Premiere Pro CC and missing audio tracks for .mts files

Hello guys,
I used to edit my .mts files with Premiere Pro CC without any issues until yesterday.
Now I import my .mts file (made with a Sony VG900) but Premiere doesn't recognize the audio tracks (that I can hear just fine with VLC).
I tried changing the extension in .m2ts but it didn't work, I also tried reinstalling Premiere but, again, it didn't work and I tried (I was desperate) to install Premiere CS6 just to check if maybe the problem was just about the CC version. Guess what? It didn't work...
I tried also converting the file with Encoder in .mp4 but after the conversion I can't hear the audio with VLC and, of course, it doesn't work on Premiere.
Do you think it's a Premiere issue or a file problem?
I used those same files for other videos (like this one http://www.youtube.com/watch?v=H1X5vsZ-5yI) and I had no problems. Then I updated Premiere, I moved the files in other folder and the problem came to life.
Any idea?
(I'm waiting for my colleague to send me a new mts file just to check if I accidentally damanged the old ones).

A similar problem here..... although......
Take a look at this screenshot
As you will see, the blue marked audio is repeated audio of less than on sec. Certainly not the way it has been recorded.
I think I've got the answer........ (working with Premiere Pro CC, always up to date, Mac OX 10.9.2; Camera: Sony HXR NX3)
1. Don't copy but clone your flash card to the location where to edit on your hard drive. At the same time: alt+click on external flash card, draw it onto your hard drive location.
(or use carbon copy cloner, which I use for backup and transferring avchd files).
2. Don't import regularly via the import dialogue box (cmd-i). Instead: use the mediabrowser browser, locate the map "private" (as often standard named),
3. Via cmd-a (select all): select all videofiles.
4. click right mouse button and select import.
This way, all the video and audio files will be imported.
If however you have alreade re-used your camera flash card for recordings and don't have access to the 'corrupted' files to be imported into your project, you won't be able to solve the problem. You just lost some of the essential data which were not copied onto your Mac.
This solution I found for my problem may well be the one you are looking for........
Another solution might be to convert the compressed avchd - before importing into your project - into uncompressed .mov filed. However...... you will lose data so this is not exactly what I would prefer if the former described workflow does fix the problem for you.
Please let me know if this works for you or not.
Good luck!
Regards,
Peter

Similar Messages

  • AME-o Audio recognized for .mts files

    Really drives me crazy.
    I am sure there is audio with this .mts file. But AME cann't recognize it. No issues for video clips in other format.
    My AME version 6.0.0.382 (64-bit). And the source file here. Pls help
    http://youtu.be/6RXcFHpNWUU 

    I am having a similar problem: trying to ingest Sony HXR-NX5E .mts- files, and cannot get the audio. Plays with VLC-player. Log file shows the error message:
    Dolby Audio Decode Licensing Restriction for /Volumes/NO NAME/PRIVATE/AVCHD/BDMV/STREAM/00034.MTS
    This installation does not have a license to decode Dolby Digital audio.
    Updated to latest versions yesterday.
    Trying to avoid the problem by setting the audio to PCM in camera, but I would be pleased to see issue fixed.

  • Premiere Elements 13 (not Pro), recorded a video with mono mic input (left channel only), need to create 2-channel (left and right) audio track for finished product. Help?

    The question says it all. I have been all over the tutorials as well as the menus inside Premiere 13 and cannot find how to edit the audio track beyond basic balance, volume, etc.
    I can see the Audio 1 track, shows audio in left channel only, but it will not respond to attempts to select, cut/copy, paste, etc.
    Basically I just want to turn one-channel audio into two-channel audio.

    25424...
    Sure you do not want to give the Fill Left and Fill Right another try?
    According to the Adobe document Adobe Premiere Elements Help | Effects reference
    Fill Left, Fill Right
    The Fill Left effect duplicates the left channel information of the audio clip and places it in the right channel, discarding the original clip’s right channel information. The Fill Right effect duplicates the right channel information and places it in the left channel, discarding the existing left channel information. For example, you might use this effect on footage shot with a monaural microphone plugged into only one channel of a camcorder, extending the voice of a speaker from one channel to both.
    From what you wrote, your Premiere Pro video seems to be saying the same.
    If that Premiere Elements Fill Left or Fill Right is no go, you might want to explore what you can do in this regard using the free audio editor Audacity.
    Audacity: Free Audio Editor and Recorder
    And, then import the Audacity edited audio back into Premiere Elements project as source media.
    Is the speaker system OK?
    We will be watching for your results.
    Thanks for the follow up.
    ATR

  • Premiere Pro 6 and Audition Audio issues with Kona Lhi

    Hello,
       When I have Adobe Premiere Pro and Adobe Audition open at the same time, and I send an audio clip from Premiere Pro to Audition for editing, I have no sound in Audition. If I have only one of these programs open, the audio works fine in both. Since these programs are linked together it is essential that I have audio in both, even though, both programs are open. Is there a driver fix or some other way to get Premiere Pro to release the Kona Card LHi when switching to Audition? I am using a Mac Pro 2 x 2.4 6-core 24MB Ram 1333 DDR3 and Quadro 4000 with Kona Lhi Drivers 10.4.4 with Adobe presets.
    Thanks,
    Dunamis Starr | TV Department

    Hello Dunamis,
    Unfortunately this is a known issue with the Kona card. I know this is something they would like to fix but I'm uncertain on the timeframe. 
    There are times when this workflow will work without issue but when it goes into the bad state you will need to quit the apps.
    Peter Garaway
    Adobe
    Premiere Pro

  • Premiere Pro CS6 not playing audio on imported MP4 files.

    I am editing a series of MP4 clips shot with a Canon Vixia, and for some reason, Premiere Pro CS6 will not play the audio on a few of the imported files. All of the clips were videotaped with the same camera. I know that there is audio on the clips in question, because it works fine when they are opened in Windows Media Player. I have deleted and reimported the faulty files, to no avail. I noticed in the online discussions that several others have had this problem; but I haven't been ablet o find an online fix thus far. I would greatly appreciate advice on this!

    I have a Canon Vixia HFS100, which saves AVCHD files to an SD card... exactly what model is your camera?
    If you are copying from an SD card to your hard drive, read these two links
    Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
    -and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html

  • No audio track from .mts file created with panasonic camcorder

    I am running windows 7 and adobe premiere 6.  I have a few .mts files recorded using a panasonic hmc camcorder.  These videos played fine with sound on the computer. But once they are imported into premiere, there is no audio, in fact the track is missing.  Does premiere not support .mts files? Is there a way to convert them into a format supported by premiere?

    Is the audio recorded as multi-channel?  Is it PCM or Dolby?  Try importing clips from the camera that have stereo audio.  If it turns out that multi-channel audio is the problem, load the clip into Audition (if you have it) and process it there.  If you don't have Audition you could try the open-source program Audacity, but I don't know how well or even if it supports multi-channel audio.
    Jeff

  • Missing audio track when importing video into Premiere Pro CS3

    When I import my M2TS video into the editor there is no audio when viewed in the source.  There is also no audio track when I drag a clip down to the timeline.  Any fix for this?

    I have the same problem with M2TS files in Adobe Premiere Pro CS4. The audio track is there - Adobe Premiere just doesn't recognize it. If you open the same clip in Nero Showtime, Corel Ulead VideoStudio, etc., the audio will be there. The audio is probably multiplexed.
    I have been recording High Definition TV using the Hauppauge HD PVR 1212. About 15-20 % of the M2TS files recorded will be seen as video only clips by Adobe Premiere. The remaining clips will be conformed by Premiere and you will have a Dolby Digital 5.1 audio track. If you convert the video only clips to .MP4 and then re-import them into Premiere you will then have the Dolby Digital 5.1 audio track back and you're good to go.
    I use either Xilisoft or Arcsoft media converters to change to .MP4 files. If you use Arcsoft you will have to render the clip. The files converted by Xilisoft don't have to be rendered for playback.

  • Premiere Pro Does Not Support Audio-Only Capture For Some Formats, Such As HDV?

    In the PPro CS 5.5 Help file  under, "Recording audio", it says:
    "Note: To capture an audio-only file from a digital video source, choose Audio from the Capture menu in the Logging pane of the Capture panel.
    "Premiere Pro does not support audio-only capture for some formats, such as HDV."
    I'm shooting in HDV and if I want to capture audio only, would I just need to switch my setting to DV?
    The only thing is my Canon HV20's HDV audio is MPEG-1 Audio Layer 2, 16 bit, 48 kHz.
    My DV setting is PCM audio, which I think is a better quality format, right?
    Would there be any noticeable difference?
    Thanks.

    Capture your HDV material in the normal way and just drag audio only from the source monitor to the timeline.

  • Have premiere pro cc and do not have the tracking mask feature. Yes I have updated. Thanks

    Have premiere pro cc and do not have the tracking mask feature. Yes I have updated. Thanks

    I thought i had done this. If I am doing something wrong please advise what I need to do.
                                                                                                                                       Thanks for the help.

  • We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder? Thanks! bedrijfsfilm Companyfilms

    We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder?

    We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason
    Anyone else got that too with Premiere Pro CC and the new Media encoder?
    Lack of detailed info makes your question impossible for anyone to answer you!
    eg. ...."Doctor it hurts...anyone else got something that hurts?" 

  • Premiere Pro CC7 and CC6 will not put video or stills onto time line for editing.

    Premiere Pro CC7 and CC6 will not add video or stills onto time line for editing. It wil play the clip but that's it.  I have tried many different vidoe files, mov, avi and others plus jpeg stills, but no matter what i do i cannot move it to time line to edit. I have the 30 day trial version. I have watched the tutorial, done same thing, no luck.
    Any ideas and help appreciated  otherwise I 'll just  bin the whole program. I have tried it on Final Cot pro 7 and there is no problem (thats on the mac, the premiere pro is on pc. )

    Chances are you just need to create a sequence to put them on.
    FAQ: How do I choose the right sequence settings?

  • I have premiere pro cc and i can't put the speech analysis models spanish for adobe premiere pro cc

    I have Premiere Pro CC and I can't put the Speech Analysis Models Spanish for Adobe Premiere Pro CC, they're installing on the folder CS6 and when I try to analyze it only appears on english... If anybody can help me

    the messsage is for forum housekeeping and is not a message directed to you.

  • Any free way to encode 5.1 audio track for DVD?

    Besides the limited 3-use SurCode for Dolby Digital that comes with Premiere, is there any free way to encode or convert a 5.1 PCM WAV file to a surround format for DVD?
    Thanks!

    I can't find the post, but I saved it...Here it is:
    Like most of you, I was annoyed to find out I couldn't create AC3 surround sound files with my CS4 software, and also that we got downgraded from Audition to Soundbooth. We all paid a lot for it! I know many people have ranted about that already, so enough said.
    Here is a workflow that gets around that problem without ponying up for the SurCode Plug-in, and/or buying Audition!
    To convert your mixed 5.1 audio, or stereo audio, to the DVD standard AC3 file that Encore wants, download the latest version of Audacity here:http://audacity.sourceforge.net/  It is available for Mac OS X, Microsoft Windows, GNU/Linux, and other operating systems.  If you don't know already, it's free!
    Now, before I start getting flamed, about Audacity, it works great!  The UI is not the most modern, but the quality is top-notch.  I've used it for years and most complaints about it are unjustified.
    You'll need to download the latest version: "Beta: 1.3x - for advanced users."  There will soon, I hope, be an Audacity 2.0 stable release. Until then, use the Beta release for this workflow.
    Note:  I'll focus on Premiere Pro CS4, because that is where I originally troubleshooted this, but something similar will work for the other Adobe products that use sound.
    Workflow:
    Create your mixed 5.1 surround sound audio in Premiere, and output the audio only by going to File > Export > Media, and selecting "Windows Waveform" as the output.  You should only have "Export Audio" checked.  Verify the format in the Summary section. You should see something like: 48000 Hz, 5.1 Surround, 16 bit.  Now under Audio codec, make sure "Uncompressed" is selected.  Click Okay, and Adobe Media Encoder should launch.  Click "Start Queue" and your audio file will be created.  You'll get an interleaved 6 channel wave file.  Not all applications will open it, but Audacity will.
    Note:  When you mix your surround sound in the Audio Mixer, you'll place your little "Puck" where you want the sound to come from.  Picture yourself in the middle of the "dish," if it's a puck, isn't it in a rink, as in hockey rink...ah, but I digress.  Anyway, you'll notice that volume meters in the 5.1 (6 channel) Master section are laid out in the following order: L,R,LS,RS,C,LFE.  Also, if you open a 5.1 audio file in the Source panel, you'll see the same order from top to bottom: L,R,LS,RS,C,LFE.   Soundbooth also does it that way.  Ahh....Adobe...nice try.
    The actual channel order should be L,R,C,LFE,LS,RS.  That's the order that you'll probably have to assign in the "Audio Output Mapping" section in the properties menu to get your channels to play correctly with your surround sound hardware. L,R,C,LFE,LS,RS is also the order that interleaved files use.  So after you create your 5.1 file, and open it in another audio program that displays them in the "proper" order, like Audacity, you'll see your tracks laid out from top to bottom in that order.  I'm not sure why Adobe does it that way, but oh well.
    Surround sound primer:
    The LFE channel is not, despite popular misconception, a subwoofer channel.  Bass from all the channels in a surround sound Amplifier is summed and sent out to the Subwoofer.  The LFE channel is supposed to be used only for very low frequencies, to create extra  ...oomph.  I think that is the technical term.  It is not supposed to be used for bass frequencies from the other tracks.  It is for explosions, dinosaur footsteps, ...etc.
    Audacity will open DVD ".vob" files, and even let you select which stream (usually Language) to open.  As an example, open up a movie with some action in it like Ironman (The movie starts at "VTS_03_1.vob") and look at the LFE channel.  It's the 4th track from the top in Audacity.  You'll see it's silent except at parts where there is thumping AC/DC music at the Intro, or explosions.  It's not used as a subwoofer channel!  
    With that in mind, you may have noticed, unless I'm missing something, that there is no way in the Premiere Mixer to assign an audio track only to the LFE channel.  Sure, you can dial up the "Bass Clef" knob to 0.00 db, and send a mono channel's audio to the LFE channel, but there is no place to put the "Puck" that only outputs to LFE.  There is one for the center channel, but without someplace to put it, your 40 Hz dinosaur footprint "Thump" is going to also be assigned to some of the other channels.  Which channels depends on your "Puck" placement.  This is not correct.  Again, unless I'm missing something, Adobe needs to correct this oversight.  We'll get back to this problem with a solution later, but first let's continue with the AC3 issue.
    At this point you should have your wave file.  If you want to apply any global changes to all 6 channels, you can open it in Adobe Soundbooth and trim the beginning or end, and apply effects to the entire file.  You cannot, however, make changes to individual channels.  Audacity will!  We'll get to that later.
    Encode with Audacity:
    Install the software and go to Edit > Preferences > Libraries, and click on "Download" for the "FFmpeg Library."  This is the library that Audacity will use to create the .AC3 file.  Once installed, the library version should show up next to "FFmpeg Library Version" While the "Audacity Preferences" window is still open, select "Import/Export" and select "Use Custom Mix", this is used to export a 5.1 channel file.  Now you're ready to open your .wave file from Premiere.  Drag and drop it in the Audacity workspace and you should see 6 mono tracks laid out from top to bottom in the following order: L,R,C,LFE,LS,RS.  Audacity will let you edit the individual tracks, unlike Soundbooth, thanks Adobe.  But for now, we'll keep it simple.  Set your "Project Rate" in audacity in the lower-left corner to what you want the AC3 file to be.  For DVD, chose 48000 (Hz).  If you leave it at 44100 (Hz) Encore won't import it.
    Your almost done.  Now let's export the file.  Go to Files > Export... > and select "AC3 Files (FFmpeg)" in the "Save as type:" drop-down.  Click the "Options..." button and set the "Bit Rate:" for your file.  For 5.1 AC3 audio, probably 448.  Now enter a file name and click "Save."  This will open the "Advanced Mixing Options" window.  This allows you to re-map the tracks to a different channel order.  It should be correct, and it should show "Output Channels:" set to 6.  Press "OK" and you're done.
    Presto, you have a 5.1 channel AC3 file.  Use that in Encore, or whatever DVD creation program you use, and when you play your DVD you'll have full 5.1 audio coming out your surround sound Amplifier.  That is if you have one.
    Test your file:
    If you want to test your file, you can do a couple of things.  Since Soundbooth and Adobe  Bridge won't even open AC3 files, and Encore will open but only play the Left and Right channels in the preview, you'll have to either import the file into Premiere, or use another media player.
    If you got Premiere to play your surround properly, then you can drag and drop the file into the "Project" panel and preview it from there. You will hear all 6 channels in the correct speakers, but I did notice that the quality is not very good.  Maybe Premiere doesn't decode AC3 all that well.  I heard some crackle that isn't in the file.  How do I know it isn't just a bad encoding job by Audacity?  Because I played the file with the VLC media player, and Cyberlink PowerDVD on the same computer, and also on a DVD in my home theater system with no artifacts.  Maybe Premiere doesn't decode AC3 files well.
    The VLC player, will play almost any file in the known universe, and at least on my computer, it automatically played the AC3 surround file, created by Audacity, with all the channels mapped correctly.  That's right, full surround out my speakers with only default settings.  It's a great player.  Get it for free here: http://www.videolan.org/
    Test with Encore:
    So far so good. Now open Encore, drop the AC3 file in an empty project, throw it on a Timeline and build the project without Video,  It will autoplay without a menu this way. If you set the End-Action to the same AC3 file it will repeat continuously.  Either burn this to DVD-RW and test it in your DVD player, or better yet, Build the project to a DVD Image instead, and mount it in a virtual DVD   Drive with a program like "Virtual CloneDrive."
    If you don't know what that is, or how to do it, it is very simple.  Go to:http://www.slysoft.com/en/ and download "Virtual Clonedrive."  It is free.  It tricks your operating system into thinking you have another physical DVD drive.  In fact, it can create up to 8 virtual drives.  Now you don't have to waste time burning, and erasing DVD's every time you make a change to a project.  You can build your project as a DVD Image from Encore, save the .iso file to your Desktop and "mount" it (load it) in Virtual Clonedrive.  You're computer will now think you loaded a DVD into a physical drive, and launch whatever DVD player you have installed.  Mine launches "Cyberlink PowerDVD" which plays the AC3 audio-only DVD in full surround sound on my computer.
    Building and testing projects this way will save you endless hours.  If you need to make a quick change, just "Unmount" the .iso in Virtual Clonedrive, rebuild your project to the same filename, and "Mount" it again.  Instant testing!
    Now, as promised, back to that LFE Channel problem with Premiere that I mentioned:
    Audacity will let you modify the individual channels in your interleaved 6-Channel file. So don't put anything in that channel in your Premiere mixer. Leave the "Bass Clef" knobs at full CCW position ( -00 db ).  The bass from the other channels will go to your subwoofer automatically in your Amplifier.
    Now if you have some low frequency effects files, open them in Audacity.  You can open multiple instances of Audacity at the same time by going to "File > New."  Then, copy and paste them into the LFE Track at the correct point.
    Audacity newbie Hint:  Audacity doesn't yet have a "Mix-Paste" function, so to avoid altering the track length as you paste in your clips, do the following: Select the LFE track by clicking on it's info area.  The info area should say something like "Mono, 48000Hz"  Then press "Delete," That will remove everything from the track.  Now copy and paste your clips into the track by clicking once with the "Selection Tool" where you want the clip to start, and selecting "Edit > Paste."  If you need to fine tune the position of the pasted clip, use the "Time Shift Tool" to move it left or right.  If you work from left to right, then you won't push clips over when you paste new ones in.
    There is another way to do this by opening up new tracks, using the "Mix and Render" function, and re-ordering the tracks to maintain the L,R,C,LFE,LS,RS channel order. But that's for advanced users.

  • XDCAM HD workflow with Adobe Premiere Pro CC and Macbook Pro

    Hi folks,
    I have an assignment for a TV production to secure and convert the data (mxf files XDCAM HD 422 1080i 50 / 50 Mbit/sec with 8 audio channels) from Sony XDCAM camcorders (PDW-700) for postproduction.
    The producer wants me to convert the mxf files during production to Apple ProRes 422 (HQ) for faster and smooth editing during postproduction.
    I'm not sure about the final output yet, but I guess it will be either 720p50 or 1080i 25, since the production will be broadcast and as far as I know this is the standard for HD on German television. It is also not clear which NLE will be used for editing (usually one of the producers edits their projects with FCP, but this time they've got their hands full and are still looking for someone to outsource postproduction.
    Unfortunately, my Macbook is getting fixed as we speak, so I can't try things out.
    Since this is the first time I'm doing this workflow, could someone please check if I got everything right?
    1. Can someone please confirm that I can actually convert the mxf files using AME CC to Apple ProRes 422?
    Or do I need to install any other tools/converters for this task? Does MPEG streamclip do the job? Any other freeware?
    2. When converting to Apple ProRes422, the producer suggested to deinterlace the footage (1080i 50) to 25p, if 720p or 1080p I have to find out tomorrow since our conversation got interrupted this afternoon.
    In my opinion this doesn't make sense, though. First, if output to 1080i 25 it has to stay interlaced anyway. Second, in case the output will be 720p 50 I would edit the footage either natively or in Apple ProRes 422, but leave deinterlacing until the very end when outputting to the final format. This way I could use an advanced deinterlacer, e.g. the one from Magic Bullet Suite, rather than just checking some deinterlace box in the export settings for Apple ProRes 422.
    The reason the producer suggested to deinterlace right away when using  an intermediate like ProRes was that she and the client got irritated by the jagged lines from the interlaced footage when editing the last project with the same requirements on a progressive display.
    3. What would be the best solution to tackle this issue (jagged lines) during editing?
    As I said my Mac is getting fixed, so I have no way of trying things out,and I usually edit DSLR footage which is progressive anyway.
    But if I remember correctly I can switch my monitor between 1080p and 1080i. This should do the trick, shouldn't it?
    4. Can I keep all of the 8 audio tracks when converting to ProRes using AME CC ?
    5. Is ProRes422 (HQ) really necessary, or is the regular quality sufficient for this kind of job?
    6. Let's assume the whole project would be edited within Adobe Premiere Pro CC and  system specs as stated below:
    Since Adobe Premiere Pro CC has native support for  XDCAM HD is there any advantage of using an intermediate like ProRes at all?
    How smooth is native editing with XDCAM HD in Premiere Pro CC? I don't think there will be more than 3-4 video tracks in use...
    Thanks for your help!
    working with
    Adobe Premiere Pro CC and Adobe Media Encoder CC
    Apple MacBook Pro
    Intel Core  i7 Quad Core Prozessor
    2.3 GHz and 6MB L3 Cache
    16 GB RAM 1600MHz DDR3,
    256 GB SSD
    Intel HD Graphics 4000 512MB + nVidia GeForce GT 650M with 1 GB GDDR5 RAM

    Thanks Jim! I knew there must be a reason xdcam is widely uses for eng aquistion :) I think they used FCP 6 or 7 on their last project... So what about monitoring interlaced footage on a progressive screen? Any advice on that? Is there a converter built in to APP CC that deinterlaces in realtime when monitoring interlaced sources on a progressive screen? And would you agree that deinterlacing source material is best left right before outputting?

  • "Premiere Pro CS3" is missing some codecs!

    Hi!
    First of all, thanks for stoping by and read my post.
    It's me first time ever using Premiere Pro CS3. I tried to some basic video editing on it, but I cannot hear any sound coming out of my laptop speakers; when i import the video clips. Even tho, I can hear them with "Windows Media Player". So, I investigated a bit and I did some of the things adviced by Adobe's knowledgebase thing.
    And, I came up with a paper saying to download "MediaInfo" and "GSpot" to find out the codecs of the "mpg" files. Here is a report i made with the information given by those programs:
    DVD "VOB" format
    Format: MPEG-PS
    MPEG-2 Program Stream << { 1 vid, 1 aud }
    Sys Bitrate: 10080 kb/s VBR
    Bit rate mode                    : Variable
    bit rate                 : 5 899 Kbps or 5 324 Kbps
    Nominal bit rate                 : 9 100 Kbps
    Width                            : 720 pixels
    Height                           : 480 pixels
    Display aspect ratio             : 16/9
    Frame rate                       : 29.970 fps
    Standard                         : NTSC
    Colorimetry                      : 4:2:0
    Scan type                        : Interlaced
    Scan order                       : Top Field First
    Codec(s) are Installed
    Audio
    ID                               : 128 (0x80)
    Format                           : AC-3
    Format/Info                      : Audio Coding 3 (AC3)
    Bit rate mode                    : Constant
    Bit rate                         : 256 Kbps
    Channel(s)                       : 2 channels
    Channel positions                : L R
    Sampling rate                    : 48.0 KHz
    Resumen:
    0xbd[0x80]:48000Hz  256 kb/s tot , stereo (2/0)
    Codec(s) Installed
    Missing:
    DSH FmtTag: 0x00ff    "MainConcept (Adobe2) AAC Decoder" {214CD0D1-FC06-41B1-8BB8-84DA4CFB17D9} 0x00600000 ** File Missing: "C:\Program Files\Adobe\Adobe Premiere Pro CS3\ad2daac.ax"
    DSH Video "MainConcept (Adobe2) H.264/AVC Decoder" {FF890B41-A4C5-4B19-87CF-65D86EC12F1C} 0x00600000 ** File Missing: "C:\Program Files\Adobe\Adobe Premiere Pro CS3\ad2dsh264.ax"
    DSH MPEG1Packet "MainConcept (Adobe2) MPEG Audio Decoder" {25AD5730-4DE0-4CF8-952A-2AEF53AC4321} 0x005fffff ** File Missing: "C:\Program Files\Adobe\Adobe Premiere Pro CS3\ad2mcdsmpeg.ax"
    DSH MPEG1Packet "MainConcept (Adobe2) MPEG Video Decoder" {25AD5740-4DE0-4CF8-952A-2AEF53AC4321} 0x005fffff ** File Missing: "C:\Program Files\Adobe\Adobe Premiere Pro CS3\ad2mcdsmpeg.ax"
    DSH MPEG1System "MainConcept (Adobe2) MPEG Splitter" {25AD5720-4DE0-4CF8-952A-2AEF53AC4321} 0x005fffff ** File Missing: "C:\Program Files\Adobe\Adobe Premiere Pro CS3\ad2mcspmpeg.ax"
    DSH Video "MainConcept (Adobe2) MPEG Encoder" {25AD5750-4DE0-4CF8-952A-2AEF53AC4321} 0x00200000 ** File Missing: "C:\Program Files\Adobe\Adobe Premiere Pro CS3\ad2mcesmpeg.ax"
    DSH YV12 "MainConcept (Adobe2) H.264 Encoder" {FF890B51-A4C5-4B19-87CF-65D86EC12F1C} 0x00200000 ** File Missing: "C:\Program Files\Adobe\Adobe Premiere Pro CS3\ad2esh264.ax"
    DSH RGB24 "MainConcept (Adobe2) MPEG Video Encoder" {25AD5760-4DE0-4CF8-952A-2AEF53AC4321} 0x00200000 ** File Missing: "C:\Program Files\Adobe\Adobe Premiere Pro CS3\ad2mcevmpeg.ax"
    DSH PCM "MainConcept (Adobe2) MPEG Audio Encoder" {25AD5770-4DE0-4CF8-952A-2AEF53AC4321} 0x00200000 ** File Missing: "C:\Program Files\Adobe\Adobe Premiere Pro CS3\ad2mceampeg.ax"
    DSH MPEG1Video "MainConcept (Adobe2) MPEG Multiplexer" {25AD5780-4DE0-4CF8-952A-2AEF53AC4321} 0x00200000 ** File Missing: "C:\Program Files\Adobe\Adobe Premiere Pro CS3\ad2mcmuxmpeg.ax"
    DSH RGB24 "MainConcept (Adobe2) H.264/AVC Video Encoder" {FF890B61-A4C5-4B19-87CF-65D86EC12F1C} 0x00200000 ** File Missing: "C:\Program Files\Adobe\Adobe Premiere Pro CS3\ad2evh264.ax"
    DSH PCM "MainConcept (Adobe2) AAC Encoder" {866DFE40-5582-4FA6-B4BC-665781A007E6} 0x00100000 ** File Missing: "C:\Program Files\Adobe\Adobe Premiere Pro CS3\ad2eaac.a
    As you can see "Premiere Pro CS3" is missing some codecs, so my question is where can I download those?
    I forgot to tell you, that I use a HP laptop Dual core Intel processor with Win Vista Home 2 GB of RAM and 160 GB of HD
    Thanks in advance
    P.S. I am attaching the Diagdx.txt, even tho I don't think has to necesary
    P.S. 2. I just saw another post similar to this one, but it doesn't tell you how to make "Premiere Pro" get the audio to work in my clips and finished project

    Most good file converters can handle Video and Audio. If you are having issues with the Audio, both Audition and SoundBooth can convert to almost anything and any sample rate and bit depth.
    Here's a LINK to the PrPro Wiki. There are links to various aspects of conversion there.
    Now, remember that when working FROM MPEG-2 and also AC3, the files are compressed to begin with. Quality will suffer, and there is only one way around that - go back to the original source files. If not possible, then you have to determine if the quality has suffered too much.
    Good luck,
    Hunt

Maybe you are looking for