Premiere Pro CC does not embed 708 captions in QT

Despite the fact that all of the online videos make it seem like exporting embedded closed captions is a breeze, it is not. After much experimentation I have found out there is no way to export 708 captions embedded into a QT file. I have been working with closed captions for a long time, and I am very familiar with the different pitfalls of closed captions. Why Adobe would chose to embed 608 captions only in an HD file is beyond me. To be excepted by broadcasters the captions must be 708 VANC Captions with the 608 alternative. Every time I get a file out of MACCaption this is what is included. I have tried to import those files into premiere pro CC and it does not see the captions.
I have tried creating the Sidecar file as a .mcc file, and it seems to be correct. Unfortunately there is no way to embed this into a QT file.
Kevin

You are correct that 708 captions cannot be embedded in QuickTime files; they can be embedded in MXF OP1a outputs or written to sidecars. This is covered, albeit indirectly, at the bottom of this help page.
Support for closed captions is a work-in-progress. CC7.0 provided support for CEA-608 and Teletext; support for CEA-708 was added in either 7.0.1 or 7.1. Of course, "support" is a loose concept, and work remains to be done on particular aspects of what exactly can be imported, how captions can be exported, and workflows for editing captions in a project. You can help us set priorities by submitting feature requests on what you think are the greatest needs.

Similar Messages

Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!

I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
Theo Smith

I sent the screenshot via an e-mail attachment. I wasn't aware that
attachments could not be forwarded this way. I will send it again. First time
I've utilized this service.
In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time,
[email protected] writes:
Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3
aspect ratio
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in Adobe
Media Encoder (AME) - View the full discussion
(https://forums.adobe.com/message/7264779#7264779)

Premiere Pro CC does not open MOD files correctly

Hi,
I just started using the Adobe Creative Cloud as a trial, in particular the Premiere Pro CC software, since it might be relevant, I am working on a mac (completely updated as of yesterday).
I have a JVC GZ-MG505 camcorder. This device saves the video files on an internal HDD in a file format called MOD. From what I have been able to see when searching on the web, this should be nothing more than a MPEG-2 file.
So, I tried importing some video files into Premiere Pro and to my surprise, I noticed that a whole strip on the right hand side of the image is missing. The original is recorded in a widescreen (16:9) format with 720x576 pixels and Premiere Pro gives me a file with 540x576 pixels. I have tried using the Interpret Footage to change this, but it doesn't let me change the number of pixels. I also tried opening the files in Adobe Media Encoder and I have exactly the same results as in Premiere Pro. However, opening the files in VLC or mPlayer they come out exactly as expected with all the pixels there. Has anyone come accross this problem before or can anyone help me with solving this?
I could try reencoding the files with VLC, but the output file is much smaller than the input file, so I am afraid I am loosing some definition.
So, just to restate my problem, the adobe products open my MOD files without complaining, but for some reason they loose a strip 180 pixels wide on the right hand side of the image.
Cheers

Premiere Pro CC does not open MOD files correctly
That is correct: there is a bug in CC. In CS6 they work correctly.
Please file a bug report.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
http://forums.adobe.com/message/5658455#5658455
search for mod files and you will find one or two other threads.

Adobe Premiere Pro hungs, does not listen to commands / Mac

I subscribe Adobe premiere pro for almost half a year and till now it was working perfectly. But for one week it has completely stopped reacting on any commands. I click "play" but it does not play, it hungs all the time. I tried to restart both Mac and programme but still Premiere is not working. Please anyone had this problem before and know how to fix it?
Thank you!

My normal use of Premiere Pro CC involves importing footage shot using either my Canon EOS5D Ml iii or my Panasonic FZ200. I import the footage using Media Browser. When I create a new project it always used to display the Media Browser screen on a second monitor. It also showed in the project settings that the renderer was Mercury Playback Engine GPU Acceleration (CUDA).
Since updating to CC2014 it is not uncommon for the second monitor to be inactive and the renderer to appear as Mercury Playback Engine Software only.
When I queried this with Adobe support they first of all took control of my PC and updated the graphics driver. This did not seem to fix the issue which they put down to my graphics card not being on the Adobe list of supported AMD and NVIDIA products.
I also spoke to the NVIDA support people and they confirmed this diagnosis.
Since then the circumstances vary. Sometimes the second monitor appears and the Mercury Engine Accelerator (CUDA) is active and sometimes not. I also never had the problem until I upgraded to CC2014.
I can live with this problem but would prefer if it wasn't there and I was running a supported graphics card.
My real question is which of the huge list of supported products would be best. The price range is vast and I do not want to overkill the problem by installing a card with features I will never need.
I do not play any computer games and am only really concerned with Premiere Pro CC, After Effects CC and Photoshop CC.
My use of effects in Premiere is limited although I do play around with Colour Correction and Sharping. I am also exploring the use of Lumetri.
My hope is advise from someone who has experience or knowledge of upgrading to a supported card.
Thank in advance and for the guidance from previous responders.

Premiere Pro CS4 does not handle AVCHD Files well.

Loaded the master collection of CS4 when it first came out. I had purchased CS4 for the AVCHD file format. I had no problems using Premiere Pro until I ugraded to version 4.0.1 in March of this year then all AVCHD file selections dissappeared. Hence, I could not create new AVCHD projects and the existing projects did not fuction properly. I have been through a series of uninstalls (and deactivations) and reinstalls. Reinstalls did not work. Had to delete by renaming the C:\Program Files\Common Files\Adobe\Installers\7e74552a59eaf9fafd13f90894ac9bd to get the reinstall to work. I have also used Windows Install Clean Up to remove all Adobe CS4 files that the windows "Add or Rmove Programs" did not remove. When I did get the reinstall to work, Premiere Pro would work for awhile then became slow to the point the project became unusable. Tried the all upgrades again and again the selection of AVCHD files dissappeared. I do not need the AVCHD Intra capability. The last uninstall I just uninstalled Premiere. I could not reinstall Premiere until I uninstalled the entire master collection than the reinstall of just Premiere succeeded. Premiere was totally unusuable.
Has anyone had similiar issues with Premiere Pro and AVCHD files and were you able to resolve the problem? I am considering removing all Adobe products, including past versions and trying the reinstall again, or create another profile and install just the Adobe products, or - the last resort - reformating my hard drive and starting over again. I would like to get Premiere Pro working again properly before reformating.
Previous versions of Adobe have worked with no problems.
Computer profile:
Windows XP sp3
5 hard disks each with 300 mb free
Intel Quad Core @2.4GHz each
4 GB of Ram
NVIDIA GeForce 8800 GTS

You might do a "this forum" search at http://forums.adobe.com/community/premiere/premierepro_current to check on the revert to trial problem
I have CS5 so read there, and don't REMEMBER any such complaints
You do know that CS5 is 64bit only... so you will need to get Win7 64bit... and have a 64bit motherboard?
The computer I built is linked to in My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0

Premiere Pro CS4 does not import EX1 files longer than 1 hour

I had to record a long speech and used a Sony XDCAM HD EX1 camera with a 32 Gb and a 16 Gb SXS cards. The speaker paused after 1h 26 min. I stopped the recording and waited until the green light that allows recording the segment came on. Later I recored smaller segments.
I copied all the recorded files to the PC hard disk ( Intel Quad Core 2.4 Ghz with 3.25 GB RAM with XP Proofessional SP3).
I used Sony Clip browser to watch the clips and all of them were perfect. Then I opened premiere Pro CS4 4.21 and I wanted to import this 27 GB file. In the media browser appeared only one mp4 file. All the short ones where imported normally but the big one freezed premiere and the only way to close premiere was with the windows task manager.
I checked again in the Sony XDCAM clip browser version 2.6 and you can see it perfectly. There was a detail, though: in the lower part of the preview window I saw 6 marks. When I checked the file in the disk, I found that the 27 Gb file was separated in 7 parts. Each of them was 3.51 Gb and the last one 2.5 Gb. That means that the file was cut in pieces that were less than 4Gb supposed max file lenght.
I tried many ways to import and no result. The I used the "export " of the sony clip browser. There is one choice that is "MXF for XDCAM HD". When I chose this item another panel appeared and showed a 1440 X 180 59.94i 25Mbps choice. I took it and after some time it created the 27 Gb file that I could import it normally with 4 audio tracks. But there is a drawback a "media concept" logo appeared to remeber to "buy" the program.
Anyhow, the question is: How can I import to Premiere CS4 a MP4 file created by a Sony EX1 HD camera whose lenght is more that 1 hour long ?
Thanks
Wolfgang

I think is the contrary because the clip browser copies all the foleders needed. I got this opinion from another forum that copies into Final Cut:
"My workflow is to create a hard drive folder for the project, then use Clip Browser to import the clips from the card. I review the clips, labelling them, adding logging notes, setting the status and putting in essence marks as needed (the number of characters available for the essence mark description is fairly limited). I then open FCP, create and save a new project then call up XDCAM Transfer. I select the project folder and it will pull in all the clips. I then filter for OK status, occasionally create subclips then import. The clips come over to the bin, with their names and with the essence marks converted to markers. Obviously there are backups taken - I've not mentioned them."

Adobe Premiere Pro CC does not open project - just hangs, no error message

I've just finished editing a project in PP CC, saved it, then tried to reopen it and the program shows a blank page, then hangs. I get no error message.
The project is based off a PP 5.5 timeline. It updates fine (and in fact I can open and convert the original timeline with no problem). However, once I close the new version and try to reopen, this symptom occurs.
I have updated my Creative Cloud software and it shows the Premiere Pro is up to date.
My computer is an ASUS laptop running Windows 8.1 Pro
i5 processor
8GB RAM
NVidea Geforce 610M+2GB graphics card
Need help as I have to have this project output and uploaded by 8am tomorrow.

This is a follow up to my original post and follow up. I've now seen this issue several more times and realize it was not an issue with my USB drive. It is an issue with the Dynamic Linking in Premiere. I consider this a MAJOR BUG, so please note what I've found if you have an issue with archiving or opening projects done with previous versions of PP.
The issue I've found is that Premiere seems to lock up trying to find dead media links. If you've archived a project or moved files from their original position, Premiere CC cannot seem to find them. The result is not a system hang up, but just a blank screen. In some cases, after leaving it for a couple hours it found the media and continued.
I've had a similar issue when trying to link 'dead' media with the actual files. The system goes off into neverland.
The work around I've found is to import the older jobs into a new Premiere CC project. At that point, replace any dead links (do NOT try and find the media as you'll be lost in hangupville) by importing the media again and replacing the clip in the sequence with the new import from the bin. Once all your media is 'live', remove any unused media from the project and confirm there are no 'dead' links (you can look at the media icon and notice a ? if they are not dynamically linked properly). Manually clear any remaining unlinked media. Save the project.
I have started to use Project Manager to archive all Premiere projects when moving them from one server to another.
This is a total pain in the @ss, and nothing I've seen before Creative Cloud. I hope that Adobe gets this resolved or I may consider dropping my subscriptions completely. That is a huge investment, but this type of issue is too much trouble to manage for a small production company.
I welcome any other thoughts, fixes, or comments.

Premiere Pro CS4 DOES NOT RENDER! HELP

So i took some footage with my Samsung Galaxy SII and started a project. I went into effects and then motion to get rid of the black bars and turn the video the right way around. On the screen at the top left the video was what i wanted, however the top left screen was not exported, what i ended up getting was a the same video turned around.
Can anyone give me instructions or something on how to save the effects you made onto a sequence. this is the first time ive used PPro. All i need to know is how to make the video that i import from my phone have normal video dimensions (no black bars) and be turned the right way around, and then how to export it. please help.
cheers,
Jordan.

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainspector.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679

I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.

I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are there OK. Any suggestions?

I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are in there OK. Any suggestions?

It won't show up on your Apple TV until it is fully downloaded into iTunes on your computer, have you done this.

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Refer below link once
App doesn’t open | Progress wheel spins continually

Question: Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages? - Problem: I have 1400 e-mails with attachments that need to be conv

Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
- Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
System: PC Windows 7 using Acrobat X Prof. - Thank you!

Hi ,
There is an option of embedding index for faster search while converting email to a PDF .
However I am not sure that will serve your purpose or not .
I would recommend you to get in touch with Microsoft support as well .
Meanwhile I'll work on it and get back to you in case I get a desired solution .
Regards
Sukrit Dhingra

What are the different ways to back up your photos from iphoto using a MacBook Pro which does not have a disk drive?

What are the different ways to back up your photos from iphoto using a MacBook Pro which does not have a disk drive?

Note - that no internet backup service has been proven to be safe and effective for backing up the iPhoto library - unless you personally have backup uyp an iPhoto library and restored it sucussfuly form one it should not be recommended - a large number of people have lost their photos trying it
LN

I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?

I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?

You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you. But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Premiere Pro CC does not embed 708 captions in QT

Similar Messages

Maybe you are looking for