Premiere Pro CC crashes and has to shut down, doesn't save Sequences?

I have recently bought Create Cloud and with it installed Premiere Pro CC and other programs such as Photoshop, Lightroom, etc... I was editing a movie a few days ago and then a message popped up saying that Premiere Pro CC has crashed and is forced to now shut down (it does it automatically). When opened again the sequences are not saved, same with the imports, and this kept happening at least 3-4 more times. So I uninstalled Premiere Pro CC and installed it again, but it just happened again. What do I do?

FAQ: What information should I provide when asking a question on this forum?

Similar Messages

Help Please B/W G3 crashed and will not shut down...

My old back-up B/W G3 crashed and will not shut down. After the crash my wife who was working on it attempted to restart it and all that happens is the gray screen with the Apple logo and the spinning dial (not multi-colored wheel). This actually happened a few months ago and I've just been using my MacBook instead, but realized there was still some info that we needed to retrieve from the G3.
The only way to shut down is to unplug. I replaced the Lithium 3.6V battery but that didn't help. I tried holding down the apple, command + P, R keys for the 3 chimes and that didn't solve it. I have no clue what else to do. I would love to somehow be able to at least download the info from the hard drive(s), but have no idea if the drives may be corrupted.
Please help with any advice. Many thanks.
RK

You can also try two other methods of Disk repair, without the Install CD:
• Boot up while holding down the Shift key at startup. This forces the Mac to check and Repair its Hard Drive as it boots up, and does not load most extensions. This is called Safe Boot or Safe Mode.
• Boot up Darwin in Single-user mode by Holding down Command and S at startup. When the messages stop scrolling, and it appears to prompt you for input, type:
fsck -fy
which forces it to check the disk, even if it is journaled.
The full story is in this article:
TS1417- Resolve startup issues and perform disk maintenance with Disk Utility and fsck

HT4623 My iPhone 4 freezes and has now shut down since doing the update this past Saturday.

My iPhone 4 freezes and has now shut down since doing the update this past Saturday.

Hi candybooist,
Thanks for using Apple Support Communities. This article has steps you can take if your iPhone is unexpectedly powering off:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Cheers,
- Ari

Premiere Pro CS4 crashes and system shuts down while rendering

Hi All,
Good morning everyone, my system shuts down while rendering using Adobe media encoder from premiere pro. I have tried the following:
1.Completely removing CS4 and reinstalling.
2. Updating all the video drivers.
3. Re installing the Operating System (XP and Vista)
But the issue persists, i have attached the crash report and any thoughts are highly appreciated.
Regards,
Vincent

A number of problems pop out of your DXDIAG:
Both your video driver and your audio driver are more than 3 years old.
Your F drive is slow, because of the fill rate of 90%. You lack other hard disks.
You have Matrox, BlackMagic, Nero, Sony, DivX and other stuff installed. It has been a long time ago that I have seen such a long list of DirectShow filters installed.
Suggestions: Update your drivers, clean up your F drive and add another disk, remove all that Matrox stuff, possibly include BlackMagic and Sony.
What export/encoding settings do you use from what sequence settings?

Premiere Pro CS3 Crashed, and now will no longer start back up again..

I was working on a project today using Cs3, I've had it since spring and it always worked fine until tonight when i was editing a project.. In the middle of my editing the program unexpectedly froze than crashed...
I then tried to restart it and i got this message which popped up in 4 windows..
" Sorry a serious error has occurred that required adobe premiere pro to shut down. We will attempt to save your current project" i then hit ok and it exited completely, i tried to open it again, same thing..
so then i restarted my computer and i got a different message that said something like i wasn't aloud to use the program anymore and had to reinstall it or cal adobe tech support... so i put the CD in and re-installed it and got the same message when opening the program up again "serious error messages" I then went to the CS3 updates to update it back to version 3.2.0. But still continue to get the error message.
so something must have happened during my edit that caused it to stop working, but i have no idea what it could be. I even tried to do a System restore..which also got a error message....thanks vista...
anyways..i can use some help, thanks
:edit:
i tried to reinstall Premiere Pro 1.5 since Cs3 was an upgrade.. I reinstalled it then reinstalled Cs3 again, and i still get the "serious error Message" so that didn't work...

Ok i looked at the Troubleshooting site Eddie gave me, and tried to answer the questions as best i could.
Never used any Adobe Beta software.
I freed up a lot of space off of my hard drive, i only had like 5GB-10GB left, but it still worked when having such low space
I did a disk clean up as well as disk defragment, and moved a lot of high GB files over to my second hard drive. i have over 27GB of free storage left now, its a 150GB hard driver. should i have more?
I Tried holding down the Shift button, but didn't help
I tried to open up Encore Cs3 which came with Premiere, i barely ever used this one, but its funny how this wont work either. I think i used it once before and it worked. But it old how none of my Cs3 Programs. never installed On location.
also this isn't a pirated copy or anything, i bought it as an Upgrade from Amazon back in the spring. Upgrading from Premiere Pro 1.5 which also wasn't pirated, i got that as a gift.
My older version of Premier, 1.5 still works, and my older versions of Photo shop (CS?) and After effects (6.5) still work. So that's good. Just having a problem with Cs3 :(
Premiere Pro
1. Version number Cs3
2. Installation language -English
3. Updates applied -3.2, latest?
Operating System
1. Name Windows Vista 64-bit
2. Update/patch level- everything is up to date.
3. Installed language - English
CPU type and speed
Intel core 2 Quad Q6600, 2.4
Amount of memory (RAM)
4Gb DDR2 800 G.skill 2X2, only 2 sticks.
Video card
1. Manufacturer - Evga
2. Model 8800 Ultra Ko
3. Driver version lastest driver for that card
Number of monitors (displays) in use
only One monitor
Audio card
1. Manufacturer On board audio . Evga
2. Model - 680i Sli motherboard
3. Driver version- i'm pretty sure its up to date.
Each hard drive's capacity and space remaining
1 150GB Raptor 27GB remaining, Main hard drive.
1 300GB 216 Remaining, Storage.
Hardware capture device
1. Manufacturer . Both Seagate
2. Model main one, which has Premier on is the Seagate 15- GB 10,000 RPM Raptor.
3. Driver version number
Capture software
1. Name I capture using The premiere pro capture tool
2. Company
3. Version
sorry that i haven't answered all the questions on the Trouble shooting, i'm still going through them and testing everything.

Premiere Pro CS5 crashing and not allowing updates

Hello,
I'm experiencing two problems with ProCS5.
First, while in pro, the program crashes when I click on a video clip in the Lib to view it in the monitor.
Second, I tried to update to the program hoping to correct the first issue, but the update returns the error "installation unsuccessful" for unknown reasons.
I am running:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 7 GB
Bus Speed: 1.33 GHz
I just installed a 1.5T hard drive for video editing and formatted as Mac OS Extended (Journaled).
I can view the videos directly from the hard drive and the play back is fine. I'm only having this problem in Premiere Pro CS5.
Any help will be greatly appreciated
Regards,
DS

>just not Mpeg 4s
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project

Premiere Elements 9 opens but freezes and has to shut down?

I have been using this for about 2 months and i love it.
I have just rendered a whole wedding, and now when i open the project, it takes ages, then doesnt respond and I have to shut down?
Any ideas?
Karen

>Any ideas?
More information needed for someone to help http://forums.adobe.com/thread/416679
Some specific information that is needed...
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line
above the video in the timeline, which indicates a mismatch between video and project

Premiere Pro CC2014 Crashes, won't update (U44M1P7), cleaner doesn't help, says projects are from newer version

Hi,
Premiere Pro CC2014 (win 8.1) has stopped working for me. I tried to update yesterday but that failed. Nevertheless, I could still work in PP.
Today when opening any project (I worked on them yesterday) I get this:
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[c:\cloudroom\releases\2014.09\shared\mediacore\mediafoundation\api\in (<-at this point the edge of the dialog box is reached)
Then I get a 'Premiere Pro has encountered a serious error'-message end it's game over.
Restarting doesn't help, this keeps on happening.
So, I tried to update again; update still fails
Uninstalled PP CC2014
Used Adobe Cleaner Tool
Reinstalled PP CC2014, I now get a message:
Installation succeeded, but a patch failed
Errors encountered during installation. (U44M1P7)
Start up PP CC2014, try to open a project I worked on yesterday and get a message that it can't open this because it was created with a newer version.
So, I am screwed. I need a solution asap, as in NOW.
I have deadlines to make.
regards
Jan

U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Premiere Pro CS6 crashing and bizarre colors with Yosemite 10.10.1

See attached images. Latest version of Yosemite, Premiere and Cuda driver is updated to 6.5.36. Only happens when I'm using Premiere. Given, it's not Premiere CC, is there still support available?

>Given, it's not Premiere CC, is there still support available?
CS6 is 3+ years old and no longer supported by Adobe... so you are mostly on your own when it comes to problems with Yosemite... unless someone who reads this message is using both and can give you some ideas

Since upgrading to 6.0 this morning my internet is very slow, Firefox keeps crashing and will not shut down.

See the above question. Is my operating system 10.6.8 unable to handle the new upgrade and should I go back to the previous Firefox and Adobe Flash I was previously using. I never had these problems before and now every time I use my internet today, I am having major problems.

about:crashes only lists crashes that you have reported using the [[Mozilla Crash Reporter]] which comes up after a crash. Because there are so many possible reasons for a crash, getting the crash ID really helps volunteers find the cause quicker.
That doesn't mean we can't help without a crash id. :-) No crashes here, but I'm also on Snow Leopard and using Firefox 3.6.6.
Are you using Firefox 3.6.6? The most common cause of crashes on Mac is the Flash plugin. Are you using the latest version of Flash? You can check at http://www.mozilla.com/en-US/plugincheck/
Do you remember any specific circumstances about when the crash occurred? What sites you were on?

FCP Crashing and Hard computer Shut down

I hope that someone might be able to give me an explanation as to what his might be. If I am editing and I scrub forward and then BACKWARDS my computer CRASHES. The whole stinking think goes hard crash. This happens very frequently. At first I thought it might be the power supply, but it never crashes in other apps. Only in FCP and only when I am scrubbing or previewing and then move the timeline arrow to the front of a clip. Saving my project after every edit and or every 10 seconds is really getting old. Is there any other thought as to what this might be?

I think I have narrowed it down to the Video preview. Roland from T.O. suggested that it could be a firewire cable issue. I know that sound weird...but I open up FCP without my DV deck connected through the computer and nop video preview. I scrubbed the **** out of the project and really made it work. Viola...no crashes. So today I will try a new cable....if it still crashes with the preview.....that would mean it is a bad Firewire port. (I would assume)
Any thoughts

On any page that I have to log in Firefox stops responding and has to shut down. I've tried resetting it and it still doesn't work.

I've been having this problem for a while now and I can't seem to fix it. Any time I log into any page, Firefox says not responding and I have to restart it. I have to run all of firefox in safe mode if I log out of my email or facebook. I've tried resetting FF and it still doesn't work.

''' "I have to run all of firefox in safe mode if I log out of my email or facebook. " '''
Please explain what you mean by '''all of firefox'''. You're either running in the Firefox SafeMode or you're not. There's no "all" or partial SafeMode.
Please see this: https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode

Premiere Pro CC Crashing

Hi, I have been working with some projects in Premiere Pro CC without issue. These projects have been imported via .xml from FCP7. All was going swimmingly until I started importing some graphics that I created in After Effects CC. All of a sudden Premiere Pro is crashing and it does this in all the projects that I'm working with on this particular external hard drive. It doesn't seem to matter when or where. Sometimes it crashes on opening, sometimes it waits till I'm halfway through playback, then crashes. Other times it crashes upon bringing something into the timeline. All of these videos are less than 2 minutes long, have been color corrected in Speedgrade via direct link and audio mixing in Audition.
I have noticed that the playback window sometimes does not show the video, even though the sound is working. Restarting the program will fix this, but it then crashes shortly after.
I have been working with some other projects on a separate drive, which have no After Effects files involved and there has been no issue.
I have uninstalled both After Effects and Premiere and reinstalled. They are both up to date according to my Cloud.
My computer is a two month old iMac 27"
                                                       3.5GHz Intel Core i7
                                                       8 GB 1600Mhz DDR3
                                                       NVidia GeForce GTX 780M 4096MB
                                                       OS X 10.9.1
Any help is appreciated. I'm sorry if this is in the wrong forum. I didn't see any answers elsewhere.
Thank you very much

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

Itunes Has To Shut Down

my brother sent our computer to a reset point and i had to un-install Itunes. Now when i try to re-install itunes it completes but then comes up with a message saying Itunes has encountered a problem and has to shut down. It also says about sending an "error report" which i have done but nothing has come of it. PLEASE HELP people

top fixes for a new iTunes install/upgrade are
- turning off security software such as Norton before the install as Apple suggests
- installing QuickTime standalone, not regular
http://www.apple.com/quicktime/download/standalone.html
- setting up Norton to allow iTunes
- scanning for malware with ewido (Free at www.ewido.net/en/)
- last but not least, using MSCONFIG to find Windows conflicts
http://docs.info.apple.com/article.html?artnum=302538

Premiere Pro CC crashing randomly and leaving empty audio of synced clips

I've been having problems working with premiere in OSX 10.9
The program shuts down randomly some times when editing, some times when playing back, it's very unstable.
And two times the audio tracks synced using the merged clips are empty and there's no way to put it in sync again.
I`ve been searching in the internet for a way to fix this but I can`t find any info.
Process:         Adobe Premiere Pro CC [7754]
Path:            /Applications/Adobe Premiere Pro CC/Adobe Premiere Pro CC.app/Contents/MacOS/Adobe Premiere Pro CC
Identifier:      com.adobe.AdobePremierePro
Version:         7.2.1 (7.2.1)
Code Type:       X86-64 (Native)
Parent Process: launchd [221]
Responsible:     Adobe Premiere Pro CC [7754]
User ID:         501
Date/Time:       2014-02-19 19:59:39.484 -0600
OS Version:      Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: DC21D278-26B8-B15A-7135-B304B44CCE22
Crashed Thread: 45 Dispatch queue: com.apple.root.low-priority
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: EXC_I386_GPFLT
[Please don't post crash logs to the user forums.]
Message was edited by: Jim Simon

Just incrase the windows Swap File.
Serioulsy, is it a joke ?
54go of the swap (set to 100go for test) + 9go of the ram.
Never had this before.

Premiere Pro CC crashes and has to shut down, doesn't save Sequences?

Similar Messages

Maybe you are looking for