Premiere Pro CC Audio Cuts Out

Okay,
So I've switched to the new Premiere Pro CC and now my audio drops out during playback. Doesn't matter if it's an aiff, mp3, whatever. I never had this problem with Premiere Pro CS6. All files are saved to an XServe Network on OS 10.8.4. I'll have to remain using Premiere CS6 for the time being.
Also, just tested this out. I had a TIFF sequence playing with this audio. It did NOT like that. I can play the audio by itself just fine. So it seems to be a problem with playing the video file WITH the audio.

This happens on nearly every project I start in Premiere Pro CC.
It's really frustating and makes editing very difficult. It is almost impossible to watch the flow of an edit.
I used Premiere CS6 and this never happened. In fact I got my entire office to switch from Final Cut 7 to premiere recently because CS6 was so great and chugged through footage without the hassle transcoding. I very much want this issue resolved.
I am typically working with multiple layers of video and 1 layer of audio - footage straight out of Canon 5D Mark III
This even happens when you quote un quote "render audio" which doesnt make sense to me.
Happens when you render the enite video video with render all effects.
I work on a decked out mac book pro at my office
and a fairly decked out mac mini at my house (though i realize it is still a mac mini)
This happens both when running on an internal drive or firewire 800
I just watched my activity monitor - it seems to happen when the free ram goes to less than 100mb -
however the ram fluxuates a lot when playing back.
I am currently working on a projcet that is 2:30 long. The only applications open are premiere, safari and the activity monitor.
I just opened premiere and flushed the preferences by holding option and shif
Watched the video once entirly with no issue (it was rendered mostly from last time I was working) my free ram started at about 3 gigs available the first time I watched. When it was done playing I had about 1 gig available
I stated playing the video again and the ram went down again to nothing and audio stopped - audio levels die (even though there is audio there) - video played okay. pressing play immediatly to start it fixes it temporarily but then it cuts out again
I went back to the begining again and this time deleted my render files. playback on both A/V were very poor.
I dont know too much about computers but it seems to be a ram issue - this being said my mac mini which i am on right now has 8 gigs and my mac pro at work has 24. Both should be sufficient ram.
Thanks for your help and look forward to Adobe's fix for this issue. I hope it is as pressing for your team as it is for all of us.

Similar Messages

Logic Pro X Audio cutting in and out

When I am trying to record in Logic Pro X the audio seems to cut in and out at random points.
I have a MP3 track that I am recording to and it just randomly cuts out. Even when just playing that track by itself the same thing happens though never at the same spots. If I open the MP3 in Itunes or Quicktime there is no problem with the track.
As this seriously messes with the time of the piece and makes the recording long and painful I need help.
Is there some type of connection I am missing? I am using an old Presonus Firebox as an Interface, it unfortunately has adaptors to take it from firewire to thunderbolt. Recording into a 27" Imac that is very souped up and shouldn't have any problems until I hit a hundred tracks or so and I am only trying two.

It's most likely the Fusion drive, one of the symptoms is audio cutting out.
There are several related threads in this forum regarding audio problems with the Fusion drive.
This thread alone would take a couple of days to read.
https://discussions.apple.com/message/24709429#24709429
A fix is supposed to be coming in the next operating system update.

Is there anyway to have Premiere Pro recognize the "in" & "out" points and the sequence's "home" (first frame) as edit points so that the up & down arrow work as short cuts on these areas?

Is there anyway to have Premiere Pro recognize the "in" & "out" points and the sequence's "home" (first frame) as edit points so that the up & down arrow work as short cuts on these areas?

Hey guys, I wrote a big long speech trying to be more clear and was just getting more confusing. LOL
Hopefully this image makes my question a bit easier to understand. In green you can see how the up and down arrow keys land while in Final Cut. In red how they land while in Premiere. I'd like them to land like Final Cut. Thanks!

Why does audio cut out 10-15 minutes into iTunes movie? Using Windows 8.1 Pro 64 bit

My audio cuts out in any completely downloaded iTunes movie (SD or HD) 10-15 minutes into watching it in iTunes how can I fix this?
I have to shut down iTunes completely and restart it again to get the audio to come back. 10-15 minutes later the audio disapears again.
I am running a Windows 8.1 Professional 64-bit on a PC, 8 GB RAM, ADM Athlon II X2 265 Processor, 3.30 GHz
Running iTunes application version 11.1.3.8
Quicktime 7.7.4 (1680.86)
I tried uninstalling and reinstalling iTunes already.
Any ideas?

Hi RonaldRenaud,
If my understanding is right, this RDP issue only occur in the connection between Windows 8.1 and Server 2008.
Please check if you have installed the update kb2984006.
To resolve this issue caused by update 2989039, install update rollup 2984006. For more information, please refer to the following KB.
http://support2.microsoft.com/kb/2989039/en-us
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

Touchsmart 9100 Audio Cuts Out

I have Touchsmart 9100 with Realtek High Definition Audio running Win 7 Home Premium SP1, 8GB RAM (currently: 7.75GB Physical, 1.88GB Available, Total Virtual 13.7GB, Available Virtual 7.53); Dell 5650 5.1 surround sound with the three-to-one reducer connector plugged into the analog audio out port.
Realtek Driver
c:\windows\system32\drivers\rtkvhd64.sys (6.0.1.7076, 3.53 MB (3,698,904 bytes), 2013-12-14 22:28)
Audio Codecs
c:\windows\system32\imaadp32.acm   Microsoft Corporation       OK   C:\Windows\system32\IMAADP32.ACM   6.1.7600.16385   21.50 KB (22,016 bytes)   2009-07-13 20:18
c:\windows\system32\l3codeca.acm   Fraunhofer Institut Integrierte Schaltungen IIS   Fraunhofer IIS MPEG Layer-3 Codec   OK   C:\Windows\system32\L3CODECA.ACM   1.9.0.401   79.50 KB (81,408 bytes)   2009-07-13 20:22
c:\windows\system32\msadp32.acm   Microsoft Corporation       OK   C:\Windows\system32\MSADP32.ACM   6.1.7600.16385   23.50 KB (24,064 bytes)   2009-07-13 20:18
c:\windows\system32\msg711.acm   Microsoft Corporation       OK   C:\Windows\system32\MSG711.ACM   6.1.7600.16385   14.50 KB (14,848 bytes)   2009-07-13 20:18
c:\windows\system32\msgsm32.acm   Microsoft Corporation       OK   C:\Windows\system32\MSGSM32.ACM   6.1.7600.16385   28.50 KB (29,184 bytes)   2009-07-13 20:18
My streaming video audio will cut out for several seconds at a time then return to normal again. I can, when the audio cuts out, turn up the manual volume on my surround sound to hear however when audio returns, I get blasted until I turn down the surround sound again. High CPU utilization *may* be a contributor to this problem - currently averaging about 95%.
What can I do to correct this problem?

Hi MDS,
Here are the possible HP products for a Touchsmart 9100. Both models do not list Win 7 Home Premium as an HP supported operating system. Did you upgrade from Vista to Win 7 or did you perform a clean install of Win 7 Home Premium?
Both models also reflect this updated driver version (6.0.1.5932) for Realtek High Def Audio. You have driver version (6.0.1.7076) installed on your PC.
You could try installing the version per the above link if you have Win 7 Pro 32 bit or 64 bit installed.
Try checking your file system by opening an administrative command prompt and entering the following: sfc /scannow
You may have to schedule this task to run at the next boot. Please reboot your system to run the task.
Do you know which process is consuming all of your PC's CPU time?
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

Audio cuts out most of the way through an iDVD image

We created a Quicktime file using Final Cut Express HD 3.5, and imported the Quicktime fill into iDVD 6 (all patches have been applied to iDVD and to Quicktime, and Quicktime has been upgraded to Pro version). The iDVD preview shows that all audio is present all the way through the end of the video(about 1 hour and 5 minutes), which means that the Quicktime file has all the audio present.
However, after creating a DVD disk image with iDVD 6, the audio cuts out completely about 55 minutes into the video. The spot where the audio cuts out is not near any chapter marker nor near any transition of any kind in the Final Cut editor session.
By the way, I am creating the image on an external Firewire drive with 112 Gbyte free, although we also tried the internal hard drive which has about 20Gbyte free.
How can I figure out how to get all the audio onto the image created by iDVD?

I believe I've found the cause of the problem! Within Final Cut Express, I found a system setting for output buffer size, set by default to 2Gbyte. I also found that the default 'Convert to Quicktime' setting is for Internet Fast Start. I increased the buffer size from 2Gbyte to 3Gbyte and unchecked Internet Fast Start, and I have no more audio drop out!
I think that iDVD has a bug when multiple file segments are linked together in the Quicktime file (because of the smaller FCE output buffer size). Note that the iDVD preview did not experience the problem, so that part of the iDVD app seems to handle multiple file segments correctly, whereas the part that processes the file segments while creating the DVD image seems to have the bug. Increasing the buffer size masked the iDVD bug.
So if anybody from Apple is listening, please fix your iDVD bug please!
Concerning the ZR85, I do re-use tapes quite a lot and have never experienced problems. I do clean the ZR85 heads periodically. However, I shall consider using new tapes more often.

Audio cuts out half way through video after conversion.

I just put together some video clips I've shot into a single video, then ran it through conversion. Half way through the completed video, the audio cuts out for the rest of the film. Yet in iMovie, it's still there. I've converted twice and it cuts out in the same spot. Could corruption in a single clip, kill the audio for the following clips? Since it takes hours to convert, I thought I'd ask before deleting the suspect clip and starting again.
I've spliced together clips before without problem, using the same camera source.
Thanks.
Cheers

I figured a work-around. From the clip where the audio cut out till the end, I dragged those clips to a new iMovie project. After converting, the sound was intact for that portion. Then I opened the complete version with audio cut-off in Quicktime Pro. Deleted the the half with audio loss. Then joined the new half I just created. Voila!
Only when I went to post the video on my vlog, did my Internet connection die (Comcast strikes again).

.MOV's Audio Cutting out after first few seconds????

If anyone could assist me I would be extremely grateful. When I import .mov files into Premier Pro cs5, it cuts out after a couple of second. Any other file works fine, it’s just the mov’s. If I play the QuickTime outside Premier it works fine. Does anyone have a solution?
I am trying to compile a video of a range of different clips from my trip in India.
The clips details:
* Various dimensions but average: 640x480
* 30 fps
* Photo – jpeg
Is there something specifically I should select when setting up the file?
Thank you to whoever has to patience and knowledge to help me out.

Have you installed the Premiere Pro CS5 (5.0.2) update?
What operating system are you using?

Bluetooth audio cutting out

The bluetooth connection for all audio speakers is cutting out - especially when scrolling through email and web browser. I'm on a MacBook Pro 13-inch, Mid 2010. The issue of bluetooth cutting out started after loading Yosemite (now 10.10.1.). It doesn't matter what speaker I'm connected to via bluetooth or the distance between the computer and speaker. While listening to any streaming audio - from any source (web, iTunes, etc.), when I type or scroll through email or browse the web, the audio cuts out on the bluetooth speaker. Is there something I can do to fix the connection issue?

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear, and then again as you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - Mavericks
Safe Mode - About

Audio cutting out when using D2 external Firewire Drive

Hi,
I have just upgraded to Logic Studio, using the following setup:
Macbook Pro
Motu 828
AMT 8
Logic Studio
D2 Lacie 500GB Firewire Drive
As the MacBook's internal hard drive is not sufficient to record and playpack efficiently, I was advised to get an external Firewire Drive. Given that I have very little space on my laptop - (am running windows on a partition also) I am trying to save my logic files to the external HD. When creating tracks specifically using Audio Instruments, the playpack keeps cutting out.
I am connecting the HD via usb 2. I am also having to freeze the tracks in order to record more layers. There is lots of clipping and latency. I thought by using the external, this problem would be resolved.
The HD is not playing back the tracks fast enough, and keeps cutting the audio out. The audio cuts out everytime the blue light on the drive flashes.
I cannot save the files to the MackBook HD as there is notenough space.
Is there something very wrong with my setup?
any advice would be really appreciated.
ps. I am a bit of a newbie
thank you in advance.
Spy

Connect it via firewire 800. USB2 is not good for audio or video streaming.
I have 3 D2's connected to my mac pro, works like a charm.
good luck.

Audio cuts out in the final minutes of a 1.5 hour movie

My burned DVD has great sound, EXCEPT that the audio cuts out completely for the last 5 minutes or so of the last chapter. My project is about 90 minutes long and contains camcorder footage, pictures and added background music (not protected). I've checked the movie file - it's fine, and everything previews fine in iDVD. The DVD was encoded with "Professional" quality.
Perhaps it's too long? but no errors were reported. Advice?

Possible Explanation and Solution: I had assembled my movie from two m4v files, the "large" exports produced by iMovie when you share projects to the media browser. I used QT Pro to simply copy and paste one onto the end of the other, and saved as a .mov. I thought this was a clever solution to the lack of a "Play All" problem in iDVD. All my chapters and everything worked beautifully in iDVD preview. But then the audio dropped out on the final output. Oh Well, it almost worked!
With no other solution in sight, I recreated my DVD project this time with the two separate .m4v movies from the Media Browser and everything works on the finished disk. I have the annoying return to the menus, but at least I finally have a complete disk.
Take home lesson: Bite the bullet and assemble your complete DVD movie in one iMovie '09 project. The convenience of dividing it into smaller projects is a trap - there's no good way to put them back together for the final DVD. What a pain.

Encoded FLV audio cuts out half way

I'm trying to encode a.mov file to .flv using Flash Video
Encoder CS3. Every time I encode, no matter what settings I use,
the audio just stops half way through when played back in Flash. If
I encode in Squeeze, it works.
What's the deal?

I am having the same problem. I am outputting a video from
Final Cut Pro to QT, then checking my QT file to make sure the
audio is there, then I encode in Flash Video Encoder CS3, and like
the person below me, the audio cuts half way through the video.
I was using a 480x360 QT file and converting to 15 fps
480x360 flv, audio cuts out. Using a 320x240 QT file and converting
to 15 fps 320x240, audio is there.

Audio cuts out for a few seconds

Hi,
I'm not sure if anyone is experiencing this but it happens to me all the time and it's so so annoying.
When playingback the timeline on CS6 the audio cuts out at random places and then it comes back, then it goes again for a few seconds then back again,..while video keeps on playing.....this is just random and it can happen as soon as you press play or after a few seconds and it happens when audio is stereo, mono, mp3,wav,aif, you name it.
Also, it happens regardless of playback quality or timeline render status (red, yellow or green). My computer is quite fast + 24gb RAM so I dont think the PC is a problem, It also happens on a different computer within our studio.
Needless to say that editing under these circumstances is becoming impossible/frustrating and I'm even considering finding other software to edit with! I've found others with this same problem at cretive cow http://forums.creativecow.net/thread/3/935424
If anyone from Adobe reads this, please help!!!
thanks in advance

Unfortunately there's no fix for this problem that plagues Classic since release. Considering that a new generation appeared I guess we have no reason to expect a fix anymore.
I also have the problem and it makes the iPod Classic less desirable to be used as a music player than a generic $10 (no name) usb stick.

Audio cut out and midi miss sync

Lately I have been getting audio cut out, and the missing, 'error while trying to sync audio and midi'.
I thought it was that I had too many instances of virtual instruments. So I mixed the song down. Imported that into a NEW song, with only one audio track, and then proceeded to try to do an organ overdub...Well Logic still drops out and gives me the message, even though there is NO midi information in this file...
Then I noticed that even AIF or mp3 files, didn't play properly from the desktop preview mode. They stop too. Activity monitor doesn't seem to be showing anything overworking..
Disk Warrior fixed some volume errors,
Anyone have any ideas to try?

I'm using a motu828. I disconnected the firewire connection, and ran audio from the headphone jack to the motu, and VOILA, no problems... Last year, I went thru two motu units, not really sure if they are the issue.
I think it might be LOGIC's firewire circuitry. Apple techs couldn't find the issue, I had the G5 motherboard replaced. Another factor was I had 3 Lacie firewire drives (2 firewire 800, 1 400) I have had 4 Lacie drives die on me in the last 3 years. They are the only firewire drives I have, so I don't know if the fault lies with them, or the again Apples firewire circuitry, stressing the drives out???
I also put a firewire 800 card in my system.
I have now switched to an external ESATA raid setup. No more firewire drives. So far so good. Since I had the whole motherboard replaced, I don't know what that means in terms of MOTU connected via firewire..
For now, I'm running audio out of headphone jack, using all virtual instruments, so I know it will sound better when I get firewire audio up and running, but I got tired of it cutting out every 3 - 30 minutes. I'm thinking about the apogee duet unit. But again if it's connected via firewire, I don't know where that leaves me..
My G5 is three and half years old, perhaps it's tired and wants to be retired....
The dark part of me wonders, if Apple computers don't start crapping out after three years of heavy use, or is it that technology, software, updates, push the hardware beyond it's capacity after a few years.

Premiere Pro CC Audio Cuts Out

Similar Messages

Maybe you are looking for