Premiere pro CC drop playback after update 7.2.1

Why premiere pro cc drop playback after update 7.2.1? I have a MacBook Pro late 2011 with ATI Radeon HD6770m 1GB. Premiere pro cc 7.1.0 run normal, ok, without crashing and drop-freeze frame, but after update 7.2.1 i have all this problems.

Just came on here to post about the buzzing transitions, glad to see it's been fixed already!
Another thing though I don't see mentioned, since moving to 7.2 I find audio playblack is out of sync while editing, and in some clips significantly more noticeably than others. This only happens during playback, if I pause and scrub manually, the audio is perfectly in sync. This actually messed up a  project for a client. I thought the audio off the camera was  out of sync in one segment so I bumped it a few frames before exporting. Didn't check it after of course and sent him the file, then got a reply back that it was out of sync in that spot. Check the exported video and sure enough, he was right. Check it again in project but it looks in sync. So I bump the audio back in the timeline so that it LOOKS out of sync again during playback, but the new exported video is perfectly in sync!
Editing a TV show now with hundreds of clips and it's maddening with some looking fine, some looking a little off, and some looking completely off and having to manually scrub to check and be sure along the way.
Hopefully this is also fixed in this update..will see tomorrow.

Similar Messages

  • Premiere Pro CS6 Capture Error after update

    After updating Premiere Pro CS6 I can't capture with the Sony HVR-M10E (HDV MAZ) anymore. The tape-deck is connected to the computer via firewire. Using OSX 10.7.5. System message: Critical Error. Premiere CS6 is not responig in any way. Please help!

    Some troubleshooting ideas...
    http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html
    -and http://forums.adobe.com/message/4708997

  • Premiere Pro begins dropping frames after a few hours of editing

    Is anyone else experiencing this?  I'm running Premiere CC on a new iMac 27inch and after a few hours of editing both the source monitor and record monitor begin dropping frames at a pretty high rate. The only way I have found to fix this is to shutdown the computer. But in a few hours, I'm back to dealing with dropped frames. My iMac is tricked out with I7 processor, 32 gigs of ram, and an nvidia graphics card with 2 gigs of ram.  I am editing with raw files from a Canon 5D, but the edits are pretty straightforward, nothing too complex. Does anyone know a fix for this?

    since your name is sun baked...it could be you live in a hot area...could this be heat related ??

  • Premiere Pro Dynamic Link to After Effects stopped working

    For about 6 months my Link between Premiere Pro and After Fx is not working. Premiere Pro sends it to After FX but when it is there the composition is empty and no media has been exported, even though the PP timeline is marked as a linked compostion. Its entirely empty, the media has vanished.
    Id love to fix this issue. I guess it's a reinstall???
    Latest CC, 10bit BM uncompressed timeline, Maverick (though it wasnt working on snow leopard either).

    Sorry guys, may have just found the problem! Just realised that somehow my CC version on my disk is not listed as downloaded in my Cloud drop down pane. So im updating it and im assuming that will fix the problem.

  • Why is Dynamic Link between Premiere Pro CC 2014 and After Effects CC 2014 not syncing audio changes?

    When I try to use a Dyamic Link between something I've cut in Premiere and a composition in After Effects, if it is simply an audio level change it will not update in AE.  Only if I alter the Video track does it then take the changes reflected.  Any suggestions as to what is causing this?
    Running Adobe Premiere Pro CC 2014 and After Effects CC 2014.

    As Dave alludes, AfterEffects is all about the visual changes ... or at least, mostly. For changes to the audio outside of PrPro's internal controls, highly suggested you use Audition instead. It is all about the sound ... and yes, will update PrPro when used correctly.
    Neil

  • Adobe Premiere Pro CS5 5.5.2 update now available

    The Adobe Premiere Pro CS5 5.5.2 update brings Mercury Playback Engine support for NVIDIA ‘Maximus’ configurations, where a Tesla card can work alongside a Quadro card for increased GPU processing power. The update also fixes issues which prevent the proper display of Closed Captions and the Timecode Effect, and fixes the Color Picker on Mac OS X 10.7 (Lion). In addition:
    • Mac: Fixed an issue where the Timecode Effect was not displayed properly when rendering/exporting to a new file (2977326)
    • Mac/Win: Fixed an issue which could cause Closed Captioning data to be displayed in the wrong location, and sometimes offscreen (2927519)
    • Mac: Fixed an issue which could cause Assert errors when enabling the display of Closed Captioning data (2977314)
    • Mac: Fixed an issue where the Color Picker did not pick the correct color (2977304, OS X 10.7 only)
    • Mac/Win: Fixed an issue which could cause the application to crash when trimming with third-party I/O hardware installed (2984420)
    The update is available on Adobe.com at:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5285
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5286
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5287
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5288
    And it will be available via AAM within the next day or so. Enjoy!
    Sheri

    Todd_Kopriva wrote:
    > There was a FIX promised for this issue almost 6 months ago.
    Please point me to where you saw this.
    What I do recall is us saying that we were likely able to fix some DSLR scrubbing/playback issues in an update. We did. There was a major improvement in scrubbing/playback for DSLR files. The issue that we weren't able to fix in the update was the issue in which the decoding of some Nikon .mov files was done using QuickTime instead of the native decoders. But all that you need to do to get around that is change a file-name extension.
    Ok, so maybe a fix wasnt promised for this. Maybe 3 months ago when a fix was being worked on and should be released soon, that isnt a promise. 
    This is like using a spare tire on a car.  Would you pay for a car and then use a small spare tire for three months on it, cuz its a workaround thats kinda simple?  Maybe thats not a relative comparison. Maybe this is extremely difficult. It was working fine in cs5 premiere tho. So I guess im just gonna have to drive around with this piece of .... spare tire until you guys decide to actually fix this problem.  I will however not be upgrading future releases if this is the way you handle bugs. 
    Ive had this issue since day 1 of upgrading. That was May 2nd I believe, cant remember the exact release date. Thats 6 months of waiting for a fix for this problem. Workarounds are dumb, I didnt pay for software for workarounds.

  • Adobe Premiere Pro CS4 4.1.0 update  not working!files wrong size too?

    when i go to download Adobe Premiere Pro CS4 4.1.0 update it says that file size is 30.5MB but when it starts downloading it it says thats the file size is 110mb and once installed it wont let me import VOB files.  Has anyone got a solution?
    Thanks

    Other users have reported having trouble with VOB files from DVD recorders.  Properly authored DVDs work.
    Where did you get the VOB files that won't work for you?
    -Jeff

  • I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function works

    I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
    Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
    The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
    I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem.  I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
    I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
    I am in film competition overseas and need to have deliverables in less than a month's time.  I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
    Any assistance would be greatly appreciated.

    Still getting software freezes but found a way to mitigate for the mean time.
    Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
    You will want to highlight Adobe QT32 Server.exe
    Right click and select "End Process Tree"
    You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
    If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
    CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
    Right-click to "End Process"
    No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
    Hope this helps until the bug is fixed.

  • Premiere Pro Update Failure: Adobe Premiere Pro CC 2014.0.1 Update Installation failed. Error Code: U44M2P7

    Hi,
    I can't seem to update Premiere Pro. I get the following message:
    Adobe Premiere Pro CC 2014.0.1 Update
    Installation failed. Error Code: U44M2P7
    Have tried the patch, no dice. Need to avoid re-install.
    Would like an Adobe staff member to step up and help out on this.
    Thanks

    U44.. update error http://forums.adobe.com/thread/1289956 may help
    -more U44.. discussion http://forums.adobe.com/thread/1275963
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
    or
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • How to work with Premiere Pro cs5.5 and After Effects cs5 together?

    I have edited my movie in premiere pro cs5.5 and made the rough cut. In premiere, i have edited the video, put in soundtrack and foley. Now, i need to add muzzle flashes & blood splatters in some scenes and final color correction using After Effects cs5.
    When i import the premiere project in AE and make the changes, and then i export it back as premiere project. When i open this prmiere project, it shows vaious kind of errors and no changes are retained that i did in AE. Also, when i import the premiere project (which has 4 different sequences) in AE, all the media that has been imported in the premiere project also opens in AE making it difficult to organize the media.
    How should i work now so that i add vfx and color correction using AE cs5?
    I thought of exporting the video from Premiere pro and then open the video in AE and add vfx to some scenes and color correction to the full video and render it out again. But, this is the first time i am using AE and i am not sure if this is the best way. PLEASE HELP.
    Or, i could import the whole project in AE, add vfx, do color correction AND then export to video from AE. But i think, it will be better if i export the video from Premiere as it has loads of options to choose from while exporting to a movie.
    The dynamic link does not work between Premiere Pro Cs5.5 and After Effects cs5. Even if it does, its not working on my pc.
    All the footage is in HD and i want the final result in best quality HD too. PLEASE Help!

    If you are working between After Effects and Premiere Pro but with versions that are not the same number, you need to just work with movies rendered and exported as intermediate, lossless files.
    Dynamic Link only works between After Effects and Premiere Pro of the same version number, and only when they are installed as part of the same suite.

  • Sorry, we've tried to update Premiere Pro cc 2014 but the update failed. Now the option Retry doesn't work. There is other options to solve the problem? Now premiere don't start at all. Thank you in adva

    Sorry, we've tried to update Premiere Pro cc 2014 but the update failed. Now the option Retry doesn't work. There is other options to solve the problem? Now premiere don't start at all. Thank you in adva

    Use the Adobe Cleaner Tool:
    https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  • Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

    Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

    Thanks Todd for all the info.  It is much appreciated and very helpful.  On a different note, could you possibly direct me to the correct forum to fix this bug?  I am suddenly recieving a warning on my System SSD referencing Adobe Exchange.  Here is a screen grab to best explain:

  • Premiere PRo CC Clip durch After Effects Komposition ersetzen funktioniert nicht

    Wenn ich von Premiere aus einen Clip über die Funktion " Durch After Effects Komposition ersetzen" bearbeiten möchte, öffnet sich AE, legt ein neues Projekt an das ich dann auch speichere. Der Clip wird im Projektfenster auch angezeigt allerdings mit einer schwarzen Oberfläche. Wenn ich den Clip dann ins Kompositionsfenster ziehe wird eine neue Komposition angelegt aber das Vorschaufenster bleibt schwarz.
    Wenn ich einen Clip den ich vorher aus Premiere exportiert habe und den dann in AE importiere funktionerts. Kann mir da jemand weiterhelfen????

    Geht leider immer noch nicht. Kann zur Zeit nicht auf Forum zugreifen.
    Am 12.01.2015 10:53 schrieb "Doc Maik" <[email protected]>:
        Premiere PRo CC Clip durch After Effects Komposition ersetzen
    funktioniert nicht  created by Doc Maik
    <https://forums.adobe.com/people/Doc+Maik> in Deutsche Foren - View the
    full discussion <https://forums.adobe.com/message/7087075#7087075>

  • HT204347 My MacBook Pro won't restart  after update to lion

    My Mac book pro won't restart after updating to lion ! Said problem a cured at startup press any key ! No Goodrich

    Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.

  • Your thoughts on Premiere Pro CS5 (5.0.2) update thus far?

    The Premiere Pro CS5 (5.0.2) update is available.
    Have you installed it?
    Does it improve your editing experience? Make it worse?
    Does it add some new feature that you like or needed?
    How does it feel?
    Etc.
    Thanks,
    Dennis

    Hello Dennis
    I find Premiere CS5 to be the most stable software Adobe has ever released, my computer completely flies now.
    Just want to thank you for a great job with CS5 and your presence on the forum.
    Best regards
    Mikael
    Sweden
    My spec:
    Intel i7920
    Asus P6T Deluxe V2
    Corsair 12GB DDR3
    Nvidia GTX470
    Adaptec raidcard 3085 with 4x1000GB seagate in a raid 5 (external case).
    Windows 7 64 Ultimate
    C drive Intel SSD G2 80GB

Maybe you are looking for

  • Function to convert string to number

    Hi there, I wrote a function which converted a hor minute component of a date to a number. Now I need to do the same with a string (because the hours could be more then 23:95). Anyway here is my function. How can I rewrite it so it will accept a stri

  • Found my iPod touch after 3 months, now I can't unlock it.

    I can't for the life of me remember the password, and now it says "iPod Disabled; Connect to iTunes". Now the big problem is that the computer I was syncing it to before crashed on me and I had to get a new one. iTunes won't show the iPod until I unl

  • 10.2.0.4/10.2.0.5 Hot Backups (11r2 considered too) - ORACLE_HOME

    Scenario: We have a script that runs a hot backup of each database on a VM server. Because there are multiple databases on the VM we have a mixture of database versions. For example, we might have 8 databases on Server A running 10.2.0.5 and we might

  • Newsstand background download web service

    what will be the appropriate webservice format for background download multiple issue in Newsstand?

  • ITunes on my MacBook Pro will not detect my iPad

    I have a MacBook Pro and the latest version of iTunes - it detects my iPhone 5 but will not detect my iPad (2). I want to back up my iPad on iTunes because my iCloud is full, and I am thinking about getting a new iPad. Any suggestions??