm not sure, which of these formats
is the best to work with PrPro?
Convert to MPEG4(.mp4)
Convert to 3gp(.3gp, 3g2)
Convert to Game Psp (.psp)
Convert to MPEG1 (.mpg, mpeg)
Convert to NTSC, PAL DVD mpeg and Burn to DVD disc
Convert to NTSC, PAL SVCD mpeg and Burn to SVCD disc
Convert to NTSC, PAL VCD mpeg and Burn to VCD disc
Convert to Ms Mpeg4 AVI (.avi)
Convert to Divx AVI (.avi)
Convert to Xvid AVI (.avi)
Convert to H264 AVI (.avi)
Convert to Mjpeg AVI (.avi)
Convert to HuffYUV AVI (.avi)
Convert to Swf Video (.swf)
Convert to Flv Video (.flv)
Convert to Gif Animation (.gif)
Convert to Mpeg4 Mov (.mov)
Convert to Apple Quicktime (.mov)
Convert to DV (.dv)
Convert to WMV (.wmv)
Convert to HD Mpeg TS (.ts)
Convert to ASF (.asf)

Premiere pro cc losing audio after save and close

Though I can see the wave form, audio won't play back after save, close and reopening of project. Not every file is affected. If I reimport track, audio will work again, but this is causing me to lose TONS of editing work when I have to start over again and then I'm afraid to close project.
Any ideas?

I am having this same issue in PPro CC. I am editing multi-source material from interviews that were 2-3 hours long. The audio was recorded separately and the wave files ran the entire length of the interview. 44100kHz, 16-bit wav files. It happens after I reopen the project to only some (5%?) of the audio files I imported into the project, not all.
When I re-open the project, the audio data within the wav file will shift forward, so that the back end of the clip will show green/grey diagonal striping signifying the deadspace left when the audio data shifted forward. This is only visible when the entire file is in a sequence. In sequences where it is just a clip from the *shifted* file, the clip will either play dead space if the clip is from the end of the *shifted* file or audio from the wrong part of the file since it's time reference is shifted. The only work around is to import the file again and re-cut, but its killing my work flows. I'm editing 56 interviews, each of 2-3 hours and I can't waste time re-cutting my deliverables each time there's an a revision.

Premiere Pro CS6 6.0.2 hangs on Close Project

I have a project that I was working on today that seems to have somehow become corrupted. Everytime I open it, and then attempt to Close Project, premiere will stop responding.
I've tried creating a new project, and when I import the sequence from the older project file, save, and and attempt to Close Project, premiere stops responding...
A couple of other projects seem fine. So somehow, this project must have become damaged or something.
How can I debug this issue so i can get the sequence back to keep working?
Thanks,
-ken

I was able to find an auto-save version that only lost me some of the work I had done, so thanks for the suggestion.
As I began redoing the lost work, I reproduced the problem. So I spent the last hour narrowing down what is causing it, and have found that an audio track that I am imported will reproduce the issue every time.
I can even start a new project, and import that single audio track, and cause premiere to hang. It's clearly a bug, but I'm not sure how to figure out what's going on.
The track was an MP3, so I brought it into audition and exported it as an AIFF file. But importing that file causes the same issue.
What's the best way to get Adobe to look at this. It's a simple problem to reproduce, and since it causes the app to hang, it probably should be fixed. I also tried to just remove that audio item from the latest project file, but that doesn't help. Once I import the track, any attempts to save the project will result in a hang.
Thanks in advance,
-ken

Premiere Pro CC (7.2.2) won't close on OSX mavericks

Similar Messages

Maybe you are looking for