Premiere Pro CC Error after launch

Premier Pro launching, once we choose New Project or an existing project, it will then error out and say program encountered an error and will now close.
Windows Error Log:
Error Log:
Faulting application name: Adobe Premiere Pro.exe, version: 7.0.1.105, time stamp: 0x51cbdef8
Faulting module name: ntdll.dll, version: 6.1.7601.18229, time stamp: 0x51fb164a
Exception code: 0xc0000374
Fault offset: 0x00000000000c4102
Faulting process id: 0xfc4
Faulting application start time: 0x01cef50d851272e4
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC\Adobe Premiere Pro.exe
Faulting module path: C:\windows\SYSTEM32\ntdll.dll
Report Id: cfb5162f-6100-11e3-baa5-844bf5981202
Adobe After Effects CC opens without an issue and so does Adobe Media Encoder CS6.
We had an issue where we had to update the video driver on the laptop because of a BEX64 error as well.
Just wanting to see if anyone has seen this one before.

That exception code led me to this thread on Microsoft.com: http://answers.microsoft.com/en-us/office/forum/office_2010-office_install/office-products -crashed-upon-launch-0xc0000374/9eb1251f-5a7d-4401-a955-155ac432e6ea?auth=1.
Of the culprits identified there, I'd wager the most likely one with Premiere would be third-party plugins.

Similar Messages

  • Premiere Pro CC won't launch after the splash screen on my new laptop

    Got a new laptop from ASUS recently. It has the Geforce GTX 860M, which I know is not offically supported yet, but I've never had problems running Premiere with unsupported cards before and I've read about other people who've made it work. I've tried uninstalling and reinstalling using the CC-app several times, to no success.
    The problem manifests in two ways. Either the splash screen comes up and when it disappears, nothing happens. It's as if I never opened Premiere and I can try again with the same results. Either that or Premiere opens, I get a windows error message which says there has been an unexpected problem and Premiere had to close. No other explaination.
    I tried updating the CUDA-drivers as suggested in another thread, and that worked ONCE, but Premiere wouldn't open again after that.
    I have to make a decision on whether to keep this laptop, which in every other way is perfect and runs other Adobe-products fine (except raytracer in AE, but I can live without that until the card is supported), or keep another laptop with the 770M and which is not as powerful and "future proof".
    Any good ideas out there would be much appreciated!

    Does your laptop have two graphics adapters?
    Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
    IF YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

  • Running Premiere PrO cs6. After upgrading to Yosemite 10.10.2 Adobe Premiere wont run, come up with system error and shuts down. Any one else had this issue?

    Running Premiere PrO cs6. After upgrading to Yosemite 10.10.2 Adobe Premiere wont run, come up with system error and shuts down. Any one else had this issue?

    can try this Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)

  • Premiere Pro not loading after splash screen, can't find fix on forums.

    Fresh install, doesn't matter what I do to this machine, memcheck came out ok. I click on Premiere Pro CS3 icon loads splash screen, then kicks out an error code.
    EventType : BEX P1 : P2 : 0.0.0.0 P3 : 00000000 P4 : unknown
    P5 : 0.0.0.0 P6 : 00000000 P7 : 00000000 P8 : c0000409
    P9 : 00000000
    I have a fresh install of window XP home edition service pack 3, 3 gigs of ram, Ati x1200 on board memory, (also have a nvidia 8800gt that I thought was the problem...it's not.) Most up to date drivers. Running two sata hard drives both 250 western digitals.
    system information
    OS Name Microsoft Windows XP Home Edition
    Version 5.1.2600 Service Pack 3 Build 2600
    OS Manufacturer Microsoft Corporation
    System Name DESK
    System Manufacturer MICRO-STAR INTERNATIONAL CO.,LTD
    System Model MS-7327
    System Type X86-based PC
    Processor x86 Family 15 Model 107 Stepping 2 AuthenticAMD ~2494 Mhz
    BIOS Version/Date American Megatrends Inc. V1.6, 2/28/2008
    SMBIOS Version 2.5
    Windows Directory C:\WINDOWS
    System Directory C:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume2
    Locale United States
    Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
    User Name DESK\Auggie
    Time Zone Central Standard Time
    Total Physical Memory 3,072.00 MB
    Available Physical Memory 1.28 GB
    Total Virtual Memory 2.00 GB
    Available Virtual Memory 1.96 GB
    Page File Space 3.85 GB

    ok, one more time. I have a problem with Premiere Pro CS3 Crashing after the splash screen. It loads everything right on the splash screen, but when it goes to loading the work areas, it goes white and comes up with the error code of :EventType : BEX P1 : P2 : 0.0.0.0 P3 : 00000000 P4 : unknown
    P5 : 0.0.0.0 P6 : 00000000 P7 : 00000000 P8 : c0000409
    P9 : 00000000
    What ever that is.
    I have an amd 4800+ Dual Core and 3 gigs of ram. An Nvidia 8800gt with latest drivers installed for all of it. Running windows XP home sp 3 build 2600 More information on my system below.
    I've re-installed 3 times, and even tried a clean install of vista. I've done the hold shift while loading and get the same issue no matter what. I've Deleted the premiere folder in local settings.
    I've done all the steps at http://premierepro.wikia.com/wiki/Troubleshooting
    a screen capture from process explorer and cpu fan can be found here http://www.theslam.net/images/desktop.jpg
    DXdiag file can be found at
    http://www.theslam.net/images/DxDiag.txt
    hopefully this helps.
    OS Name Microsoft Windows XP Home Edition
    Version 5.1.2600 Service Pack 3 Build 2600
    OS Manufacturer Microsoft Corporation
    System Name DESK
    System Manufacturer MICRO-STAR INTERNATIONAL CO.,LTD
    System Model MS-7327
    System Type X86-based PC
    Processor x86 Family 15 Model 107 Stepping 2 AuthenticAMD ~2494 Mhz
    BIOS Version/Date American Megatrends Inc. V1.6, 2/28/2008
    SMBIOS Version 2.5
    Windows Directory C:\WINDOWS
    System Directory C:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume2
    Locale United States
    Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
    User Name DESK\Auggie
    Time Zone Central Standard Time
    Total Physical Memory 3,072.00 MB
    Available Physical Memory 2.36 GB
    Total Virtual Memory 2.00 GB
    Available Virtual Memory 1.96 GB
    Page File Space 5.84 GB
    Page File C:\pagefile.sys
    Name NVIDIA GeForce 8800 GT
    PNP Device ID PCI\VEN_10DE&DEV_0611&SUBSYS_06DC19F1&REV_A2\4&3B252A0E&0&0010
    Adapter Type GeForce 8800 GT, NVIDIA compatible
    Adapter Description NVIDIA GeForce 8800 GT
    Adapter RAM 512.00 MB (536,870,912 bytes)
    Installed Drivers nv4_disp.dll
    Driver Version 6.14.11.8122
    INF File oem2.inf (nv4_G9x section)
    Color Planes 1
    Color Table Entries 4294967296
    Resolution 1440 x 900 x 75 hertz
    Bits/Pixel 32
    Memory Address 0xFD000000-0xFDFFFFFF
    Memory Address 0xC0000000-0xDFFFFFFF
    Memory Address 0xFA000000-0xFEAFFFFF
    I/O Port 0x0000D800-0x0000D87F
    IRQ Channel IRQ 18
    I/O Port 0x000003B0-0x000003BB
    I/O Port 0x000003C0-0x000003DF
    Memory Address 0xA0000-0xBFFFF
    Driver c:\windows\system32\drivers\nv4_mini.sys (6.14.11.8122, 6.01 MB (6,301,248 bytes), 12/26/2007 4:35 PM)

  • Premiere Pro Windows crashing after recent updates

    Machine specs:  HP Z820 - zeon e5-2690 48gb ram quadro k5000.  Since the recent updates & complete wipe of the system & fresh install, Premiere pro CC crashes regularly without any pattern.  Using MXF files while editing if that helps-i did read a thread about that - but it was old.  This is a new problem.  The event viewer information: 
    Faulting application name: Adobe Premiere Pro.exe, version: 8.1.0.81, time stamp: 0x5426694c
    Faulting module name: mc_dec_mp2v.dll_unloaded, version: 0.0.0.0, time stamp: 0x53f72b76
    Exception code: 0xc0000005
    Fault offset: 0x000007feea381a30
    Faulting process id: 0x2168
    Faulting application start time: 0x01cfe7cdce8c2c97
    Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
    Faulting module path: mc_dec_mp2v.dll
    Report Id: ba9aeb2b-53c1-11e4-b3dd-24be05e2e6a2
    Audition has also started crashing as well.  Info:
    Faulting application name: Adobe Audition CC.exe, version: 7.1.0.119, time stamp: 0x5421531b
    Faulting module name: MSVCR110.dll, version: 11.0.51106.1, time stamp: 0x5098826e
    Exception code: 0xc0000005
    Fault offset: 0x000000000003c780
    Faulting process id: 0x249c
    Faulting application start time: 0x01cfe7ebfe3ea9e0
    Faulting application path: C:\Program Files\Adobe\Adobe Audition CC 2014\Adobe Audition CC.exe
    Faulting module path: C:\Windows\system32\MSVCR110.dll
    Report Id: 4d975a0f-53e3-11e4-b3dd-24be05e2e6a2
    Any Ideas?

    Re:
    Premiere Pro Windows crashing after recent updates
    Try finding  MSVCR110.dll  file on internet and replace it in the path C:\Windows\system32\MSVCR110.dll
    hopefully it works...

  • Importing from premiere pro cs5 to after effects cs5

    hi, can anyone help me with this problem?
    im editing some stuff in premiere pro cs5 and when i import it into after effects cs5 for colour correction and other effects all the transitions that i had from premiere will disappear. if someone can guide me step by step to this process it will be very helpful
    Thanks,
    Randolph Azzopardi

    As Mylenium suggests, there are many ways to move information between Premiere Pro and After Effects.They are all outlined on this page: "Working with After Effects and Premiere Pro"
    You didn't specify, but I'll assume as he did that you are exporting a Premiere Pro project from After Effects. That works by converting things from native After Effects to their equivalents in Premiere Pro; sometimes there isn't a good equivalent, so the conversion isn't perfect. The same conversion is done as is done for copying and pasting between After Effects and Premiere Pro. There's a set of tables that describe the conversions here.
    The way to get perfect fidelity is to either use Dynamic Link (as Mylenium suggested) or render and export a movie from After Effects and import that into Premiere Pro.

  • Bringing Premiere Pro project into After Effects

    I tried importing Premiere Pro projects to After Effects, but I only got the various files, not the timeline. I just watched a tutorial about Dynamic Link, but when I clicked Adobe Dynamic Link/New After Effects composition in Premiere, I got a layer that was all black, with no sound. I have CS3 Production Premium and Windows XP Media Center SP2.
    Right now, I just want to keep what I edited in Premiere, but I get better quality video if I export it to H.264 MOV in After Effects than anything I've found in Premiere. I can't understand why that's so, but until I find something just as good in Premiere, I want to save everything in After Effects.

    Create a project and a comp. Copy the timeline from Premiere Pro and paste it into the timeline of After Effects.

  • Importing Premiere Pro project into After Effects ???

    When I import a Premiere Pro project into After Effects, it splits every shot onto a new track, ending up with a couple of hundred tracks at the end.
    Is there a way to avoid this ?
    Particularly, since I'd want to keep the option of bringing the project file back in Premiere for further editing.
    My colorist suggested that I nest reels of my timeline and split it that way so that when he imports it he has nests on one timeline and the multiple tracks in each of those nests. Still, this feel very clunky.

    An editor at work was using our Avid to do a grade on a short promo and I
    wanted to see what I could do in After Effects. So when he was out of the
    office I exported the timeline as an AAF and copied the OMFI media. When I
    brought the project into After Effects I ended up with a massive number of
    layers and freaked at first at the idea of doing anything with it.
    However I thought about it again and decided to precompose all the layers,
    as this gave me just one layer to work with. I then added a couple of
    Adjustment Layers above it; one with a Levels effect added and the other
    with HSL. I also added Masks to the Adjustment Layers so I could vignette
    any effect.
    The key to working like this was to use Hold Keyframes at the beginning of
    each new shot for each effect, Mask Shape and Feather. I could then adjust
    that shot, scrub to the next shot add new Hold Keyframes adjust that shot
    and so on. When I wanted to repeat any effect settings on a shot, I just cut
    and pasted the relevant keyframes. Mixes across shots can be tricky but you
    can always go back to work with the original shots on their separate layers
    if you need to.
    I ended up with a quick grade that stood up nicely against the one done on
    the Avid and I only had work with 3 layers on my timeline!

  • Premiere Pro CS5 and After Effects CS5

    Hi I'm fairly inexperienced when it comes to Adobe products. I was wondering whether Premiere Pro CS5 and After Effects CS5 can be used together, for instance Premiere Pro to do the basic editing and After Effects to do some more advanced stuff before importing the clip back into Premiere Pro for exporting the film.

    Yeah.

  • Premiere Pro CC and After Effects CC work slowly together - much worse than CS6

    Premiere Pro CS6 and After Effects CS6 worked together really well.  I could have both programs open and make a change in After Effects, then go back to Premiere Pro and see the changes pretty quickly.  Since upgrading both to CC, I can't jump back and forth and see the changes quickly.  I literally have to hit Enter and render the After Effect clip after every freakin' time I make a change to it in order to see it without any pauses or jumpiness in the playback.  CS6 worked great.  I can't express my disappointment in the Creative Cloud "upgrade".   So many things are SO MUCH WORSE!!!   Adobe you have to fix this stuff.

    The speed of the connection is dependent on your hardware and the type of comp you have in AE.
    I haven't noticed any significant performance difference between the two versions (I've also been heavily using dynamic link since CS6 ).
    Some comps will play fine in Premiere, some comps will need rendering. I generally render the clip in Premiere, as opposed to AE.
    If the same comp from CS6 is behaving significantly worse in CC, then you might be on to something, but it is most likely a bug isolated to your hardware config and not a general CC issue.

  • Premiere Pro CC and After Effects CC - Dynamic Link of an .aep not working - Stalls during import

    I have been trying to import an .aep file into Premiere Pro CC from After Effects CC. As suggested, I import the file. The dynamic import window appears. It states connected to file along with the import files ... dialogue box. It stalls there.
    I have been working off my network and have all the files collected on my machine.
    My workaround to get me to deadline was to render my clips from AE and import them. Importing the .aep would make more sense from efficiency and workflow.
    Thank you

    Thank You, Jim -
    Unfortunately that specifically did not work.
    Based on another comment sent to me, here is what did.
    In PProCC
    File > Adobe Dynamic Link > New After Effects Composition
    In AECC
    From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
    Back in PProCC
    File > Adobe Dynamic Link > Import After Effects Composition
    Magic.

  • Premiere Pro Installation errors! Help me!

    I disables my firewall, Kaspersky , I'm the administrator of my computer and I tryed "Run As Administrator". but that didn't help.
    I'm using a 32-bit Windows 7.
    The installation stops very close to the start and says Installation Failed
    The error code:
    Adobe Premiere Pro CS4
    Error:
    Error 1625. This installation is forbidden by system policy.  Contact your system administrator.

    Hi,
    I'm sorry you're running into problems installing Premiere.  Would you mind reposting this issue over on the Premiere forums?
    Thanks,
    Chris

  • Adobe Dynamic Link will not work - Premiere Pro CS4 to After Effects CS4

    Hello,
       I am edited a video with a deadline, I'm importing a sequence from Premiere Pro CS4 to After Effects and making edits in After Effects. I'm able to import the Premiere Pro sequence into After Effects using Dynamic Link, but  I go back to Premiere Pro and nothing has changed. Then I have to export the 21 minute long video in After Effects and that takes about 12 hours, that I can't afford. I don't know what I'm doing wrong, before I imported the timeline into AE, while I was in Premiere Pro I right clicked it and selected -Edit original. It took me to the .mov that I imported- since it's a redo. I learned how to use Dynamic Link from this tutorial-
    http://tv.adobe.com/watch/learn-cs4-production-premium/using-dynamic-link/
    At first when Dynamic link didn't work I thought it was because I was cutting the imported Sequence from Premiere Pro in After Effects becasue I was motion tracking. When you import a Premier Pro sequence can you cut it into individual layers in After Effects? 

    I'm importing a sequence from Premiere Pro CS4 to After Effects
    That doesn't create the type of Link you want here.  In this case, changes made to PP would show up in AE.  You want the reverse.  (And you can only go one way, not both.)
    http://help.adobe.com/en_US/PremierePro/4.0/WS725e431141e7ba651172e081238226cdf5-8000.html

  • Arbitrary data param not importing from Premiere Pro project into After Effects.

    Hi,
    I have an AE SDK plugin effect that works in Premiere Pro and After Effects... the effect has a bunch of standard parameters and one Arbitrary Data parameter.
    I believe that the Arbitrary data parameter is implemented correctly, and I have implemented all of the cases for PF_Cmd_ARBITRARY_CALLBACK...
    PF_Arbitrary_NEW_FUNC
    PF_Arbitrary_DISPOSE_FUNC
    PF_Arbitrary_COPY_FUNC
    PF_Arbitrary_FLAT_SIZE_FUNC
    PF_Arbitrary_FLAT_SIZE_FUNC
    PF_Arbitrary_FLATTEN_FUNC
    PF_Arbitrary_UNFLATTEN_FUNC
    PF_Arbitrary_INTERP_FUNC
    PF_Arbitrary_COMPARE_FUNC
    PF_Arbitrary_PRINT_SIZE_FUNC
    PF_Arbitrary_PRINT_FUNC
    PF_Arbitrary_SCAN_FUNC
    The only issue I have found, is that when importing a Premiere Pro project into After Effects with the "Import -> Adobe Premiere Pro Project" option, the value in the Arbitrary Data
    parameter is always the default. There is no problem saving or re-opening projects within AE or PP... and there are no problems with cutting and pasting instances of the effect.
    Importing a Premiere Pro project into After Effects using the Dynamic Link works correctly... the Arbitrary data is imported.
    Thanks.

    Some kind of answer would be awesome... there are Adobe staff members on here right?

  • Premiere Pro CC2014 error ComponentFactory.cpp-69

    I tried to open a project that I started with CS6 and tried to open in CC2014. It contains prores422 .mov files, Premiere Pro Debug Event pop up appears with message,
    Premiere Pro has encountered an error.
    [..\..\Src\Component\ComponentFactory.cpp-69]
    I noticed someone (drbuhion Mar 19, 2014 1:07 AM) asked this question (Premiere Pro CC error ComponentFactory.cpp-69) and there was no answer. Any chance of resolving it?

    Thanks Mark. I just reinstalled Premiere Pro CC 2014 a few days ago and used the Adobe Cleaner to resolve a different issue this week. (It worked.)
    I had to start a project with a client’s laptop, which has CS6, then finish it at my home office, where I use CC 2014 (which I love). Granted, I’ll probably be in a jam if I have to edit it on that client’s laptop for some reason, but I don’t think that will happen.
    Oddly, a different project that I did on that client’s laptop with CS6 opened fine (which actually will benefit from the features of CC 2014).
    For what it’s worth, I worked around the problem by starting over with a new project to re-do the problematic one, using my PC with CC 2014.
    Bill

Maybe you are looking for