Premiere Pro CC gradually slows down, then crashes, but won't quit all the way. Corrupts project, and hangs when trying to open it.

Working on a project, updated to newest Premiere last night. This morning my project had terrible performance on playback, and eventually the viewer froze on one frame (though audio continued to play back). Every time I try to open it now, it freezes. Really screwing me over, as this project is one a time line. Any suggestion for trouble shooting?

Here's a screenshot of my library folder:
No quicktime.

Similar Messages

  • My MacBook pro has gradually slowed down to a halt since installing lion. The spooning rainbow is still going after an hour and it won't force quit. Anybody know what to do? Ps new to this! Thanks in advance.

    My MacBook pro has gradually slowed down to a halt since installing lion. The spooning rainbow is still going after an hour and it won't force quit. Anybody know what to do? Ps new to this! Thanks in advance.

    http://www.apple.com/support/macbookpro-videoissues/

  • My macbook pro won't load all the way when I start it up.

    Lately, my mac book pro has been slow to use, and the colour wheel pops up often. I shut it down earlier today, and now when I try to start it up, it won't load all the way. When I do manage to get to the homescreen, the applications and toolbars won't load. Any ideas what the issue might be and how I can fix it?

    It could be a number of issues, Fred.
    Have you optimized your photos to no larger than 1000x750 pixels, per the FAQs to the right of this forum? Oversized photos are the chief reason for these types of failures.
    http://forums.adobe.com/thread/431851?tstart=0
    You also say your videos are MP4s. Are these AVCHD video or are they from a "webbie" camcorder, such as the Flip cam? Flip video uses a proprietary codec that often jams up video editors. This is also covered in our FAQs.
    http://forums.adobe.com/thread/437535?tstart=0
    Finally, have you ensured that the drive you are saving your video to has adequate free space and is freshly defragmented? You should always have at least 30 gigs of free space on your drive plus 30-50 more for each hour of video you're outputting.
    And, if you are exporting to a drive other than your C drive, you should ensure that the drive is formatted NTFS rather than FAT32. FAT32 drives have a file size limit that often chokes video output.

  • I have my Dad's apple ID etc, but he has an iphone and i have an Ipod Touch then on IMessage i can read all the messages he recieves and sends and he can read all the messages i send and recieve how do i stop this?

    Hi
    I have my Dad's apple ID etc, but he has an iphone and i have an Ipod Touch then on IMessage i can read all the messages he recieves and sends and he can read all the messages i send and recieve how do i stop this? But i still want to send messages to him.
    Thank You

    . You do not need a seperate Apple ID. One one device you just need to go to Settings>Messages and add another/different Messaging email address and delete the common Apple ID address. Also see:
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

  • Just downloaded book but did not get all the way down now cant play it  any answers

    just downloaded book but did not get all the way down now cant play it  any answers

    in iTunes, access your purchase history via your account in the iTunes store, find the file in question, and click on the report a problem button. report the problem. more info in this support article. 
    clicking here  should take you directly to your iTunes store log-in window.

  • Premiere Pro performance suddenly slowed down to be virtually unusable, even for simple projects

    I'm running latest Premiere Pro update on a late 2013, 27" iMac, with a 3.4 GHz Intel Core i5 processor with 8GB RAM, Mac osX version 10.9.5.  I know that's not a lot of RAM, but up until the past week or so I was able to edit an hour-long 4K project with that configuration, as long as I ran the Premiere session at 1/8 resolution.  It did drop some frames if I tried to play a long piece of it without stopping, but it was workable for editing purposes.  But in the past few days, the session has slowed down to the point where it starts serious frame dropping from the moment I push play, and is basically unusable.   It also drops audio, and I can hear the drives clattering frantically as soon as I hit play.   My media is on 2-TB G-drives connected via USB3.
    What I've tried so far...
    - Ran diagnostics on the drives, and it found no errors.
    - Tried linking the project to the identical files on the backup drive.  Same problem. 
    - I made sure my Mac's energy saver settings were set so that the drives never go to sleep.
    - I deleted all the media caches and Premiere preview files I could find.
    - I reset the Spotlight privacy settings so that they do not index any external drives, and only a few folders on the internal drive.
    - I made sure I'm set to devote the maximum amount of memory (6.5 GB) to Premiere.
    - Finally updated my Premiere software to the latest version.
    None of these things made any difference. 
    - Then I thought maybe the session had just gotten too big and bloated for my system to handle.   So I made a new project and imported a simplified version of just one sequence, which only references some of my color-corrected video files.  That way I only have to have one external drive connected, and the session is referencing much smaller files.  Still no improvement.
    - So I tried an experiment where I made a brand new Premiere project and sequence.  I imported just 5 video files into it.  The largest file was less than 3GB.  (I do Protools editing on that computer with files much bigger than that, on the same type of extermal drives, with no issues at all.)  With only a single 5-second video clip (and no audio) in the timeline, it still starts dropping frames after about 2 seconds.  If I put another 5-second clip in the timeline, the frame dropping gets twice as bad.  If I try to put a video crossfade on them, playback gets so jerky it's unwatchable.
    So basically, I started out being able to edit a 60-minute long 4K video project with video transitions and multiple tracks of audio and video.  (It wasn't perfect, but it was workable.)  And now suddenly, I can't play a brand new session that has 5 small video clips in it, and no audio.    So it's not just my project or sequences that are the problem.  Premiere just no longer seems to be able to access and play back my media with any kind of speed.
    What am I missing?  Can you give me some additional suggestions to try that I haven't already mentioned above?  (And yes, I know a lot of you guys probably consider my hardware setup completely insufficient for what I'm doing, and you're probably right.  But it was working well enough for me up to this point.  I'm so close to the end of my project, and I'm really just trying to get back to the functionality I had a week ago, so I can finish.)
    I'd appreciate any suggestions.  I feel like I'm running out of things to try.

    After a lot of troubleshooting, it appears the problem is related to the color corrected version of my video not being able to play back fast enough.  While my system had no issue with the raw 4K camera files, the increased color depth of color corrected Pro Res versions are just too much for my drives to play back in real time, even at low resolution.   Unless I want to do considerable system upgrades (which I don't), the solution is to keep my color corrected and non-color corrected video stacked on top of each other in the timeline, and to deactivate the video track containing the color corrected ones.  Of course, I can turn the color corrected track on when I need to check something with it, but for playback functionality while editing, I'm limited to the raw camera files. 
    Obviously this is an imperfect solution.  But because I'm basically done editing and just need to do some title work and a little trimming, I can finish the project working that way. 
    Incidentally, tech support suggested major upgrades to my memory and video cards.  But if I were going to attempt to troubleshoot this further, I would upgrade to a better RAID system before I would do additional upgrades to my mac.  It really feels more likely that's the primary issue here. 

  • Satellite P505D-s3859 random slow down then crash

    I got the laptop with Windows Vista, had this problem (along with many other Vista related ones), so I formatted and installed Windows 7 with all the drivers hoping to fix it.  Same problem.  Doesn't seem to affect Ubuntu Linux when I dual boot over into that, but my laptop reliably crashes or has to be rebooted at least once or twice a day.
    The problem seems to be random, but let me describe the normal case that I'm in when it occurs.  I will be running Windows 7, multiple browsers, Yammer, Skype, dropbox, winamp and AVG.  The first, most obvious symptom is that any USB pariphials will stop working (I use a usb wireless mouse) and the sound will go into uber-slow motion mode.  At this point, everything on the laptop will be ultra slow to respond, but I can still close my apps down if I do it quickly.  If I'm not using any external usb nor listening to an audio file, and I miss the slow down event, the laptop will eventually crash.  
    When this happens, I ctrl-alt-del and check task manager, but I don't see anything particular using up all the resources.  I've updated everything I could with the windows 7 drivers from the toshiba site, but still have this problem.  It was affecting me with Windows Vista, and this is the second Windows 7 install I've done on this laptop, with the same symptoms.  
    This is the only thing I see in Event Viewer->Windows Logs->System:
    Log Name:      System
    Source:        Microsoft-Windows-Kernel-Processor-Power
    Date:          2/25/2011 5:46:41 PM
    Event ID:      37
    Task Category: (7)
    Level:         Warning
    Keywords:      
    User:          SYSTEM
    Computer:      sunwu
    Description:
    The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 7 seconds since the last report.
    Log Name:      System
    Source:        Microsoft-Windows-Kernel-Processor-Power
    Date:          2/25/2011 5:46:41 PM
    Event ID:      37
    Task Category: (7)
    Level:         Warning
    Keywords:      
    User:          SYSTEM
    Computer:      sunwu
    Description:
    The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 7 seconds since the last report.

    Satellite P505D-s3859
    Maybe this one? (It has all the digits.)
    Satellite P505D-S8935
    I'm not a hardware guru, but the problem seems consistent with a flaky hard drive. It certainly has nothing to do with software. See what chkdsk c: /r has to say.
    The entry in Event Viewer occurs when the processor is throttled back to save battery charge.
    -Jerry

  • Slow perfomarnce and freezes when trying to open Microsoft Publisher after refresh/reboot

    Hi,
    I just bought my HP laptop 2 months ago. Everything was okay, fast and really convenient until few days ago, upon turning on, it prompted a message saying I needed to refresh it. So I did, and afterwards, all my installed applications like skype, internet browsers, etc., were gone. I tried installing the apps again and everything went smoothly though a little slower. I thought I needed to update some applications for better performance, so I checked for some and tried installing them.
    Then yesterday, when I tried to open Microsoft Publisher, my laptop just suddenly froze. The mouse and keyboard didn't work so I had to turn it off using the main power switch. And everytime, I turned it on, everything was just slow.
    Can you help me fix the problem? Also, can you help me speed up its performance?
    Thanks a lot in advance.
    This question was solved.
    View Solution.

    Hi @blissss ,
    Thank you for visiting the HP Support Forums and Welcome. I will do my best to assist you. I have read about your HP 14-r024tx Notebook and having slow speeds. Thank you for all the information about what is happening.
    Something is slowing the Notebook down. Did you install some virus protection or a firewall? If you disable this are your speeds better. I had a DVD in my Notebook that slowed the startup process a lot. You might want to check that.
    Here is a document on improving your system. 
    Make sure all updates have been completed in the control panel or click the Windows key and start typing PC settings, then go to update.
    Please let me know how this goes.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Semi-New Macbook Pro 17" suddenly dark; won't reboot all the way

    My Macbook Proo was fine this afternoon.
    Went dark. Required restart.
    Each time I do, it gets a teeny bit of bargraph drawn, then goes dark.
    Basically, I can't restart (and it was fine.) Suggestions?

    You can also try a reset.
    Restart the computer holding down the command - option/alt - P - R keys before the grey screen appears. Continue to hold until you hear the startup chime for the second time.
    Reset NVRAM/PRAM
    Try an SMC reset. The article covers when this is required, but doing this will not affect anything.
    Reset SMC
    If the problem is still there, try booting into the Safe Mode.  Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    General information.
    Isolating issues in Mac OS X
    Troubleshooting Permission Issues
    Step by Step to Fix Your Mac

  • HT201210 tried to update my iphone.  There was an error and it went into recovery mode.  It goes all the way thru recovery and then says it has to do it again.

    Can't get my iphone out of recovery mode. 

    What, exactly, happens when you try to restore it?

  • Itunes won't open.  I deleted Itunes and reinstalled it. Itunes won't open.  I restarted my computer.  Itunes won't open.  I tried holding down Shift and Control when trying to open it.  Itunes won't open.  I AM SO FRIGGIN ****** OFF RIGHT NOW!

    What the **** do I do?

    Hello MADASHELL999,
    Thank you for providing the details of issue you have with iTunes not launching.  I would be concerned about this too. 
    You have taken some really good troubleshooting steps already to address this issue.  I found an article with a few additional steps you can take to further isolate and troubleshoot an issue like the one you described:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I'm trying to download ios 5 its gets all the way done downloading and then says theres an error in my network, i've tried to download it 8 times, what can i do?

    I  need help setting up my iso 5 i just keep getting an error message after its already fully loaded, it says error with network.

    If you have a Windoze PC, try temporarily disabling the antivirus, anti-adware, anti-spyware, and any other anti-whatever that is running and required with that secure OS before beginning the download.

  • Why is my 15'' macbook pro Early 2011 slowing down in performance often?

    Why is my 15'' macbook pro Early 2011 slowing down in performance often? It's barely got anything in it and it lags alot of times. This is supposedly running on quad-core i7 2.2 yet I have to restart at times to make sure it gets better. Why is that so?
    I turn on activity monitor and there aren't even anything taking up power or memory. It just lags out of the blue.

    Activity Monitor may still offer a clue. By default, it shows only "My Processes," those related to your user account. To see the real picture, you need to set AM to show "All Processes" as in this view:
    Click the header "%CPU" to sort by usage. Most true resource hogs are only apparent in this view.

  • Running slow and video ,pic dont down load all the way.

    HP Pavilion All-in-One MS227 Desktop PC     is running all the time and the video s and pic are so slow to load ,some times it dont load all the way and have to restart my pc. i was thinking i need to format my pc. but dont know how any help on and thing with my pc please let me know.

    Hello williamsherry,
    You want to reset your computer back to factory settings.
    First to make sure that you’re not having a problem with any of the hardware in the computer, run a diagnostics test.
    Turn off the computer.
    As you power it back on tap the F2 key. This will load hardware diagnostics.
    Run the start up test.
    This will test all the hardware in the system and detect any problems.
    If all tests pass you can run a recovery from the partition on the computer.
    Recovery from Windows 7
    If Windows 7 opens correctly, perform the following steps to start a system recovery from the Windows 7 start menu.
    Turn off the computer.
    Disconnect all connected devices and cables such as Personal Media Drives, USB drives, printers, and faxes. Remove media from internal drives, and remove any recently added internal hardware. Do not disconnect the monitor, keyboard, mouse, or power cord.
    Turn on the computer.
    Click Start, All Programs , Recovery Manager , and then click Recovery Manager again.
    If you are prompted for an Administrator password or confirmation, type the password or provide confirmation. If a User Account Control window asks if you want to allow the program to make changes to the computer, click Yes.
    Under I need help immediately, click System Recovery.
    The Recovery Manager asks if you want to restore the computer to its original factory shipped condition. Click Yes, and then click Next.
    The computer restarts. If the recovery partition on the hard disk drive is functioning correctly, the Recovery Manager window appears.
    Click System Recovery.
    When System Recovery prompts you to back up your files, select a backup option:
    If you have already backed up personal files or you do not want to back up personal files, select Recover without backing up your files, and then click Next. Continue to the next step.
    Click OK in the warning that appears.
    After the system recovery is complete, click Finish to restart the computer. Complete the setup screens and wait until the computer finishes the setup.
    Once the setup is complete, turn off the computer, reconnect all devices and cables, and then turn on the computer.
    Before using the computer, update and protect your computer. Reinstall any virus and security software that was installed before the system recovery.
    Reinstall any software programs that were added after purchasing the computer, as well as any files that were backed up.
    Here is a link on how to perform a system recovery.
    Clicking the White Kudos star on the left is a way to say Thanks!
    Let me know how everything goes.
    Have a good day.

  • Premiere Pro CC slows down, then  stops working, then won't work, then it won't quit

    Premiere Pro CC slows down, then  stops working, then won't work, then it won't quit. So I have to force quit every time.
    It does not matter if I am working with HD or 4K - same thing happens.
    This began happening about a week ago. Nothing really new has changed. I tried to repair permissions and check this from a new admin account because I know that is what Adobe thinks the answer to every problem is. But it did not change anything.
    Mac 10.10.2
    3.5 ghz 6-core
    Dual D700
    16GB Ram
    CC 2014

    Used this tip from Adobe and it worked, all running quick and smooth again.
    Hope it works for you too.
    http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/

Maybe you are looking for

  • Receiver From in BPM

    hi, When do we use Receivers List and when do we use Send Context in Receiver From in the SEND step of BPM. Thanks, Tirumal

  • Add a count to an ALV grid of the total number of lines

    Hi There I have a really long ALV report which prints lots of records. How can I add a total number of records count to appear in the header? I use the Grid display function to call the ALV grid. Any help appreciated

  • Ipad disabled still after hard reset

    Hello guys, My ipad is disabled, this happend just after I installed the new ios. I locked the ipad because I couldn't remember the 4 digit security system. I followed some instructions about rebooting it, and erasing everything using itunes and when

  • Modify range of x-scale value in excel

    Hi I'm stuck once more with this excel-activeX connection. I'd like to modify the range of the values that are chosen for the x-scale of a graph. How can I do that.  I know how to change the format and so on but couldn't find the data range. Thanks f

  • DD table transport

    Hallo Everybody, I have to transport a dictionary table from one system to another. Is there a way to insert table and all its data element and domains in a CR at once? Thank you very much indeed...