Premiere Pro CC 8.2 Crashes only with multicamera sequences

After reading all complaints about Crashing, I have to say that I'm very pleased with This version performance, The blue icons Look great.
The software crashes when Multicamera sequences are set to render, and choosing H264 Blu-ray or Quick Time Gopro, in others like Blu-ray MPG2 there is not problem
However I prefer the two codecs with trouble. Also FOUND A WORK AROUND, Is creating the Multicamera sequence, erasing it and using the resulting see in Time line sequence,
and then making the cuts manually, That way it does not crash

I too have problems with audio on CS6.05, I wanted to route my audio thru my digi003 interface, but no avail., tried it on my Presonus light pipe, nada. I have a matrox mojito max and tried to download using it;s vetura capture software, still dropouts. I then went to cineform.com and downloaded the free Cineform Decoder Codec under the downloads file and used it, No more dropouts as of date when using this codec. Its listed as Gopro Cineform 4k/3D/HD codec.
http://cineform.com/gopro-cineform-decoder

Similar Messages

Premiere Pro & SpeedGrade CC keep crashing in Windows 8.1

I just bought a brand new MSI laptop with Windows 8.1 and installed the CC suite. Premiere Pro and SpeedGrade continually crash when I try to use them. Premiere Pro crashes almost every other time I open it. Once it is open it works fine, but almost every other time I start it, I have to close and reopen it. SpeedGrade does the same thing, except sometimes it crashes in the middle of using it, which is VERY frustrating. These are the only programs on my computer that give me problems. The programs are installed to the OS partition on an SSD drive. Below are the error messages I receive for both programs and a copy of my computers specs. Please help me!
Adobe Premiere Pro CC has stopped working.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 7.2.2.33
Application Timestamp: 532c3999
Fault Module Name: GPUFoundation.dll
Fault Module Version: 7.2.2.33
Fault Module Timestamp: 532c367b
Exception Code: c0000005
Exception Offset: 000000000009a8f5
OS Version: 6.3.9600.2.0.0.768.101
Locale ID: 1033
Additional Information 1: 84d7
Additional Information 2: 84d72b4dc5a3d80213c9686cefe70939
Additional Information 3: b9ea
Additional Information 4: b9eab8acd04a6acc51b37ec54653b7b4
Adobe SpeedGrade CC has stopped working.
Problem signature:
Problem Event Name: APPCRASH
Application Name: SpeedGrade.exe
Application Version: 7.2.1.0
Application Timestamp: 53310645
Fault Module Name: StackHash_0ae4
Fault Module Version: 6.3.9600.17031
Fault Module Timestamp: 530895af
Exception Code: c0000374
Exception Offset: PCH_D4_FROM_ntdll+0x000000000009B13A
OS Version: 6.3.9600.2.0.0.768.101
Locale ID: 1033
Additional Information 1: 0ae4
Additional Information 2: 0ae437b0d272d1d0fbcf3609ee0adbe4
Additional Information 3: c92f
Additional Information 4: c92f74bb31cdbacd81a9ea722a9da079
MSI GT60 Laptop:
Intel Core i7 4800MQ (2.70GHz)
16GB Memory 1TB HDD 128GB SSD
NVIDIA GeForce GTX 880M 8GB
2880 x 1620 16:9 3K Display
Windows 8.1 64-Bit

Hi iduno8912,
Very glad your issue is fixed.
iduno8912 wrote:
I fixed my problem! No thanks to the non-existent adobe support team.. Hope this helps someone because you can be sure adobe isn't going to help your ***.
What happened? Did you contact support via Contact Customer Care ? Did you chat or talk with an agent over the phone? If so, please PM me the case number, I'll follow up with the agent to see why they weren't able to solve your case.
iduno8912 wrote:
They can't even make working programs for even the most up to date OS. What a nightmare!
From your description, it sounded like it was a problem with your computer system, specifically your GPUs. What wasn't working from the application side?
Let me know so I can prevent problems in the future.
Thanks,
Kevin

Premiere Pro CC keeps on CRASHING.

I'm having trouble with Premiere Pro CC. (NOTE: The rest of the adobe programs on my laptop including photoshop, indesign, and illustrator are all working smoothly.) Every time I open my media browser panel and try to select video clips to import it just ALWAYS stops responding, crashes, and asks me to close the program. It does that EVERY SINGLE TIME. I'm getting really pissed off and I'm a media student, and I use Adobe almost everyday. I don't know if the fact that I'm only using the TRIAL version of Premiere Pro CC has anything to do with the CRASHING of PPCC, but it really is frustrating. I hope anyone can help me fix this problem.
I'M USING A TRIAL VERSION OF PREMIERE PRO CC (AS OF NOW), BUT DOES THAT HAVE ANYTHING TO DO WITH THE PROGRAM CONSTANTLY CRASHING?

Hello, I am having similar problems. I installed Premiere Pro this morning, started a project and am trying to access files through the media browser, only to have PP crash.
What is the OS and version ? Windows 8
What is the Graphics Card installed on the system ? Looks like there are 2:
AMD Radeon HD 7570M/HD 7670M Graphics
Intel (R) HD Graphics 4000
How much Ram do you have ? 8 GB
Do you use any external Hard Drive ? Only a portable one for backups
Are you using security software e.g. Norton, etc
and
No
if windows, Please check if you have windows defender turned on ? I can't find Defender on my PC
Do you think it is a graphics card issue? Thanks

Premiere Pro CC 2014.2 crashes when "locating media"

The problem;
Premiere Pro CC 2014.2 crashes when "locating media". I am working on a project that has not given me any problems for the last 200 hours. About a week ago I notice that the .proj file size was 276mb and found this odd because my largest project to date was never larger than 80mbs. I thought that the premiere was running slow because of the project size. As luck would have, when my client made their their final changes 2 days ago, I opened the project and premiere would hang on the locating media window and then would crash. I called Adobe and spent an hour on the phone with them to no avail.
Project workflow
- 700gb of 5d footage
- 20 sequences under 5 minutes
- Dynamically linked files with AE
- Warp Stabilized about a dozen clips of under 5 sec
- On every sequence color correction adjustment layer with RGB Curves, Three way color corrector and sharpen filter
- I kept old versions of the sequences (I was in version 5 before the crash)
What I have tried;
- Unsuccessfully tried to open auto-save files for this project.
- Successfully opened other older non relevant project
- Removed Mercury playback engine in the project settings
- Cleaned out media cache database through pp in media Preferences
- Manually deleted cache files in /Common/Media Cache Files and /Common/Media Cache
- Tried importing sequences into new .proj file; it would crash as a result.
What "worked".
I was able to open it on another computer. save it under another file name. bring it back to my original computer and open it without problem. I lost about 3 days working through this problem, I missed my deadline. and angered the client. I was able to use a friends IMAC to "fix" the problem, however I can't always count on him being there if it happens again.
Questions.
- What the hell happened? Why could I open it on one computer and not on the other?
- Is there a way to fix a corrupted .proj files on a PC?
- What should the average file size be, before it becomes unstable? (I'm pretty that my file size was bloated by all the previous versions of the sequences)
Windows 8.1 64bit
Premiere 2014.2
Intel Quadcore i7-4770 3.40GHz
16gb Ram

Hi,
I would suggest the following steps:
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
Run a disk permission repair on your boot drive, and
Reset Home Folder permissions and ACLs Error | Apple Support Communities
Thanks,
Rameez

I just installed Adobe CC Premiere Pro and it continuously crashes!

I just installed Adobe CC Premiere Pro and it keeps crashing. I've tried creating a new project, opening an existing project -- nothing works. I can start a new project and get as far as to import clips into the project window but the moment I try to play a clip or create a sequence from it, it crashes. I'm running off a brand new laptop (Lenovo X1 carbon 3rd gen) 8Gb Ram, i5 processor, best of anything I could get on this specific machine. Any thoughts??
The files I'm opening with a new project are MP4 files from a gopro camera. The existing project was a CS5.5 file that it attempted to update to CC -- it actually located all of the files fine and as soon as it gets to the workspace with everything laid out, it crashes. Let me know if I can supply any more information.

I just posted Im having the same issue.
Premiere Pro 2014.2 is crashing
I love PPRO 2014 very much but, wrote an nasty gram to Adobe because each update seems to have issues.
I have set my autosave to 5 min saves and each time I see it say AUTO SAVING I use it as a reminder to do a real save.
I have a super system and it didn't use to crash like this every hour.
Why not try it out for a year and do a major update vs little updates that have issues the last 3 times.
I can't render either with the hardware setting, which did work for a year then, the latest update screwed that up.
The Adobe Tech blamed it on Apple but, hey - it worked for a year until Adobes update.

Installing Premiere Pro 1,5 on a PC with windows 8. How do I solve it?

Installing Premiere Pro 1,5 on a PC with windows 8 failed. How do I solve it?
I should mention it is about 10 years old and Adobe cannot help they say!
Regards
Lars-Erik Eriksson/ Rydöbruk Sweden

You will not be able to install your original, read below
CS2 (and earlier) Activation Server replacement software
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
When you install the special version of PPro2 on a Win7 or Win8 computer, you MAY need to right click the program icon and select WinXP compatibility from the option popup... AND Vista problems https://forums.adobe.com/thread/416347

Premiere Pro CS 4.1 Crashes at Startup While Loading NI's VST's.

Premiere Pro CS 4.1 crashes at startup while loading Native Instrument's VST's. My work around is to move the VST folder off the Plug-Ins directory, but that is a pain because I have to do it everytime I wanna use Premiere. In all honesty, I use my audio apps a lot more than Premiere. Any help would be great.
System Specs...
MacPro
Mac OsX 10.5.7
Premiere Pro CS 4.1
4GB RAM

With your VST folder in its proper place, try launching and re-launching Pr. Theoretically, every time it fails to start the plug-in that caused the problem should be automatically blacklisted. Sooner or later, all of the VST plug-ins that cause problems will be blacklisted and Pr will start normally.
That's the theory, anyway.
-Jeff

Premiere Pro Does Not Support Audio-Only Capture For Some Formats, Such As HDV?

In the PPro CS 5.5 Help file under, "Recording audio", it says:
"Note: To capture an audio-only file from a digital video source, choose Audio from the Capture menu in the Logging pane of the Capture panel.
"Premiere Pro does not support audio-only capture for some formats, such as HDV."
I'm shooting in HDV and if I want to capture audio only, would I just need to switch my setting to DV?
The only thing is my Canon HV20's HDV audio is MPEG-1 Audio Layer 2, 16 bit, 48 kHz.
My DV setting is PCM audio, which I think is a better quality format, right?
Would there be any noticeable difference?
Thanks.

Capture your HDV material in the normal way and just drag audio only from the source monitor to the timeline.

Premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?

I can open a project, import files or other projects, but when I want to play the sequence the program stops working and closes. When I try to save the project or close the program I get a "software not responding" message.
I hope someone can help me with this as I cannot work on any projects.
thanks.

Hi john,
thanks for taking the time to help me. I have updated the software and rendered the files and now I am able to play them, but still neither the sequence nor the clip play/show on the corresponding screens, I can only hear the audio file. I also continue having problems when saving the project, the software stops working and I get the "non responding" error from microsoft.
As you suggested, and I have to say I am pretty much a dummy with the codecs and alike, I installed the mediainfo and run one of the files.
This is the info that appears on the screen
I am not getting any error messages from Premiere, so I am kind of stock. If you need other info let me know.
Thanks for your help and patience.
Arantza
Date: Mon, 23 Apr 2012 09:12:15 -0600
From: [email protected]
To: [email protected]
Subject: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    Re: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    created by John T Smith in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037What is a CODEC... a Primer http://forums.adobe.com/thread/546811What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037.Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing.For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/enFor Mac http://mediainspector.massanti.com/.http://blogs.adobe.com/premiereprotraining/2011/02/red -yellow-and-gree n-render-bars.html.If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs.Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project.H.264 will NOT work inside an AVI http://forums.adobe.com/thread/854115.More information needed for someone to help... click these links and provided the requested information-http://forums.adobe.com/message/4200840-http://forums.adobe.com/thread/416679.For CS5 and later, the easy way to insure that your video and your project matchSee 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4354727#4354727
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4354727#4354727. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Is there anyway to have Premiere Pro recognize the "in" & "out" points and the sequence's "home" (first frame) as edit points so that the up & down arrow work as short cuts on these areas?

Is there anyway to have Premiere Pro recognize the "in" & "out" points and the sequence's "home" (first frame) as edit points so that the up & down arrow work as short cuts on these areas?

Hey guys, I wrote a big long speech trying to be more clear and was just getting more confusing. LOL
Hopefully this image makes my question a bit easier to understand. In green you can see how the up and down arrow keys land while in Final Cut. In red how they land while in Premiere. I'd like them to land like Final Cut. Thanks!

Imported avi crashes premiere pro cs4...sound only on windows movie maker

Hello all,
So when I go to import an avi it just crashes premiere pro...but first it turns into a sound only file, then crashes. With windows movie maker it only plays the sound?
Anyone else have these problems? I don't really want to use other video editors...
Oh and I'm running Vista.
Suggestions please.

I'm sorry I don't have a quick answer.
From what I can tell
- Vista X64 uses MovieMaker 64bit
- MovieMaker 64bit requires 64bit codecs (I think there is an experimental 64 bit ffdshow on sourceforge that might work)
- However installing 64bit codecs may stop your 32bit video apps from rendering properly.
I didn't provide links to the experimental ffdshow build cause I didn't try it myself.
If I were you, I'd give up on getting Movie Maker working for now, and just focus on Premiere pro. ? Since it is a paid application they should provide good support. You can't be alone with this issue. If they require codec information just tell them it's a H.264 video with PCM Audio in a AVI wrapper. Guess a quick snapshot video could be provided if they needed one.
ps.
. I'm just a user, not affiliated with Creative)
(pss... I use Vista x64 as well, and do not get video in moviemaker either)

Premiere Pro and Media Encoder crash while rendering H.264

Very recently, a problem's popped up where Premiere Pro and Media Encoder (CC) will crash while rendering H.264.
It's only while rendering H.264 - other formats seem to work fine.
And I don't mean that it returns an error, I mean it hard crashes with a Windows "Adobe Premiere Pro CC has stopped working" popup.
It doesn't crash at a consistent time during the render, even on the same project. Occasionally, it won't crash at all, but this is usually not the case.
I've tried disabling CUDA and my overclock to no avail. Please help!

On the topic of opening a project on the exact same version of Premiere Pro CC 2014 (yes it is definitely up to date, and the 2014 version), to overcome this export crash problem that ZachHinchy has brought up - you can't. Technically speaking, one should easily be able to open a Premiere Pro CC 2014 project from one system on another system running the exact same up to date, legitimate version of Premiere Pro CC 2014 without any kind of error. But for some reason, this has been disallowed(?) by Adobe. It has facepalm written all over it. Does anyone agree that this is at least a little bit silly?
I have tried exporting a Final Cut Pro XML from my project to try and open the sequence at uni on a Mac, so I can render my project when I finish my edit. It half works - the clips are there, but the sequence is gone - i.e. 12 hours of painstaking sequencing and micro-edits that had me at several points in time wanting to insert my hand through my monitor with enough force to make a large hole. I really cannot afford redo this sequence, as my assignment is due tomorrow, and I have to work at 6 oclock in the morning, so I also cannot afford to stay up till the early hours of tomorrow morning. Wish me luck that some miraculous event has taken place overnight that will somehow allow me to just open my project, on the same version of Premiere, on a Mac, without hassle. (Apple OS is not friendly to anything but its own selfish nature, so I am having doubts).
Adobe please, if you can do anything at all to help, you will save my assignment, and my faith will be restored. Otherwise, I'll just get my money back and buy Final Cut instead.
I cant even
If I find a way to fix either of these problems, I will post straight away.

Premiere Pro CC 2014.2 - Crash when dragging videofile into timeline

Hey guys,
when I try to drag a image or videofile (doesn't really matter which fileformat, codec or length) into a sequence Premiere Pro CC 2014.2 will crash immediately, without a warning. Just the usual "Adobe Premiere has stopped working" in Windows 7.
I'm using Windows 7 64-bit with 4GB RAM, Intel Core i3-4130 COU @ 3,40 GHz and a Intel HD Graphics 4400. Premiere Pro worked seamlessly just days before, without any change to the system. The error occured in Premiere Pro CC 2014.1 too. Maybe it's a problem with the video preview? Music files are no problem.
Thanks in advance! Need help asap. customers are waiting

Solution:
My graphics card did not supported the "Mercury Playback Engine GPU Acceleration (Open CL)". You can change it into "Mercury Playback Engine Software Only" in your Project Settings.
But this is in the wrong place in my opinion. Why not in "Edit/Preferences"? I could've changed it by myself but I did not find the menu.
Thanks Michaela from the Adobe Support Chat!

Adobe premiere pro cc 2014 - constantly crashing

Naturally, my project is under deadline..
My system is running OS X 10.9.4 (13E28)
late-2012 MacBook Pro Retina
2.6 GHz Intel Core i7
16GB 1600 MHz DDR3
Intel HD Graphics 4000
NVIDIA GeForce GT 650M
768Gb Flash Hard Drive
My project consists of DSLR footage (h.264 compressed files) and Zoom H4N Audio (.WAV files)
Even after spending most of Thursday and Friday on the phone with Adobe support; deleted all files from media cache, re-imported project, waited for premiere to re-conformed footage, etc..
...I still find my project loading sluggishly.. like it takes 15 minutes until video clips in the sequence will fully loads & appear in the project window... it becomes momentarily operable before quickly becoming inoperable as the video and audio no longer playback or respond to the cursor.
At that point (when playback no longer works) I can still save the project.
It seems as though the software loses the dynamic link between the footage as it completely goes black.
Then when I try to exit Premiere CC 2014.. the program locks up and crashes with no report.
The crash reports I have are from a few days ago when they first began and before they stooped generating reports.
Majority of the errors were:
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: EXC_I386_GPFLT
It also crashed a few times with the following errors:
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_PROTECTION_FAILURE at 0x00007fff5fbfdef0
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000018
Any help would be greatly appreciated!

First I must say.. ADOBE PREMIERE PRO CC 2014 is glitchy as hell (and in my three weeks editing a documentary or rather two weeks bc I lost an entire week due to this issue) I have come to learn and identify some workaround solutions..
Here is what I originally wrote after speaking to five different Adobe engineers...
It is only an issue with PrCC2014 and the temporary solution before the upcoming update is to...
1) Go into Preferences... Audio... and UNCHECK the box next to "Maintain pitch while shuttling."
[this is a new feature in PrCC2014 that is processor intensive, causes audio dropouts, and is a major player in why the playback suffers]
2) Go into your sequences settings for each sequence you have for DSLR footage and change the Editing Mode preset to "CUSTOM"
3) Next scroll down to Video Previews and change the preview file format to "QuickTime" and the codec to "Animation."
4) Uncheck the box next to "Composite in Linear Color (requires GPU acceleration or max render quality).
[this is another new feature that is also processor intensive & is also a key suspect to the problem]
THE KEY TO FIXING (temporarily) THE BEHAVIOR
When your computer begins to show signs of the glitchy - sluggish playback behavior..
Stop.. go back into your SEQUENCE SETTINGS and change it to a different EDITING MODE (only temporarily) and click OK.
You could change yours from ProRes to CUSTOM (as indicated in step #3)
Next a prompt will pop up asking you...
Click okay then immediately go back to SEQUENCE SETTINGS and change it back to your original setting, in your case, ProRes.
Somehow, by DELETING those PREVIEW FILES it essentially resets the issue... until the dreaded glitchy behavior returns.
I have had luck with this trick and hopefully you will too..
Cheers!

Premiere Pro CC 2014.2 Crashing while loading project...

When trying to open Premiere project the program opens and looks like it will load and then crashes.
If I create a new project Premiere opens and I can import footage but as soon as I try to play footage in the preview window or drop it in the timeline the program crashes as well.
I am working on a Windows 7, 64-bit, i7, 8GB ram, 1TB multiple partitioned hard drive. My Graphics card is, Intel(R) HD Graphics 4600 - Driver Version: 9.18.10.3204
My Error Log is:
Faulting application name: Adobe Premiere Pro.exe, version: 8.2.0.65, time stamp: 0x5486db4a
Faulting module name: MXF_SDK_4.4.33_vs10.dll, version: 4.4.33.0, time stamp: 0x534d772c
Exception code: 0xc0000005
Fault offset: 0x00000000000bdc55
Faulting process id: 0x378c
Faulting application start time: 0x01d02c3625e455c1
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
Faulting module path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\MXF_SDK_4.4.33_vs10.dll
Report Id: b1b66e81-9829-11e4-95ce-c4346b64bc4f
I can't figure out what the faulting module is.
I just installed CC 2014.2 3 days ago. It all worked fine until yesterday when Premiere started crashing. I restarted the system - same issue. I uninstalled and reinstalled Premiere2014.2 - same issue. Premiere seems to be the only faulting application. Everything else (Ps, Ae, Lr, Id, Au, Ai) appears to still be working.
My version of CS6 (Purchased before getting a creative cloud membership not downloaded through CC) is also still working properly.
Thanks for the help.

Update: I updated my Graphics Card Driver to a more recent version. Restarted computer and reopened Premiere and similar crash happened. I went through to get some more crashes and had different crash reports. The faulty module is not always the same.
Problem Event Name:                        APPCRASH
Application Name:                             Adobe Premiere Pro.exe
Application Version:                           8.2.0.65
Application Timestamp:                     5486db4a
Fault Module Name:                          devenum.dll
Fault Module Version:                        6.6.7600.16385
Fault Module Timestamp:                  4a5bded7
Exception Code:                                  c0000005
Exception Offset:                                00000000000016a0
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             1033
Additional Information 1:                  ec5a
Additional Information 2:                  ec5adb2545b190cc19da7bdfa78d5bf1
Additional Information 3:                  6e59
Additional Information 4: 6e59168cf9de1a4a9616903b4a4ba1e1
Problem Event Name:                          BEX64
Application Name:                             Adobe Premiere Pro.exe
Application Version:                           8.2.0.65
Application Timestamp:                     5486db4a
Fault Module Name:                          OpenCL.dll_unloaded
Fault Module Version:                        0.0.0.0
Fault Module Timestamp:                  50eb1a5b
Exception Offset:                                000007fee84516a0
Exception Code:                                  c0000005
Exception Data:                                   0000000000000008
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             1033
Additional Information 1:                  a527
Additional Information 2:                  a527a6af76c2b04cfd1fc255c66e5364
Additional Information 3:                  21c7
Additional Information 4:                  21c71ffc516aa3806e495b8080bd51fe
Both of those are different from the original posted report.
I did have some success following these instructions.
Premiere Pro CC 2014.1 has stopped working - Win 7 64 bit
It appears I do not have a graphics card that is compatible with the mercury engine. I have had three successful tests and one crash since I selected Renderer: "Software only"
I plan to upgrade to a Nvidia card or the supported Intel Iris Card.
This seams to be the issue but I am hesitant to use CC 2014.2 for the time being because I don't know if it will crash randomly and CS6 is working fine. The second error code with "Fault Module Name: OpenCL.dll_unloaded" seems to be directly related to the graphics card and rendering processes. I will update as I learn more.
Please comment with any suggestions or resolutions you have had.

Premiere Pro CC 8.2 Crashes only with multicamera sequences

Similar Messages

Maybe you are looking for