Premiere Pro CC features not showing up

I purchased a Creative Cloud membership today and was expecting the version of Premiere Pro to be different, particularly to have the feature that syncs audio in multpiple clips, but the software appears to be exactly the same. Are those new features I've seen in the videos not available yet, or am I missing something. How can I tell if I have Premmire Pro CC and not Premiere Pro CS6?
Thanks

How can I tell if I have Premmire Pro CC and not Premiere Pro CS6

Similar Messages

Premiere Pro 5.5 Not Showing Entire Recording

When I try to open a recording in Premiere to edit it it only shows the first minute or so of the video, while opening in other programs (MPC, VLC, etc.) renders the entire recording. VLC actually says the AVI is broken and needs to be repaired, and that there may be problems with seeking, but doesn't give any other information. It still works in VLC despite the error message however, and seeks just fine. I haven't had any luck researching this on Google so I thought I would try here and see if anyone else has experience this issue.

Ok here is the info.
Premiere Pro Ver. 5.5.0, no updates.
Windows 7 Professional, 64-bit
6GB of ram, Core i7 920
nVidia GTX 470
Not getting any error messages, I have a Canopus ADVC110 capture device that I'm capturing analog video with. I'm using the capture tool in Premiere with default settings, except that device control is turned off. I get no errors or notices when the capture is running or when I make the files. However when I go to import the clip into my timeline the duration is less than a minute long. When viewing the file in other program's it is fine, even in another editor like Vegas. I have several clips that exhibit the same behavior. Occasionally I have a clip that works fine without the duration issue, but I'm not sure why as none of the settings for the capture have changed.
The clip I'm looking at currently is roughly 15min long and shows up to be about 43sec in Premiere.
Video info
General
Complete name                  :
Format                         : AVI
Format/Info                    : Audio Video Interleave
Format_Commercial_IfAny        : DVCPRO
Format profile                 : OpenDML
File size                      : 3.19 GiB
Duration                       : 15mn 3s
Overall bit rate mode          : Constant
Overall bit rate               : 30.3 Mbps
Video
ID                             : 0
Format                         : DV
Format_Commercial_IfAny        : DVCPRO
Codec ID                       : dvsd
Codec ID/Hint                  : Sony
Duration                       : 15mn 3s
Bit rate mode                  : Constant
Bit rate                       : 24.4 Mbps
Width                          : 720 pixels
Height                         : 480 pixels
Display aspect ratio           : 4:3
Frame rate mode                : Constant
Frame rate                     : 30.027 fps
Original frame rate            : 29.970 fps
Standard                       : NTSC
Color space                    : YUV
Chroma subsampling             : 4:1:1
Bit depth                      : 8 bits
Scan type                      : Interlaced
Compression mode               : Lossy
Bits/(Pixel*Frame)             : 2.353
Stream size                    : 3.03 GiB (95%)
Audio
ID                             : 1
Format                         : PCM
Format settings, Endianness    : Little
Format settings, Sign          : Signed
Codec ID                       : 1
Duration                       : 15mn 3s
Bit rate mode                  : Constant
Bit rate                       : 1 536 Kbps
Channel(s)                     : 2 channels
Sampling rate                  : 48.0 KHz
Bit depth                      : 16 bits
Stream size                    : 166 MiB (5%)
Interleave, duration           : 966 ms (29.00 video frames)
And a screenshot of what I'm seeing in Premiere.

Premiere Pro CS5.5 Not Showing Correct Video in Sequence - URGENT

I have been working on a film that I need out by next Wednesday and for some reason Premiere is showing the WRONG videos in the timeline/viewer. I have done numerous edits in After Effects via Adobe Dynamic Link. It replaces other video with random clips I've done edits to in After Effects via Adobe Dynamic Link instead of the correct video file, either edited in After Effects via Dynamic Link or just a plain video clip without editing in After Effects. This is extremly frustrating in that I have to have the film out by next week and this has never happened before! Any response is welcome!!

when I try to open a changed name comp in After Effects, it automatically directs me to another project and I didn't even click open
Do you have multiple AE projects that contain comps with the same name? For example: Project01 contains comp01, and Project02 also contains comp01? If so, you'll have to sort that out as well. Give the projects and the comps in them unique names if they will all be used in the same Premiere Pro project.
Consider using a single AE project that contains all your linked comps -- it will make the Replace With After Effects Composition command in Pr less useful, but it may help simplify and organize things overall.
Once all of your AE projects and comps are re-named, you may have to go through your Pr project and manually re-link all of the AE comps. Maybe I shouldn't have said "everything will sort itself nicely".
Jeff

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC.

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC. They say it could have been a Windows update? Is anyone else having this problem and found a solution any suggestions.. Thank you.

Hello, thank you for your help. I finally was able to contact someone from Adobe on line.. It took about 1 hour on hold but I finally won the lotto...Lol. Pr.. /Project/Project Settings/General/ I had the (Mercury Playback Engine GPU Accelerated (CUDA) and not the (Mercury Playback Engine Software Only) It only took 1 second for Adobe to figure it out...Lol.
Although I have a high rated Nvidia card that did handle the software for some time after a hack, I believe a Windows update may have altered my Premiere Pro CS6 settings.
Video card is Geforce Nvidia GTX 765M non compatible with (Mercury Playback Engine GPU Accelerated (CUDA). Thank Ronin Edits and cvid01

Premiere Pro CS5 features - PC vs Mac

This isn't a PC vs Mac question. I have both PCs (Win 7) and Macs (Snow Leopard). Just wondering if there is any advantage to buying the PC version or Mac version of PP CS5 if considering the software only? Any different features on one version or the other? Any stabilityy/bug issues using one or the other? Thanks.

Hi Todd,
Thank you very much for your reply!
All the best,
K.
Date: Thu, 20 Jan 2011 06:55:25 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro CS5 features - PC vs Mac
Is that list of missing features for the Mac version of PPro CS5
still current, or has it been updated in the newer versions?
What is in the Help document should be current. (Sometimes you need to read the comments on a given page to see some updated information.)
Or are
there any plans for including these features in future upgrades of CS5?
If you want to see something added or changed, http://www.adobe.com/go/wish.
Do
you have any idea why these features are not included?
Premiere Pro came back to Mac OS only a couple of versions ago. At that time, porting some features over to the new platform was considered to be not quite worth it because the features weren't much used, anyway. In many cases, the effects and features that are on Windows only have alternatives that are available on Mac OS. Much of what didn't come over to Mac OS were obsolete effects; we need to keep them around so that projects created with them can still work in the new version, but in many cases there wasn't much point in reqriting them for a new platform.
I'd love to
start using the PPro CS5 on Mac, but I am worried about some of the
missing features, that are quite useful, eg. Camera Blur, Ghosting,
Color Replace etc...
As I said, there are alternatives-usually superior alternatives-that are available on Mac OS. For example, the http://help.adobe.com/en_US/premierepro/cs/using/WS5C347E48-575E-469b-852C-74494022A4AFa.h tml and http://help.adobe.com/en_US/premierepro/cs/using/WSC924856D-FA9A-41c1-A930-966D90CD245Fa.h tml effects are available on both platforms, so the lack of the Color Replace effect shouldn't be much concern.
But, again, if you want to see something added or changed, http://www.adobe.com/go/wish.
>

I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are there OK. Any suggestions?

I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are in there OK. Any suggestions?

It won't show up on your Apple TV until it is fully downloaded into iTunes on your computer, have you done this.

Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!

I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
Theo Smith

I sent the screenshot via an e-mail attachment. I wasn't aware that
attachments could not be forwarded this way. I will send it again. First time
I've utilized this service.
In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time,
[email protected] writes:
Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3
aspect ratio
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in Adobe
Media Encoder (AME) - View the full discussion
(https://forums.adobe.com/message/7264779#7264779)

Why won't premiere pro cc will not let me add an adjustment layer

why won't premiere pro cc will not let me add an adjustment layer

Glad that you got the adjustment layer issue worked out. Not quite enough info to troubleshoot the other problems. The following page outlines the kind of info that helps zero in on the cause of such problems: FAQ: What information should I provide when asking a question on this forum?
As to the cache files and rendered previews, you do not need to keep them. Premiere will regenerate them as needed. Because re-conforming the audio and re-rendering the sequence takes time, you probably want to keep those files around for the current project--unless, of course, you have reason to think that the cache or render files are causing problems.
To keep things clean and get the attention of more people, it would probably be best to start a new thread for the other issues.

Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

Why is the Nvidia GTX 680 CUDA card supported by Premiere Pro CC, and NOT After Effects CC?

Thanks Todd for all the info. It is much appreciated and very helpful. On a different note, could you possibly direct me to the correct forum to fix this bug? I am suddenly recieving a warning on my System SSD referencing Adobe Exchange. Here is a screen grab to best explain:

PreludeCC and PRemiere Pro CC will not update error: " log Transport 2"

PreludeCC and PRemiere Pro CC will not update . update gets to 62% and then quits with the following error code "Log Transport 2"
System
OS 10.9
MacPro 3,1
All other apps do update.

HI Steve & Perry,
Have you tried restarting the machine and applying the updates again ? If yes, are you still getting the same error message ? If yes , could you please share a screen shot of the error that you get ?
Cheers,
Kartikay Sharma

Why "stop download video" feature not show when playing video

why "stop download video" feature not show when playing video,, i hope you can give me Solution for this problem because when i using 3g internet, it downlaod the video Quickly ,,, so it consume the Balance

Do you have Flash installed? Check HD > Library > Internet Plug-Ins
If the Flash Player app is not in the Internet Plug-ins folder, download and install from here.
When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu 
Troubleshooting advice can depend on that information.

AU pro 53 is not showing up in logic

Hi !
AU pro 53 is not showing up in logic audio instrument chanel...
Its only plays as a stand alone, outside of logic.
Maybe I have files to drop in a certain folder in order to make pro 53 work as a plugin AU
thanks

Must be UB or the standalone version would not be there either I think.
No, if it's PPC, the standalone will still work because OSX will run it under Rosetta (albeit slowly, but invisibly).
The plugin won't show up, because it needs to be Intel code to work on Logic running on an Intel machine.

Premiere Pro CC features list and video tutorials show syncing of video clips by waveform. Why?

This feature is not present in Premiere Pro CC, so why does the features list boast it? Why do the online tutorial videos show options that don't exist?

Despite one of the touted benfits of Cloud Cuckoo being the rapid implementation of innovations, you will have to wait until June the 17 for this particular feature, as the true CC is not released until then.
I should be very interested to know, in a round figure, the exact number of instant innovations those who subscribed to the initial offering of Premiere via CC have received during the past year. Sarbanes-Oxley no longer provides a fig-leaf!

Rotate movie feature not showing up after installing quick time pro key

I installed Quick Time 7 Player for Windows and then entered my Quick Time 7 Pro registration code. When I open a movie, recorded on a Sony Cyber Shot camera, movie editing features are not showing up. I need to rotate my movies 90 degrees and that was the sole purpose of purchasing the pro addition.
After reading through pages of on-line support resourses and endless calls for technical support (and receiving none), I am still unable to figure out what's going on. Any ideas? Thank you for your help and insights in advance.

Sounds like you are trying to edit muxed mpeg files, the editing of which QT PRO does not support. It also will not export the sound from such files. If they are mpeg-1 you can use Mpeg StreamClip to edit or export them. If they are mpeg-2 you would first need to buy the mpeg2playbackcomponent. With that component installed mpegstreamclip will also edit mpeg2 files.
Message was edited by: Dick Napoli

Premiere Pro CC features not showing up

Similar Messages

Maybe you are looking for